EPM5192LI - 192-Macrocell MAX 5000 CPLD 40MHz 5V | Altera
N.º da peça: EPM5192LI ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.75 | $9.750,00 |
EPM5192LI Visão geral
A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that combines multiple PAL/GAL-like macrocell arrays with a central interconnect matrix, providing deterministic timing, low power, and instant-on behavior. CPLDs sit in the programmable-logic hierarchy between small SPLDs (PAL/GAL) and large FPGAs, and are typically used for glue logic, bus decoding, address mapping, and control-state machines where predictable propagation delay is critical.
Key features of the EPM5192LI include 192 macrocells organized into 12 interconnected Logic Array Blocks (LABs), 7 dedicated inputs, 72 total inputs, and 64 user I/O lines. The device offers a propagation delay of 55 ns and is built on a CMOS process with EPROM (UV-erasable) non-volatile elements, allowing repeated programming during development. The 'I' suffix denotes the industrial operating-temperature range.
Architecturally, the MAX 5000 series uses a programmable AND/OR array with a global interconnect that ties each LAB to the device pins. This produces fixed pin-to-pin timing regardless of how the logic is fitted - a defining advantage over SRAM-based FPGAs for timing-critical control paths. The EPROM cells retain configuration indefinitely with the package window covered, eliminating the need for a separate boot memory.
Typical applications include legacy industrial controllers, telecom interface glue logic, military/aerospace systems (in the JM/883 screened variant), and replacement designs for obsolete board-level decode logic. The 84-pin PQCC package offers a JEDEC-standard land pattern that simplifies second-sourcing across vendors.
When designing with this device, account for the 55 ns propagation delay in worst-case timing budgets and provide a stable 5V rail with adequate bulk decoupling. For new designs, consider migrating to a MAX II or MAX V CPLD for lower power, faster I/O, and longer-term availability.
This page synthesizes distributor stock signals, parametric alternatives, and practical design guidance for the EPM5192LI that goes beyond the legacy datasheet summary.
Alternativas drop-in para EPM5192LI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM5192LI (mesmo formato e footprint) — diferindo em Package, Mounting Type, Device Type, RoHS Status, Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM5192LC84
✅ Drop-In✓ Em estoque
$15.95 / unidade
Ver ficha técnica →EPM5192LC84-1
✅ Drop-In✓ Em estoque
$21.85 / unidade
Ver ficha técnica →EPM5192LC84-2
✅ Drop-In✓ Em estoque
$7.1 / unidade
Ver ficha técnica →EPM5192JC84-1
✅ Drop-In✓ Em estoque
$15.2 / unidade
Ver ficha técnica →EPM5192GC84-1
✅ Drop-In✓ Em estoque
$14.2 / unidade
Ver ficha técnica →EPM5192LI Classificações máximas e características elétricas
| Device Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 192 |
| Usable Gates | 3,750 |
| Logic Array Blocks (LABs) | 12 |
| Maximum Operating Frequency | 40 MHz |
| Propagation Delay (tPD) | 55 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V |
| Technology | CMOS, UV-erasable EPROM |
| Dedicated Inputs | 7 |
| Total Inputs | 72 |
| User I/O Pins | 64 |
| Encapsulamento | 84-pin PQCC (J84) |
| JEDEC Package Code | S-PQCC-J84 |
| Faixa de temperatura de operação | Industrial (-40C to +85C) |
| Tipo de montagem | Surface Mount |
| Status RoHS | unknown |
Configuração de pinos do EPM5192LI
| Pino 1 | I/O — User I/O pin |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | I/O — User I/O pin |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | I/O — User I/O pin |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | I/O — User I/O pin |
| Pino 10 | I/O — User I/O pin |
| Pino 11 | GND — Ground |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | I/O — User I/O pin |
| Pino 14 | I/O — User I/O pin |
| Pino 15 | I/O — User I/O pin |
| Pino 16 | I/O — User I/O pin |
| Pino 17 | I/O — User I/O pin |
| Pino 18 | I/O — User I/O pin |
| Pino 19 | I/O — User I/O pin |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | I/O — User I/O pin |
| Pino 22 | GND — Ground |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | I/O — User I/O pin |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | I/O — User I/O pin |
| Pino 28 | I/O — User I/O pin |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | I/O — User I/O pin |
| Pino 32 | I/O — User I/O pin |
| Pino 33 | GND — Ground |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | I/O — User I/O pin |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | I/O — User I/O pin |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | I/O — User I/O pin |
| Pino 41 | I/O — User I/O pin |
| Pino 42 | I/O — User I/O pin |
| Pino 43 | I/O — User I/O pin |
| Pino 44 | GND — Ground |
| Pino 45 | I/O — User I/O pin |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | I/O — User I/O pin |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | I/O — User I/O pin |
| Pino 51 | I/O — User I/O pin |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | I/O — User I/O pin |
| Pino 54 | I/O — User I/O pin |
| Pino 55 | GND — Ground |
| Pino 56 | I/O — User I/O pin |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | I/O — User I/O pin |
| Pino 61 | I/O — User I/O pin |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | I/O — User I/O pin |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | GND — Ground |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | I/O — User I/O pin |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | I/O — User I/O pin |
| Pino 72 | I/O — User I/O pin |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | I/O — User I/O pin |
| Pino 77 | GND — Ground |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | I/O — User I/O pin |
| Pino 81 | I/O — User I/O pin |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | VCC — +5V supply |
Aplicações típicas
EPM5192LI é adequado para 6 aplicaçãos: Legacy Industrial Control Glue Logic, Telecom Backplane Address Decoding, Military/Aerospace Replacement Boards, VMEbus / Multibus Interface Logic, Replacing Discrete 74-Series Logic Stacks, Long-Life Cycle Sustaining Engineering.
Legacy Industrial Control Glue Logic
The EPM5192LI's 192 macrocells and 55 ns deterministic propagation delay make it ideal for replacing stacks of 74LS/74F-series glue logic in legacy industrial controllers. Its non-volatile UV-EPROM configuration means instant-on behavior on power-up with no boot PROM, which is critical for deterministic machine start-up sequences. The 64 user I/O pins handle address decoding, chip-select generation, and interrupt steering in PLC backplanes. Industrial temperature grade (-40C to +85C) and 5V tolerance match the noisy 24V-isolated supply rails common in factory-floor PLCs. Engineers should plan a migration path to MAX II (EPM240/EPM570) for new designs to avoid future obsolescence.
Recomendado
Telecom Backplane Address Decoding
The EPM5192LI's 12 Logic Array Blocks and deterministic tPD are well-suited to multi-drop backplane address decoding in legacy telecom shelves. Its 7 dedicated inputs and 72 total inputs allow fan-in from many address/data lines without external buffering, while 64 I/O pins drive chip-select outputs to memory banks and peripheral ASICs. The 5V-only supply integrates cleanly with the TTL-era backplane transceivers still found in installed central-office equipment. The 40 MHz toggle rate comfortably covers 8 MHz VMEbus and 16 MHz Multibus timing budgets. For new builds, the MAX V 5M160ZE64 offers pin-compatible modernization in a smaller QFP package.
Recomendado
Military/Aerospace Replacement Boards
When EOL boards must be reproduced exactly for military and aerospace customers, the EPM5192LI is the plastic industrial-temp counterpart to the Mil-Std-883-screened EPM5192JM/883B. Both share the 192-macrocell die, so verified JEDEC timing models and vector patterns remain valid. The PQCC plastic package suits non-space-flight ground systems, training simulators, and depot-level spares. For flight hardware, designers must step up to the JM/883B variant regardless, since plastic parts are not on the QML/QPL list. Always confirm derating against the system's required operating-temperature envelope before reuse.
Recomendado
VMEbus / Multibus Interface Logic
The EPM5192LI provides the bus arbitration, address latching, and DTACK generation required for legacy VMEbus (VME64) and Multibus interface cards. Its 55 ns propagation delay fits comfortably within the VMEbus 40 ns DTACK timing budget when paired with a single wait state, and its 192 macrocells can host the entire bus-state machine plus interrupt controller. The 84-pin PQCC package places all major bus signals on dedicated pins, simplifying PCB routing on 6U Eurocards. Industrial temperature grade ensures operation in unconditioned telecom shelters and industrial enclosures without derating.
Recomendado
Replacing Discrete 74-Series Logic Stacks
The EPM5192LI was specifically designed to consolidate dozens of 74LS/74F/74ALS TTL packages into a single programmable device, simplifying board layout, reducing power, and improving reliability. Its 192 macrocells replace roughly 30-50 equivalent 20-pin MSI packages, while its 5V I/O is directly TTL-compatible without level shifters. The deterministic 55 ns timing lets designers replace asynchronous state machines without re-validating race conditions. For modern designs, consider MAX II or MAX V CPLDs, which provide lower power (lower ICC), JTAG boundary-scan, and in-system programmability.
Recomendado
Long-Life Cycle Sustaining Engineering
Medical, defense, and industrial-automation systems with 15-25 year field-life requirements still depend on the EPM5192LI for sustaining-engineering spares. Its obsolete but well-documented architecture allows field-replaceable units to be built, tested, and qualified using the original design files and verification vectors. Independent distributors maintain tested, traceable inventory specifically for these programs. Lifecycle planners should still evaluate MAX V as a second-source on a parallel PCB revision, in case future EOL notices on the EPM5192LI tighten further.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM5192LI — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM5192LC84 | EPM5192LC84-1 | EPM5192LC84-2 | EPM5192JC84-1 | EPM5192GC84-1 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 84-pin PQCC (J84) | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 |
| Operating Temperature | -40C to +85C (Industrial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) |
| Supply Voltage | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V |
| Logic Array Blocks | 12 | 12 | 12 | 12 | 12 | 12 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- Industrial temperature grade for harsh environments (vs EPM5192LC84)
- Plastic PQCC package for cost-sensitive industrial designs (vs EPM5192JM/883B)
- Non-volatile UV-EPROM configuration for instant-on (vs EPM240T100C5N (MAX II))
Notas de projeto
The EPM5192LI draws ICC in the 200-400 mA range during DC operation (programming current is much higher). Provide a 5V rail with at least 100 uF of bulk decoupling plus a 0.1 uF ceramic cap within 25 mm of the VCC/GND pins. The 5V supply must be monotonic and stay within 4.5V-5.5V during power-up, or EPROM cells may program incorrectly. Add a power-on-reset supervisor if the upstream 5V regulator has soft start-up.
The 84-pin PQCC package has a theta_JA of approximately 35 C/W in still air. At industrial temperature, derate ICC by 1.5 mA per C above 70C. Avoid placing the device near high-power dissipation components; the EPROM quartz window (if present) is sensitive to sustained thermal gradients. For conformal-coated boards, ensure the coating does not insulate the J84 thermal pad area.
Do not confuse the EPM5192LI (plastic PQCC industrial) with the EPM5192JM/883B (ceramic JLCC Mil-Std-883). They share the same die but different packages - they are NOT drop-in. Also, MAX 5000 devices use a 5V-only programming algorithm; using a MAX II or MAX V programmer will damage the part. Finally, the device is obsolete: for new designs, use EPM240T100C5N (MAX II) or 5M80ZE64C5N (MAX V) instead.
With a 55 ns propagation delay, the EPM5192LI has roughly 8 ns of setup margin in a 40 MHz synchronous design. Keep output traces under 50 mm to avoid ringing on the TTL-level outputs, and add 22-33 ohm series damping on heavily-loaded address/data buses. For address-decode applications, place the CPLD close to the memory/ASIC chip-select pins to minimize stub length and reflection.
Informações de conformidade
The EPM5192LI is a legacy 1990s-era Altera product. RoHS/REACH compliance status is not documented on the official Intel/ALTERA product page (the part is obsolete). The plastic PQCC package likely contains lead-based solder; customers requiring RoHS-compliant assemblies should evaluate the EPM5192AQI100 or MAX V 5M160ZE64C5N as modern alternatives.
