MAX232CEASE+ - 5V 2/2 RS-232 Transceiver | Analog Devices
N.º da peça: MAX232CEASE+ ✓ AtivoMAX232CEASE+ Visão geral
An RS-232 transceiver is an interface IC positioned between digital logic and a serial communications connector. Within the product hierarchy, it belongs to the RS-232 interface transceiver family and the broader category of interface ICs. Its two-driver, two-receiver arrangement supports one bidirectional RS-232 channel or two unidirectional channels, depending on how the pins are connected. Unlike a UART, which generates and interprets serial data but does not provide RS-232 voltage levels, the MAX232CEASE+ performs the physical-layer conversion between CMOS/TTL logic and RS-232.
The principal features are a +5 V supply, two transmit drivers, two receive receivers, full RS-232 operation, and a 16-pin SOIC footprint. The integrated charge-pump circuitry supports the positive and negative signal swings required at the driver outputs while the receiver inputs handle the bipolar RS-232 signal range. This makes the device useful where a modern microcontroller or application-specific controller has a UART but lacks a physical RS-232 level-shifting interface.
The MAX232 family is specified for EIA/TIA-232E and V.28/V.24 communications interfaces, including designs where ±12 V is unavailable. The single-supply architecture simplifies implementation compared with a discrete bipolar level-shifter circuit. Its 2/2 channel organization also provides flexibility for two independent transmit-only or receive-only links when all four interface pins are not needed in a single bidirectional port.
Typical applications include industrial serial adapters, test and measurement equipment, computer peripherals, security systems, and embedded-control subsystems. In each case, the transceiver provides the electrical interface between a low-voltage UART and an RS-232 port while keeping the host-side logic supply at +5 V.
PCB implementation should prioritize short driver traces, controlled return paths, and proper connection of the charge-pump capacitors specified by the manufacturer. External protection may be required when the RS-232 cable is exposed to electrostatic discharge or when the connected equipment uses longer cables.
This page combines the manufacturer interface description, package information, verified replacement candidates, comparison guidance, and practical PCB design notes. These engineering details help evaluators determine pin compatibility, electrical suitability, and implementation trade-offs before committing the MAX232CEASE+ to an RS-232 design.
Alternativas drop-in para MAX232CEASE+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX232CEASE+ (mesmo formato e footprint) — diferindo em Interface Standard, Package, Product Type, ESD Protection, Supply Voltage.
MAX232CASE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232ACSE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232ECSE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232EESE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232ACWE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232ECSE+
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MAX232CEASE+ Especificações
| Product Type | RS-232 transceiver |
| Tensão de alimentação | +5 V |
| Transmitter Configuration | 2/2 |
| Driver Count | 2 |
| Receiver Count | 2 |
| Interface Standard | EIA/TIA-232E and V.28/V.24 |
| Encapsulamento | 16-SOIC |
| Contagem de pinos | 16 pins |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do MAX232CEASE+ 16-soic
Configuração de pinos para MAX232CEASE+ (pacote 16-soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX232CEASE+.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX232CEASE+ é adequado para 6 aplicaçãos: Industrial RS-232 Adapter, Computer Peripheral Interface, Test and Measurement Equipment, Security and Access Control, Embedded Serial Communication, Data Acquisition and Control.
Industrial RS-232 Adapter
The MAX232CEASE+ fits an industrial serial adapter that exposes a 5 V UART controller through a conventional RS-232 connector. Its two drivers and two receivers support one bidirectional port while leaving a second driver-receiver pair available for an additional unidirectional link. The single +5 V supply simplifies system power design, while the integrated charge-pump function eliminates a separate bipolar RS-232 level-shifter. Place the IC near the connector, keep capacitor loops compact, and add cable-side transient protection when the adapter connects to field equipment.
Recomendado
Computer Peripheral Interface
The MAX232CEASE+ provides the physical RS-232 interface between a legacy peripheral port and a 5 V embedded controller. Its 2/2 channel arrangement allows a full-duplex console link or separate command and status paths, depending on connector assignment. Because the transceiver operates from +5 V and provides the required bipolar line levels internally, the controller can use a UART without external RS-232 transistors. Validate signal polarity, connector numbering, and grounding against the peripheral specification before fabrication.
Recomendado
Test and Measurement Equipment
The MAX232CEASE+ is appropriate for test and measurement equipment that retains an RS-232 control or service port. The two transmitters and two receivers can support one bidirectional command interface and a second status channel, improving instrument utilization without adding another transceiver package. Operating the entire interface from +5 V simplifies instrument power architecture, and the EIA/TIA-232E-oriented family targets legacy automation equipment. Keep the transceiver away from precision analog sections and use controlled grounding to prevent ground-current noise from affecting measurements.
Recomendado
Security and Access Control
The MAX232CEASE+ can bridge a 5 V access-control controller to an RS-232 reader, lock controller, or alarm interface. Two drivers and two receivers permit a bidirectional service channel and a dedicated one-way status indication when the system needs both. The single 5 V rail is convenient for embedded security equipment, while the transceiver handles RS-232 line conversion at the board edge. For door panels and long cable runs, add coordinated surge and electrostatic-discharge protection and verify the grounding strategy with the connected system.
Recomendado
Embedded Serial Communication
The MAX232CEASE+ is useful in embedded-control boards that retain a service or configuration port implemented through RS-232. A microcontroller can communicate through its UART while the transceiver converts logic levels to and from the bipolar interface. The two transmitter and two receiver channels provide enough connectivity for one full-duplex port plus an auxiliary direction, or for two differently assigned channels. Ensure the firmware uses the correct polarity and baud rate, and keep the RS-232 traces physically separated from high-current switching nodes.
Recomendado
Data Acquisition and Control
The MAX232CEASE+ can provide a legacy control connection in a data-acquisition system whose modern controller uses a UART. The +5 V transceiver simplifies the interface between embedded control electronics and RS-232-compatible instruments, while the two transmitter and two receiver channels support command and data paths. Place the transceiver at the connector side of the PCB and route it away from sensitive sensor inputs. Confirm the instrument's request-to-send, ready-to-send, and logic-polarity conventions before implementing the handshake.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX232CEASE+ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX232CASE+ | MAX232ACSE+ | MAX232ECSE+ | MAX232EESE+ | MAX232ACWE+ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Driver and Receiver Count | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 |
| Interface Standard | EIA/TIA-232E and V.28/V.24 | EIA/TIA-232E and V.28/V.24 | EIA/TIA-232E and V.28/V.24 | EIA/TIA-232E and V.28/V.24 | EIA/TIA-232E and V.28/V.24 | EIA/TIA-232E and V.28/V.24 |
| Ordering Grade | E grade | C grade | A grade | C grade | E grade | A grade |
Principais diferenciais
- Two transmitters and two receivers in one 16-SOIC package (vs MAX202EEWE-T)
- Single +5 V implementation (vs MAX232CASE+)
- Supports bidirectional and split unidirectional RS-232 links (vs MAX202EEWE-T)
Notas de projeto
Place the MAX232CEASE+ close to the RS-232 connector and connect the charge-pump capacitors using short traces with a compact ground return. The manufacturer application circuit should be used as the layout reference because long capacitor loops can increase supply and radiated noise. Keep the transceiver and protected cable-side nodes away from precision analog inputs, switching regulators, and high-speed clock traces.
Do not treat the MAX232CEASE+ as a complete surge-protection solution. The transceiver converts logic levels to RS-232 but does not eliminate the need for suitable protection on exposed cable connections. Select protection with voltage, capacitance, and clamping characteristics compatible with the required data rate, and connect its return path to the correct signal or chassis-ground arrangement.
Confirm the package width and land pattern before substituting an ordering-code variant in the MAX232 family. The suffix controls ordering attributes such as temperature grade and SOIC width, so a shared 16-pin designation does not by itself guarantee identical PCB compatibility. Compare the manufacturer package drawing, minimum copper spacing, exposed connections, and assembly requirements before releasing a substitute to production.
Informações de conformidade
Compliance attributes require confirmation for the exact MAX232CEASE+ ordering code. The manufacturer product page identifies the MAX232 family as production; it does not by itself establish the target part's individual compliance status.