BTH60801EPLXUMA1 vs BTS70402EPGXUMA1 比較
詳細並排比較 BTH60801EPLXUMA1 由 Infineon 與 BTS70402EPGXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTH60801EPLXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 4 |
| 拓撲 | High-Side N-Channel MOSFET with Charge Pump | — |
| On-State Resistance (RDS(on)) | 80 mΩ (typical) | — |
| Continuous Load Current | 2.5 A | — |
| Operating Voltage Range | 4 V to 54 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Nominal Board Net | 48 V (PROFET+ 48V family) | — |
| Current Limitation | Adjustable | — |
| Diagnostic Output | Current Sense (IS) pin | — |
| Input Logic | Active High and Active Low | — |
| Protection Features | Overtemperature, Overvoltage, Undervoltage, Short Circuit | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| 封裝 | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| 工作溫度範圍 | -40 °C to +150 °C (Tj) | -40 °C to +150 °C junction |
| 安裝類型 | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| RoHS 狀態 | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| 功能 | — | Smart High-Side Power Switch |
| 輸出配置 | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |