A42MX09-3PQG160 - 14K Gate 5V FPGA 160-BQFP | Microchip
Артикул: A42MX09-3PQG160 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $31.8 | $3.180,00 |
| 500 | $29.1 | $14.550,00 |
| 1.000 | $26.4 | $26.400,00 |
A42MX09-3PQG160 Обзор
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer wires together post-manufacture. Within the programmable logic hierarchy, FPGAs sit above CPLDs and PLDs in capacity and flexibility, and the MX family is a single-chip, antifuse-style ASIC alternative specifically positioned for integrating legacy 5.0V PLD designs into one low-cost, high-volume device.
Key features include a 5.0V-tolerant architecture that directly interfaces with legacy 5V bus systems without level shifting, 684 CLBs of programmable logic, and speed-grade -3 timing supporting internal clock rates up to 268 MHz. The 101 available user I/O pins and the 160-BQFP package make the device well suited to through-hole-replacement and industrial retrofits where QFP soldering and 5V compatibility are required. The MX fabric offers deterministic, ASIC-like timing suited to high-volume, cost-sensitive production.
Architecturally, the MX family uses a flexible logic module approach with combinational and sequential modules, providing an efficient platform for state machines, glue logic consolidation, and legacy PLD migration. As a one-time-programmable single-chip solution, it removes configuration PROMs and improves reliability compared to SRAM-based FPGAs.
Typical applications include industrial control consolidation, legacy PLD integration, telecommunications line cards operating at 5V, military/industrial upgrade programs, and high-volume ASIC prototyping alternatives.
Design consideration: verify I/O allocation early, since the 101-user-I/O limit and fixed 160-BQFP pinout require pin planning before PCB layout; also confirm 5V supply integrity with adequate decoupling near all VCC pins.
Аналоги без доработки для A42MX09-3PQG160 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A42MX09-3PQG160 (тот же форм-фактор и посадочное место) — отличается по RoHS Status, Family, Package, System Gates, Speed Grade.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
A42MX09-PQG160M
✅ Прямая замена✓ В наличии
$29.8 / шт.
Открыть даташит →A42MX09-3PQG160M
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
A42MX16-2PQG160I
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1 / шт.
Открыть даташит →A42MX24-2PQG160I
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$44 / шт.
Открыть даташит →A42MX09-3PQG160 Максимальные параметры и электрические характеристики
| Family | MX (Actel/Microsemi) |
| System Gates | 14000 |
| Configurable Logic Blocks (CLBs) | 684 |
| Number of I/Os | 101 |
| Напряжение питания | 5.0 V |
| Maximum Frequency | 268 MHz |
| Speed Grade | 3 |
| Programmable Type | Field Programmable Gate Array (FPGA) |
| Корпус | 160-BQFP |
| Тип монтажа | Surface Mount |
| Technology | CMOS |
| Product Series | A42MX09 |
| Lead Free | Yes (LEAD FREE per distributor data) |
Руководство по цоколевке A42MX09-3PQG160 в корпусе 160-bqfp
Цоколевка для A42MX09-3PQG160 (корпус 160-bqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A42MX09-3PQG160.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A42MX09-3PQG160 подходит для 6 применениеs: Legacy PLD Integration, Industrial Control Systems, Telecommunications Line Cards, Military and Defense Upgrades, ASIC Prototyping Alternative, Test and Measurement Equipment.
Legacy PLD Integration
The A42MX09-3PQG160 consolidates multiple legacy 5V PLDs, GALs, and PALs into a single 14K-gate device, directly matching the 5.0V I/O levels of legacy buses without level shifters. With 684 CLBs and 101 user I/Os, typical multi-PLD glue-logic boards fit comfortably within the fabric. As a one-time-programmable single-chip solution it eliminates configuration PROMs and their boot-time dependencies, improving system reliability and reducing BOM count in high-volume industrial retrofits.
Рекомендуется
Industrial Control Systems
In industrial controllers, the A42MX09-3PQG160 provides deterministic ASIC-like timing for state machines, interlocks, and motor sequencing logic at up to 268 MHz internal operation on a robust 5.0V rail common in factory environments. The 101 user I/Os interface directly with 5V sensors, relays, and optocoupler outputs. The 160-BQFP package is hand-solderable for service and rework, and the PQ160 footprint is shared with A42MX16/A42MX24 for future logic expansion without PCB redesign.
Рекомендуется
Telecommunications Line Cards
5V-tolerant telecom backplanes and line cards benefit from the MX family's native 5.0V architecture, which connects directly to legacy E1/T1 framer and backplane signaling levels. The 268 MHz speed grade supports timing-critical framing and multiplexing logic, while 101 I/O pins handle address, data, and control buses. One-time programmability removes SRAM configuration overhead, ensuring the card is functional at power-up with no configuration controller or serial PROM required.
Рекомендуется
Military and Defense Upgrades
The A42MX09-3PQG160M military variant and the PQG160M packaging options serve defense sustainment programs replacing obsolete bipolar PLDs. The MX family's single-chip, non-volatile nature and 5.0V tolerance match rack-level legacy power rails. With 14K gates and 684 CLBs, radar interface glue logic, bus arbiters, and test-point multiplexing consolidate reliably. The identical 160-BQFP footprint across military and industrial variants simplifies dual-source qualification within the same PCB layout.
Рекомендуется
ASIC Prototyping Alternative
For low- to mid-volume ASIC replacements, the A42MX09-3PQG160 offers a one-time-programmable, single-chip ASIC alternative at 14K gates. Deterministic antifuse-style timing simplifies static timing analysis versus SRAM FPGAs, and the fixed 5.0V fabric matches the ASIC's original I/O environment. Designers implement the netlist once with Microchip/Microsemi Designer software and program via standard programmers, avoiding mask charges while keeping per-unit cost low at high volumes.
Рекомендуется
Test and Measurement Equipment
Bench and ATE instruments use the A42MX09-3PQG160 for trigger logic, timing generators, and bus-interface glue logic where deterministic sub-microsecond response matters. The 5.0V fabric drives legacy instrument backplane signals directly with 101 I/Os, and 268 MHz speed-grade performance covers high-resolution counter and encoder interfaces. Its non-volatile configuration ensures the instrument powers up immediately with no boot latency, an important requirement for production test-floor equipment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A42MX09-3PQG160 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A42MX09-PQG160M | A42MX09-3PQG160M | A42MX16-2PQG160I | A42MX24-2PQG160I |
|---|---|---|---|---|---|
| Package | 160-BQFP (PQ160) | 160-BQFP (PQ160) - same | 160-BQFP (PQ160) - same | 160-BQFP (PQ160) - same | 160-BQFP (PQ160) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 14000 | 14000 | 14000 | 16000-class | 24000-class |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
Ключевые отличия
- Native 5.0V architecture (против Modern low-voltage FPGAs)
- One-time-programmable single-chip operation (против A42MX24-2PQG160I)
- Cost-optimized density point (против A42MX16-2PQG160I)
Заметки по проектированию
The MX family operates on a single 5.0V rail. Decouple every VCC pin pair on the 160-BQFP with 0.1uF ceramic capacitors placed within 5 mm of the pin, plus at least 10uF of bulk capacitance per device. Because the fabric is one-time-programmable and draws current primarily during switching, estimate worst-case current from post-layout static timing simulation of the actual design rather than the family typical figure.
The 160-BQFP has 0.65mm-pitch leads; design land patterns per the Microchip MX datasheet packaging section. Allocate I/O early - only 101 of the 160 pins are user I/O, and the remaining pins are power, ground, and program/verify pins that must not be loaded during operation. Reserve the program-related pins with series resistors to allow in-system or bench programming access.
The A42MX09 is one-time-programmable: an incorrect fuse program cannot be erased, so always verify the design in simulation and on a development device before committing production units. Also remember the PQ160 footprint is shared with A42MX16 and A42MX24 - keep layout flexibility by routing spare fabric-routed I/O to test points, enabling a no-PCB-change density upgrade later.
Информация о соответствии
Distributor data (PCB Electronics Supply Chain) lists A42MX09-3PQG160 as LEAD FREE. Full RoHS/REACH certificate status should be confirmed with Microchip environmental documentation for this ordering code.
