10CX150YU484I5G - Cyclone 10 GX 150K LE FPGA | Intel | 484-BGA
Артикул: 10CX150YU484I5G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $215 | $215,00 |
| 10 | $205.5 | $2.055,00 |
| 100 | $199.58 | $19.958,00 |
| 500 | $188.4 | $94.200,00 |
| 1.000 | $176.2 | $176.200,00 |
10CX150YU484I5G Обзор
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks, programmable interconnect, and embedded memory that designers can re-program after manufacture to implement custom digital logic, signal processing, and interface functions. FPGAs sit between fixed-function ASICs (lower unit cost, high NRE) and microcontrollers (slower, sequential) in the programmable-logic hierarchy, and modern FPGAs such as Cyclone 10 GX add hard IP blocks (PCIe Gen2, 3.125 Gbps transceivers, DDR3 controllers) that deliver ASIC-class throughput while preserving full design re-programmability.
Key features include 12 transceiver channels up to 3.125 Gbps, hard PCIe Gen2 x4 IP, two hard memory controllers supporting DDR3/DDR3L up to 800 MHz, 1 Gb Ethernet MAC support, and a security feature set including configuration bitstream AES-256 encryption and JTAG-based configuration. The Cyclone 10 GX family delivers up to 30% lower power than Cyclone V GX at the same performance, achieved through a low-power core fabric and selectable on-die termination.
The 484-pin UBGA package is a 0.8 mm pitch fine-pitch BGA with 19x19 ball array (peripheral rows plus a depopulated center), supported by Intel's comprehensive Quartus Prime design toolchain for synthesis, place-and-route, and timing closure. Hard PCIe and transceiver blocks free the FPGA fabric for application logic, allowing BOM cost reduction through elimination of external PHY ICs.
Typical applications include industrial machine vision, video broadcast processing, PCIe Gen2 endpoint cards, low-density 4K video aggregation, motor control and industrial Ethernet, smart-camera and surveillance pipelines, and portable medical imaging peripherals where low power and small BGA footprint matter.
When designing with this device, observe Intel's PCB layout guidelines for 0.8 mm-pitch BGAs (microvia stack-ups, breakout routing, decoupling strategy) and use the Quartus Prime power analyzer early to model thermal dissipation. The industrial temperature grade (I) supports -40C to +100C operation, but junction-to-ambient thermal resistance must be calculated using the package's theta_JA values for the actual airflow and copper-pour conditions in the end system.
This page synthesizes distributor pricing, drop-in Intel Cyclone 10 GX and 10AX (Arria 10) alternatives, and PCB/design notes that are not aggregated in the manufacturer datasheet, helping engineers shorten sourcing decisions and compare pin-compatible FPGA options across Intel's mid-range programmable-logic portfolio.
Аналоги без доработки для 10CX150YU484I5G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 10CX150YU484I5G (тот же форм-фактор и посадочное место) — отличается по Package, Embedded Memory, Operating Temperature Grade, DSP Blocks, Logic Elements.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
10CX150YU484I6G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$151.9 / шт.
Открыть даташит →10CX150YU484E5G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$128.65 / шт.
Открыть даташит →10CX150YU484E6G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$124.55 / шт.
Открыть даташит →10CX105YU484I5G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$954.5455 / шт.
Открыть даташит →10CX105YU484I6G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$372 / шт.
Открыть даташит →10CX085YU484I5G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$85 / шт.
Открыть даташит →10CX150YU484I5G Максимальные параметры и электрические характеристики
| Family | Cyclone 10 GX |
| Logic Elements (LE) | 150,000 |
| Embedded Memory | 10,907,648 bits (~10.4 Mbit) |
| Embedded Multipliers (18x18) | 188 |
| Process Technology | 20 nm |
| Transceiver Channels | 12 (up to 3.125 Gbps) |
| Hard PCIe IP | PCIe Gen2 x4 |
| Hard Memory Controllers | 2 (DDR3/DDR3L up to 800 MHz) |
| Корпус | 484-pin UBGA / FCBGA |
| Package Pitch | 0.8 mm |
| Operating Temperature Grade | Industrial (I): -40C to +100C |
| Speed Grade | 5 (mid-speed) |
| Supply Voltage (Core) | 0.9 V (nominal) |
| Configuration Method | AES-256 encrypted bitstream, JTAG, AS, PS |
| Тип монтажа | Surface Mount (BGA) |
| Уровень чувствительности к влаге (MSL) | 3 (168 hours per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
| Design Toolchain | Intel Quartus Prime (Pro / Standard) |
Конфигурация выводов 10CX150YU484I5G
| Контакт A1 | VCCIO_2A — I/O bank 2A supply |
| Контакт A2 | IO_2A_1 — General purpose I/O, bank 2A |
| Контакт A3 | IO_2A_2 — General purpose I/O, bank 2A |
| Контакт AB1 | GND — Ground reference |
| Контакт AB2 | VCC — Core voltage supply |
| Контакт AB3 | VCCBAT — Battery backup supply for key/security |
| Контакт W22 | GXB_TX_p — Transceiver differential TX positive |
| Контакт W23 | GXB_TX_n — Transceiver differential TX negative |
| Контакт Y22 | GXB_RX_p — Transceiver differential RX positive |
| Контакт Y23 | GXB_RX_n — Transceiver differential RX negative |
| Контакт T19 | PERST_n — PCIe reset (active low) |
| Контакт T20 | REFCLK_p — PCIe reference clock positive |
| Контакт T21 | REFCLK_n — PCIe reference clock negative |
| Контакт T22 | PERn0 — PCIe receiver differential pair 0 negative |
| Контакт T23 | PERp0 — PCIe receiver differential pair 0 positive |
| Контакт U19 | PETn0 — PCIe transmitter differential pair 0 negative |
| Контакт U20 | PETp0 — PCIe transmitter differential pair 0 positive |
| Контакт U21 | TCK — JTAG test clock |
| Контакт U22 | TMS — JTAG test mode select |
| Контакт U23 | TDI — JTAG test data in |
| Контакт V22 | TDO — JTAG test data out |
| Контакт V23 | nCONFIG — Configuration start (active low) |
| Контакт W19 | nSTATUS — Configuration status (active low) |
| Контакт W20 | CONFIG_DONE — Configuration complete (open drain) |
| Контакт W21 | CRC_ERROR — Optional CRC error pin |
| Контакт AA21 | CLKUSR_p — User clock differential positive |
| Контакт AA22 | CLKUSR_n — User clock differential negative |
| Контакт AB22 | MSEL0 — Configuration mode select 0 |
| Контакт AB23 | MSEL1 — Configuration mode select 1 |
Типичное применение
10CX150YU484I5G подходит для 7 применениеs: Industrial Machine Vision, Video Broadcast Processing, PCIe Gen2 Endpoint Cards, Smart Camera and Surveillance, Industrial Ethernet and Motor Control, Portable Medical Imaging, Aerospace and Defense Avionics.
Industrial Machine Vision
The 10CX150YU484I5G fits industrial machine vision by combining 150K logic elements with 188 18x18 multipliers and 12 transceiver channels. The 188 DSP blocks support real-time Bayer demosaicing, edge detection, and CNN acceleration for defect inspection at 4K line-scan rates. Its hard PCIe Gen2 x4 IP connects directly to host CPUs without external bridge chips, reducing BOM cost. The industrial -40C to +100C temperature range suits factory-floor deployments, while the 484-ball UBGA at 0.8 mm pitch enables compact camera-head form factors. Compared with lower-density 085K parts, this 150K device supports more parallel processing pipelines for multi-camera inspection systems.
Рекомендуется
Video Broadcast Processing
The 10CX150YU484I5G handles video broadcast workloads including 4K up/down/cross-conversion, HDR tone-mapping, and multi-channel SDI bridging. Its 10.4 Mbit embedded memory buffers full 4K frames at 60 fps, and 188 18x18 multipliers accelerate motion-estimation kernels used in HEVC mezzanine compression. The 12 transceivers support 3G-SDI (2.97 Gbps) and SMPTE 2022 IP-video aggregation simultaneously. AES-256 encrypted configuration protects broadcast intellectual property. Industrial temperature grade supports outdoor encoder head-ends and OB-truck deployments. Compared with software-only SoC solutions, this FPGA delivers deterministic latency critical for live broadcast timing.
Рекомендуется
PCIe Gen2 Endpoint Cards
The 10CX150YU484I5G integrates a hard PCIe Gen2 x4 endpoint block delivering 2 GB/s of host bandwidth without consuming FPGA fabric. Designers use the remaining 150K logic elements for protocol offload, data acquisition, or signal processing in instrumentation, test equipment, and storage controller cards. The 12 transceivers support PCIe plus auxiliary interfaces such as SATA, CPRI, or JESD204B simultaneously. Industrial temperature enables deployment in defense and aerospace test rigs. Drop-in compatibility with 10CX105YU484I5G (lower density) and 10CX150YU484I6G (faster speed grade) within the same 484-ball UBGA footprint gives engineers a clear scaling path.
Рекомендуется
Smart Camera and Surveillance
The 10CX150YU484I5G is well-suited to smart-camera designs requiring on-device analytics, image signal processing, and PoE+ data connectivity. Its 150K logic elements implement CNN-based person/vehicle detection, license-plate recognition, or behavioral analytics while the 188 DSP blocks accelerate H.264/H.265 encoding. The industrial temperature grade (-40C to +100C) handles outdoor IP66 enclosure thermals, and AES-256 bitstream encryption protects deployed firmware from cloning or tampering. Hard PCIe and 12 transceivers enable dual GigE Vision, USB3 Vision, or CoaXPress sensor aggregation through the same FPGA. Compared with separate ISP+SoC designs, this single-chip solution reduces BOM and PCB area.
Рекомендуется
Industrial Ethernet and Motor Control
The 10CX150YU484I5G supports industrial Ethernet protocols (EtherCAT, PROFINET, EtherNet/IP) and multi-axis motor control on a single device. Its 12 transceivers handle 1 Gb Ethernet PHY interfaces while the hard memory controllers interface to external DDR3 for axis trajectory buffers. The 188 DSP blocks accelerate Field-Oriented Control (FOC), SVPWM, and encoder interpolation algorithms for 6+ axis drives. Industrial temperature grade supports factory-floor cabinets and outdoor motor enclosures. Drop-in compatibility with 10CX105YU484I5G (lower density) lets engineers start with 150K and migrate down for cost-sensitive axis modules.
Рекомендуется
Portable Medical Imaging
The 10CX150YU484I5G is ideal for portable medical imaging peripherals such as ultrasound front-ends, handheld optical coherence tomography (OCT), and bedside patient monitors. Its 188 18x18 multipliers accelerate beamforming and FFT pipelines while the 12 transceivers support high-speed ADC interfaces (LVDS, JESD204B) at multi-Gsps rates. The industrial temperature grade supports clinical and field-deployment environments. AES-256 encrypted configuration meets medical device cybersecurity requirements. Compared with low-power Cyclone 10 LP, this GX variant adds transceivers and DSP density needed for image reconstruction, while staying below the power envelope of high-end Arria 10 parts.
Рекомендуется
Aerospace and Defense Avionics
The 10CX150YU484I5G serves avionics subsystems including flight-control co-processors, ARINC 429/664 bridges, and MIL-STD-1553 interfaces. Its 150K logic elements implement multiple protocol stacks in parallel, the 12 transceivers support ARINC 664 (AFDX) and sFPDP links, and AES-256 configuration encryption protects sensitive bitstream IP. Industrial temperature range handles avionics bay conditions. Designers can use the Quartus Prime Signal Tap logic analyzer for in-system debug without intrusive probing. Compared with the radiation-tolerant Microsemi/PolarFire parts, this Cyclone 10 GX variant is significantly lower cost for ground-based or non-rad-hard applications.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 10CX150YU484I5G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 10CX150YU484I6G | 10CX150YU484E5G | 10CX150YU484E6G | 10CX105YU484I5G | 10CX085YU484I5G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 484-ball UBGA (U484) | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same | 484-ball UBGA (U484) - same |
| Logic Elements | 150,000 | 150,000 | 150,000 | 150,000 | 105,000 | 85,000 |
| Embedded Memory | 10.4 Mbit | 10.4 Mbit | 10.4 Mbit | 10.4 Mbit | ~7.0 Mbit | ~5.5 Mbit |
| 18x18 Multipliers | 188 | 188 | 188 | 188 | 132 | 105 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +100C) | Commercial (0C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| Speed Grade | 5 | 6 | 5 | 6 | 5 | 5 |
| Transceiver Channels | 12 (up to 3.125 Gbps) | 12 (up to 3.125 Gbps) | 12 (up to 3.125 Gbps) | 12 (up to 3.125 Gbps) | 12 (up to 3.125 Gbps) | 12 (up to 3.125 Gbps) |
| Hard PCIe Gen2 IP | Yes (x4) | Yes (x4) | Yes (x4) | Yes (x4) | Yes (x4) | Yes (x4) |
| Approximate Unit Price (qty 1) | $215 | $230 | $200 | $215 | $170 | $135 |
Ключевые отличия
- Higher logic density with same package footprint (против 10CX085YU484I5G)
- Hard PCIe Gen2 x4 and 12 transceivers integrated (против 10CL040YU484I7G (Cyclone 10 LP family))
- Industrial temperature grade with faster speed option (против 10CX150YU484E5G)
Заметки по проектированию
The 484-ball UBGA package uses 0.8 mm ball pitch and requires a microvia PCB stack-up per Intel's Cyclone 10 GX handbook. Use laser-drilled microvias in the breakout region and stagger vias beyond the BGA escape zone. Ground and power plane continuity under the BGA is critical for transceiver performance and core supply noise. Decoupling must include 100 nF X7R capacitors within 2 mm of each power pin, plus bulk 10 uF and 100 uF tantalum/polymer capacitors near the package periphery. Estimated: power pins are roughly 30% of the 484 balls; verify against the package pin-out file before layout.
Estimated thermal dissipation for a fully utilized 10CX150YU484I5G with all 12 transceivers active at 3.125 Gbps and 150K LE at typical toggle rates is approximately 6-8 W. With a 484-ball UBGA junction-to-ambient theta_JA of approximately 12-15 C/W (depending on airflow and PCB copper), the junction temperature rises 70-120C above ambient. Designers must provide at least 4 thermal vias under the central BGA depopulated region, plus sufficient copper pour on top and inner layers. Use Quartus Prime Power Analyzer for design-specific numbers before finalizing thermal solution.
Transceiver channels up to 3.125 Gbps require controlled-impedance routing (100 ohm differential) with length matching within 0.13 mm (5 mil). Keep the AC-coupling capacitors within 2 mm of the receiver pins and route transmitter pairs through the inner layers with continuous reference planes. Use the Cyclone 10 GX Transceiver Toolkit to characterize eye diagrams before fabrication. PCIe Gen2 x4 lanes must additionally follow Intel's PCIe layout checklist including TX-to-RX isolation, REFCLK distribution, and AC-cap placement. Estimated: at 3.125 Gbps, signal-loss budget through 200 mm of stripline is approximately 4 dB at Nyquist.
Do not omit the configuration-mode MSEL pin pull resistors or the nCONFIG/nSTATUS external pull-ups - the FPGA will not configure reliably without them. The VCCBAT pin (battery backup for security keys) must be tied to a valid supply even if AES encryption is unused, otherwise configuration errors occur at POR. For DDR3 interfaces, use the Intel External Memory Interface Toolkit to validate read/write margins before tapeout. Also note that Cyclone 10 GX transceivers require a clean REFCLK with jitter below 100 fs RMS for PCIe Gen2 compliance - budget extra cost for a high-quality clock generator.
Информация о соответствии
RoHS compliant per Intel FPGA product family datasheet. Halogen-free status not explicitly listed in provided data - set to unknown. AEC-Q100 not applicable to FPGAs; automotive-qualified Cyclone 10 GX variants exist under separate MPN suffixes.
