Analog Devices

AD5316ARU - Quad 10-Bit DAC, 2.5-5.5V | Analog Devices

Артикул: AD5316ARU ✓ Активен
2.5 V to 5.5 V Vdss 500 µA at 3 V Id 16-lead TSSOP Package 400 kHz Speed
MOQ: 1 |

AD5316ARU Обзор

The Analog Devices AD5316ARU is a four-channel, 10-bit, buffered voltage-output digital-to-analog converter operating from a single 2.5 V to 5.5 V supply in a 16-lead TSSOP package. It combines four DAC channels with a 2-wire serial interface capable of operating at clock rates up to 400 kHz.

A digital-to-analog converter is an interface IC that converts digital control words into proportional analog voltages. The AD5316 belongs to the DAC hierarchy, where it sits between a digital bus and precision analog test, control, or instrumentation circuitry. Its buffered outputs reduce the need for external output amplifiers when driving moderate loads.

The four converters provide 10-bit resolution, and the A-grade device has an integral nonlinearity specification of ±4 LSB. On-chip output amplifiers support rail-to-rail output swing with a slew rate of 0.7 V/µs. The single-supply operating range covers both 3.3 V and 5 V systems, while the typical supply current is 500 µA at 3 V for low-power portable and industrial designs.

The AD5316 uses a 2-wire serial interface operating up to 400 kHz and is compatible with SMBus-style communication. Each channel provides an independently programmable output voltage through its corresponding DAC register. The interface allows a microcontroller, embedded processor, or programmable controller to update four analog outputs while minimizing the number of signal connections required on the PCB.

Typical applications include process-control setpoints, automated test equipment, sensor excitation and bias control, industrial data acquisition, programmable laboratory supplies, and low-power embedded instrumentation. The quad-channel arrangement is particularly useful when a system requires several independently controlled analog outputs but has limited connector and routing space.

PCB design should keep the serial interface and output routing compact while observing the analog-ground and supply-return paths recommended in the manufacturer datasheet. Decoupling capacitance should be placed close to the supply pins, and output loads should be checked against the buffered-output capabilities. The 0.7 V/µs slew rate should also be considered when designing waveforms that require rapid output transitions.

This page combines the manufacturer's device characteristics, package and interface details, comparison guidance, and practical application guidance to help engineers evaluate the AD5316ARU without relying only on a basic catalog listing.

Аналоги без доработки для AD5316ARU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

AD5316ARUZ

✅ Прямая замена
📦 TSSOP-16
Same 4-channel, 10-bit DAC configuration and TSSOP-16 package; ordering and shipment configuration differ by 0 V in core electrical parameters.

📋 Справочный аналог (нет в каталоге)

AD5316ARU-REEL7

✅ Прямая замена
📦 TSSOP-16
Same AD5316ARU core configuration and TSSOP-16 package; reel shipment code differs with 0 V change to the stated supply voltage.

📋 Справочный аналог (нет в каталоге)

AD5306ARUZ

✅ Прямая замена
📦 TSSOP-16
Resolution is 8 bits versus 10 bits, a 20% reduction in bit depth, while supply voltage and TSSOP-16 family construction remain comparable.

📋 Справочный аналог (нет в каталоге)

AD5317BRUZ

✅ Прямая замена
📦 TSSOP-16
Higher-resolution family member in a comparable TSSOP-16 configuration; resolution improves by approximately 20% versus 10 bits.

📋 Справочный аналог (нет в каталоге)

AD5316RBRUZ

✅ Прямая замена
📦 TSSOP-16
Newer nanoDAC-family implementation with an on-chip 2.5 V, 2 ppm/°C reference and power-on reset; resolution remains 10 bits.

📋 Справочный аналог (нет в каталоге)

AD5316ARU Максимальные параметры и электрические характеристики

Number of DAC Channels 4 channels
DAC Resolution 10 bits
Supply Voltage Range 2.5 V to 5.5 V
Typical Supply Current 500 µA at 3 V
Тип выхода Buffered voltage output
Output Swing Rail-to-rail
Output Slew Rate 0.7 V/µs
Integral Nonlinearity ±4 LSB for A grade
Serial Interface 2-wire serial interface
Maximum Serial Clock Rate 400 kHz
Serial Interface Compatibility SMBus-compatible
Reference Type External reference
Корпус 16-lead TSSOP
Количество выводов 16 pins
Тип монтажа Surface mount
Диапазон рабочих температур -40 °C to +105 °C
Screening Level Industrial
Power Dissipation 2.5 mW
Статус RoHS unknown
REACH Status unknown

Руководство по цоколевке AD5316ARU в корпусе 16-lead tssop

Цоколевка для AD5316ARU (корпус 16-lead tssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 16-lead tssop для AD5316ARU

Нет подробных данных о распиновке для AD5316ARU.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD5316ARU подходит для 6 применениеs: Industrial Process Control, Programmable Test Equipment, Sensor Excitation and Biasing, Programmable Laboratory Supplies, Data Acquisition Systems, Embedded Instrumentation.

🏭

Industrial Process Control

The AD5316ARU fits four-channel process-control systems that must convert digital setpoints into analog actuator commands. Its 10-bit resolution provides 1,024 codes per channel, while the four buffered outputs allow multiple control loops to share one controller. The 2-wire interface operates up to 400 kHz, reducing wiring in distributed control equipment, and the 2.5 V to 5.5 V supply range supports both 3.3 V and 5 V industrial controller platforms. Verify the external reference, output range, and load impedance against each loop before production deployment.

🔧

Programmable Test Equipment

The AD5316ARU can generate up to four independent analog test stimuli in programmable instrumentation. A 10-bit command word gives each channel 1,024 output levels, which is useful for coarse source calibration, relay or amplifier control, and fixture biasing. Its 400 kHz 2-wire interface allows a test controller to load a sequence of channel values efficiently, while buffered outputs reduce the need for separate output amplifiers. For metrology paths demanding finer resolution, use a higher-resolution DAC and recalibrate the source path.

🧩

Sensor Excitation and Biasing

The AD5316ARU is suitable for multi-channel sensor-bias and excitation systems where four independently adjustable voltages are needed. By placing each DAC output near the associated input network, the 2-wire architecture reduces routing across a measurement board. The 0.7 V/µs output slew rate supports relatively quick settling after code changes, and the low 500 µA typical supply current at 3 V suits compact acquisition modules. Confirm output settling at the required accuracy and ensure the external reference does not introduce noise into the measurement front end.

⚡

Programmable Laboratory Supplies

A laboratory supply controller can use the AD5316ARU to generate four low-level voltage commands for DUT bias, limit setting, or calibration fixtures. The device's 10-bit resolution and rail-to-rail buffered outputs are appropriate when the control path does not require ultra-high precision. Since the outputs are voltage commands rather than direct power-stage drivers, the design should add appropriate amplifiers when driving heavier loads. The 400 kHz serial rate permits coordinated multi-channel updates, which is useful for matching polarity or level changes across a fixture.

📡

Data Acquisition Systems

The AD5316ARU can supply programmable control or excitation voltages in compact data-acquisition equipment. Four channels let the acquisition controller manage several analog output functions without allocating a separate DAC package for each signal. The 2.5 V minimum supply supports low-voltage embedded designs, while the typical 500 µA current at 3 V helps limit power demand. The serial interface should be routed away from high-gain analog inputs, and the reference and DAC return paths should be arranged according to the manufacturer's layout guidance.

📱

Embedded Instrumentation

The AD5316ARU is appropriate for embedded instrumentation that needs multiple analog control outputs without adding extensive digital wiring. Its four 10-bit channels and SMBus-compatible 2-wire interface align with microcontroller-based instrumentation, while the TSSOP-16 package supports compact board layouts. The buffered outputs can drive normal instrumentation signal-conditioning inputs, but external buffering may be required for high capacitance or long cable runs. Account for the 0.7 V/µs slew rate when sequencing commands through switched test paths.

Сводка рекомендуемых товаров

AD5306 Lower-resolution member of the same four-channel DAC family Используется в: Industrial Process Control, Sensor Excitation and Biasing, Data Acquisition Systems AD5326 Higher-resolution member of the same four-channel DAC family Используется в: Industrial Process Control, Programmable Test Equipment, Programmable Laboratory Supplies, Data Acquisition Systems AD5316R Newer quad DAC family with integrated reference and reset options Используется в: Programmable Test Equipment, Sensor Excitation and Biasing, Programmable Laboratory Supplies, Embedded Instrumentation AD5317 Comparable buffered-output family member for additional resolution Используется в: Embedded Instrumentation
What is the AD5316ARU?
The AD5316ARU is a four-channel, 10-bit buffered voltage-output DAC from Analog Devices. It operates from a single 2.5 V to 5.5 V supply, uses a 2-wire serial interface rated up to 400 kHz, and is packaged in a 16-lead TSSOP. According to the Analog Devices AD5316 product page, the on-chip output amplifiers provide rail-to-rail output swing with a slew rate of 0.7 V/µs.
What is the operating voltage of AD5316ARU?
The AD5316ARU operates from a single 2.5 V to 5.5 V supply. The manufacturer specifies a typical supply current of 500 µA at 3 V, making the device suitable for both 3.3 V and 5 V embedded systems. This supply range applies to the DAC core and interface circuitry; the external reference must remain compatible with the selected output range and supply voltage.
How many DAC channels and bits does AD5316ARU have?
The AD5316ARU contains four independent 10-bit voltage-output DAC channels. Its A-grade integral nonlinearity is specified as ±4 LSB, while the buffered outputs support rail-to-rail swing. According to the Analog Devices product page, the device combines the four converters, output amplifiers, and a shared 2-wire interface in a 16-lead TSSOP package.
What is the AD5316ARU serial interface clock rate?
The AD5316ARU supports serial clock rates up to 400 kHz through its 2-wire interface. The manufacturer describes this interface as SMBus-compatible, allowing the DAC channels to be controlled by a compatible microcontroller or embedded controller. Keep the serial traces short, route them away from sensitive output paths, and use the pin descriptions and interface timing diagrams in the manufacturer datasheet when programming the device.
What can replace AD5316ARU?
AD5316ARUZ is the closest same-package ordering option identified for the AD5316ARU because it retains the TSSOP-16 device configuration and changes the shipment format. A replacement should still be checked for accuracy grade, temperature range, pin assignments, reference requirements, and ordering code. Use the Request a Quote form on this page to confirm the exact suffix, quantity, and availability before committing a replacement to the BOM.
Where can I download the AD5316ARU datasheet PDF?
The official AD5316ARU documentation starts with the Analog Devices AD5316 product page at https://www.analog.com/en/products/ad5316.html, where the manufacturer provides the datasheet and device resources. Use the package drawing, pin-description table, electrical characteristics, and interface timing diagrams from that document when assigning PCB tracks. The AD5316ARU ordering suffix identifies the industrial A-grade device within the AD5316 family.
Where can I find the AD5316ARU pinout?
The AD5316ARU pin assignments are shown in the pin-description table and package drawing within the Analog Devices AD5316 datasheet. The device uses a 16-lead TSSOP package with four buffered analog outputs and a 2-wire serial interface. Before assigning PCB nets, verify the exact pin numbers against the manufacturer drawing rather than relying on the physical orientation of another TSSOP component.
AD5316ARU vs AD5316ARUZ - what is the difference?
The AD5316ARU and AD5316ARUZ are closely related AD5316 catalog entries with the same 10-bit, four-channel buffered DAC architecture and TSSOP-16 package. Their distinction is the ordering and shipment configuration rather than a change in resolution or interface type. Confirm the accuracy grade, temperature range, packing form, and manufacturer ordering information before using one designation in place of the other.
When should I choose AD5316ARU over AD5317BRUZ?
Choose AD5316ARU when the system requires a four-channel, 10-bit buffered DAC with a 2-wire interface and 2.5 V to 5.5 V single-supply operation. AD5317BRUZ is the relevant comparison candidate when greater output resolution is required. Confirm pin compatibility and all electrical limits in the manufacturer documentation before substitution, because resolution changes can affect calibration, output-code behavior, and system accuracy.
Is AD5316ARU suitable for precision test and measurement equipment?
The AD5316ARU is suitable for multichannel setpoint generation in test and measurement equipment where 10-bit resolution and buffered voltage outputs are sufficient. Its four channels reduce serial-interface overhead, while the 400 kHz clock rate supports coordinated updates of multiple analog values. For precision requirements exceeding 10-bit resolution or requiring a selectable internal reference, evaluate a higher-resolution or newer nanoDAC family member.
What are the key specifications of AD5316ARU that engineers should know?
The AD5316ARU provides four 10-bit buffered voltage outputs, a 2.5 V to 5.5 V supply range, a 400 kHz 2-wire interface, and a 0.7 V/µs output slew rate. Typical supply current is 500 µA at 3 V, and the A-grade device is specified at ±4 LSB integral nonlinearity. It is offered in a 16-lead TSSOP package for surface-mount industrial designs.
What is the best cross-brand equivalent for AD5316ARU?
No cross-brand drop-in equivalent can be confirmed from the available technical documentation. A valid replacement must match the TSSOP-16 footprint, pin assignments, 2-wire interface timing, reference arrangement, output range, and critical accuracy specifications. A device advertised with the same resolution and package is not automatically interchangeable, so request manufacturer documentation and validate the candidate in the intended reference and output-loading circuit.
Where can I buy AD5316ARU online?
The AD5316ARU can be requested through the Request a Quote form on this page, where the required part number, quantity, shipment format, and target delivery information can be specified. Availability and lead time should be confirmed for the exact suffix before placing a production order. The quoting process is preferable to assuming that another package, accuracy grade, or ordering suffix has identical availability.
What is the price of AD5316ARU?
Current pricing for the AD5316ARU is supplied through the Request a Quote form on this page rather than embedded in the technical description. Submit the required quantity, package format, and delivery destination to obtain a current quotation. For production planning, confirm whether the quote applies to the AD5316ARU ordering suffix exactly and whether any volume or reel-format adjustments are needed.
What is the lead time and stock status for AD5316ARU?
Current stock and lead time for the exact AD5316ARU ordering suffix should be confirmed through the Request a Quote form on this page. Include the required quantity, delivery date, and shipment format so the response reflects the actual procurement request. Do not infer stock status from the manufacturer product page or from a different AD5316 suffix, because accuracy grade and packing configuration can affect availability.

Справочные инженерные данные для AD5316ARU — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AD5316ARU when a compact system requires four independently programmable, buffered 10-bit outputs and can manage an external reference. It is particularly suitable for 3.3 V or 5 V embedded instrumentation, industrial setpoint generation, and test fixtures where the 400 kHz interface speed is sufficient. AD5316ARUZ or AD5316ARU-REEL7 may fit procurement or assembly requirements, but confirm the exact ordering and shipment configuration. AD5306ARUZ is appropriate only when 8-bit resolution is acceptable. AD5317BRUZ should be considered when greater resolution is valuable, subject to confirming its exact electrical and pin-compatibility requirements. AD5316RBRUZ is attractive for a new design requiring an internal reference and power-on reset, but its reference and reset architecture differs from the AD5316ARU. For every substitution, review the manufacturer pinout, timing, reference, accuracy, and thermal information before releasing production artwork.

Сравнение с аналогами

Параметр Этот товар AD5316ARUZ AD5316ARU-REEL7 AD5306ARUZ AD5317BRUZ AD5316RBRUZ
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of DAC Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels

Ключевые отличия

  • Exact AD5316ARU ordering configuration (против AD5316ARUZ)
  • Balanced resolution for multichannel control (против AD5306ARUZ)
  • External-reference architecture (против AD5316RBRUZ)

Заметки по проектированию

Place the supply bypass capacitor directly between the supply and ground pins, and keep the external reference and reference-return traces short. Route the 2-wire interface away from the four analog outputs and sensitive input circuits. The TSSOP-16 footprint is compact, so leaving adequate spacing around the pins improves soldering access and reduces the chance of accidental bridges between adjacent nets.

Use the manufacturer pin-description table when assigning the SDA-like clock, SCL-like data, reference, supply, ground, and four analog-output nets. Verify that each output trace has a return path and is not routed beside a switching node. If an output drives a capacitive load, keep the load modest or add an isolation resistor and external buffer because the 0.7 V/µs slew rate can produce edge-related settling and crosstalk.

Do not treat a family member with the same package as automatically interchangeable. Confirm pin numbering, accuracy grade, temperature rating, reference voltage, output range, interface protocol, and ordering suffix before replacing the AD5316ARU. The AD5316R family adds an internal reference and power-on-reset functionality, so its control behavior may differ even though all listed alternatives use a TSSOP-16 package.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is described as an industrial-grade component, but no specific RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration is stated on the manufacturer product page. The AD5316ARU is not presented as an AEC-Q100-qualified automotive device.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD5316ARU datasheet AD5316ARU datasheet pdf AD5316ARU pinout AD5316ARU TSSOP-16 AD5316ARU equivalent AD5316ARU replacement AD5316ARU cross reference AD5316ARU vs AD5317BRUZ AD5316ARU price AD5316ARU stock Analog Devices AD5316ARU AD5316ARU application circuit

Связанные компоненты & термины

Analog Devices AD5316ARU AD5316ARUZ AD5316R AD5306 AD5317 AD5326 digital-to-analog converter DAC voltage-output DAC quad DAC nanoDAC 2-wire serial interface SMBus buffered output amplifier rail-to-rail output integral nonlinearity external reference TSSOP-16 TSSOP package family surface-mount technology SMD industrial process control test and measurement sensor excitation programmable laboratory supply data acquisition embedded instrumentation RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ