SN65HVD11D vs SN65HVD77D Comparação
Comparação detalhada lado a lado de SN65HVD11D por Texas Instruments e SN65HVD77D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ AtivoComparação de especificações
| Parâmetro | SN65HVD11D | SN65HVD77D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Differential transceiver | Full-duplex RS-485 transceiver |
| Supported Interfaces | RS-485 and RS-422 | — |
| Tensão de alimentação | 3.3 V | — |
| Driver Output State | Three-state | — |
| Receiver Architecture | Differential input | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Standards | ANSI TIA/EIA-485-A and ISO 8482:1993 | — |
| Temperatura de operação | -40 °C to +85 °C | — |
| Encapsulamento | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Contagem de pinos | 8 pins | — |
| Tipo de montagem | Surface mount | Surface mount |
| Output Current | [DATA_NEEDED: output current] | — |
| Taxa de dados | [DATA_NEEDED: maximum data rate] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Corrente de alimentação | [DATA_NEEDED: operating supply current] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Data Rate | — | 50 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±12 kV IEC |
| Faixa de temperatura de operação | — | -40°C to 125°C |
| Package Width | — | 3.90 mm |
| External Enable Controls | — | None |
| Driver Output Type | — | Differential |
| Receiver Output Type | — | Single-ended logic output |
| Low-Power Standby Current | — | Less than 5 µA when driver and receiver are disabled |
| Termination Requirement | — | External termination required |