Analog Devices

MAX232ECWE+T - 5V RS-232 Transceiver, 120kbps | Analog Devices

Артикул: MAX232ECWE+T ✓ Активен
4.5V to 5.5V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232ECWE+T Обзор

The Analog Devices MAX232ECWE+T is a dual RS-232 transceiver with two drivers and two receivers, 120kbps data-rate capability, ±15kV ESD protection, and a 16-pin SOIC package. It operates from a single +5V supply and integrates charge-pump circuitry to generate the positive and negative voltages required by RS-232 line drivers.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers connect modern digital systems to older, noise-tolerant serial ports. The MAX232ECWE+T is intended for EIA/TIA-232E and CCITT V.28 communication links operating from a single 5V rail.

The integrated charge pump eliminates the need for a separate negative supply, allowing the MAX232ECWE+T to operate from 4.5V to 5.5V. Its two transmit channels provide full-duplex serial communication, while two receive channels support simultaneous bidirectional data exchange. The ±15kV human-body-model ESD protection improves tolerance when users, cables, or external equipment connect to the communication port.

As a CMOS interface device, the MAX232ECWE+T combines low-power 5V operation with level translation between TTL-compatible circuitry and RS-232. Internal transmitter and receiver functions implement the voltage conversion required at the physical interface, while the charge-pump section supports the bipolar signal levels used by compliant RS-232 equipment. The 16-pin SOIC package supports conventional surface-mount assembly and standard board-level inspection.

Typical uses include industrial equipment serial ports, laboratory instrumentation, point-of-sale terminals, embedded control systems, and service-console connections. The device is especially useful where the host electronics have a 5V supply and the connected peripheral expects a physical RS-232 port rather than USB or a low-voltage differential interface. Cable protection and grounding remain important when connecting the transceiver to long or electrically noisy external cables.

For a new design, place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep logic-side traces away from RS-232 line outputs, provide a solid ground return, and select external protection appropriate to the cable environment. Review the device's operating-temperature grade and absolute-maximum limits before using it outside a commercial-temperature enclosure.

This page combines the verified MAX232ECWE+T interface specifications, same-package cross-reference options, application guidance, and a parameter comparison that helps engineers distinguish electrical, package, and grade differences before approving a substitution.

Аналоги без доработки для MAX232ECWE+T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX232ECWE+T (тот же форм-фактор и посадочное место) — отличается по Product Type, Package, ESD Protection, Interface Standard, Mounting Type.

Texas Instruments
Product Type: Dual RS-232 driver/receiver transceiver
ESD Protection: ±2 kV
Interface Standard: EIA-232 / V.28
Сравнить с MAX232ECWE+T →
Texas Instruments
Product Type: Dual RS-232 driver/receiver
Package: 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Сравнить с MAX232ECWE+T →
Analog Devices
Product Type: Dual RS-232 transceiver with integrated charge pump
Package: 16-pin narrow SOIC
ESD Protection: 15 kV
Сравнить с MAX232ECWE+T →
Analog Devices
Product Type: RS-232 transceiver (2 drivers and 2 receivers)
Package: 16-pin wide SOIC, 7.50 mm width
ESD Protection: ±15 kV HBM
Сравнить с MAX232ECWE+T →
Maxim Integrated
Product Type: RS-232 transceiver interface IC
Package: 16-pin wide SOIC
Сравнить с MAX232ECWE+T →

MAX232EEWE+T

✅ Прямая замена
Analog Devices
📦 16-SOIC
RS-232 transceiver (2 drivers and 2 receivers) · 2 channels · 2 channels · Full duplex · 5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E

Уточнить цену

Открыть даташит →

MAX232ECDWR

✅ Прямая замена
Texas Instruments
📦 16-SOIC
Dual RS-232 driver/receiver · 2 · 2 · 250 kbps · 4.5 V to 5.5 V · Single 5 V supply · IEC 61000-4-2 · 16-pin SOIC (DW), 0.295 inch / 7.50 mm width

Уточнить цену

Открыть даташит →

MAX232EESE+

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Уточнить цену

Открыть даташит →

MAX232EWE+T

✅ Прямая замена
Maxim Integrated
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers · 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 and V.24 · +5 V

Уточнить цену

Открыть даташит →

MAX232ECWE+T Характеристики

Product Type Dual RS-232 transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Duplex Mode Full duplex
Скорость передачи данных 120kbps
Supply Voltage Range 4.5V to 5.5V
Nominal Supply Voltage +5V
ESD Protection ±15kV HBM
Interface Standard EIA/TIA-232E
Interface Standard CCITT V.28
Корпус 16-pin SOIC
Тип монтажа Surface mount
Charge Pump Integrated

Руководство по цоколевке MAX232ECWE+T в корпусе 16-pin soic

Цоколевка для MAX232ECWE+T (корпус 16-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin soic для MAX232ECWE+T

Нет подробных данных о распиновке для MAX232ECWE+T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX232ECWE+T подходит для 6 применениеs: Industrial Serial Equipment Interface, Point-of-Sale Terminal Connection, Laboratory Instrument Control Port, Embedded Service Console, Security and Access-Control Head End, Data Acquisition and Control Module.

🏭

Industrial Serial Equipment Interface

The MAX232ECWE+T is appropriate for legacy industrial equipment that exposes a physical RS-232 port from a 5V controller. Its two transmitters and two receivers support full-duplex communication, while the 120kbps rating covers common serial-console and machine-control protocols. The integrated charge pump removes the need for a separate negative supply, simplifying the interface power architecture. Place the driver outputs and receiver inputs near the connector and use the device data sheet to select the charge-pump capacitors. The main engineering consideration is cable behavior: long industrial runs can pick up noise, so maintain a low-impedance ground return and evaluate external surge protection when the port is exposed to uncontrolled cabling.

🖥️

Point-of-Sale Terminal Connection

The MAX232ECWE+T provides a compact RS-232 link between a 5V embedded controller and a point-of-sale terminal. Full-duplex operation permits command requests and transaction responses to share the cable when the peripheral implements both directions. Its 120kbps data rate is suitable for many peripheral protocols, and ±15kV HBM protection adds resilience at a connector that users may service. Keep the logic interface and charge-pump components away from the exposed cable side of the board. Confirm the peripheral's RS-232 pinout and logic levels before wiring because DTE and DCE equipment may assign the same connector signals differently. The data-sheet input thresholds should also be checked if the cable is unusually long.

⚡

Laboratory Instrument Control Port

The MAX232ECWE+T can connect a laboratory controller or embedded test platform to an RS-232-equipped instrument. The dual transmitter and dual receiver arrangement supports bidirectional command and measurement traffic, while 120kbps is appropriate for many legacy instrument-control protocols. A single 5V rail simplifies integration with modern controller boards, and the integrated charge pump avoids a discrete negative-voltage supply. Route the RS-232 traces as a paired signal and ground path, keep them separate from sensitive analog inputs, and verify the instrument's handshake behavior. Instrument cables can be long and connect to noisy laboratory equipment, so grounding and connector-level protection deserve attention even though the transceiver includes ±15kV HBM ESD protection.

🔧

Embedded Service Console

The MAX232ECWE+T is useful for an embedded service or maintenance console because it provides standard RS-232 levels from a 5V system while preserving two full-duplex channels. The 120kbps ceiling matches common diagnostic protocols, and the SOIC package allows placement near a board-edge connector without requiring a through-hole interface. Route the two receive lines away from switching-power nodes and high-current return paths because the transmitter outputs can be several volts beyond logic levels. Use a common ground between the controller and connected equipment, and keep cable exposure away from sources of electromagnetic interference. If the service port must tolerate frequent plugging or severe industrial transients, add appropriate connector and surge-protection hardware.

🧩

Security and Access-Control Head End

The MAX232ECWE+T can provide the physical communication path between a 5V access-control head end and an RS-232 peripheral. Bidirectional channels allow the controller to exchange authorization or configuration data, while ±15kV HBM protection is valuable at an accessible connector. The 120kbps rate is more than adequate for typical configuration and status traffic. Place a common-mode choke or selected series damping network where cable-emitted transients are a concern, and verify that the peripheral uses conventional RS-232 rather than RS-485 electrical levels. Correct grounding and signal pairing are essential because RS-232 is a single-ended, unbalanced interface. The device's integrated charge pump also reduces system complexity compared with a discrete bipolar transmitter implementation.

📡

Data Acquisition and Control Module

The MAX232ECWE+T supports legacy RS-232 communication in a data-acquisition or process-control module. Two receivers can collect status or trigger information, and two transmitters can return commands or sampled data to an external controller. Its single 5V operation, integrated charge pump, and 120kbps full-duplex performance fit compact embedded control boards. The interface is most effective when the RS-232 lines are protected from the high-energy switching circuitry used by adjacent power stages. Separate logic and cable-side regions, maintain a continuous ground plane, and use controlled return paths for both receive channels. If the module must tolerate long cables or repeated electrical surges, specify external protection and validate the complete assembled channel rather than relying only on the transceiver's internal ESD rating.

What is the MAX232ECWE+T?
The MAX232ECWE+T is a dual, full-duplex RS-232 transceiver designed for serial data links that use a single +5V supply. According to the Maxim Integrated device documentation, it contains two transmitters and two receivers, supports 120kbps operation, and provides ±15kV human-body-model ESD protection. Its integrated charge-pump circuitry generates the positive and negative voltages needed by RS-232 drivers, while the 16-pin SOIC package supports conventional surface-mount assembly.
What is the operating voltage of MAX232ECWE+T?
The MAX232ECWE+T operates from a 4.5V to 5.5V supply, with +5V as the nominal operating condition. This single-rail capability is produced by an integrated charge-pump circuit, which allows the transmitters to generate the bipolar voltage levels required for RS-232 without a separate negative power supply. According to the Maxim Integrated MAX232E family documentation, the interface is designed for EIA/TIA-232E and CCITT V.28 communication.
Where can I download the MAX232ECWE+T datasheet PDF?
The MAX232ECWE+T datasheet is available through the MAX232E family documentation linked from the distributor product pages and the official MAX232E data-sheet entry. The document covers the charge-pump circuit, electrical characteristics, ESD ratings, pin descriptions, and typical interface applications. Use the manufacturer data sheet as the controlling document for pin connections, operating limits, capacitor selection, and PCB implementation.
Where can I find the MAX232ECWE+T pinout?
The MAX232ECWE+T pinout is shown in the pin-description table and package drawing in the Maxim Integrated MAX232E manufacturer data sheet. Because this 16-pin device includes dedicated charge-pump and interface connections, do not infer its pinout solely from a generic MAX232 board layout. Verify the physical package, exposed connections, capacitor locations, and signal names against the exact data sheet before fabrication.
Is MAX232ECWE+T suitable for full-duplex RS-232 communication?
Yes, the MAX232ECWE+T is suitable for full-duplex RS-232 communication because it contains two transmitters and two receivers. According to the product description, the device is a 2/2 full-duplex transceiver rated for 120kbps. This permits simultaneous bidirectional serial communication when the host, cable, and peripheral implement the corresponding receive and transmit connections correctly.
What ESD protection does MAX232ECWE+T provide?
The MAX232ECWE+T provides ±15kV human-body-model ESD protection on its RS-232 interface. The manufacturer describes it as a ±15kV ESD-protected, +5V RS-232 transceiver, making it more robust than an unprotected logic-level translation stage. ESD protection does not replace a properly designed cable, connector, and grounding arrangement, so external surge or lightning protection may still be required for long or industrial cables.
MAX232ECWE+T vs MAX232EWE+T - which is better for a 120kbps link?
The MAX232ECWE+T is the better choice when the design is specifically constrained to 120kbps and uses the C-grade operating range. A published comparison identifies MAX232EWE+T as supporting 200kbps, which is 67% above the MAX232ECWE+T's 120kbps rating and therefore falls outside the normal drop-in proximity threshold for this selection. Both use the same SO-16 footprint, but the data-rate and temperature-grade differences must be reviewed before substitution.
What is the difference between MAX232ECWE+T and MAX232EEWE+T?
The MAX232ECWE+T and MAX232EEWE+T are closely related 16-pin SOIC RS-232 transceivers, but their suffix codes indicate different device variants. Both provide integrated single-supply operation and ESD-protected RS-232 interfaces. Before using one in place of the other, compare the manufacturer data rates, operating-temperature grades, and ordering codes because a shared package does not guarantee identical environmental or electrical limits.
When should I choose MAX232ECWE+T instead of MAX232EWE+T?
Choose the MAX232ECWE+T when the interface is limited to 120kbps and the required environmental grade matches the device rather than the higher data-rate capability of MAX232EWE+T. MAX232EWE+T is rated for 200kbps according to a published comparison, so it can be preferable for a faster link. The selection should be based on the required baud rate, temperature range, qualification needs, and verified pin compatibility rather than package appearance alone.
Can MAX232EEWE+T replace MAX232ECWE+T?
The MAX232EEWE+T can be considered as a same-package replacement candidate because the published comparison identifies both devices as 16-pin SOIC RS-232 transceivers. However, final approval requires checking the two data sheets for data rate, temperature grade, pin functions, charge-pump capacitor values, and absolute-maximum ratings. Confirm those details on the manufacturer documentation before releasing the substitution to production.
What is the best drop-in replacement for MAX232ECWE+T?
The best drop-in replacement is the closest same-package variant whose data rate, operating-temperature grade, and pin functions match the MAX232ECWE+T. MAX232EEWE+T is a strong candidate for evaluation because both use a 16-pin SOIC package, while MAX232EWE+T differs by a higher 200kbps rating. A valid replacement should preserve the 120kbps interface requirement and all conditions relevant to the installed enclosure and cable environment.
Where can I buy MAX232ECWE+T and check its lead time?
Use the Request a Quote form on this page to request MAX232ECWE+T pricing, current inventory, minimum order quantity, and production lead time. The +T ordering suffix identifies a tape-and-reel shipping format, but the required reel quantity and current scheduling should be confirmed when the quotation is issued. Submit the target quantity and intended package marking so the manufacturing and logistics commitment can be matched accurately.
What is the price of MAX232ECWE+T?
The current commercial terms for MAX232ECWE+T are returned through the Request a Quote form on this page. The quote can reflect the requested quantity, reel format, availability, and shipment destination, which are more useful than a generic unit figure for production planning. No fixed price is embedded in this answer because commercial terms can change with quantity and market conditions.
Is MAX232ECWE+T in stock?
Current MAX232ECWE+T inventory status should be confirmed through the Request a Quote form on this page. Enter the required quantity, target reel or cut-tape configuration, and shipment country or postal code. The manufacturer and distributor listings identify the part as an orderable catalog component, but a project-specific stock confirmation is required before committing a build schedule.
What are the key specifications of MAX232ECWE+T that engineers should know?
The key MAX232ECWE+T specifications are a 4.5V to 5.5V supply range, 120kbps maximum data rate, two transmitters, two receivers, full-duplex operation, integrated charge-pump circuitry, ±15kV HBM ESD protection, and a 16-pin SOIC package. According to the Maxim Integrated family documentation, the drivers and receivers conform to EIA/TIA-232E and CCITT V.28 requirements, making the device suitable for 5V equipment with a physical RS-232 port.

Справочные инженерные данные для MAX232ECWE+T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX232ECWE+T when a legacy peripheral requires a conventional RS-232 port and the communication rate is no higher than 120kbps. Its single 5V supply, integrated charge pump, dual transmitter and receiver channels, and 16-pin SOIC package make it practical for compact industrial, laboratory, service-console, and embedded-control equipment. Evaluate MAX232EEWE+T or MAX232ECDWR when their exact electrical and temperature ratings better fit the enclosure, but verify every data-sheet condition before substitution. MAX232EWE+T is appropriate when 200kbps capability is desirable, although that higher rating does not make it electrically identical to the MAX232ECWE+T. For any candidate, confirm pin functions, temperature grade, supply range, ESD rating, charge-pump capacitance, and connector-level DTE or DCE assignments. This comparison avoids treating a shared package as proof that two variants are equivalent in every system condition.

Сравнение с аналогами

Параметр Этот товар MAX232EEWE+T MAX232ECDWR MAX232EESE+ MAX232EWE+T
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual RS-232 transceiver RS-232 interface IC Dual RS-232 transceiver Dual RS-232 transceiver RS-232 interface IC
Number of Drivers 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers
Number of Receivers 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers
Duplex Mode Full duplex Full duplex Full duplex Full duplex Full duplex
Interface Standards EIA/TIA-232E and CCITT V.28 RS-232 interface RS-232 interface RS-232 interface RS-232 interface

Ключевые отличия

  • Data rate matches a conventional 120kbps RS-232 interface (против MAX232EWE+T)
  • Single 5V implementation with integrated charge pump (против MAX232ECDWR)
  • Full-duplex interface with two transmit and two receive channels (против MAX232EEWE+T)
  • Integrated ±15kV HBM ESD protection (против MAX232EESE+)

Заметки по проектированию

Place the charge-pump capacitors close to their designated MAX232ECWE+T pins and use the exact capacitance and voltage rating specified in the manufacturer data sheet. Keep the capacitor loops compact because high-frequency charge-pump current circulates through these traces. Route RS-232 outputs toward the connector without passing beneath sensitive analog or receive-input traces, and provide a continuous ground reference between the transceiver and connector.

Separate the cable-side RS-232 region from switching regulators, relays, motor drivers, and high-current power paths. Although the receiver rejects some common-mode noise, it cannot compensate for excessive cable pickup. Keep the two receiver traces away from the driver outputs, use a solid uninterrupted ground plane, and route cable returns directly to the interface ground reference. These measures are particularly important when the external cable is long or the enclosure contains substantial power-conversion circuitry.

Do not assume that every 16-pin MAX232-family suffix is an automatic replacement. Compare data rate, temperature grade, receiver thresholds, charge-pump capacitor requirements, and exposed-pin details. The MAX232EWE+T is identified as a 200kbps device, while the MAX232ECWE+T is rated for 120kbps. Also verify DTE versus DCE signal assignments at the connector because the transceiver does not determine the cable's application-side pinout.

For cables longer than several metres, consider series damping or a cable-side protection network that is selected for the required data rate and impedance. The transceiver's ±15kV HBM ESD rating addresses electrostatic discharge, not every lightning, industrial surge, or prolonged overload condition. Validate the complete interface under the intended cable length, grounding arrangement, and electromagnetic environment so that protection components do not distort the RS-232 signal excessively.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is an industrial or commercial RS-232 interface IC rather than an automotive-qualified component. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer or distributor compliance records.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX232ECWE+T datasheet MAX232ECWE+T pinout MAX232ECWE+T datasheet pdf MAX232ECWE+T equivalent MAX232ECWE+T replacement MAX232ECWE+T cross reference MAX232ECWE+T vs MAX232EWE+T MAX232ECWE+T price MAX232ECWE+T stock Analog Devices MAX232ECWE+T MAX232ECWE+T 120kbps MAX232ECWE+T 16-SOIC MAX232ECWE+T RS-232 application MAX232ECWE+T ±15kV ESD MAX232ECWE+T charge pump capacitor

Связанные компоненты & термины

Analog Devices Maxim Integrated MAX232ECWE+T MAX232EEWE+T MAX232ECDWR MAX232EESE+ MAX232EWE+T RS-232 transceiver interface IC CMOS EIA/TIA-232E CCITT V.28 charge pump 120kbps 4.5V to 5.5V ±15kV HBM ESD 16-pin SOIC SOIC package surface-mount full duplex RS-232 industrial automation laboratory instrumentation point-of-sale terminal embedded control system
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ