Microchip Technology

MCP3304T-CI/SL - 13-Bit 4-Channel ADC | Microchip

N.º da peça: MCP3304T-CI/SL ✓ Ativo
4.5 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MCP3304T-CI/SL Visão geral

The Microchip Technology MCP3304T-CI/SL is a 13-bit successive-approximation analog-to-digital converter with four differential inputs, eight single-ended inputs, and an SPI serial interface. It operates from a 4.5 V to 5.5 V supply, supports conversion rates up to 100 kHz, and is packaged in a 16-pin SOIC.

An ADC converts an analog voltage into a numeric value for measurement, control, logging, or signal processing. The MCP3304 belongs to the ADC and DAC hierarchy within integrated circuits, combining a sample-and-hold input stage, successive-approximation conversion, and serial data output in one device. Its differential inputs are particularly useful when the measured signal requires rejection of common-mode voltage or rejection of noise referenced to an analog ground.

The device provides 13-bit resolution, four differential or eight single-ended input choices, and a 100 kHz maximum sampling capability. Its SPI interface supports communication with microcontrollers and other embedded processors. Low-power operation makes the converter suitable for battery-powered instrumentation, remote data acquisition, industrial control, and portable measurement systems where the complete system must balance conversion speed, energy use, and board area.

The MCP3304 architecture samples the selected input and performs successive-approximation conversion, producing one code for each conversion result. The digital result is transferred through the serial interface, reducing the number of signal connections compared with a parallel-output converter. The 16-pin SOIC provides a compact surface-mount footprint and is easier to inspect or service than a very fine-pitch package in low- to moderate-volume industrial equipment.

Typical uses include multichannel analog sensing, process monitoring, laboratory measurement, battery-powered data loggers, and embedded control systems. Differential sensing is appropriate when sensors produce a voltage centered around a biased common-mode level, while single-ended operation can simplify systems with multiple sensors referenced to ground. The 100 kHz conversion capability provides headroom for rapidly changing or multiplexed analog signals.

Design the analog front end around the input voltage range, source impedance, acquisition time, and reference stability. Keep analog traces short, use a low-noise reference arrangement, and place input and reference decoupling capacitors close to the device. Treat the SPI clock and digital signals as potential noise sources by keeping them away from sensitive input and reference nodes.

This page combines the manufacturer product information with package, application, replacement, and design guidance. It also distinguishes exact drop-in choices from functional alternatives that would require different pinouts, packages, or interface assumptions, helping engineers select a converter without changing the PCB unnecessarily.

Alternativas drop-in para MCP3304T-CI/SL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MCP3304T-CI/SL (mesmo formato e footprint) — diferindo em Input Configuration, Input Type, Package.

Microchip Technology
Input Configuration: 4 single-ended or 2 differential inputs
Input Type: Fully differential
Package: 16-pin SOIC, 3.90 mm width

MCP3304-BI/SL

✅ Drop-In
Microchip Technology
📦 16-SOIC
Successive-approximation ADC · 13 bit · 4 single-ended or 2 differential inputs · 4 channels · Fully differential · 100 ksps · 2.7 V minimum · SPI serial interface

Consulte o preço

Ver ficha técnica →

MCP3304T-AI/SL

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-SOIC
Uses the automotive A ordering grade instead of the C industrial grade; 13-bit resolution, 100 kHz conversion rate, supply range, and differential-channel count differ by 0%.

📋 Alternativa de referência (fora do catálogo)

MCP3304T-I/SL

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-SOIC
Uses the I ordering grade instead of the C grade; resolution remains 13 bit, conversion rate remains 100 kHz, and the published voltage and channel parameters differ by 0%.

📋 Alternativa de referência (fora do catálogo)

MCP3304T-CI/SL Classificações máximas e características elétricas

Resolução 13 bit
Input Configuration 4 differential inputs or 8 single-ended inputs
Conversion Architecture 1 successive-approximation converter
Maximum Conversion Rate 100 kHz
Supply Voltage Range 4.5 V to 5.5 V
Interface SPI serial interface
Input Type Differential and single-ended analog inputs
Encapsulamento 16-pin SOIC
Tipo de montagem Surface mount

Guia de Configuração de Pinos do MCP3304T-CI/SL 16-pin soic

Configuração de pinos para MCP3304T-CI/SL (pacote 16-pin soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-pin soic para MCP3304T-CI/SL

Nenhum dado detalhado de pinagem disponível para MCP3304T-CI/SL.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MCP3304T-CI/SL é adequado para 6 aplicaçãos: Industrial Process Monitoring, Battery-Powered Remote Data Acquisition, Laboratory Measurement Equipment, Precision Current and Voltage Sensing, Embedded Environmental Sensing, Automotive and Mobile Analog Sensing.

🏭

Industrial Process Monitoring

The MCP3304T-CI/SL fits industrial process monitoring because it combines four differential inputs with 13-bit resolution and a 100 kHz maximum conversion rate. Multiple sensors can share the converter through its eight single-ended inputs, while differential channels suit bridge outputs and shunts that carry a common-mode voltage. The SPI interface transfers results to a controller such as an MSP430-family microcontroller. Design the front end so sensor outputs remain inside the converter input range, and keep the analog reference and input traces away from SPI clock signals.

🔋

Battery-Powered Remote Data Acquisition

The MCP3304T-CI/SL is appropriate for battery-powered remote data acquisition because the Microchip MCP3304 family emphasizes low-power operation, compactness, and an industry-standard SPI interface. Four differential inputs can monitor low-level sensor outputs while their common-mode reference helps reject noise coupled equally to both wires. At a 100 kHz maximum rate, the device can sample several channels sequentially when the application requires faster updates. Battery life depends on how often the MCU wakes, the number of conversions performed, sensor loading, and reference-circuit consumption, so include those loads in the system budget.

🔧

Laboratory Measurement Equipment

The MCP3304T-CI/SL can serve as the measurement front end in laboratory instrumentation that needs more than a coarse sensor reading but not a high-speed waveform converter. Four differential channels allow several precision sensors to share a common measurement system, while the 13-bit result provides 8192 possible digital code levels across the selected analog range. The SPI output is practical for a microcontroller or embedded controller, and the 16-pin SOIC remains inspectable on laboratory-oriented boards. Accuracy ultimately depends on reference stability, front-end noise, grounding, calibration, and the selected input range rather than resolution alone.

⚡

Precision Current and Voltage Sensing

The MCP3304T-CI/SL is well suited to precision shunt and sensor measurements because its four differential inputs measure a voltage across two nodes rather than referencing every sensor directly to ground. A shunt amplifier can produce a small differential voltage proportional to current, while the ADC reports a 13-bit digital code. The four-channel configuration supports simultaneous measurement of several loads or rails without sharing an input node. Keep high-current paths separated from sensitive analog traces, use Kelvin routing where appropriate, and verify the differential input limits and reference voltage in the manufacturer datasheet.

🧩

Embedded Environmental Sensing

The MCP3304T-CI/SL supports embedded environmental sensing systems that combine temperature, pressure, humidity, or gas sensors with low-level analog outputs. Its eight single-ended inputs can serve several ground-referenced sensors, while four differential inputs support sensors that operate around a biased common-mode voltage. The 13-bit resolution and 100 kHz conversion capability cover many slow environmental measurements while leaving bandwidth for periodic sampling. A microcontroller can configure channels over SPI and apply calibration, offset correction, and filtering. Place sensor grounds and converter references using a quiet analog return path to prevent digital switching noise from influencing low-level readings.

🚗

Automotive and Mobile Analog Sensing

The MCP3304T-CI/SL architecture can support mobile analog-sensing subsystems where several low-voltage sensor channels must be digitized through a compact serial interface. Four differential inputs reduce sensitivity to common-mode disturbances when sensors are referenced to a biased return path, and the 16-pin SOIC supports straightforward surface-mount assembly. The SPI link allows an embedded controller to sample, filter, and transmit measurements. For automotive production, select the ordering grade whose qualification and temperature requirements match the vehicle environment; the automotive ordering variant should be reviewed when AEC-Q100 evidence is required.

What is the MCP3304T-CI/SL?
The MCP3304T-CI/SL is a 13-bit, four-channel differential-input ADC with an SPI interface and a 100 kHz maximum conversion rate. According to the Microchip MCP3304 product page, the converter supports four differential inputs or eight single-ended inputs, operates from 4.5 V to 5.5 V, and uses a 16-pin SOIC package. It is intended for precision measurement, data acquisition, and low-power embedded systems.
How many ADC channels does the MCP3304T-CI/SL have?
The MCP3304T-CI/SL provides four differential analog inputs or eight single-ended analog inputs. According to the Microchip MCP3304 product information, a single successive-approximation conversion engine serves the selected channels. Differential operation measures the voltage between two input pins, while single-ended operation measures each input relative to the analog reference or ground configuration defined by the device.
What resolution and sampling rate does the MCP3304T-CI/SL provide?
The MCP3304T-CI/SL provides 13-bit resolution and a maximum conversion rate of 100 kHz. According to the Microchip MCP3304 product page, these specifications suit multichannel data-acquisition systems that need more precision than a low-resolution sensor interface without requiring a high-speed flash converter. The selected channel must be configured, sampled, converted, and transferred through the SPI interface.
What is the supply voltage of the MCP3304T-CI/SL?
The MCP3304T-CI/SL operates from 4.5 V to 5.5 V. According to the Microchip MCP3304 product information, the device uses a 5 V-compatible supply range and an SPI digital interface. Place suitable supply decoupling close to the device, and confirm the analog reference voltage, input range, and digital interface levels against the manufacturer datasheet before completing the board design.
Where can I download the MCP3304T-CI/SL datasheet PDF?
Download the MCP3304T-CI/SL documentation from the official Microchip MCP3304 product page, where the manufacturer provides the product datasheet and supporting documents. The device is a 13-bit SAR ADC with four differential inputs, eight single-ended inputs, a 100 kHz conversion rate, and a 16-pin SOIC package. Use the pin-description table and electrical-characteristics section in that document for final schematic and layout decisions.
Where is the MCP3304T-CI/SL pinout located?
The MCP3304T-CI/SL pinout is located in the pin-description table of the manufacturer datasheet on the official Microchip MCP3304 product page. The package is a 16-pin SOIC, so PCB designers must assign all 16 pins according to that table, including power, ground, analog input, reference, and SPI signals. Use the manufacturer pin-description table rather than inferring connections from another ADC in the same family.
Is the MCP3304T-CI/SL suitable for battery-powered data acquisition?
The MCP3304T-CI/SL is suitable for battery-powered data acquisition because the Microchip MCP3304 family is designed for low-power operation and a compact package. Its 13-bit resolution, 100 kHz maximum conversion rate, and SPI interface fit portable measurement systems. Battery life also depends on MCU sleep behavior, sampling frequency, reference circuitry, and sensor load, so evaluate the complete power budget rather than the ADC alone.
Can the MCP3304T-CI/SL measure differential sensor signals?
Yes, the MCP3304T-CI/SL supports four differential inputs in addition to eight single-ended inputs. According to the Microchip MCP3304 product information, differential measurement compares two analog nodes and can reduce sensitivity to common-mode voltage. It is well suited to bridge sensors, current-shunt measurements, and other signals centered away from ground, provided the common-mode and input-range limits remain within the datasheet limits.
MCP3304T-CI/SL vs MCP3304-BI/SL - which should I choose?
Choose the MCP3304T-CI/SL when the required industrial temperature grade, reel presentation, and exact ordering code must be preserved; both devices are identified as 13-bit MCP3304-family converters in 16-pin SOIC packages. The verified comparison identifies the same MCP3304 series and SOIC-16 package, but the ordering-grade codes differ. Confirm the exact temperature, reel, and electrical requirements before treating either ordering code as interchangeable.
What is the difference between the MCP3304T-CI/SL and MCP3304T-AI/SL?
The MCP3304T-CI/SL and MCP3304T-AI/SL share the MCP3304 converter family and 16-pin SOIC interface, but their ordering-grade codes indicate different qualification classes. The MCP3304T-AI/SL is the automotive-grade form, while the MCP3304T-CI/SL is the C industrial form. Both retain 13-bit resolution, a 100 kHz conversion rate, and the same key voltage and interface parameters, subject to final datasheet verification.
When should I choose the MCP3304T-CI/SL over another 13-bit ADC?
Choose the MCP3304T-CI/SL when the design needs four differential inputs, eight single-ended inputs, a 13-bit result, SPI communication, and a 16-pin SOIC footprint. It is particularly useful for low-power remote sensing and industrial acquisition. Select another ADC when higher speed, more channels, a different reference arrangement, smaller package size, or a parallel interface is required; a functional alternative is not automatically a PCB drop-in replacement.
Is the MCP3304T-CI/SL suitable for industrial sensor acquisition?
The MCP3304T-CI/SL is suitable for many industrial sensor-acquisition systems because it offers 13-bit resolution, four differential inputs, eight single-ended inputs, and operation from 4.5 V to 5.5 V. Its SPI interface simplifies connection to an embedded controller. Verify the exact operating-temperature limits, analog input range, reference accuracy, noise performance, and isolation requirements in the manufacturer datasheet before deployment.
What can replace the MCP3304T-CI/SL?
A true drop-in replacement for the MCP3304T-CI/SL must use the same 16-pin SOIC footprint, preserve pin-to-pin connectivity, match the SPI behavior, and remain within the key voltage, resolution, and conversion-rate limits. The verified family references identify MCP3304 ordering variants, but no independently verified cross-brand, pin-compatible substitute was established. Request a replacement cross-reference for the exact PCB and qualification requirements before changing the BOM.
What is the best Microchip equivalent for the MCP3304T-CI/SL?
The closest verified Microchip equivalents are MCP3304 ordering variants in the same 16-pin SOIC family, including MCP3304-BI/SL, MCP3304T-AI/SL, and MCP3304T-I/SL. Their qualification and ordering codes differ, while the principal 13-bit, four-channel, SPI architecture remains. Treat the exact grade, temperature range, reel format, reference characteristics, and automotive requirements as selection constraints rather than assuming unconditional interchangeability.
What are the key specifications of MCP3304T-CI/SL that engineers should know?
The key MCP3304T-CI/SL specifications are 13-bit resolution, four differential or eight single-ended inputs, a 100 kHz maximum conversion rate, a 4.5 V to 5.5 V supply range, and an SPI interface. According to the Microchip MCP3304 product page, the converter also uses a single successive-approximation conversion engine and a compact 16-pin SOIC package. These parameters define its suitability for multichannel embedded measurement systems.

Dados de referência de engenharia para MCP3304T-CI/SL — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MCP3304T-CI/SL for compact multichannel measurement systems that require 13-bit resolution, four differential inputs or eight single-ended inputs, a 100 kHz maximum conversion rate, and SPI communication. It is particularly appropriate for industrial acquisition, remote sensing, and embedded measurement designs using a 16-pin SOIC footprint. Consider MCP3304T-AI/SL when the automotive qualification class is required, and compare MCP3304-BI/SL or MCP3304T-I/SL when their respective ordering grades better match the environmental requirements. None of these variants changes the core 13-bit, four-channel SAR architecture, so the final choice should focus on qualification, temperature grade, and exact ordering-code compliance. Do not select a generic 13-bit ADC as a drop-in replacement unless its complete pinout, SPI timing, reference circuit, input range, and acquisition characteristics have been verified against the existing PCB.

Comparação com alternativas

Parâmetro Este produto MCP3304-BI/SL MCP3304T-AI/SL MCP3304T-I/SL
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Resolution 13 bit 13 bit 13 bit 13 bit
Input Configuration 4 differential inputs or 8 single-ended inputs 4 differential inputs or 8 single-ended inputs 4 differential inputs or 8 single-ended inputs 4 differential inputs or 8 single-ended inputs
Conversion Architecture 1 SAR converter 1 SAR converter 1 SAR converter 1 SAR converter
Maximum Conversion Rate 100 kHz 100 kHz 100 kHz 100 kHz
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Interface SPI SPI SPI SPI
Ordering Grade C industrial grade B grade A automotive grade I grade
Special Features Differential and single-ended input operation Differential and single-ended input operation Differential and single-ended input operation Differential and single-ended input operation

Principais diferenciais

  • Maintains the established MCP3304 conversion and interface performance (vs MCP3304-BI/SL)
  • Offers an automotive-qualified family option without changing the electrical architecture (vs MCP3304T-AI/SL)
  • Combines multiple analog inputs with a compact serial interface (vs MCP3304T-I/SL)

Notas de projeto

Place input, reference, and supply decoupling components directly beside their associated pins. Keep analog input traces short and continuous, avoid routing them beneath digital clocks, and use a quiet analog ground strategy. For differential measurements, route the positive and negative signals as a closely matched pair to minimize conversion of external noise into a differential error.

Treat the SPI clock as the principal digital switching source. Keep clock routing away from analog inputs and the reference node, provide a continuous return path, and avoid sharing narrow neck points between analog and digital return currents. If the sensor source impedance is high, compare its charging requirement with the converter acquisition time and add a suitable charge-injection or buffer circuit instead of assuming the sample-and-hold capacitor will settle fully.

The MCP3304T-CI/SL operates from 4.5 V to 5.5 V, so the 5 V rail must remain within that range during transients. Use local bulk and high-frequency bypass capacitance, and provide clean return-current paths from the supply pins. The reference voltage directly scales the measurable input range and conversion accuracy, so isolate it from digital loading and evaluate its noise, startup behavior, and temperature drift rather than treating it as a fixed ideal source.

Do not substitute an ADC solely because it also has a 13-bit rating and an SPI interface. A genuine PCB replacement must preserve the 16-pin SOIC pinout, SPI mode and timing, input ranges, reference arrangement, and conversion behavior. Also verify that the replacement ordering grade provides the required operating temperature and qualification. A different package or pin map is a redesign, not a drop-in substitution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements appear in the manufacturer page excerpts. The automotive ordering variant may address vehicle-grade requirements, but qualification status must be confirmed from the relevant manufacturer documentation.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MCP3304T-CI/SL datasheet MCP3304T-CI/SL pinout MCP3304T-CI/SL datasheet pdf MCP3304T-CI/SL equivalent MCP3304T-CI/SL replacement MCP3304T-CI/SL cross reference MCP3304T-CI/SL price MCP3304T-CI/SL stock Microchip MCP3304T-CI/SL MCP3304T-CI/SL 13-bit ADC MCP3304T-CI/SL SOIC-16 MCP3304T-CI/SL SPI interface MCP3304T-CI/SL vs MCP3304-BI/SL MCP3304T-CI/SL application circuit

Componentes & termos relacionados

Microchip Technology MCP3304T-CI/SL MCP3304-BI/SL MCP3304T-AI/SL MCP3304T-I/SL ADC analog-to-digital converter DAC successive-approximation ADC SAR converter SPI serial peripheral interface 13-bit resolution differential input single-ended input sample-and-hold SOIC-16 surface-mount package analog-to-digital conversion industrial process monitoring battery-powered data acquisition remote data acquisition sensor acquisition MSP430 precision measurement
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ