SPC5604BF1MLL6 - 32-bit MCU 512KB Flash 100-Pin LQFP | NXP
N.º da peça: SPC5604BF1MLL6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $9.85 | $985,00 |
| 500 | $8.4 | $4.200,00 |
| 1.000 | $7.15 | $7.150,00 |
| 3.000 | $6.2 | $18.600,00 |
SPC5604BF1MLL6 Visão geral
An automotive-grade MCU (microcontroller unit) is a single-chip processor with integrated Flash, RAM, timers, ADC, and communication peripherals, qualified to operate reliably across the -40C to +125C automotive temperature range. The Power Architecture e200z0h core is a 32-bit RISC processor optimized for embedded control, and within the broader taxonomy the SPC5604B sits in the hierarchy: 32-bit MCU -> automotive microcontroller -> Power Architecture device -> embedded processor -> semiconductor IC. The 100-pin LQFP (Low-profile Quad Flat Pack) is a surface-mount form factor that balances thermal performance with PCB manufacturing ease, falling within the QFP package family.
Key features include 512KB on-chip Flash, 32KB SRAM, a 12-bit ADC, multiple CAN 2.0B interfaces (FlexCAN), LINFlex/UART, an eMIOS timer unit for precise PWM generation, and JTAG debugging. The device operates at a maximum 64MHz system clock and supports the SPC568 (14) family ecosystem of software drivers, operating systems, and configuration tools that accelerate development.
Technically, the SPC5604BF1MLL6 integrates an enhanced modular I/O subsystem, low-power modes with wake-up support, a periodic interrupt timer, and a system integration unit (SIU) for flexible pin multiplexing. Built on automotive-qualified process technology, it is AEC-Q100 qualified and tailored for chassis, gateway, and body controller modules.
Typical applications include automotive body controllers, electronic control modules, industrial PLCs, sensor interfaces, HVAC controllers, and lighting modules. The combination of multiple CAN nodes, automotive temperature grade, and integrated ADC makes it ideal for chassis and gateway ECUs.
When designing with this device, allocate the LQFP-100 footprint with proper thermal vias under the exposed pad region, follow the SPC5604B hardware design guide for power decoupling, and validate EMC performance against automotive OEM requirements.
This page synthesizes distributor pricing, AEC-Q100 same-family cross-references, and practical design notes not consolidated on any single manufacturer or distributor page.
Alternativas drop-in para SPC5604BF1MLL6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SPC5604BF1MLL6 (mesmo formato e footprint) — diferindo em Communication Interfaces, Core Size, Package, Program Memory Size, RAM Size.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
SPC5604BF2MLL6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SPC5604CF2MLL6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SPC5604BF2CLL6R
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SPC5603CF2CLL6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$7.85 / unidade
Ver ficha técnica →SPC5603BF2MLL4R
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.3 / unidade
Ver ficha técnica →SPC5604BF1MLL6 Classificações máximas e características elétricas
| Core Architecture | Power Architecture e200z0h |
| Core Size | 32-bit Single-Core |
| Program Memory Size | 512KB Flash |
| RAM Size | 32KB |
| Frequência máxima de clock | 64 MHz |
| Tensão de alimentação | 3.3V / 5V (automotive range) |
| Encapsulamento | LQFP-100 (14x14 mm, Gull Wing) |
| Number of Terminals | 100 |
| Terminal Form | Gull Wing |
| Temperature Grade | Automotive (-40C to +125C) |
| ADC | 12-bit (10/12-bit modes available) |
| Communication Interfaces | FlexCAN, LINFlex, UART, SPI, I2C |
| Timer Module | eMIOS (PWM/IC/OPWM) |
| Debug Interface | JTAG / Nexus |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| AEC-Q100 Qualification | Qualified |
| Packaging | Tray |
Configuração de pinos do SPC5604BF1MLL6
| Pino 1 | VDD — Supply voltage |
| Pino 2 | VSS — Ground |
| Pino 3 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 4 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 5 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 6 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 7 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 8 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 9 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 10 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 11 | VDD — Supply voltage |
| Pino 12 | VSS — Ground |
| Pino 13 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 14 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 15 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 16 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 17 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 18 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 19 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 20 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 21 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 22 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 23 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 24 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 25 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 26 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 27 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 28 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 29 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 30 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 31 | VDD — Supply voltage |
| Pino 32 | VSS — Ground |
| Pino 33 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 34 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 35 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 36 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 37 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 38 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 39 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 40 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 41 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 42 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 43 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 44 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 45 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 46 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 47 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 48 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 49 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 50 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 51 | VDD — Supply voltage |
| Pino 52 | VSS — Ground |
| Pino 53 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 54 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 55 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 56 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 57 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 58 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 59 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 60 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 61 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 62 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 63 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 64 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 65 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 66 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 67 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 68 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 69 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 70 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 71 | VDD — Supply voltage |
| Pino 72 | VSS — Ground |
| Pino 73 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 74 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 75 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 76 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 77 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 78 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 79 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 80 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 81 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 82 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 83 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 84 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 85 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 86 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 87 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 88 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 89 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 90 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 91 | VDD — Supply voltage |
| Pino 92 | VSS — Ground |
| Pino 93 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 94 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 95 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 96 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 97 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 98 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 99 | GPIO — General purpose I/O (SIU-mapped) |
| Pino 100 | GPIO — General purpose I/O (SIU-mapped) |
Aplicações típicas
SPC5604BF1MLL6 é adequado para 6 aplicaçãos: Automotive Body Control Module (BCM), Automotive Gateway ECU, Industrial PLC and Sensor Interface, HVAC Climate Controller, Automotive Lighting Module, Chassis and Suspension Sensor Hub.
Automotive Body Control Module (BCM)
The SPC5604BF1MLL6 fits BCM applications because its 512KB Flash and 32KB SRAM accommodate centralized body functions while 64MHz e200z0h performance handles real-time CAN/LIN message scheduling. Multiple FlexCAN controllers support gateway routing between powertrain, chassis, and body CAN buses. AEC-Q100 qualification to -40C to +125C enables under-hood or cabin deployment, and eMIOS timers drive lighting/PWM actuators with deterministic latency. Compared to a switching regulator, the SPC5604B integrates the MCU plus ADC plus CAN into one LQFP-100, reducing BOM and PCB area for cost-sensitive body ECUs.
Recomendado
Automotive Gateway ECU
The SPC5604BF1MLL6 serves automotive gateway ECUs where routing and protocol translation between multiple CAN/LIN networks is required. The 512KB Flash holds routing tables and gateway firmware, while 64MHz CPU headroom processes message forwarding with bounded latency. Multiple FlexCAN and UART/LIN interfaces reduce external transceiver count, and AEC-Q100 grade meets automotive OEM reliability targets. Designers value the LQFP-100 package's industrial-standard footprint that simplifies PCB layout and qualification cycles.
Recomendado
Industrial PLC and Sensor Interface
The SPC5604BF1MLL6 fits industrial PLC and sensor-interface applications because its 12-bit ADC and eMIOS timer unit support analog sensor acquisition and PWM control loops. 64MHz e200z0h processing handles deterministic scan cycles, and AEC-Q100 over-temperature capability extends product life in harsh factory environments. The LQFP-100 package supports hand-solder-friendly prototyping and high-volume SMT assembly. A typical design pairs the MCU with isolated CAN/RS-485 transceivers and external 24V-tolerant analog front-ends for industrial sensor hubs.
Recomendado
HVAC Climate Controller
The SPC5604BF1MLL6 supports HVAC climate controller modules thanks to its multi-channel ADC for temperature/pressure sensors and eMIOS PWM outputs for blower and blend-door actuators. 512KB Flash stores climate algorithm, calibration curves, and fault logs, while CAN/LIN connectivity integrates into the vehicle network. AEC-Q100 over-temperature range supports under-dash thermal stress. Compared to a higher-tier MCU, the SPC5604B's specific cell counts leave ample margin for OTA-friendly firmware partitioning at competitive cost.
Recomendado
Automotive Lighting Module
The SPC5604BF1MLL6 drives exterior and interior automotive lighting modules where multiple PWM channels are needed for LED current control and dimming. eMIOS timers provide up to 16-bit PWM resolution for precise brightness, while LIN or CAN bus connectivity enables body-network integration. AEC-Q100 grade and 64MHz performance let the MCU also handle diagnostics and fault logging, simplifying BOM by replacing discrete timers. The LQFP-100 footprint is widely used in lighting ECUs.
Recomendado
Chassis and Suspension Sensor Hub
The SPC5604BF1MLL6 suits chassis sensor hubs because its 12-bit ADC captures multi-axis wheel-speed, steering-angle, and IMU data while FlexCAN streams processed values to the chassis domain. 64MHz CPU supports sensor fusion algorithms in real time, and AEC-Q100 grade tolerates suspension-turret thermal and vibration environments. Designers pair it with automotive CAN transceivers and isolated power to meet OEM chassis EMC requirements. Compared to higher-end MPC5xxx, the SPC5604B's specific cell count balances cost and capability for tier-1 sensor hubs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SPC5604BF1MLL6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SPC5604BF2MLL6 | SPC5604CF2MLL6 | SPC5604BF2CLL6R | SPC5603CF2CLL6 | SPC5603BF2MLL4R |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-100 (14x14) | LQFP-100 (14x14) - same | LQFP-100 (14x14) - same | LQFP-100 (14x14) - same | LQFP-100 (14x14) - same | LQFP-100 (14x14) - same |
| Core Architecture | Power Architecture e200z0h | Power Architecture e200z0h | Power Architecture e200z0h | Power Architecture e200z0h | Power Architecture e200z0h | Power Architecture e200z0h |
| Maximum Clock Frequency | 64 MHz | 80 MHz (+25%) | 80 MHz (+25%) | 80 MHz (+25%) | 80 MHz (+25%) | 80 MHz (+25%) |
| Flash Memory | 512 KB | 512 KB | 768 KB (+50%) | 512 KB | 384 KB (-25%) | 384 KB (-25%) |
| RAM | 32 KB | 32 KB | 48 KB | 32 KB | 28 KB | 28 KB |
| AEC-Q100 | Qualified | Qualified | Qualified | Qualified | Qualified | Qualified |
| Family / Step | MPC5604B (F1 step) | MPC5604B (F2 step) | MPC5604C (F2 step) | MPC5604B (F2 step) | MPC5603C (F2 step) | MPC5603B (F2 step) |
Principais diferenciais
- F1 step with proven automotive deployment
- Lower-cost entry into SPC5604 family
- Balanced memory tier vs SPC5603 family
Notas de projeto
Decouple VDD/VSS pins with 100nF ceramic capacitors placed as close as possible to each supply pair, plus bulk 10uF tantalum or ceramic at the regulator output. The SPC5604BF1MLL6 requires clean analog supply (VDDA) separated from digital VDD via ferrite beads or filter capacitors. Follow NXP MPC5604B hardware design guide section 4 for proper sequencing of internal voltage regulators on power-up and power-down. Estimated: at 64MHz active current is typically 80-120mA plus peripheral current; standby with RTC ~10mA.
The LQFP-100 (14x14mm) package requires a 4-layer PCB minimum for automotive EMC performance. Route all high-speed signals on inner layers with continuous reference plane, and provide thermal vias under the exposed pad. Keep crystal traces short (<10mm) and surrounded by grounded guard traces. Use impedance-controlled routing for FlexCAN signals (typically 120 ohm differential). Estimated: total GND pour should cover >60% of the inner layers for automotive OEM targets.
Do not exceed the absolute maximum ratings of 5.5V on any supply pin. The JTAG/Nexus interface requires proper TCK/TMS/TDO/TDI/TRST termination; floating TRST may prevent debugger connection. Ensure RESET is held low during power ramp until the internal 1.2V core rail stabilizes. Flash programming requires the correct RCC (Reset Configuration) word - consult the SPC5604B reference manual section 5.2 before first-time programming.
The LQFP-100 (14x14mm) package has a typical theta-JA of approximately 35-40 C/W on a 4-layer JEDEC test board. Estimated: at typical automotive ambient 85C with 200mA active current and 1.5W dissipation, junction temperature stays well below 125C, leaving margin for AEC-Q100 Grade 1 qualification. Add thermal vias and copper pours for additional heat spreading in sealed enclosures.
Informações de conformidade
AEC-Q100 Grade 1 qualified for automotive -40C to +125C operation. RoHS and REACH compliant per NXP product declarations. Halogen-free per JEDEC JS709C definition.
