Analog Devices

MAX232CEASE+ - 5V 2/2 RS-232 Transceiver | Analog Devices

部品番号: MAX232CEASE+ ✓ 生産中
+5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX232CEASE+ 概要

The Analog Devices MAX232CEASE+ is a +5 V-powered RS-232 transceiver containing two drivers and two receivers in a 16-pin SOIC package. It converts logic-level UART signals to and from RS-232 line levels, allowing equipment with a serial controller to communicate through a conventional RS-232 port. The device operates from a single 5 V supply while producing the bipolar voltage levels required by RS-232 interfaces.

An RS-232 transceiver is an interface IC positioned between digital logic and a serial communications connector. Within the product hierarchy, it belongs to the RS-232 interface transceiver family and the broader category of interface ICs. Its two-driver, two-receiver arrangement supports one bidirectional RS-232 channel or two unidirectional channels, depending on how the pins are connected. Unlike a UART, which generates and interprets serial data but does not provide RS-232 voltage levels, the MAX232CEASE+ performs the physical-layer conversion between CMOS/TTL logic and RS-232.

The principal features are a +5 V supply, two transmit drivers, two receive receivers, full RS-232 operation, and a 16-pin SOIC footprint. The integrated charge-pump circuitry supports the positive and negative signal swings required at the driver outputs while the receiver inputs handle the bipolar RS-232 signal range. This makes the device useful where a modern microcontroller or application-specific controller has a UART but lacks a physical RS-232 level-shifting interface.

The MAX232 family is specified for EIA/TIA-232E and V.28/V.24 communications interfaces, including designs where ±12 V is unavailable. The single-supply architecture simplifies implementation compared with a discrete bipolar level-shifter circuit. Its 2/2 channel organization also provides flexibility for two independent transmit-only or receive-only links when all four interface pins are not needed in a single bidirectional port.

Typical applications include industrial serial adapters, test and measurement equipment, computer peripherals, security systems, and embedded-control subsystems. In each case, the transceiver provides the electrical interface between a low-voltage UART and an RS-232 port while keeping the host-side logic supply at +5 V.

PCB implementation should prioritize short driver traces, controlled return paths, and proper connection of the charge-pump capacitors specified by the manufacturer. External protection may be required when the RS-232 cable is exposed to electrostatic discharge or when the connected equipment uses longer cables.

This page combines the manufacturer interface description, package information, verified replacement candidates, comparison guidance, and practical PCB design notes. These engineering details help evaluators determine pin compatibility, electrical suitability, and implementation trade-offs before committing the MAX232CEASE+ to an RS-232 design.

ドロップイン代替品: MAX232CEASE+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX232CEASE+ (同一形状・フットプリント) — 相違点: Interface Standard, Package, Product Type, ESD Protection, Supply Voltage.

Analog Devices
Package: 16-pin SOIC, 3.9 mm nominal body width
Product Type: RS-232 line driver and receiver transceiver
比較対象 MAX232CEASE+ →
Maxim Integrated
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
比較対象 MAX232CEASE+ →
Maxim Integrated
Interface Standard: EIA/TIA-232E, V.28, and V.24
Package: 16-pin SOIC
ESD Protection: ±2 kV
比較対象 MAX232CEASE+ →
Analog Devices
Interface Standard: RS-232
Package: 16-pin SOIC
Supply Voltage: 5 V
比較対象 MAX232CEASE+ →
Analog Devices
Interface Standard: RS-232 and V.28
Package: 16-SOIC (NSOIC)
ESD Protection: ±15 kV HBM
比較対象 MAX232CEASE+ →
Analog Devices
Interface Standard: EIA/TIA-232E and CCITT V.28
Package: 16-pin narrow SOIC
Product Type: Dual RS-232 transceiver with integrated charge pump
比較対象 MAX232CEASE+ →

MAX232CASE+

✅ ドロップイン ⚠️ 仕様未検証
Maxim Integrated
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full duplex · EIA/TIA-232E, V.28, and V.24 · 4.5 V to 5.5 V · 5 V · 120 kbps

価格はお問い合わせください

データシートを見る →

MAX232ACSE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-SOIC
RS-232 line driver and receiver transceiver · +5 V · 2 transmitters · 2 receivers · EIA/TIA-232E and V.28/V.24 · 16-pin SOIC, 3.9 mm nominal body width · Surface mount · 2/2 transceiver configuration

価格はお問い合わせください

データシートを見る →

MAX232ECSE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 drivers / 2 receivers · 120 kbps · +5 V · RS-232 and V.28 · ±15 kV HBM · Integrated · No external ±10 V supply required

価格はお問い合わせください

データシートを見る →

MAX232EESE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

価格はお問い合わせください

データシートを見る →

MAX232ACWE+

✅ ドロップイン ⚠️ 仕様未検証
Maxim Integrated
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 2 transmitters / 2 receivers · +5 V · EIA/TIA-232E and V.28/V.24 · 16-pin SOIC · Surface mount

価格はお問い合わせください

データシートを見る →

MAX232ECSE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 drivers / 2 receivers · 120 kbps · +5 V · RS-232 and V.28 · ±15 kV HBM · Integrated · No external ±10 V supply required

価格はお問い合わせください

データシートを見る →

MAX232CEASE+ 仕様

Product Type RS-232 transceiver
電源電圧 +5 V
Transmitter Configuration 2/2
Driver Count 2
Receiver Count 2
Interface Standard EIA/TIA-232E and V.28/V.24
パッケージ 16-SOIC
ピン数 16 pins
実装タイプ Surface mount

MAX232CEASE+ 16-soic ピン配置ガイド

MAX232CEASE+ (16-soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX232CEASE+ の 16-soic パッケージピン配置図

詳細なピン配置データはありません: MAX232CEASE+.

詳細は データシート をご参照ください。

主な用途

MAX232CEASE+ の用途: 6 件s: Industrial RS-232 Adapter, Computer Peripheral Interface, Test and Measurement Equipment, Security and Access Control, Embedded Serial Communication, Data Acquisition and Control.

🏭

Industrial RS-232 Adapter

The MAX232CEASE+ fits an industrial serial adapter that exposes a 5 V UART controller through a conventional RS-232 connector. Its two drivers and two receivers support one bidirectional port while leaving a second driver-receiver pair available for an additional unidirectional link. The single +5 V supply simplifies system power design, while the integrated charge-pump function eliminates a separate bipolar RS-232 level-shifter. Place the IC near the connector, keep capacitor loops compact, and add cable-side transient protection when the adapter connects to field equipment.

🖥️

Computer Peripheral Interface

The MAX232CEASE+ provides the physical RS-232 interface between a legacy peripheral port and a 5 V embedded controller. Its 2/2 channel arrangement allows a full-duplex console link or separate command and status paths, depending on connector assignment. Because the transceiver operates from +5 V and provides the required bipolar line levels internally, the controller can use a UART without external RS-232 transistors. Validate signal polarity, connector numbering, and grounding against the peripheral specification before fabrication.

🔧

Test and Measurement Equipment

The MAX232CEASE+ is appropriate for test and measurement equipment that retains an RS-232 control or service port. The two transmitters and two receivers can support one bidirectional command interface and a second status channel, improving instrument utilization without adding another transceiver package. Operating the entire interface from +5 V simplifies instrument power architecture, and the EIA/TIA-232E-oriented family targets legacy automation equipment. Keep the transceiver away from precision analog sections and use controlled grounding to prevent ground-current noise from affecting measurements.

🎥

Security and Access Control

The MAX232CEASE+ can bridge a 5 V access-control controller to an RS-232 reader, lock controller, or alarm interface. Two drivers and two receivers permit a bidirectional service channel and a dedicated one-way status indication when the system needs both. The single 5 V rail is convenient for embedded security equipment, while the transceiver handles RS-232 line conversion at the board edge. For door panels and long cable runs, add coordinated surge and electrostatic-discharge protection and verify the grounding strategy with the connected system.

🧩

Embedded Serial Communication

The MAX232CEASE+ is useful in embedded-control boards that retain a service or configuration port implemented through RS-232. A microcontroller can communicate through its UART while the transceiver converts logic levels to and from the bipolar interface. The two transmitter and two receiver channels provide enough connectivity for one full-duplex port plus an auxiliary direction, or for two differently assigned channels. Ensure the firmware uses the correct polarity and baud rate, and keep the RS-232 traces physically separated from high-current switching nodes.

📡

Data Acquisition and Control

The MAX232CEASE+ can provide a legacy control connection in a data-acquisition system whose modern controller uses a UART. The +5 V transceiver simplifies the interface between embedded control electronics and RS-232-compatible instruments, while the two transmitter and two receiver channels support command and data paths. Place the transceiver at the connector side of the PCB and route it away from sensitive sensor inputs. Confirm the instrument's request-to-send, ready-to-send, and logic-polarity conventions before implementing the handshake.

What is the MAX232CEASE+?
The MAX232CEASE+ is a +5 V-powered, 2/2 RS-232 transceiver from Analog Devices, with two transmit drivers and two receive receivers in a 16-pin SOIC package. According to the Analog Devices MAX232 data sheet, Rev. 18, it implements EIA/TIA-232E and V.28/V.24 interfaces and is intended for systems in which ±12 V is unavailable. It converts low-voltage UART logic to and from bipolar RS-232 line levels.
What voltage does the MAX232CEASE+ require?
The MAX232CEASE+ operates from a single +5 V supply. The manufacturer identifies the MAX232 family as a +5 V-powered RS-232 driver and receiver family, allowing the host logic and transceiver to share a conventional 5 V rail. According to the Analog Devices MAX232 data sheet, Rev. 18, the internal charge-pump circuitry develops the positive and negative voltage excursions required at the RS-232 driver outputs without requiring an external ±12 V supply.
Where can I download the MAX232CEASE+ datasheet PDF?
The official MAX232CEASE+ documentation is available through the Analog Devices MAX232 product page at https://www.analog.com/en/products/MAX232.html. That page links to the manufacturer data sheet, identified on the product listing as Rev. 18, along with ordering and product information. Use the manufacturer's pin-description table and electrical-characteristics tables when assigning PCB functions, selecting bypass capacitors, and verifying operating limits for the exact MAX232CEASE+ ordering code.
Where is the MAX232CEASE+ pinout?
The MAX232CEASE+ pinout is presented in the pin-description table of the Analog Devices MAX232 data sheet, Rev. 18, which is linked from the official MAX232 product page. The device uses a 16-pin SOIC package. Assign each external connection by the function listed in the manufacturer pin table rather than relying solely on a generic SOIC-16 drawing, because driver, receiver, supply, ground, and charge-pump capacitor pins must follow the exact package drawing.
Can the MAX232CEASE+ replace a MAX232CASE+?
The MAX232CEASE+ can be considered as a candidate for a MAX232CASE+ replacement because both are 16-SOIC MAX232 2/2 transceivers, but the E and C ordering variants require temperature and qualification review before substitution. The Analog Devices MAX232 data sheet, Rev. 18, provides the ordering information needed to compare grade, package width, and operating range. Confirm every connected pin and the required temperature range rather than treating the shared family name as automatic qualification.
What can replace the MAX232CEASE+ on the same PCB?
The closest documented drop-in candidates are same-package MAX232 family variants such as MAX232CASE+, MAX232ACSE+, MAX232ECSE+, and MAX232EESE+. All use the MAX232 2/2 RS-232 architecture in a 16-SOIC package, while their ordering codes distinguish temperature, qualification, or lead-processing options. Before replacement, compare the Analog Devices ordering table, pin table, operating-temperature requirements, and package dimensions for the exact suffix.
MAX232CEASE+ vs MAX232CASE+ - which should I choose?
Choose the MAX232CEASE+ when the design requires the E-grade operating range specified for that ordering code; choose the MAX232CASE+ when the C-grade range is adequate and its qualification attributes better match the application. Both provide two RS-232 drivers and two receivers in a 16-SOIC package according to the Analog Devices MAX232 data sheet, Rev. 18. The decisive comparison is the ordering-table temperature and qualification grade, not the shared transceiver function.
When should I choose MAX232CEASE+ over another MAX232 variant?
Choose the MAX232CEASE+ when a +5 V, 2/2 RS-232 interface is required in a 16-SOIC footprint and the E-grade operating range suits the equipment. Alternatives in the same family can change the temperature grade, qualification, package width, or availability without changing the core two-driver, two-receiver RS-232 function. Review the exact suffix in the Analog Devices MAX232 ordering table, particularly for industrial temperature, automotive, or extended-temperature environments.
Is the MAX232CEASE+ suitable for industrial equipment?
The MAX232CEASE+ can be suitable for industrial RS-232 interfaces when its specified temperature grade covers the enclosure environment. The Analog Devices MAX232 data sheet, Rev. 18, distinguishes multiple ordering variants and package/qualification options. Confirm the exact E-grade limits, package drawing, and any system-level qualification requirements. Add external transient protection when the port connects to an unprotected cable or exposed field equipment.
Does the MAX232CEASE+ support two RS-232 ports?
The MAX232CEASE+ provides two drivers and two receivers, allowing two unidirectional links or one bidirectional RS-232 connection when the transmitter and receiver paths are paired correctly. A single full-duplex port generally uses one driver and one receiver, leaving the second pair available for another unidirectional channel. The Analog Devices MAX232 data sheet, Rev. 18, contains the definitive pin and truth-table information for each interface connection.
How should the MAX232CEASE+ be placed on a PCB?
Place the MAX232CEASE+ near the RS-232 connector and route its driver and receiver traces away from sensitive analog or high-speed digital paths. Keep the charge-pump capacitor connections short because their loop area affects switching noise and supply disturbance. Connect the ground reference carefully to the equipment ground, use a solid ground plane, and follow the Analog Devices MAX232 data sheet, Rev. 18, for exact capacitor placement and pin assignments.
Does the MAX232CEASE+ need external RS-232 protection?
The MAX232CEASE+ performs signal-level conversion but does not by itself guarantee complete cable-side surge and electrostatic-discharge protection. The Analog Devices MAX232 data sheet, Rev. 18, describes the transceiver function and application interface; protection requirements depend on cable length, exposure, grounding, and equipment standards. For exposed ports, evaluate suitable TVS protection and a defined chassis-to-signal-ground strategy using the protection-device and system design guidance.
Where can I buy MAX232CEASE+ and check the lead time?
Use the Request a Quote form on this XAIPART page to request MAX232CEASE+ availability, current commercial terms, and lead time for the requested quantity and package form. The Analog Devices product page identifies the part as a production device and lists an ordering table, but current channel availability can change independently of the component's lifecycle. Include your target quantity, date code requirements, and shipping destination in the request.
What is the price of MAX232CEASE+?
Current commercial terms for MAX232CEASE+ should be requested through the Request a Quote form on this XAIPART page. The official Analog Devices MAX232 product page identifies the MAX232 family as production and displays a list-price reference, but catalog pricing is not a quotation for the exact MAX232CEASE+ ordering code and required quantity. Submit your quantity, packaging, date-code, and delivery requirements for a current offer.
Is MAX232CEASE+ in stock?
Current stock status for MAX232CEASE+ should be confirmed through the Request a Quote form on this XAIPART page. The Analog Devices product listing identifies the MAX232 family as production, but component inventory can vary by package suffix, quantity, date code, and region. Provide the required quantity and date-code preference so the order can be matched to the correct MAX232CEASE+ configuration and delivery schedule.
What are the key specifications engineers should know about MAX232CEASE+?
The key MAX232CEASE+ specifications are its +5 V supply, 2/2 RS-232 configuration, two drivers, two receivers, and 16-pin SOIC package. The device supports EIA/TIA-232E and V.28/V.24 communications interfaces according to the Analog Devices MAX232 data sheet, Rev. 18. Its key implementation detail is the integrated charge-pump approach, which produces the required bipolar RS-232 driver levels from one 5 V rail.

エンジニアリング参考データ: MAX232CEASE+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX232CEASE+ when the design requires a 2/2 RS-232 transceiver in a 16-SOIC package and the E-grade ordering option is appropriate for the operating environment. Select MAX232CASE+ or MAX232ECSE+ when the lower C-grade operating class satisfies the equipment requirements. MAX232ACSE+ and MAX232ACWE+ can suit systems requiring the corresponding A-grade operating range, but their package and temperature attributes must be checked against the PCB and enclosure. MAX232EESE+ is the closest same-family option for a design already using that E-grade ordering variant. For systems needing more channels, lower logic supply voltage, automatic shutdown, or a different package, move to the MAX3232 or MAX202 families rather than forcing a MAX232 substitution. Every final replacement should be checked against the manufacturer ordering table, pin description, package drawing, temperature limits, and qualification requirements.

代替品との比較

パラメータ この製品 MAX232CASE+ MAX232ACSE+ MAX232ECSE+ MAX232EESE+ MAX232ACWE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Driver and Receiver Count 2/2 2/2 2/2 2/2 2/2 2/2
Interface Standard EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24
Ordering Grade E grade C grade A grade C grade E grade A grade

主な差別化要因

  • Two transmitters and two receivers in one 16-SOIC package (vs MAX202EEWE-T)
  • Single +5 V implementation (vs MAX232CASE+)
  • Supports bidirectional and split unidirectional RS-232 links (vs MAX202EEWE-T)

設計ノート

Place the MAX232CEASE+ close to the RS-232 connector and connect the charge-pump capacitors using short traces with a compact ground return. The manufacturer application circuit should be used as the layout reference because long capacitor loops can increase supply and radiated noise. Keep the transceiver and protected cable-side nodes away from precision analog inputs, switching regulators, and high-speed clock traces.

Do not treat the MAX232CEASE+ as a complete surge-protection solution. The transceiver converts logic levels to RS-232 but does not eliminate the need for suitable protection on exposed cable connections. Select protection with voltage, capacitance, and clamping characteristics compatible with the required data rate, and connect its return path to the correct signal or chassis-ground arrangement.

Confirm the package width and land pattern before substituting an ordering-code variant in the MAX232 family. The suffix controls ordering attributes such as temperature grade and SOIC width, so a shared 16-pin designation does not by itself guarantee identical PCB compatibility. Compare the manufacturer package drawing, minimum copper spacing, exposed connections, and assembly requirements before releasing a substitute to production.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance attributes require confirmation for the exact MAX232CEASE+ ordering code. The manufacturer product page identifies the MAX232 family as production; it does not by itself establish the target part's individual compliance status.

関連検索

MAX232CEASE+ datasheet MAX232CEASE+ datasheet pdf MAX232CEASE+ pinout MAX232CEASE+ equivalent MAX232CEASE+ replacement MAX232CEASE+ drop-in replacement MAX232CEASE+ cross reference MAX232CEASE+ vs MAX232CASE+ MAX232CEASE+ price MAX232CEASE+ stock Analog Devices MAX232CEASE+ MAX232CEASE+ 16-SOIC MAX232CEASE+ RS-232 application circuit

関連部品&用語

Analog Devices MAX232CEASE+ MAX232 MAX232CASE+ MAX232ACSE+ MAX232ECSE+ MAX232EESE+ MAX232ACWE+ MAX202EEWE-T RS-232 transceiver RS-232 interface UART interface IC semiconductor EIA/TIA-232E V.28 V.24 charge pump line driver line receiver 16-SOIC SOIC family surface mount industrial serial communication 5 V power supply
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示