TPS536C9T - Dual-Channel 12-Phase D-CAP+ Controller | TI
N.º da peça: TPS536C9T ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.2 | $82,00 |
| 100 | $7.1 | $710,00 |
| 500 | $6.4 | $3.200,00 |
| 1.000 | $5.8 | $5.800,00 |
TPS536C9T Visão geral
A multiphase buck controller is a power management IC that distributes a high-current step-down conversion across several interleaved phases, reducing input/output ripple, spreading thermal load, and improving transient response compared with a single-phase regulator. In the power management hierarchy, the TPS536C9T sits at the controller layer: it drives external smart power stages rather than integrating FETs, enabling server-class current levels far beyond what monolithic converters achieve.
Key features include the D-CAP+ control architecture for fast transient response, low output capacitance, and strong dynamic current sharing; native TLVR support for modern CPU load-transient profiles; an integrated non-volatile memory (NVM) for pin-free configuration; and compliance with the Intel VR14 SVID specification alongside a full PMBus interface for telemetry, fault management, and runtime adjustment.
Technically, the digital controller loops monitor per-phase current and temperature, and firmware-configurable parameters (stored in NVM) define phase count, switching behavior, and protection thresholds such as overcurrent, overvoltage, and overtemperature. The device is fully compatible with TI smart power stages (e.g., CSD95xxx family), simplifying design-in for multi-rail server and accelerator boards.
Typical applications include VR14-compliant CPU core power for servers and workstations, ASIC/FPGA accelerator rails, high-current point-of-load conversion in networking and datacenter equipment, and 12-phase TLVR evaluation platforms such as the TPS536C7EVM-051.
Design tip: because TLVR coupling and layout strongly affect transient performance, follow the TI layout guidelines for the SYNC/RESET and current-sense pins, and verify SVID boot sequencing against the platform's VR14 requirements.
Alternativas drop-in para TPS536C9T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com TPS536C9T (mesmo formato e footprint) — diferindo em Non-Volatile Memory, Package, Topology, Control Interface, Number of Channels.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
TPS536C9RSLR
✅ Drop-In✓ Em estoque
$14.3182 / unidade
Ver ficha técnica →TPS536C9RSLR
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$14.3182 / unidade
Ver ficha técnica →TPS536C9T Classificações máximas e características elétricas
| Topologia | Step-down multiphase buck controller (D-CAP+) |
| Canais | 2 (N + M <= 12 phases total) |
| Maximum Total Output Current | 765 A (with smart power stages) |
| Faixa de tensão de entrada | 4.5 V to 17 V |
| Output Voltage (minimum) | 0.25 V |
| Control Interface | PMBus, VR14 SVID |
| TLVR Support | Yes (trans-inductor voltage regulator) |
| Non-Volatile Memory | Built-in NVM configuration |
| Smart Power Stage Compatibility | TI smart power stages |
| Encapsulamento | 48-VFQFN (RSL), 6.00 mm x 6.00 mm, exposed pad |
| Tipo de montagem | Surface Mount |
| Protection Features | OVP, OCP, OTP, fault management via PMBus |
| Telemetry | PMBus digital telemetry and monitoring |
| Applications Standard | Intel VR14 SVID compliant |
Configuração de pinos do TPS536C9T
| Pino 1 | VDD — Controller supply voltage [VERIFY: pin assignment per datasheet] |
| Pino 19 | SYNC/RESET — Synchronization / reset function; connection guidance per TI E2E thread 1566151 |
| Pino - | PWMx — Phase PWM outputs to smart power stages (up to 12 phases) |
| Pino - | CSxP/CSxN — Per-phase current sense inputs |
| Pino - | SCL/SDA — PMBus clock and data |
| Pino - | SVID_ALERT/SVID_CLK/SVID_DATA — VR14 SVID interface signals |
| Pino - | VSEN/FB — Output voltage feedback sense |
| Pino - | GND — Ground / exposed pad thermal connection |
Aplicações típicas
TPS536C9T é adequado para 6 aplicaçãos: Server CPU Core Power (VR14), TLVR Evaluation and Transient Testing, ASIC and FPGA Accelerator Cards, Networking and Datacenter Equipment, High-Current Point-of-Load Conversion, Industrial Compute and Edge Servers.
Server CPU Core Power (VR14)
The TPS536C9T is VR14 SVID compliant, making it a natural fit for Intel server and workstation CPU core rails. Its 4.5 V to 17 V input accepts the 12 V platform rail directly, and the N + M <= 12 phase D-CAP+ architecture with TLVR support delivers the multi-hundred-amp (up to 765 A) step loads CPUs present. The SVID interface lets the CPU command voltage setpoints and operating modes in real time, while PMBus telemetry reports per-rail voltage, current, and temperature for platform health monitoring. Using TI smart power stages, designers achieve low-BOM-cost dense layouts in the 6 mm x 6 mm controller footprint.
Recomendado
TLVR Evaluation and Transient Testing
For engineers characterizing 12-phase TLVR systems, the TPS536C9T pairs with electronic loads and load slammers to validate transient response, as discussed on TI's E2E forum for the TPS536C7EVM-051 platform. TLVR coupling enables extremely fast energy transfer during microsecond load steps, and the D-CAP+ controller modulates phase behavior to exploit this. The built-in NVM allows rapid reconfiguration of phase count and loop parameters without firmware host intervention. Designers should follow the datasheet layout guidance for SYNC/RESET and current-sense routing to get repeatable slammer test results.
Recomendado
ASIC and FPGA Accelerator Cards
AI accelerators and high-end FPGA cards require core rails from 0.25 V upward at hundreds of amps. The TPS536C9T supports outputs down to 0.25 V and up to 765 A total across two channels, with dynamic current sharing that balances thermal stress across power stages. For cards without an SVID-capable host, the PMBus interface provides full runtime voltage scaling, margining, and fault handling. The D-CAP+ loop's fast transient response reduces required output capacitance, freeing board area in dense accelerator form factors such as OCP and PCIe cards.
Recomendado
Networking and Datacenter Equipment
Switch, router, and storage systems use 12 V intermediate buses feeding multiple high-current point-of-load rails. The TPS536C9T's dual-channel architecture lets one controller serve two independent high-current rails (for example, ASIC core and SERDES/PHY rails), reducing controller count. PMBus telemetry integrates with shelf-management systems for predictive maintenance, and built-in NVM stores configuration without a host boot dependency. Its 4.5 V to 17 V input tolerance covers both 12 V and intermediate 5 V buses with margin, and protection features (OVP/OCP/OTP) support high-availability requirements.
Recomendado
High-Current Point-of-Load Conversion
Any design converting a 4.5 V to 17 V bus to a sub-1 V, multi-hundred-amp rail benefits from the TPS536C9T's multiphase approach, which interleaves phases to cancel ripple and spread heat. Compared with paralleled single-phase converters, D-CAP+ provides inherent current sharing and faster transient response with less output capacitance. Designers pair the controller with TI smart power stages that integrate driver and FETs, shortening design time and improving efficiency at the low duty cycles typical of 12 V-to-0.8 V conversion. The 48-pin QFN keeps controller footprint minimal on crowded POL areas.
Recomendado
Industrial Compute and Edge Servers
Rugged edge servers and industrial compute nodes running embedded CPUs still need VR14-class core power at reduced environmental budgets. The TPS536C9T's digital loop tolerates input variation across the 4.5 V to 17 V range from noisy industrial 12 V rails, and PMBus fault reporting supports remote diagnostics in unattended installations. NVM-stored configurations survive power cycles without host intervention, speeding brown-out recovery. Its SVID compliance covers embedded Intel processor families, and phase-count flexibility lets one controller design scale across product tiers from low to 12 phases.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TPS536C9T — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | TPS536C9 | TPS536C9RSLR | TPS53622RSBT | ISL69269 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Renesas Electronics |
| Lifecycle Status | Active | Active | Active | Active | Active |
Principais diferenciais
- TLVR topology support (vs TPS536C9)
- VR14 SVID compliance with PMBus (vs TPS53622RSBT)
- Built-in NVM configuration (vs ISL69269)
Notas de projeto
Place the TPS536C9T close to the smart power stages and route each PWM output short and direct to minimize ringing. Per TI's datasheet layout section and E2E guidance, Kelvin-connect per-phase current sense (CSxP/CSxN) directly at the power stage sense points and keep the SYNC/RESET pin (pin 19) termination per datasheet recommendations. Use solid ground planes under the controller with the exposed pad soldered to a via-stitched thermal pad.
For TLVR designs, the auxiliary (ac-coupled) TLVR inductors and phase arrangement N+M strongly influence transient performance. D-CAP+ allows reduced output capacitance, but validate worst-case load steps (e.g., with an electronic load or load slammer) at maximum and minimum output voltage setpoints commanded over SVID. Confirm the smart power stage current ratings aggregate to your peak load with margin below the 765 A class ceiling.
NVM default configuration must match your phase assignment before first power-up - a mismatched phase map can trigger fault shutdowns. Also ensure SVID boot sequencing meets the platform's VR14 requirements: the CPU expects specific voltage presence before SVID handshake. If PMBus and SVID are both used, resolve interface arbitration in system firmware to avoid conflicting voltage commands.
Informações de conformidade
Compliance details not present in provided web data; verify on TI product page quality section.
