MCZ33742EGR2 vs MCZ33742SEG Karşılaştırma

Ayrıntılı yan yana karşılaştırma MCZ33742EGR2 tarafından NXP Semiconductors ve MCZ33742SEG tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

NXP Semiconductors
MCZ33742EGR2 MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP

MCZ33742EGR2 ✓ Aktif
NXP Semiconductors
MCZ33742SEG MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors

MCZ33742SEG ✓ Aktif

Özellik Karşılaştırması

Parametre MCZ33742EGR2 MCZ33742SEG
Marka NXP Semiconductors NXP Semiconductors
Kategori Voltage Regulators Power Management
Yaşam Döngüsü Durumu Aktif Aktif
Product Type System Basis Chip (SBC) with HS-CAN Transceiver —
Manufacturer Freescale / NXP Semiconductors —
Supply Voltage (VBAT) 5.5 V to 18 V —
Besleme Akımı 42 mA (typical operating) —
CAN Data Rate 1 Mbps (High-Speed CAN 2.0b) 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5)
Supported Bus Voltages 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal) —
Low-Power Modes Sleep / Standby / Stop —
Control Interface SPI —
Integrated Functions 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator —
Paket 28-SOIC Wide Body (0.295 inch, 7.50 mm width) 28-SOIC (0.295" / 7.50 mm width)
Montaj Türü Surface Mount Surface Mount
Packaging Tape & Reel (TR) Tube
İşletim Sıcaklığı [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Compliance / Standard CAN 2.0b compliant; ISO 11898-2/5 physical layer —
MSL Seviyesi [DATA_NEEDED: MSL rating] —
RoHS Durumu Compliant (NXP product family standard) Compliant
Fonksiyon — System Basis Chip with HS-CAN Transceiver & 5.0 V LDO
Supply Voltage (VCC) — 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated)
Supply Current (typ) — 42 mA
SPI Control Frequency — up to 4.0 MHz
On-board LDO Output Voltage — 5.0 V (fixed)
LDO Current Limit — Yes (with current limiting)
Overtemperature Prewarning — Yes
Reset Output — Yes (LDO output monitoring & reset)
Output Drive Type — High-side drive with sense input
Bus Diagnostic — TXD dominant timeout, bus-fault detection

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin