SN65HVD11D vs SN65HVD77D Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD11D sa pamamagitan ng Texas Instruments at SN65HVD77D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Texas Instruments
SN65HVD11D SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D ✓ Nakahanda
Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SN65HVD11D SN65HVD77D
Brand Texas Instruments Texas Instruments
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Product Type Differential transceiver Full-duplex RS-485 transceiver
Supported Interfaces RS-485 and RS-422 —
Volte ng Pagbibigay 3.3 V —
Driver Output State Three-state —
Receiver Architecture Differential input —
Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Standards ANSI TIA/EIA-485-A and ISO 8482:1993 —
Temperature na Operasyon -40 °C to +85 °C —
Packhaging 8-pin SOIC (D) 8-pin SOIC (D)
Bilang ng Pin 8 pins —
Uri ng Pagpapasok Surface mount Surface mount
Output Current [DATA_NEEDED: output current] —
Rate ng Data [DATA_NEEDED: maximum data rate] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Kuru-kuryente ng Pagbibigay [DATA_NEEDED: operating supply current] —
Tindminan RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Supply Voltage Range — 3.0 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Maximum Data Rate — 50 Mbps
Number of Drivers — 1
Number of Receivers — 1
Duplex Mode — Full duplex
Supported Standards — RS-485 and RS-422
ESD Protection — ±12 kV IEC
Hanay ng Temperature na Operasyon — -40°C to 125°C
Package Width — 3.90 mm
External Enable Controls — None
Driver Output Type — Differential
Receiver Output Type — Single-ended logic output
Low-Power Standby Current — Less than 5 µA when driver and receiver are disabled
Termination Requirement — External termination required

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita