SN65HVD11D vs SN65HVD77D 比較

詳細並排比較 SN65HVD11D 由 Texas Instruments 與 SN65HVD77D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD11D SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D ✓ 啟用中
Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ 啟用中

規格比較

參數 SN65HVD11D SN65HVD77D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Differential transceiver Full-duplex RS-485 transceiver
Supported Interfaces RS-485 and RS-422 —
供應電壓 3.3 V —
Driver Output State Three-state —
Receiver Architecture Differential input —
Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Standards ANSI TIA/EIA-485-A and ISO 8482:1993 —
工作溫度 -40 °C to +85 °C —
封裝 8-pin SOIC (D) 8-pin SOIC (D)
腳位數 8 pins —
安裝類型 Surface mount Surface mount
Output Current [DATA_NEEDED: output current] —
資料速率 [DATA_NEEDED: maximum data rate] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
供應電流 [DATA_NEEDED: operating supply current] —
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Supply Voltage Range — 3.0 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Maximum Data Rate — 50 Mbps
Number of Drivers — 1
Number of Receivers — 1
Duplex Mode — Full duplex
Supported Standards — RS-485 and RS-422
ESD Protection — ±12 kV IEC
工作溫度範圍 — -40°C to 125°C
Package Width — 3.90 mm
External Enable Controls — None
Driver Output Type — Differential
Receiver Output Type — Single-ended logic output
Low-Power Standby Current — Less than 5 µA when driver and receiver are disabled
Termination Requirement — External termination required

資料表與資源

瀏覽所有產品 建立 BOM 索取報價