EPM5192JM/883B - 192 Macrocells MAX 5000 CPLD, 55ns, CDIP-28
MPN: EPM5192JM/883B ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $256.5 | $2,565.00 |
| 100 | $228 | $22,800.00 |
| 500 | $199.5 | $99,750.00 |
| 1,000 | $171 | $171,000.00 |
Drop-in alternatives for EPM5192JM/883B — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
EPM5192JM/883
✅ Drop-In✓ In Stock
$195 / Unit
View Datasheet →EPM5192JM-1/883B
✅ Drop-In✓ In Stock
$108 / Unit
View Datasheet →EPM5192JM-2/883B
✅ Drop-In✓ In Stock
$140 / Unit
View Datasheet →EPM5192GM/883B
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$118 / Unit
View Datasheet →EPM5192JM/883B Maximum Ratings & Electrical Characteristics
| Device Family | MAX 5000 |
| Device Type | EPLD (UV-erasable CMOS Programmable Logic Device) |
| Macrocells | 192 |
| User I/O Pins | 64 |
| Total Inputs (incl. dedicated) | Up to 72 |
| Propagation Delay (tPD) | 55 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (5 V nominal) |
| Technology | CMOS, UV-erasable |
| Package | CDIP-28 (J-lead, windowed ceramic) |
| Mounting Type | Through-hole, socketed |
| Operating Temperature (MIL grade) | -55C to +125C |
| Screening | MIL-STD-883B |
| Programming Method | UV erasure + Altera Byteblaster / device programmer |
EPM5192JM/883B cdip-28 (j-lead, windowed ceramic) Pin Configuration Guide
Complete pinout information for EPM5192JM/883B (cdip-28 (j-lead, windowed ceramic) package) with 64 pins. This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for EPM5192JM/883B.
Refer to the datasheet for full pin configuration.
Estimated pin count: 64 pins (digital package)
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this digital IC. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
EPM5192JM/883B is suitable for 6 applications: Military Avionics Bus Interface, Industrial Control Glue Logic Replacement, VME/cPCI Backplane Address Decoding, Legacy 5V State Machine Consolidation, High-Reliability Communication Infrastructure, Aerospace Test & Measurement Equipment.
Military Avionics Bus Interface
The EPM5192JM/883B fits MIL-STD-1553, ARINC 429, and discrete avionics glue-logic roles because of its MIL-STD-883B screening, -55C to +125C operating range, and 192-macrocell capacity to handle bus arbitration, parity, and encoding in a single chip. Its 55 ns propagation delay is sufficient for the kbps-to-low-Mbps data rates typical of legacy avionics buses, and the UV-windowed CDIP-28 package allows in-the-field reprogramming during flight-test iterations. Compared with discrete 54LS/74AS glue, it collapses dozens of packages into one, cutting board area and improving reliability in vibration-prone airframes. Source: Altera MAX 5000 datasheet.
Recommended
Industrial Control Glue Logic Replacement
In long-lifecycle industrial controllers, the EPM5192JM/883B replaces dozens of 74LS/74HC glue-logic packages with a single programmable part, reducing board area, BOM count, and failure surface. The 192 macrocells easily encode state machines for motor control sequencing, sensor multiplexing, and relay drivers. MIL-STD-883B screening provides robustness against temperature, vibration, and humidity in factory-floor and process-control enclosures, while the UV-windowed CDIP-28 package supports on-site firmware updates via standard Altera programmers. Estimated power consumption at 5V/typical toggle rate is in the low hundreds of mW - acceptable for sealed industrial cabinets.
Recommended
VME/cPCI Backplane Address Decoding
The EPM5192JM/883B is well-suited for address decoding and interrupt steering on legacy VMEbus and cPCI backplanes. Its 192 macrocells comfortably decode multi-bit board addresses, generate chip-select strobes for local memory and peripherals, and arbitrate interrupts - all in one deterministic-timed device. The 55 ns propagation delay fits VMEbus access timing windows with no timing-closure surprises, and the 64 user I/Os handle ample address/data bus fan-out. The CDIP-28 windowed ceramic package fits standard 28-pin DIP sockets, simplifying retrofitting of older 5 V backplane cards without redesign.
Recommended
Legacy 5V State Machine Consolidation
Engineers maintaining legacy 5V systems use the EPM5192JM/883B to consolidate discrete 74LS181/74LS244 state machines into a single, reprogrammable device. With 192 macrocells and deterministic timing, complex sequencers, timers, and controllers fit easily, while the MIL-STD-883B screening ensures the part survives harsh environments. The CDIP-28 windowed ceramic package is field-programmable with a UV eraser, allowing in-service firmware updates without removing the device from the board. The 5V supply is natively compatible with TTL logic rails, eliminating level translation that would be required by 3.3V modern CPLDs.
Recommended
High-Reliability Communication Infrastructure
The EPM5192JM/883B is used in military communication and naval systems for protocol conversion, line-interface glue, and timing generation. Its MIL-STD-883B Class B screening, ceramic CDIP-28 package, and -55C to +125C operating range satisfy long-deployment programs where COTS plastic parts cannot be qualified. With 64 user I/Os, it can drive multiple serial links or bus interfaces concurrently, and the 55 ns timing margin allows generous trace lengths on backplane wiring. The deterministic interconnect also simplifies DO-254/DO-178 adjacent verification flows required in safety-critical comms programs.
Recommended
Aerospace Test & Measurement Equipment
Test and measurement instrumentation for aerospace applications benefits from the EPM5192JM/883B's combination of MIL-STD-883B screening, 192 macrocells, and 64 user I/Os. Engineers can implement multiplexers, trigger logic, waveform generators, and timing-and-control sequencers in a single part, with predictable 55 ns timing for accurate measurement windows. The UV-windowed CDIP-28 package enables iterative firmware development in the lab, and the ceramic construction withstands the temperature cycling seen in avionics bay test stands. Long-term availability through authorized brokers keeps fielded testers supportable for decades.
Recommended
Recommended Products Summary
Engineering reference data for EPM5192JM/883B — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | EPM5192JM/883 | EPM5192JM-1/883B | EPM5192JM-2/883B | EPM5192GM/883B |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | CDIP-28 (J-lead, windowed ceramic) | CDIP-28 (J-lead, windowed ceramic) - same | CDIP-28 (J-lead, windowed ceramic) - same | CDIP-28 (J-lead, windowed ceramic) - same | PGA (ceramic pin grid array) - different |
| Macrocells | 192 | 192 | 192 | 192 | 192 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 |
| Propagation Delay (tPD) | 55 ns | 55 ns | [DATA_NEEDED] | [DATA_NEEDED] | 55 ns |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Screening | MIL-STD-883B | MIL-STD-883 (Class B) | MIL-STD-883B | MIL-STD-883B | MIL-STD-883B |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Programming Method | UV-erasable (windowed) | UV-erasable | UV-erasable | UV-erasable | UV-erasable (windowed PGA) |
Key Differentiators
- Largest macrocell density in MAX 5000 family (vs EPM5130 family)
- MIL-STD-883B screened, windowed ceramic CDIP-28 (vs EPM5192JI-2 (industrial plastic))
- UV-erasable, field-reprogrammable (vs OTP MAX 5000 variants)
Design Notes
Estimated: at VCC=5.25V, 25 MHz toggle across 192 macrocells, ICC will be roughly 200-400 mA, dissipating about 1-2W. The CDIP-28 ceramic package has a higher theta_JA than plastic equivalents, so adequate airflow or heat-sinking through the ceramic body may be required in sealed enclosures. Verify junction temperature against the MIL-STD-883B -55C to +125C operating range with worst-case ambient and duty-cycle assumptions.
The CDIP-28 J-lead package requires a through-hole socket or plated-through-hole footprint with 0.1 inch (2.54 mm) row spacing. Preserve a UV-transparent ceramic window above the package if in-field erasure is anticipated; shade the window from direct sunlight to prevent accidental erasure. Place 0.1 uF decoupling capacitors on every VCC pin pair and keep them within 5 mm of the device leads to control switching noise on the 5 V rail.
Do not confuse EPM5192JM/883B (ceramic J-lead windowed DIP) with EPM5192GM/883B (ceramic PGA), EPM5192JI-2 (industrial plastic J-lead), or EPM5192GM/8883 (typographical suffix variant). Only /883B-screened parts are acceptable as direct MIL-program replacements. Be aware that the MAX 5000 family is obsolete and MAX+PLUS II legacy design files may require recompilation in current Altera/Intel Quartus tools before re-programming.
Route programming signals to a header or test point so the device can be erased and reprogrammed in-circuit if a UV eraser and Altera-compatible device programmer are available. Avoid placing tall components directly above the ceramic window where they could shadow the UV lamp. For high-vibration environments, use a latched or screw-down socket rather than a friction-fit DIP socket to prevent intermittent contact.
Compliance Information
Compliance information not explicitly provided in the Verified Web Data. The CDIP-28 ceramic package and /883B screening suggest a heritage military/aerospace part that pre-dates widespread RoHS adoption; verify compliance with the specific distributor lot before using in RoHS-restricted designs.
