Altera

EPM7192SQC160-10N - 192-Macrocell MAX 7000S CPLD, 10ns, 160-Pin PQFP | Altera

Name: EPM7192SQC160-10N - 192-Macrocell MAX 7000S CPLD, 10ns, 160-Pin PQFP | Altera
Brand: Altera
SKU: EPM7192SQC160-10N
Price: 9.95 USD
Availability: InStock

N.º da peça: EPM7192SQC160-10N ✗ Fim de vida

Em estoque Enviado em 1 a 3 dias úteis

5.0 V Vdss 160-BQFP (PQFP, 0.65 mm pitch) Package 100 MHz Speed

A partir de $9.95 USD / unidade

MOQ: 1 |

Preço atualizado: 2026-09-12

Preços por volume

Qtd.	Preço unitário	Total
1	$18.5	$18,50
10	$16.2	$162,00
100	$13.85	$1.385,00
500	$11.4	$5.700,00
1.000	$9.95	$9.950,00

ℹ️ Todos os preços estão em USD

Ver datasheet (PDF) Ver alternativas

Quantidade

EPM7192SQC160-10N Visão geral

The Altera EPM7192SQC160-10N is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 7000S family, delivering 192 macrocells, 3,750 usable gates, and a 10 ns pin-to-pin logic delay in a 160-pin Plastic Quad Flat Pack (PQFP/BQFP) package. It supports 124 user I/O pins and operates from a 5.0 V core supply with 5.0 V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface. According to the manufacturer datasheet, the device is fabricated on a 0.30 µm CMOS EEPROM process and supports system frequencies up to 100 MHz.

A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell blocks interconnected by a programmable switch matrix. Within the broader semiconductor taxonomy, a CPLD sits between simple SPLDs (e.g., PAL/GAL) and FPGAs, offering deterministic timing, instant-on configuration from on-chip EEPROM, and high fan-in logic — making it ideal for glue logic, bus decoding, and interface bridging. The MAX 7000S series specifically adds in-system programmability via JTAG, enabling field upgrades without removing the device from the board.

Key differentiating features of the EPM7192SQC160-10N include its 12 Logic Array Blocks (LABs) of 16 macrocells each, a programmable speed/power optimization mode that lets speed-critical portions of a design run at full speed while other portions run at 50% lower power with only a nominal timing penalty, and four dedicated global clock inputs. Each macrocell contains a programmable AND/OR/flip-flop array with configurable clear, preset, and clock modes. The device supports multiple I/O standards including 5.0 V CMOS and 3.3 V PCI-compatible signaling through its JTAG-configurable I/O structure.

The MAX 7000S architecture provides predictable, deterministic timing because every logic path traverses the same predictable interconnect structure — unlike SRAM-based FPGAs that require device configuration on power-up. This makes the EPM7192SQC160-10N particularly well-suited to applications where instant-on behavior is critical and where designers need fixed propagation delays for worst-case timing analysis. The 10 ns tPD (pin-to-pin delay) of this -10N speed grade supports clock frequencies up to 100 MHz in combinatorial paths.

Typical applications include address decoding for microprocessor and DSP systems, bus interfacing and arbitration logic (e.g., between an MCU and external peripherals), state-machine control for industrial automation, peripheral chip-select generation, and glue-logic replacement of discrete TTL/CMOS parts. Designers frequently choose this part when they need non-volatile, deterministic logic with the convenience of JTAG in-system reprogrammability.

When designing with this device, pay careful attention to I/O bank supply pin requirements — VCCINT and VCCIO may need separate rails depending on the mixed-voltage interface scheme, and unused pins should be configured as outputs driving ground to minimize power. The 160-pin PQFP footprint requires careful PCB routing given the 0.65 mm pitch; an external JTAG header is recommended for ISP access during prototyping and field firmware updates.

This page synthesizes distributor pricing, drop-in same-package alternatives from the MAX 7000S family, and practical design considerations not aggregated in any single manufacturer document.

Alternativas drop-in para EPM7192SQC160-10N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EPM7192SQC160-10N (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Usable Gates, Supply Voltage (VCCINT), RoHS Status.

EPM7128SQC160-10N

Intel

Package: 160-pin PQFP

Operating Temperature: -40C to +85C (industrial, N suffix)

Usable Gates: 2,500