MCZ33742EGR2 vs MCZ33742SEG Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MCZ33742EGR2 sa pamamagitan ng NXP Semiconductors at MCZ33742SEG sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP
MCZ33742EGR2 ✓ NakahandaNXP Semiconductors
MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors
MCZ33742SEG ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MCZ33742EGR2 | MCZ33742SEG |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Voltage Regulators | Power Management |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | System Basis Chip (SBC) with HS-CAN Transceiver | — |
| Manufacturer | Freescale / NXP Semiconductors | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V | — |
| Kuru-kuryente ng Pagbibigay | 42 mA (typical operating) | — |
| CAN Data Rate | 1 Mbps (High-Speed CAN 2.0b) | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) |
| Supported Bus Voltages | 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal) | — |
| Low-Power Modes | Sleep / Standby / Stop | — |
| Control Interface | SPI | — |
| Integrated Functions | 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator | — |
| Packhaging | 28-SOIC Wide Body (0.295 inch, 7.50 mm width) | 28-SOIC (0.295" / 7.50 mm width) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | Tube |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Compliance / Standard | CAN 2.0b compliant; ISO 11898-2/5 physical layer | — |
| Level ng MSL | [DATA_NEEDED: MSL rating] | — |
| Tindminan RoHS | Compliant (NXP product family standard) | Compliant |
| Fungsi | — | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO |
| Supply Voltage (VCC) | — | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) |
| Supply Current (typ) | — | 42 mA |
| SPI Control Frequency | — | up to 4.0 MHz |
| On-board LDO Output Voltage | — | 5.0 V (fixed) |
| LDO Current Limit | — | Yes (with current limiting) |
| Overtemperature Prewarning | — | Yes |
| Reset Output | — | Yes (LDO output monitoring & reset) |
| Output Drive Type | — | High-side drive with sense input |
| Bus Diagnostic | — | TXD dominant timeout, bus-fault detection |