PIC18F65K90-E/MR - 8-bit 32KB Flash MCU w/ LCD | Microchip
N.º da peça: PIC18F65K90-E/MR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.2 | $7,20 |
| 10 | $6.48 | $64,80 |
| 100 | $5.76 | $576,00 |
| 500 | $5.18 | $2.590,00 |
| 1.000 | $4.6 | $4.600,00 |
PIC18F65K90-E/MR Visão geral
An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die. PIC18F microcontrollers use Microchip's enhanced RISC architecture, sitting in the hierarchy: 8-bit MCU -> PIC18F family -> microcontroller -> embedded processor -> semiconductor. The 'K' suffix designates the nanoWatt XLP ultra-low-power family, and the integrated LCD driver makes this part a natural fit for battery-powered human-machine interface designs.
Key features include 24 channels of 12-bit ADC, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, an LCD driver supporting up to 384 segments, nanoWatt XLP sleep currents below 1 uA, and 54 digital I/O pins. Communication peripherals include two EUSART, two SPI, and one I2C. The E/MR suffix indicates an automotive-grade (-40C to +125C) part in a VQFN-64 package supplied in tube.
The PIC18F65K90 architecture combines a 16-bit instruction word with 8-bit data path, allowing single-cycle 8x8 hardware multiply and C-friendly compiler support from MPLAB XC8. The CTMU enables robust capacitive touch buttons, sliders, and proximity sensors with minimal external components.
Typical applications include battery-powered LCD keypads, automotive instrument clusters, portable medical monitors, e-meter displays, and white goods with touch interfaces. Designers choose the PIC18F65K90 when they need LCD glass drive plus touch sensing plus AEC-Q100 qualification in a compact QFN footprint.
When designing with this part, ensure that the exposed pad is soldered to a sufficient ground plane for thermal dissipation, and use MPLAB X IDE with the XC8 compiler for development. The internal 16 MHz oscillator and PLL allow external crystal-free operation, reducing BOM cost in cost-sensitive applications.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the bare manufacturer datasheet.
Alternativas drop-in para PIC18F65K90-E/MR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F65K90-E/MR (mesmo formato e footprint) — diferindo em Package, ADC, Core Architecture, Timers, Program Memory (Flash).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F65K90-I/MR
✅ Drop-In✓ Em estoque
$3.02 / unidade
Ver ficha técnica →PIC18F66K90-E/MR
✅ Drop-In✓ Em estoque
$4.75 / unidade
Ver ficha técnica →PIC18F67K90-E/MR
✅ Drop-In✓ Em estoque
$4.31 / unidade
Ver ficha técnica →PIC18F65K90T-E/MR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F65K22-E/MR
✅ Drop-In✓ Em estoque
$3.5 / unidade
Ver ficha técnica →PIC18F65K22-I/PT
✅ Drop-In✓ Em estoque
$3.45 / unidade
Ver ficha técnica →PIC18F65K80T-I/PT
✅ Drop-In✓ Em estoque
$3.33 / unidade
Ver ficha técnica →PIC18F65K40-I/PT
✅ Drop-In✓ Em estoque
$1.95 / unidade
Ver ficha técnica →PIC18F65K90-E/MR Classificações máximas e características elétricas
| Product Family | PIC18F87K90 |
| Core | 8-bit PIC RISC |
| Program Memory (Flash) | 32 KB |
| Data SRAM | 2 KB |
| EEPROM | 1 KB |
| Maximum Clock Speed | 64 MHz (40 MHz E/MR grade) |
| Tensão de alimentação | 1.8 V to 5.5 V (4.2 V to 5.5 V at full speed) |
| I/O Pins | 54 |
| ADC | 12-bit, up to 24 channels |
| LCD Driver | Up to 384 segments |
| CTMU Channels | 24 |
| EUSART | 2 |
| SPI | 2 |
| I2C | 1 (MSSP) |
| Timers | 11 (3x16-bit, 8x8-bit) |
| Temperatura de operação | -40C to +125C (automotive E grade) |
| Encapsulamento | 64-pin VQFN (9x9 mm) with EP |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| AEC-Q100 | Qualified |
Configuração de pinos do PIC18F65K90-E/MR
| Pino 1 | RB7 — General purpose I/O / PGC |
| Pino 2 | RB6 — General purpose I/O / PGD |
| Pino 3 | RB5 — General purpose I/O |
| Pino 4 | RB4 — General purpose I/O |
| Pino 5 | RB3 — General purpose I/O |
| Pino 6 | RB2 — General purpose I/O |
| Pino 7 | RB1 — General purpose I/O |
| Pino 8 | RB0 — General purpose I/O |
| Pino 9 | VSS — Ground reference |
| Pino 10 | VDD — Positive supply voltage |
| Pino 11 | RC7 — General purpose I/O / RX1 |
| Pino 12 | RC6 — General purpose I/O / TX1 |
| Pino 13 | RC5 — General purpose I/O |
| Pino 14 | RC4 — General purpose I/O |
| Pino 15 | RC3 — General purpose I/O / SCL1 |
| Pino 16 | RC2 — General purpose I/O |
| Pino 17 | RC1 — General purpose I/O |
| Pino 18 | RC0 — General purpose I/O |
| Pino 19 | RD7 — General purpose I/O |
| Pino 20 | RD6 — General purpose I/O |
| Pino 21 | RD5 — General purpose I/O |
| Pino 22 | RD4 — General purpose I/O |
| Pino 23 | RD3 — General purpose I/O |
| Pino 24 | RD2 — General purpose I/O |
| Pino 25 | RD1 — General purpose I/O |
| Pino 26 | RD0 — General purpose I/O |
| Pino 27 | RE7 — General purpose I/O |
| Pino 28 | RE6 — General purpose I/O |
| Pino 29 | RE5 — General purpose I/O |
| Pino 30 | RE4 — General purpose I/O |
| Pino 31 | RE3 — General purpose I/O |
| Pino 32 | RE2 — General purpose I/O |
| Pino 33 | RE1 — General purpose I/O |
| Pino 34 | RE0 — General purpose I/O |
| Pino 35 | VSS — Ground reference |
| Pino 36 | VDD — Positive supply voltage |
| Pino 37 | RF7 — General purpose I/O |
| Pino 38 | RF6 — General purpose I/O |
| Pino 39 | RF5 — General purpose I/O |
| Pino 40 | RF4 — General purpose I/O |
| Pino 41 | RF3 — General purpose I/O |
| Pino 42 | RF2 — General purpose I/O |
| Pino 43 | RF1 — General purpose I/O |
| Pino 44 | RF0 — General purpose I/O |
| Pino 45 | RG7 — General purpose I/O |
| Pino 46 | RG6 — General purpose I/O |
| Pino 47 | RG5 — General purpose I/O |
| Pino 48 | RG4 — General purpose I/O |
| Pino 49 | RG3 — General purpose I/O |
| Pino 50 | RG2 — General purpose I/O |
| Pino 51 | RG1 — General purpose I/O / C1RX |
| Pino 52 | RG0 — General purpose I/O / C1TX |
| Pino 53 | VSS — Ground reference |
| Pino 54 | VDD — Positive supply voltage |
| Pino 55 | RA7 — General purpose I/O / OSC1 |
| Pino 56 | RA6 — General purpose I/O / OSC2 |
| Pino 57 | RA5 — General purpose I/O |
| Pino 58 | RA4 — General purpose I/O |
| Pino 59 | RA3 — General purpose I/O |
| Pino 60 | RA2 — General purpose I/O |
| Pino 61 | RA1 — General purpose I/O |
| Pino 62 | RA0 — General purpose I/O |
| Pino 63 | VSS — Ground reference |
| Pino 64 | VDD — Positive supply voltage |
Aplicações típicas
PIC18F65K90-E/MR é adequado para 7 aplicaçãos: Battery-Powered LCD Keypad with CTMU Touch, Automotive Instrument Cluster, Portable Medical Monitor, Industrial E-Meter / Energy Display, White Goods with Touch Interface, IoT Sensor Hub with Local Display, HVAC Control Panel.
Battery-Powered LCD Keypad with CTMU Touch
The PIC18F65K90-E/MR's integrated 384-segment LCD controller and 24-channel CTMU capacitive touch engine make it ideal for battery-powered LCD keypads requiring touch buttons and sliders. With nanoWatt XLP sleep currents under 1 uA and 1.8V operation, the MCU can run a multi-segment LCD with touch for years on two AA cells. Placed on a small PCB with a glass LCD and copper touch pads, the part handles backlight control via PWM, drives up to 8 commons, and scans touch via the CTMU without an external touch IC. The trade-off vs a dedicated touch controller is tighter touch sensing noise margins in noisy environments.
Recomendado
Automotive Instrument Cluster
The PIC18F65K90-E/MR's AEC-Q100 qualification, -40C to +125C operating range, and integrated LCD segment driver suit it for automotive instrument clusters, gauge displays, and HVAC control panels. With 54 I/O pins it can drive analog sensor inputs through the 24-channel 12-bit ADC and switch on relay/motor drivers via PWM. The CAN-friendly EUSART peripherals and CTMU touch handle infotainment keypads and proximity-sensing door handles. The trade-off vs 32-bit automotive MCUs is lower computational throughput for graphics.
Recomendado
Portable Medical Monitor
The PIC18F65K90-E/MR's nanoWatt XLP technology and integrated LCD segment driver fit portable medical devices such as glucose meters, pulse oximeters, and digital thermometers. The CTMU enables reliable capacitive touch on glass-front panels for medical-grade cleaning, and the 12-bit ADC reads sensor front-ends with sufficient resolution for vital-sign measurements. Its 1.8V to 5.5V supply range and <1 uA sleep current enable battery life exceeding 1 year on coin cells in spot-check designs.
Recomendado
Industrial E-Meter / Energy Display
The PIC18F65K90-E/MR drives LCD-segment displays for single-phase and three-phase electricity meters, water meters, and gas meters. Its 12-bit ADC at 24 channels digitizes current/voltage transducers accurately enough for revenue-grade metering when paired with proper anti-aliasing. nanoWatt XLP allows the meter to run its display and CTMU-based tamper switch while consuming under 5 uA average, satisfying IEC 62053-21 static-meter power budgets. The trade-off vs 32-bit metering MCUs is limited on-chip cryptography support.
Recomendado
White Goods with Touch Interface
The PIC18F65K90-E/MR's CTMU capacitive touch and LCD segment driver fit white-goods front panels such as washing machines, dishwashers, refrigerators, and microwave ovens. With up to 24 touch channels it can replace dozens of mechanical buttons with capacitive sliders, while the LCD shows cycles, temperature, and remaining time. Its -40C to +125C automotive grade survives the kitchen thermal environment, and the 64-pin VQFN with exposed pad provides robust thermal performance.
Recomendado
IoT Sensor Hub with Local Display
The PIC18F65K90-E/MR serves as a local-display IoT sensor hub in industrial IoT nodes, building-automation thermostats, and smart-meter gateways. Its LCD segment driver shows local status without network connectivity, while the EUSART/SPI/I2C peripherals talk to wireless modules for cloud uplink. The 24-channel ADC reads multiple analog sensors, and the CTMU enables capacitive user controls. The trade-off vs Cortex-M IoT MCUs is higher active power consumption per MHz.
Recomendado
HVAC Control Panel
The PIC18F65K90-E/MR drives HVAC control panels in residential and commercial buildings, combining LCD-segment display of setpoint/temperature with capacitive touch sliders for user input. Its 24-channel ADC reads multiple temperature/humidity sensors, while PWM outputs control fans, valves, and compressor stages. nanoWatt XLP allows the panel to retain display and run touch scanning during low-power standby, reducing wall-thermostat idle consumption below 100 uA.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F65K90-E/MR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F65K90-I/MR | PIC18F66K90-E/MR | PIC18F67K90-E/MR | PIC18F65K22-E/MR | PIC18F65K22-I/PT | PIC18F65K80T-I/PT | PIC18F65K40-I/PT |
|---|---|---|---|---|---|---|---|---|
| Package | VQFN-64 (9x9 mm) | VQFN-64 (9x9 mm) - same | VQFN-64 (9x9 mm) - same | VQFN-64 (9x9 mm) - same | VQFN-64 - same | TQFP-64 - different | TQFP-64 - different | TQFP-64 - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 64 KB (+100%) | 128 KB (+300%) | 64 KB (+100%) | 64 KB (+100%) | 32 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 4 KB (+100%) | 4 KB (+100%) | 4 KB (+100%) | 4 KB (+100%) | 16 KB (+700%) | 2 KB |
| LCD Driver | Yes (up to 384 segments) | Yes | Yes | Yes | No | No | No | No |
| CTMU (Capacitive Touch) | Yes (24 channels) | Yes | Yes | Yes | No | No | No | No |
| Temperature Grade | Automotive -40C to +125C | Industrial -40C to +85C | Automotive -40C to +125C | Automotive -40C to +125C | Automotive -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| AEC-Q100 Qualified | Yes | No | Yes | Yes | Yes | No | No | No |
Principais diferenciais
- Integrated LCD driver with up to 384 segments (vs PIC18F65K22-E/MR)
- Integrated CTMU for 24-channel capacitive touch (vs PIC18F65K22-E/MR)
- AEC-Q100 automotive qualification (vs PIC18F65K90-I/MR)
- Drop-in upgrade path with more Flash (vs PIC18F66K90-E/MR)
Notas de projeto
The 64-pin VQFN package has an exposed thermal pad on the bottom that must be soldered to a ground copper pour of at least 25 mm squared for electrical grounding and thermal dissipation. Missing or insufficient pad solder voids will cause 5-10C junction temperature rise and potential reliability failures. Use 0.5 mm via array in the pad to stitch ground to inner layers, and follow IPC-7351 land pattern guidelines for VQFN-64 (9x9 mm).
Decouple each VDD pin (10, 36, 54, 64) with a 100 nF ceramic capacitor placed within 5 mm of the pin, and add a single 10 uF bulk capacitor near the IC. For battery-powered designs using nanoWatt XLP sleep modes, place the bulk capacitor so its return path shares the same ground via cluster as the IC to minimize leakage during deep sleep. Per Microchip PIC18F87K90 family datasheet, VDD rise time should remain below 0.05 V/us to avoid power-on-reset issues.
Do not enable the LCD controller before initializing the segment and common pins as digital outputs where needed; otherwise ghost segments appear. Configure CTMU current source trim per datasheet section 23 before relying on touch readings, or touch sensitivity drifts with temperature. When migrating code from PIC18F45K22 to PIC18F65K90, remember the K90 adds LCD and CTMU peripheral initializations that the K22 lacks - leaving these registers at defaults causes higher sleep current than expected.
Keep the 32.768 kHz crystal (T1OSO/T1OSI pins) traces short and symmetric, surrounded by a grounded guard ring if possible, to minimize RTC drift. Route analog ADC inputs (AN0-AN23) away from PWM and switching traces to avoid coupling; place a 100 nF bypass at each analog input pin when driving high-impedance sensors. Microchip AN1416 recommends keeping analog traces at least 3 mm from digital switching signals.
Informações de conformidade
AEC-Q100 qualified per Microchip ordering information. RoHS/REACH compliance per Microchip product page DS39990 family datasheet, last verified 2026-09-28.
