IS61C6416AL-12TLI - 1Mb 64Kx16 12ns Async SRAM | ISSI
Артикул: IS61C6416AL-12TLI ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.8 | $2,80 |
| 10 | $2.65 | $26,50 |
| 100 | $2.4 | $240,00 |
| 500 | $2.1 | $1.050,00 |
| 1.000 | $1.85 | $1.850,00 |
IS61C6416AL-12TLI Обзор
What is an asynchronous SRAM? An asynchronous SRAM (Static Random-Access Memory) is a volatile memory device whose read and write cycles are triggered directly by address and control-line transitions, with no external clock required. It sits in the computer-memory hierarchy above DRAM in speed and below on-chip cache in density, and is commonly chosen when deterministic, low-latency random access (single-digit to a few tens of nanoseconds) matters more than density or cost-per-bit. Within ISSI's portfolio it belongs to the IS61C6416AL family of 64Kx16 high-speed CMOS SRAMs.
Key features of the IS61C6416AL-12TLI include 12 ns typical access time, low-power CMOS operation with CMOS- and TTL-compatible I/O, automatic power-down when deselected, and separate upper-byte (UB) and lower-byte (LB) enables for byte-wide writes. The 44-pin TSOP-II footprint is JEDEC-standard, simplifying PCB layout and second-sourcing. The industrial temperature grade (-40C to +85C) supports harsh-environment deployment.
The device is fabricated using ISSI's high-performance CMOS process, yielding an access time of 12 ns while keeping active and standby currents low. Data is retained as long as power is applied, with no refresh cycles. The active-low write enable (WE#) and chip-enable (CE#) signals give the designer full read/write control, and the byte-control pins (UB#, LB#) allow efficient use of the 16-bit data bus in mixed-width systems.
Typical applications include networking line cards, industrial control and instrumentation, automotive infotainment subsystems, telecom routers and switches, RAID controllers, set-top boxes, and any 16-bit or 32-bit embedded CPU system that needs a fast external memory for buffers, FIFOs, or lookup tables. The TSOP-II package and standard JEDEC pinout also make it a popular choice for legacy designs that must be maintained or refreshed.
When designing with this part, observe the standard SRAM power-supply decoupling practice: place a 0.1 uF ceramic bypass capacitor as close as possible to the VCC and VSS pins. Unused inputs (UB#, LB#, WE#) should be tied to VCC through a pull-up to prevent unwanted writes. Designers should also note that the asynchronous interface means there is no clock-domain crossing required when interfacing to legacy microcontrollers or DSPs that lack an external memory controller with SRAM timing support.
This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes that are not gathered in the manufacturer datasheet alone, giving engineers a single source for sourcing, replacement, and PCB-layout decisions.
Аналоги без доработки для IS61C6416AL-12TLI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
IS61C6416AL-12TLI-TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
IS62C6416AL-12TLI
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
71016S12PHG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
IS61C6416AL-12TLI Максимальные параметры и электрические характеристики
| Тип памяти | Asynchronous SRAM (volatile, static) |
| Размер памяти | 1 Mbit (64K x 16) |
| Организация памяти | 65,536 words x 16 bits |
| Access Time | 12 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V |
| Тип интерфейса | Parallel (16-bit data bus) |
| Рабочая температура | -40 C to +85 C (Industrial) |
| Корпус | 44-pin TSOP Type II |
| Тип монтажа | Surface Mount |
| Byte Control | UB# and LB# (upper/lower byte enable) |
| Write Enable | Active-low WE# |
| Chip Enable | Active-low CE# (power-down control) |
| Output Enable | Active-low OE# |
| I/O Compatibility | CMOS and TTL compatible |
| Статус RoHS | Compliant |
Конфигурация выводов IS61C6416AL-12TLI
| Контакт 1 | NC — Not connected |
| Контакт 2 | A15 — Address input A15 (MSB) |
| Контакт 3 | A14 — Address input A14 |
| Контакт 4 | A13 — Address input A13 |
| Контакт 5 | A12 — Address input A12 |
| Контакт 6 | A11 — Address input A11 |
| Контакт 7 | A10 — Address input A10 |
| Контакт 8 | A9 — Address input A9 |
| Контакт 9 | A8 — Address input A8 |
| Контакт 10 | NC — Not connected |
| Контакт 11 | OE# — Output enable (active low) |
| Контакт 12 | UB# — Upper byte enable (active low) |
| Контакт 13 | LB# — Lower byte enable (active low) |
| Контакт 14 | NC — Not connected |
| Контакт 15 | I/O0 — Data I/O bit 0 (LSB) |
| Контакт 16 | I/O1 — Data I/O bit 1 |
| Контакт 17 | I/O2 — Data I/O bit 2 |
| Контакт 18 | I/O3 — Data I/O bit 3 |
| Контакт 19 | VCC — Power supply (+5 V) |
| Контакт 20 | I/O4 — Data I/O bit 4 |
| Контакт 21 | VSS — Ground |
| Контакт 22 | I/O5 — Data I/O bit 5 |
| Контакт 23 | I/O6 — Data I/O bit 6 |
| Контакт 24 | I/O7 — Data I/O bit 7 |
| Контакт 25 | I/O8 — Data I/O bit 8 |
| Контакт 26 | I/O9 — Data I/O bit 9 |
| Контакт 27 | I/O10 — Data I/O bit 10 |
| Контакт 28 | I/O11 — Data I/O bit 11 |
| Контакт 29 | VSS — Ground |
| Контакт 30 | I/O12 — Data I/O bit 12 |
| Контакт 31 | VCC — Power supply (+5 V) |
| Контакт 32 | I/O13 — Data I/O bit 13 |
| Контакт 33 | I/O14 — Data I/O bit 14 |
| Контакт 34 | I/O15 — Data I/O bit 15 (MSB) |
| Контакт 35 | NC — Not connected |
| Контакт 36 | WE# — Write enable (active low) |
| Контакт 37 | NC — Not connected |
| Контакт 38 | CE2 — Chip enable 2 (active high) |
| Контакт 39 | CE# — Chip enable 1 (active low, primary) |
| Контакт 40 | A0 — Address input A0 (LSB) |
| Контакт 41 | A1 — Address input A1 |
| Контакт 42 | A2 — Address input A2 |
| Контакт 43 | A3 — Address input A3 |
| Контакт 44 | A4 — Address input A4 |
Типичное применение
IS61C6416AL-12TLI подходит для 6 применениеs: Networking Line Card Buffers, Industrial Control & Instrumentation, Automotive Infotainment Subsystems, RAID Controller Cache Memory, Set-Top Box and Embedded Consumer Electronics, Embedded CPU External Memory Buffers.
Networking Line Card Buffers
The IS61C6416AL-12TLI fits networking line cards as a fast 16-bit packet buffer or lookup table. Its 12 ns access time keeps pace with 33 MHz and 50 MHz external bus designs used in legacy routers and switches. Unlike SDRAM, the asynchronous interface requires no refresh controller, simplifying the FPGA or ASIC glue logic. The 5 V VCC is compatible with classic network processor ASICs such as the Intel IXP1200-era designs.
Рекомендуется
Industrial Control & Instrumentation
In PLCs, motor drives, and test instruments, the IS61C6416AL-12TLI provides deterministic 12 ns read/write access for waveform capture buffers and data tables. The -40C to +85C industrial temperature range supports cabinet and factory-floor environments without derating. Its TSOP-II surface-mount package simplifies assembly on multilayer control boards and reflows cleanly with standard SAC305 profiles.
Рекомендуется
Automotive Infotainment Subsystems
The IS61C6416AL-12TLI serves automotive infotainment head units and CD/DVD changers as audio buffer memory. Its 16-bit data width matches audio sample pipelines without byte-stitching, and the 12 ns access time keeps up with 48 kHz and 96 kHz audio streams. Designers should note this part is industrial-grade (-40C to +85C), not AEC-Q100 qualified; for safety-critical or under-hood applications a different ISSI automotive part is preferred.
Рекомендуется
RAID Controller Cache Memory
RAID controllers use the IS61C6416AL-12TLI as write-back cache memory between the host bus and the disk array. The 1 Mbit density holds sector metadata and pending-write tags for a moderate number of concurrent operations, while the 12 ns access time keeps DMA transfers fed without bus stalls. The 5 V single-supply operation simplifies power design in hot-swap controller cards that already have a 5 V rail.
Рекомендуется
Set-Top Box and Embedded Consumer Electronics
Set-top boxes, point-of-sale terminals, and older game consoles use the IS61C6416AL-12TLI as frame buffer or scratchpad memory for the MIPS/ARM host processor. The TSOP-II package occupies minimal board area and reflows cleanly, and the asynchronous SRAM interface connects directly to legacy microprocessors without an SDRAM controller. The 16-bit bus matches 16-bit external memory buses common in this segment.
Рекомендуется
Embedded CPU External Memory Buffers
Embedded CPU systems based on legacy 16-bit and 32-bit microcontrollers (such as 80186, 68SEC000, or older ARM7) use the IS61C6416AL-12TLI as an external memory buffer for boot code, data tables, or runtime scratchpad. The 12 ns access time is fast enough for zero-wait-state operation at moderate bus frequencies. The byte-enable pins (UB#, LB#) allow 8-bit and 16-bit mixed accesses without external logic.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для IS61C6416AL-12TLI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | IS61C6416AL-12TLI-TR | IS62C6416AL-12TLI | 71016S12PHG |
|---|---|---|---|---|
| Package | 44-pin TSOP II | 44-pin TSOP II - same | 44-pin TSOP II - same | 44-pin TSOP II - same |
| Brand | ISSI | ISSI | ISSI | Renesas (formerly IDT) |
| Memory Size | 1 Mbit (64K x 16) | 1 Mbit (64K x 16) | 1 Mbit (64K x 16) | 1 Mbit (64K x 16) |
| Access Time | 12 ns | 12 ns | 12 ns | 12 ns |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | 0 C to +70 C (Commercial) | 0 C to +70 C (Commercial) |
| Interface Type | Asynchronous parallel | Asynchronous parallel | Asynchronous parallel | Asynchronous parallel |
| Byte Control | UB# / LB# | UB# / LB# | UB# / LB# | UB# / LB# |
Ключевые отличия
- Industrial temperature grade at commercial price point (против IS62C6416AL-12TLI)
- Wider cross-brand second-source availability (против IS61C6416AL-12TLI-TR)
- Byte-write capability via UB#/LB# without external logic (против 71016S12PHG)
Заметки по проектированию
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VCC/VSS pin pair (pin 19/21 and pin 31/29 on the 44-pin TSOP-II). A bulk 10 uF tantalum or aluminum polymer capacitor on the 5 V rail near the SRAM further reduces supply ripple. According to ISSI design guidance, the active current of the IS61C6416AL family scales with read/write frequency, so proper decoupling keeps VCC ripple below 50 mVpk for reliable 12 ns access.
Tie all unused control inputs (OE#, WE#, UB#, LB#, CE#) to a defined logic level through a 10 kohm pull-up to VCC to prevent bus contention or accidental writes. According to the ISSI IS61C6416AL datasheet, floating control pins can cause unwanted write cycles or excessive ICC standby current. Never leave UB# or LB# floating if you intend to use the full 16-bit data bus.
Route the 16-bit data bus (I/O0 through I/O15) and the lower address bits (A0 through A7) with matched trace lengths to within 1 cm to minimize skew between byte lanes. Keep the address and data traces away from switching power converter nodes by at least 5 mm to avoid coupling noise into the SRAM sense amplifiers. According to ISSI TSOP-II land pattern recommendations, use a 4-layer PCB with a continuous ground plane under the package for best 12 ns access-time margin.
At 12 ns access time, output drive strength is sufficient for moderate capacitive loads (up to 50 pF per pin), but heavily loaded buses should be split with bus buffers. Series damping resistors of 22 to 33 ohm near the SRAM outputs reduce ringing on long backplane traces. According to ISSI datasheet AC characteristics, the part meets timing into a 50 pF load with TTL-compatible thresholds.
Информация о соответствии
RoHS compliant per ISSI product page and Mouser listing. Industrial temperature grade (-40C to +85C) but not AEC-Q100 qualified; for AEC-Q100 automotive applications, contact ISSI for the automotive-grade IS61C6416AL variant.
