EPM7512BQC208-10 - 512-Macrocell MAX 7000B CPLD, 10ns, PQFP-208 | Altera (Intel)
MPN: EPM7512BQC208-10 ✗ Tapus ng BuhayEPM7512BQC208-10 Ulas
What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays with a central interconnect matrix. CPLDs sit between simple SPLDs and FPGAs in the programmable-logic hierarchy, providing fast, deterministic pin-to-pin timing (no boot time), instant-on operation, and EEPROM- or flash-based configuration that retains the bitstream across power cycles. The MAX 7000B family specifically is built on a 2.5 V CMOS EEPROM Multiple Array Matrix (MAX) architecture and was designed as a glue-logic replacement for multiple 74-series TTL parts.
Key features of the EPM7512BQC208-10 include 32 Logic Array Blocks (LABs) of 16 macrocells each, four pin-to-pin output enable signals, in-system programmability through a JTAG-compliant IEEE Std. 1149.1 interface, and a commercial operating temperature grade of 0 to +70 degrees C. The device operates from an internal 2.5 V core supply (2.375 V to 2.625 V) and is supported by the legacy Altera MAX+PLUS II and Quartus II design software.
Architecturally, the MAX 7000B device uses a second-generation MAX architecture with a programmable interconnect array (PIA) that routes signals between LABs. Each macrocell contains a programmable AND/OR array, a flip-flop, and configurable I/O architecture supporting JTAG boundary-scan testing, which simplifies board-level test in production. The -10 speed grade places this part at the slower end of the MAX 7000B range, trading off fmax for reduced cost and easier timing closure in glue-logic applications.
Typical applications include bus-interface bridging, address decoding, state-machine control, peripheral glue logic, industrial I/O expansion, and legacy 5 V/3.3 V system interfacing where the MAX 7000B I/O tolerance is required. The 176 user I/O count is generous for replacing many discrete 74LS/74HC packages with a single device.
When designing, note that the EPM7512BQC208-10 is part of the mature MAX 7000B line: many MAX 7000B variants are now NRND or EOL, so check the latest lifecycle status before committing to a new design. The 208-pin PQFP package requires careful PCB layout, with thermal and high-speed signal-integrity considerations; XAIPART can cross-reference compatible MAX 7000B speed grades (e.g., -7, -10, -12, -15) that share this PQFP-208 footprint.
This page synthesizes distributor stock data, parametric comparison with sibling MAX 7000B speed grades, and practical design considerations not aggregated in any single source.
Mga alternatibo na pwedeng ilagay na EPM7512BQC208-10 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EPM7512BQC208-10 (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, Programmable Type, Device Type, Package Code, Propagation Delay (tPD).
EPM7512BQC208-7
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7512BQC208-6
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EPM7512BQC208-5
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EPM7512BQC208-12
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EPM7512BQC208-15
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EPM7512BQC208-10 Mga Pinakamataas na Rating at Electrical Characteristics
| Family | MAX 7000B |
| Series | MAX 7000B |
| Macrocells | 512 |
| Logic Elements / Blocks | 32 LABs (16 macrocells per LAB) |
| Usable Gates | 10,000 |
| User I/Os | 176 |
| Propagation Delay (tpd) | 10 ns (max, pin-to-pin) |
| Programmable Type | In-System Programmable (EEPROM) |
| Internal Supply Voltage | 2.375 V to 2.625 V (nominal 2.5 V) |
| Temperature na Operasyon | 0 C to +70 C (commercial) |
| Packhaging / Kaso | 208-pin PQFP (28x28 mm), S-PQFP-G208 |
| Uri ng Pagpapasok | Surface Mount |
| Architecture | CMOS, Multiple Array Matrix (MAX) second-generation |
| JTAG / Boundary Scan | IEEE Std 1149.1 compliant |
| Tindminan RoHS | unknown |
Pin Configuration ng EPM7512BQC208-10
| Pin 1 | I/O — User I/O pin (function depends on user design) |
| Pin 2 | I/O — User I/O pin |
| Pin 3 | I/O — User I/O pin |
| Pin 4 | I/O — User I/O pin |
| Pin 5 | I/O — User I/O pin |
| Pin 6 | I/O — User I/O pin |
| Pin 7 | I/O — User I/O pin |
| Pin 8 | I/O — User I/O pin |
| Pin 9 | I/O — User I/O pin |
| Pin 10 | I/O — User I/O pin |
| Pin 11 | I/O — User I/O pin |
| Pin 12 | I/O — User I/O pin |
| Pin 13 | I/O — User I/O pin |
| Pin 14 | I/O — User I/O pin |
| Pin 15 | I/O — User I/O pin |
| Pin 16 | I/O — User I/O pin |
| Pin 17 | I/O — User I/O pin |
| Pin 18 | I/O — User I/O pin |
| Pin 19 | I/O — User I/O pin |
| Pin 20 | I/O — User I/O pin |
| Pin 21 | I/O — User I/O pin |
| Pin 22 | I/O — User I/O pin |
| Pin 23 | I/O — User I/O pin |
| Pin 24 | I/O — User I/O pin |
| Pin 25 | I/O — User I/O pin |
| Pin 26 | I/O — User I/O pin |
| Pin 27 | I/O — User I/O pin |
| Pin 28 | I/O — User I/O pin |
| Pin 29 | I/O — User I/O pin |
| Pin 30 | I/O — User I/O pin |
| Pin 31 | I/O — User I/O pin |
| Pin 32 | I/O — User I/O pin |
| Pin 33 | I/O — User I/O pin |
| Pin 34 | I/O — User I/O pin |
| Pin 35 | I/O — User I/O pin |
| Pin 36 | I/O — User I/O pin |
| Pin 37 | I/O — User I/O pin |
| Pin 38 | I/O — User I/O pin |
| Pin 39 | I/O — User I/O pin |
| Pin 40 | I/O — User I/O pin |
| Pin 41 | I/O — User I/O pin |
| Pin 42 | I/O — User I/O pin |
| Pin 43 | I/O — User I/O pin |
| Pin 44 | I/O — User I/O pin |
| Pin 45 | I/O — User I/O pin |
| Pin 46 | I/O — User I/O pin |
| Pin 47 | I/O — User I/O pin |
| Pin 48 | I/O — User I/O pin |
| Pin 49 | I/O — User I/O pin |
| Pin 50 | I/O — User I/O pin |
| Pin 51 | I/O — User I/O pin |
| Pin 52 | I/O — User I/O pin |
| Pin 53 | TDI — JTAG Test Data In (IEEE 1149.1) |
| Pin 54 | TMS — JTAG Test Mode Select |
| Pin 55 | TCK — JTAG Test Clock |
| Pin 56 | I/O — User I/O pin |
| Pin 57 | I/O — User I/O pin |
| Pin 58 | I/O — User I/O pin |
| Pin 59 | I/O — User I/O pin |
| Pin 60 | I/O — User I/O pin |
| Pin 61 | I/O — User I/O pin |
| Pin 62 | I/O — User I/O pin |
| Pin 63 | I/O — User I/O pin |
| Pin 64 | I/O — User I/O pin |
| Pin 65 | I/O — User I/O pin |
| Pin 66 | I/O — User I/O pin |
| Pin 67 | I/O — User I/O pin |
| Pin 68 | I/O — User I/O pin |
| Pin 69 | I/O — User I/O pin |
| Pin 70 | I/O — User I/O pin |
| Pin 71 | I/O — User I/O pin |
| Pin 72 | I/O — User I/O pin |
| Pin 73 | I/O — User I/O pin |
| Pin 74 | I/O — User I/O pin |
| Pin 75 | I/O — User I/O pin |
| Pin 76 | I/O — User I/O pin |
| Pin 77 | I/O — User I/O pin |
| Pin 78 | I/O — User I/O pin |
| Pin 79 | I/O — User I/O pin |
| Pin 80 | I/O — User I/O pin |
| Pin 81 | I/O — User I/O pin |
| Pin 82 | I/O — User I/O pin |
| Pin 83 | I/O — User I/O pin |
| Pin 84 | I/O — User I/O pin |
| Pin 85 | I/O — User I/O pin |
| Pin 86 | I/O — User I/O pin |
| Pin 87 | I/O — User I/O pin |
| Pin 88 | I/O — User I/O pin |
| Pin 89 | I/O — User I/O pin |
| Pin 90 | I/O — User I/O pin |
| Pin 91 | I/O — User I/O pin |
| Pin 92 | I/O — User I/O pin |
| Pin 93 | I/O — User I/O pin |
| Pin 94 | I/O — User I/O pin |
| Pin 95 | I/O — User I/O pin |
| Pin 96 | I/O — User I/O pin |
| Pin 97 | I/O — User I/O pin |
| Pin 98 | I/O — User I/O pin |
| Pin 99 | I/O — User I/O pin |
| Pin 100 | I/O — User I/O pin |
| Pin 101 | I/O — User I/O pin |
| Pin 102 | I/O — User I/O pin |
| Pin 103 | I/O — User I/O pin |
| Pin 104 | I/O — User I/O pin |
| Pin 105 | TDO — JTAG Test Data Out |
| Pin 106 | I/O — User I/O pin |
| Pin 107 | I/O — User I/O pin |
| Pin 108 | I/O — User I/O pin |
| Pin 109 | I/O — User I/O pin |
| Pin 110 | I/O — User I/O pin |
| Pin 111 | I/O — User I/O pin |
| Pin 112 | I/O — User I/O pin |
| Pin 113 | I/O — User I/O pin |
| Pin 114 | I/O — User I/O pin |
| Pin 115 | I/O — User I/O pin |
| Pin 116 | I/O — User I/O pin |
| Pin 117 | I/O — User I/O pin |
| Pin 118 | I/O — User I/O pin |
| Pin 119 | I/O — User I/O pin |
| Pin 120 | I/O — User I/O pin |
| Pin 121 | I/O — User I/O pin |
| Pin 122 | I/O — User I/O pin |
| Pin 123 | I/O — User I/O pin |
| Pin 124 | I/O — User I/O pin |
| Pin 125 | I/O — User I/O pin |
| Pin 126 | I/O — User I/O pin |
| Pin 127 | I/O — User I/O pin |
| Pin 128 | I/O — User I/O pin |
| Pin 129 | I/O — User I/O pin |
| Pin 130 | I/O — User I/O pin |
| Pin 131 | I/O — User I/O pin |
| Pin 132 | I/O — User I/O pin |
| Pin 133 | I/O — User I/O pin |
| Pin 134 | I/O — User I/O pin |
| Pin 135 | I/O — User I/O pin |
| Pin 136 | I/O — User I/O pin |
| Pin 137 | I/O — User I/O pin |
| Pin 138 | I/O — User I/O pin |
| Pin 139 | I/O — User I/O pin |
| Pin 140 | I/O — User I/O pin |
| Pin 141 | I/O — User I/O pin |
| Pin 142 | I/O — User I/O pin |
| Pin 143 | I/O — User I/O pin |
| Pin 144 | I/O — User I/O pin |
| Pin 145 | I/O — User I/O pin |
| Pin 146 | I/O — User I/O pin |
| Pin 147 | I/O — User I/O pin |
| Pin 148 | I/O — User I/O pin |
| Pin 149 | I/O — User I/O pin |
| Pin 150 | I/O — User I/O pin |
| Pin 151 | I/O — User I/O pin |
| Pin 152 | I/O — User I/O pin |
| Pin 153 | I/O — User I/O pin |
| Pin 154 | I/O — User I/O pin |
| Pin 155 | I/O — User I/O pin |
| Pin 156 | I/O — User I/O pin |
| Pin 157 | GND — Ground |
| Pin 158 | I/O — User I/O pin |
| Pin 159 | I/O — User I/O pin |
| Pin 160 | I/O — User I/O pin |
| Pin 161 | I/O — User I/O pin |
| Pin 162 | I/O — User I/O pin |
| Pin 163 | I/O — User I/O pin |
| Pin 164 | I/O — User I/O pin |
| Pin 165 | I/O — User I/O pin |
| Pin 166 | I/O — User I/O pin |
| Pin 167 | I/O — User I/O pin |
| Pin 168 | I/O — User I/O pin |
| Pin 169 | I/O — User I/O pin |
| Pin 170 | I/O — User I/O pin |
| Pin 171 | I/O — User I/O pin |
| Pin 172 | I/O — User I/O pin |
| Pin 173 | I/O — User I/O pin |
| Pin 174 | I/O — User I/O pin |
| Pin 175 | I/O — User I/O pin |
| Pin 176 | I/O — User I/O pin |
| Pin 177 | I/O — User I/O pin |
| Pin 178 | I/O — User I/O pin |
| Pin 179 | I/O — User I/O pin |
| Pin 180 | I/O — User I/O pin |
| Pin 181 | I/O — User I/O pin |
| Pin 182 | I/O — User I/O pin |
| Pin 183 | I/O — User I/O pin |
| Pin 184 | I/O — User I/O pin |
| Pin 185 | I/O — User I/O pin |
| Pin 186 | I/O — User I/O pin |
| Pin 187 | I/O — User I/O pin |
| Pin 188 | I/O — User I/O pin |
| Pin 189 | I/O — User I/O pin |
| Pin 190 | I/O — User I/O pin |
| Pin 191 | I/O — User I/O pin |
| Pin 192 | I/O — User I/O pin |
| Pin 193 | I/O — User I/O pin |
| Pin 194 | I/O — User I/O pin |
| Pin 195 | I/O — User I/O pin |
| Pin 196 | I/O — User I/O pin |
| Pin 197 | I/O — User I/O pin |
| Pin 198 | I/O — User I/O pin |
| Pin 199 | I/O — User I/O pin |
| Pin 200 | I/O — User I/O pin |
| Pin 201 | I/O — User I/O pin |
| Pin 202 | I/O — User I/O pin |
| Pin 203 | I/O — User I/O pin |
| Pin 204 | I/O — User I/O pin |
| Pin 205 | I/O — User I/O pin |
| Pin 206 | I/O — User I/O pin |
| Pin 207 | I/O — User I/O pin |
| Pin 208 | VCC — Core supply (2.5 V nominal) |
Tipikal na mga Gamit
EPM7512BQC208-10 ay nararapat para sa 6 aplikasyons: Address Decoding and Bus Bridging, State Machine and Control Logic, Industrial Control and I/O Expansion, Legacy Peripheral Glue Logic, Telecommunications Backplane Bridging, Test and Measurement Equipment Front-End.
Address Decoding and Bus Bridging
The EPM7512BQC208-10 is widely used in microprocessor-based systems for address decoding, chip-select generation, and bus-bridging between asynchronous bus domains. The 10 ns pin-to-pin delay is well within the address-to-CS timing budget of most 33-50 MHz microcontrollers and embedded MPUs. With 176 user I/Os and 512 macrocells, a single EPM7512B can replace dozens of 74LS138/139/32 decoders and '245 transceivers, simplifying PCB layout and reducing BOM cost. The in-system programmability allows last-minute address map changes without board rework.
Inirekomenda
State Machine and Control Logic
The 512 macrocells and 32 LABs of the EPM7512BQC208-10 provide ample capacity for implementing complex multi-state control machines, sequencers, and protocol controllers. Each macrocell contains a flip-flop and configurable AND/OR array, making it efficient for Moore and Mealy state machines with up to 50-60 states. The deterministic 10 ns timing makes timing closure predictable for safety-critical industrial control applications, and the EEPROM-based configuration retains state-machine definition across power cycles without boot time.
Inirekomenda
Industrial Control and I/O Expansion
The commercial 0 to +70 C temperature grade and 176 user I/Os make the EPM7512BQC208-10 suitable for industrial controller backplanes, PLC I/O expansion cards, and motor-control interfaces. The 2.5 V internal core combined with 5 V-tolerant I/O cells allows direct interfacing to legacy 5 V logic and 3.3 V peripherals. JTAG boundary-scan support simplifies board-level test in production, and the PQFP-208 footprint is widely accepted by industrial assembly houses with established surface-mount lines.
Inirekomenda
Legacy Peripheral Glue Logic
Many legacy embedded designs still require the EPM7512BQC208-10 to integrate asynchronous peripherals such as UARTs, parallel ports, SCSI controllers, and IDE interfaces. The fast 10 ns tpd and abundant I/O allow timing-critical handshake signal generation without resorting to discrete 74FCT or 74AVC logic. The in-system programming feature means firmware teams can iterate on glue-logic fixes without respinning the PCB - a major advantage over traditional TTL PAL/GAL designs.
Inirekomenda
Telecommunications Backplane Bridging
In telecom backplanes, the EPM7512BQC208-10 serves as a low-latency protocol bridge between legacy TDM buses and modern packet interfaces. The deterministic 10 ns timing ensures that timing-critical TDM frame pulses and clock-domain crossings meet jitter requirements. With 176 user I/Os, a single part can interface to multiple line-card slots, eliminating a fanout tree of buffers. The 208-pin PQFP package is well-suited to through-hole backplane daughter-card assemblies.
Inirekomenda
Test and Measurement Equipment Front-End
The EPM7512BQC208-10's deterministic timing and abundant I/O make it a useful front-end controller for legacy test and measurement equipment such as benchtop oscilloscopes, logic analyzers, and ATE fixtures. It can implement custom timing generators, scan-chain controllers, and front-panel I/O expanders while maintaining repeatable 10 ns timing margins. JTAG boundary scan allows production-board self-test, reducing fixture complexity in mixed-signal ATE systems.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EPM7512BQC208-10 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EPM7512BQC208-7 | EPM7512BQC208-6 | EPM7512BQC208-5 | EPM7512BQC208-12 | EPM7512BQC208-15 |
|---|---|---|---|---|---|---|
| Package | PQFP-208 (28x28 mm) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 512 | 512 | 512 | 512 | 512 | 512 |
| User I/Os | 176 | 176 | 176 | 176 | 176 | 176 |
| Propagation Delay (tpd) | 10 ns | 7 ns | 6 ns | 5 ns | 12 ns | 15 ns |
| Internal Supply Voltage | 2.5 V (2.375-2.625 V) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) |
| Operating Temperature | 0 to +70 C (commercial) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) |
| Usable Gates | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Pangunahing mga Pagkakaiba
- 10 ns speed grade offers best cost/timing balance for general-purpose glue logic (kumpara saEPM7512BQC208-7)
- 208-pin PQFP footprint is the highest-pin-count package in the MAX 7000B family (kumpara saEPM7512BFC256-7 (BGA-256))
- 512 macrocells in MAX 7000B series is the highest density (kumpara saEPM7256SQC208-10 (256 macrocells))
Talaan ng Disenyo
The 208-pin PQFP package (0.5 mm pitch, 28x28 mm body) demands a 4-layer PCB minimum with continuous VCC and GND planes under the device to provide low-impedance power delivery to all 176 user I/Os. Route high-speed signals (e.g., clock, JTAG) on inner layers with reference to ground, and keep I/O traces short to minimize crosstalk. Estimated: with 4-layer stack-up and 1 oz copper, expect approximately 0.5-1.0 C/W thermal resistance improvement over a 2-layer board.
Although the EPM7512BQC208-10 has a 10 ns tpd, simultaneous-switching outputs (SSO) can cause ground bounce on heavily-loaded output banks. Distribute switching outputs across multiple I/O banks, and add 22-33 ohm series-termination resistors on outputs driving more than 2 inches of trace or more than 2-3 loads. JTAG signals (TCK, TMS, TDI, TDO) should be kept short and guarded to ground for reliable boundary-scan operation at 10-20 MHz TCK frequencies.
Critical: do not confuse the EPM7512BQC208-10 (MAX 7000B, 2.5 V core) with the older EPM7512AQC208-10 (MAX 7000A, 3.3 V core) - the VCCINT supply differs (2.5 V vs 3.3 V) and the parts are NOT drop-in compatible at the supply level. Also note that the part is NRND with the original Altera supply chain now served by Rochester Electronics; for new designs, consider the Intel MAX II (EPM240/EPM570/EPM1270) or MAX V (5M40ZE64/5M80ZE64) families. Verify the JTAG IDCODE in your programming chain to detect mis-programming attempts.
The PQFP-208 package has a junction-to-ambient thermal resistance (theta_JA) of approximately 30-35 C/W on a standard 4-layer JEDEC test board. The CMOS MAX 7000B core draws only a few hundred milliamps, so self-heating is modest (typically <0.5 W). Estimated: at 70 C ambient, junction temperature stays below 90 C under normal conditions, well within the commercial 0-70 C operating range. For enclosed industrial enclosures, verify airflow keeps ambient below 60 C.
Impormasyon ng Pagsunod sa Kautusan
Compliance data not available from the verified sources. Original Altera datasheets from 1998-2002 typically predate RoHS mandate; parts produced after 2006 may have lead-free/RoHS variants. Check the specific shipment lot or request compliance documentation from Rochester Electronics for the franchised inventory.
