BTH60801EPLXUMA1 vs BTS70402EPGXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTH60801EPLXUMA1 sa pamamagitan ng Infineon at BTS70402EPGXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTH60801EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 4 |
| Topolohiya | High-Side N-Channel MOSFET with Charge Pump | — |
| On-State Resistance (RDS(on)) | 80 mΩ (typical) | — |
| Continuous Load Current | 2.5 A | — |
| Operating Voltage Range | 4 V to 54 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Nominal Board Net | 48 V (PROFET+ 48V family) | — |
| Current Limitation | Adjustable | — |
| Diagnostic Output | Current Sense (IS) pin | — |
| Input Logic | Active High and Active Low | — |
| Protection Features | Overtemperature, Overvoltage, Undervoltage, Short Circuit | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Packhaging | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Hanay ng Temperature na Operasyon | -40 °C to +150 °C (Tj) | -40 °C to +150 °C junction |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Tindminan RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Output Kumpigurasyon | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |