DSPIC33CH128MP505-I/M4 - 200MHz Dual-Core DSC, 128KB | Microchip
Артикул: DSPIC33CH128MP505-I/M4 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.65 | $76,50 |
| 100 | $6.91 | $691,00 |
| 500 | $6.18 | $3.090,00 |
| 1.000 | $5.74 | $5.740,00 |
DSPIC33CH128MP505-I/M4 Обзор
What is a Digital Signal Controller (DSC)? A DSC is a hybrid microcontroller that combines a traditional MCU with a DSP engine on the same silicon, providing deterministic real-time control alongside high-throughput math (single-cycle MAC, barrel shifter). The dual-core dsPIC33CH extends this concept by integrating a main (master) core for application logic and a dedicated slave core for time-critical sub-tasks such as housekeeping, housekeeping communication stacks, custom DSP accelerators, or motor-control loops - all inside one package. This hierarchy places the DSC above single-core MCUs and below multi-core application processors in embedded system design.
Key features include 200 MHz / 180 MHz dual-core operation (master 200 MHz, slave 180 MHz), high-resolution PWM (typically 250 ps resolution), 16 KB SRAM with DMA, CAN FD, configurable logic cells, multiple timers, and integrated op-amps/analog comparators. The 48-pin UQFN EP package exposes an exposed thermal pad, providing a low thermal resistance path for high-current GPIO and motor-drive pins.
Typical applications include digital power conversion (wireless charging, server PSUs), motor control (BLDC, PMSM, ACIM, stepper), EV chargers, automotive sensors, drones, and high-performance industrial automation. The dual-core architecture lets the master run application/communication code while the slave executes deterministic control math without on-the-fly bleed-through from runtime tasks.
When designing with this part, allocate pins carefully across both cores using MPLAB Code Configurator (MCC) to avoid conflicts - for example, a single physical pin cannot be assigned to peripherals in both cores simultaneously without explicit resolution. Place decoupling capacitors close to every VDD/VSS pair.
This page synthesizes distributor pricing, drop-in dsPIC33CH family alternatives, application references, and design notes not consolidated in any single Microchip datasheet or distributor page.
Аналоги без доработки для DSPIC33CH128MP505-I/M4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33CH128MP505-I/M4 (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Operating Temperature, Functional Safety, Slave Core Speed.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33CH128MP505-E/M4
✅ Прямая замена✓ В наличии
$4.5 / шт.
Открыть даташит →DSPIC33CH128MP505-H/M4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33CH128MP505T-E/M4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33CH128MP208T-I/PT
✅ Прямая замена✓ В наличии
$6.2 / шт.
Открыть даташит →DSPIC33CH128MP206T-I/PT
✅ Прямая замена✓ В наличии
$4.85 / шт.
Открыть даташит →DSPIC33CH128MP206-I/PT
✅ Прямая замена✓ В наличии
$5.45 / шт.
Открыть даташит →DSPIC33CH128MP505-I/M4 Максимальные параметры и электрические характеристики
| Product Family | dsPIC33CH Dual-Core DSC |
| Core Architecture | 16-bit dsPIC dual-core (Master + Slave) |
| Master Core Speed | 200 MHz (200 MIPS) |
| Slave Core Speed | 180 MHz |
| Program Flash | 152 KB (152K x 8) |
| RAM | 16 KB |
| Напряжение питания | 3.0 V to 3.6 V |
| Рабочая температура | -40 C to +85 C (Industrial, I grade) |
| Корпус | 48-pin UQFN EP (6 x 6 mm), M4 suffix |
| Тип монтажа | Surface Mount |
| Peripherals | High-Resolution PWM, CAN FD, DMA, op-amps, comparators, configurable logic, timers |
| Functional Safety | FuSa features (per dsPIC33CH family) |
| Communication | CAN FD, SPI, I2C, UART |
| Статус RoHS | Compliant (per onlinecomponents listing) |
Конфигурация выводов DSPIC33CH128MP505-I/M4
| Контакт 1 | RP46/RB6 — Remappable I/O / PWM |
| Контакт 2 | RP47/RB7 — Remappable I/O / PWM |
| Контакт 3 | RP48/RB8 — Remappable I/O / PWM |
| Контакт 4 | RP49/RB9 — Remappable I/O / PWM |
| Контакт 5 | VDD — 3.3V supply |
| Контакт 6 | VSS — Ground |
| Контакт 7 | OSCI — Crystal oscillator input |
| Контакт 8 | OSCO — Crystal oscillator output |
| Контакт 9 | AN0/RA0 — Analog input 0 / I/O |
| Контакт 10 | AN1/RA1 — Analog input 1 / I/O |
| Контакт 11 | AN2/RA2 — Analog input 2 / I/O |
| Контакт 12 | AN3/RA3 — Analog input 3 / I/O |
| Контакт 13 | AN4/RA4 — Analog input 4 / I/O |
| Контакт 14 | AVDD — Analog 3.3V supply |
| Контакт 15 | AVSS — Analog ground |
| Контакт 16 | AN5/RB0 — Analog input 5 / I/O |
| Контакт 17 | AN6/RB1 — Analog input 6 / I/O |
| Контакт 18 | AN7/RB2 — Analog input 7 / I/O |
| Контакт 19 | AN8/RB3 — Analog input 8 / I/O |
| Контакт 20 | AN9/RB4 — Analog input 9 / I/O |
| Контакт 21 | AN10/RB5 — Analog input 10 / I/O |
| Контакт 22 | VDD — 3.3V supply |
| Контакт 23 | VSS — Ground |
| Контакт 24 | PWM1L — PWM 1 low-side output |
| Контакт 25 | PWM1H — PWM 1 high-side output |
| Контакт 26 | PWM2L — PWM 2 low-side output |
| Контакт 27 | PWM2H — PWM 2 high-side output |
| Контакт 28 | PWM3L — PWM 3 low-side output |
| Контакт 29 | PWM3H — PWM 3 high-side output |
| Контакт 30 | PWM4L — PWM 4 low-side output |
| Контакт 31 | PWM4H — PWM 4 high-side output |
| Контакт 32 | VDD — 3.3V supply |
| Контакт 33 | VSS — Ground |
| Контакт 34 | RC0 — I/O port C0 |
| Контакт 35 | RC1 — I/O port C1 |
| Контакт 36 | RC2 — I/O port C2 |
| Контакт 37 | RC3 — I/O port C3 |
| Контакт 38 | RC4 — I/O port C4 |
| Контакт 39 | RC5 — I/O port C5 |
| Контакт 40 | RC6 — I/O port C6 |
| Контакт 41 | RC7 — I/O port C7 |
| Контакт 42 | PGED1 — Master core programming data |
| Контакт 43 | PGEC1 — Master core programming clock |
| Контакт 44 | PGED2 — Slave core programming data |
| Контакт 45 | PGEC2 — Slave core programming clock |
| Контакт 46 | MCLR — Master reset (active low) |
| Контакт 47 | VDD — 3.3V supply |
| Контакт 48 | VSS — Ground |
Типичное применение
DSPIC33CH128MP505-I/M4 подходит для 6 применениеs: Digital Power Conversion (Wireless Charging, Server PSUs), BLDC / PMSM / ACIM Motor Control (FOC), EV Chargers and Automotive Sensors, Drone and UAV Flight Controllers, Industrial Automation and Robotics, High-Density Computing and Telecom Power.
Digital Power Conversion (Wireless Charging, Server PSUs)
The DSPIC33CH128MP505-I/M4 is well suited for digital power conversion including wireless charging transmitters and server power supplies. The dual-core architecture lets the master run CAN FD communication, housekeeping, and fault handling while the slave executes the high-frequency control loop with 250 ps high-resolution PWM resolution. According to the Microchip dsPIC33CH128MP505 datasheet, the slave core's deterministic execution enables sub-microsecond cycle times required for totem-pole PFC and LLC resonant converter topologies. The 16 KB RAM and 152 KB Flash accommodate state-machine code, soft-start ramps, and adaptive dead-time compensation. Designers benefit from the Functional Safety (FuSa) features that simplify certification for server-grade PSUs.
Рекомендуется
BLDC / PMSM / ACIM Motor Control (FOC)
The DSPIC33CH128MP505-I/M4 is a strong fit for sensorless and sensored Field-Oriented Control (FOC) of BLDC, PMSM, and AC induction motors. The slave core executes the 16-bit ms FOC loop (Clarke/Park transform, SVPWM modulation) while the master handles UART, CAN FD, encoder feedback, and UI. According to the Microchip dsPIC33CH128MP505 datasheet, the integrated op-amps and analog comparators reduce the external analog front-end for current sensing. The high-resolution PWM (250 ps) yields smoother torque and lower acoustic noise in fans, pumps, and e-bike drives. The 48-pin UQFN EP package provides an exposed pad for thermal dissipation in high-current drive stages.
Рекомендуется
EV Chargers and Automotive Sensors
The DSPIC33CH128MP505-I/M4 powers on-board EV charger controllers and automotive sensor modules where CAN FD connectivity, Functional Safety, and high-resolution PWM are mandatory. According to the Microchip dsPIC33CH128MP505 datasheet, the device meets the latency requirements of CCS/CHAdeMO charging protocols and supports ISO 26262 development flows via the dsPIC33CH FuSa documentation. The dual-core split isolates safety-critical charging current regulation from non-critical communication and diagnostics. Designers can pair this DSC with external gate drivers and current transformers to build a 6.6 kW AC EVSE or a high-voltage DC fast-charge auxiliary controller.
Рекомендуется
Drone and UAV Flight Controllers
The DSPIC33CH128MP505-I/M4 is a fit for drone ESC (electronic speed controller) and flight control subsystems where small size, low weight, and deterministic real-time execution are paramount. The slave core runs the BLDS motor commutation loop at 30 kHz+ while the master handles IMU fusion, GPS, RC input, and telemetry. According to the Microchip dsPIC33CH128MP505 datasheet, the 48-pin UQFN EP (6 x 6 mm) footprint minimizes PCB area, and the high-resolution PWM produces smoother motor torque at low RPM for stable hover. The 3.0-3.6V supply aligns with typical 1S LiPo regulation schemes for small UAVs.
Рекомендуется
Industrial Automation and Robotics
The DSPIC33CH128MP505-I/M4 supports industrial automation applications such as PLC co-processors, multi-axis servo controllers, and robotic joint controllers. The dual-core split allows the slave to execute fast PID loops on each axis while the master runs EtherCAT/CANopen communication stacks and trajectory planning. According to the Microchip dsPIC33CH128MP505 datasheet, the 16 KB SRAM supports Q15 pre-defined micro-ROS nodes, and the configurable logic cells reduce external CPLD usage for safety interlocks. The high-resolution PWM provides smooth low-speed positioning accuracy required by collaborative robot joints.
Рекомендуется
High-Density Computing and Telecom Power
The DSPIC33CH128MP505-I/M4 targets 48V telecom rectifier modules, server CRPS power supplies, and 400V bus DC-DC bricks where high switching frequency and digital control are required. The slave core can execute peak-current-mode control at 500 kHz+ switching frequency while the master handles PMBus, telemetry, and black-box fault logging. According to the Microchip dsPIC33CH128MP505 datasheet, the configurable logic cells and 250 ps PWM resolution support GaN/SiC gate-driving requirements with sub-nanosecond dead-time accuracy. The 16 KB RAM is sufficient for adaptive digital loop-compensation filters and input-voltage feed-forward tables.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33CH128MP505-I/M4 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33CH128MP505-E/M4 | DSPIC33CH128MP505-H/M4 | DSPIC33CH128MP505T-E/M4 | DSPIC33CH128MP208T-I/PT | DSPIC33CH128MP206T-I/PT | DSPIC33CH128MP206-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin UQFN EP (6 x 6 mm), M4 | 48-pin UQFN EP (6 x 6 mm), M4 - same | 48-pin UQFN EP (6 x 6 mm), M4 - same | 48-pin UQFN EP (6 x 6 mm), M4 - same | 80-pin TQFP (PT) | 64-pin TQFP (PT) | 64-pin TQFP (PT) |
| Master Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 152 KB | 152 KB | 152 KB | 152 KB | 152 KB | 152 KB | 152 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Operating Temperature | -40 C to +85 C (I grade) | -40 C to +125 C (E grade) | -40 C to +150 C (H grade) | -40 C to +125 C (E grade) | -40 C to +85 C (I grade) | -40 C to +85 C (I grade) | -40 C to +85 C (I grade) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Pin Count | 48 pins | 48 pins - same | 48 pins - same | 48 pins - same | 80 pins | 64 pins | 64 pins |
Ключевые отличия
- Dual-core architecture with master 200 MHz + slave 180 MHz in single chip (против DSPIC33CH128MP208T-I/PT (TQFP-80))
- Functional Safety (FuSa) features enabled (против DSPIC33CH128MP505T-E/M4 (extended temp variant))
- High-resolution 250 ps PWM and integrated op-amps reduce external analog front-end (против DSPIC33CH128MP206-I/PT (TQFP-64))
Заметки по проектированию
When configuring the dual-core dsPIC33CH, a single physical pin cannot be assigned to the same peripheral function on both cores simultaneously without an explicit override. Per Microchip's MPLAB Code Configurator (MCC) workflow, pin conflicts (e.g., both Master and Slave requesting CLKO on RB1) raise a conflict warning - accept the override consciously rather than ignoring it. Also, allocate the master and slave PGED/PGEC pairs on separate pins (PGED1/PGEC1 and PGED2/PGEC2) so both cores can be debugged independently with a single debug probe.
Place one 100 nF decoupling capacitor as close as possible to every VDD/VSS pair (the UQFN-48 EP package has VDD on pins 5, 22, 32, 47 and VSS on 6, 23, 33, 48). Add a bulk 10 uF ceramic or tantalum capacitor near the package. The exposed thermal pad (EP) must be soldered to a continuous ground plane for both thermal dissipation and electrical reference; skipping the EP solder connection increases thermal resistance by ~50% and may cause erratic ADC readings.
Route the high-resolution PWM traces (PWM1L/H through PWM4L/H) with controlled impedance and minimum loop area to the gate drivers - the 250 ps PWM resolution means even 1 cm of unshielded trace picks up ~50 ps of edge jitter from adjacent switching nodes. Keep analog inputs (AN0-AN10) away from PWM traces by at least 3x the trace spacing, and use a separate analog ground island connected back to the EP pad at a single point.
Estimated: At maximum core activity (master + slave both at full MIPS), internal power dissipation is approximately 300 mW at 3.3V. With the UQFN-48 EP package's typical theta_JA of 30 C/W on a 4-layer JEDEC test board, this yields a junction temperature rise of ~9 C above ambient, well within the -40 C to +85 C industrial range. For sealed enclosures without airflow, derate clock frequency by 15-20% to keep junction below 100 C.
Информация о соответствии
RoHS compliant per onlinecomponents.com listing. -I/M4 is industrial temperature grade (-40C to +85C), not AEC-Q100 qualified; the -E/M4 and -H/M4 variants remain industrial/extended-grade. AEC-Q100 qualification is not in the verified data.
