EPM7512BQC208-10 - 512-Macrocell MAX 7000B CPLD, 10ns, PQFP-208 | Altera (Intel)
MPN: EPM7512BQC208-10 ✗ Cuối đờiEPM7512BQC208-10 Tóm tắt
What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays with a central interconnect matrix. CPLDs sit between simple SPLDs and FPGAs in the programmable-logic hierarchy, providing fast, deterministic pin-to-pin timing (no boot time), instant-on operation, and EEPROM- or flash-based configuration that retains the bitstream across power cycles. The MAX 7000B family specifically is built on a 2.5 V CMOS EEPROM Multiple Array Matrix (MAX) architecture and was designed as a glue-logic replacement for multiple 74-series TTL parts.
Key features of the EPM7512BQC208-10 include 32 Logic Array Blocks (LABs) of 16 macrocells each, four pin-to-pin output enable signals, in-system programmability through a JTAG-compliant IEEE Std. 1149.1 interface, and a commercial operating temperature grade of 0 to +70 degrees C. The device operates from an internal 2.5 V core supply (2.375 V to 2.625 V) and is supported by the legacy Altera MAX+PLUS II and Quartus II design software.
Architecturally, the MAX 7000B device uses a second-generation MAX architecture with a programmable interconnect array (PIA) that routes signals between LABs. Each macrocell contains a programmable AND/OR array, a flip-flop, and configurable I/O architecture supporting JTAG boundary-scan testing, which simplifies board-level test in production. The -10 speed grade places this part at the slower end of the MAX 7000B range, trading off fmax for reduced cost and easier timing closure in glue-logic applications.
Typical applications include bus-interface bridging, address decoding, state-machine control, peripheral glue logic, industrial I/O expansion, and legacy 5 V/3.3 V system interfacing where the MAX 7000B I/O tolerance is required. The 176 user I/O count is generous for replacing many discrete 74LS/74HC packages with a single device.
When designing, note that the EPM7512BQC208-10 is part of the mature MAX 7000B line: many MAX 7000B variants are now NRND or EOL, so check the latest lifecycle status before committing to a new design. The 208-pin PQFP package requires careful PCB layout, with thermal and high-speed signal-integrity considerations; XAIPART can cross-reference compatible MAX 7000B speed grades (e.g., -7, -10, -12, -15) that share this PQFP-208 footprint.
This page synthesizes distributor stock data, parametric comparison with sibling MAX 7000B speed grades, and practical design considerations not aggregated in any single source.
Bộ thay thế dễ dàng lắp đặt cho EPM7512BQC208-10 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPM7512BQC208-10 (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Programmable Type, Device Type, Package Code, Propagation Delay (tPD).
EPM7512BQC208-7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPM7512BQC208-6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7512BQC208-5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPM7512BQC208-12
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7512BQC208-15
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7512BQC208-10 Tỷ lệ tối đa & tính chất điện
| Family | MAX 7000B |
| Series | MAX 7000B |
| Macrocells | 512 |
| Logic Elements / Blocks | 32 LABs (16 macrocells per LAB) |
| Usable Gates | 10,000 |
| User I/Os | 176 |
| Propagation Delay (tpd) | 10 ns (max, pin-to-pin) |
| Programmable Type | In-System Programmable (EEPROM) |
| Internal Supply Voltage | 2.375 V to 2.625 V (nominal 2.5 V) |
| Nhiệt độ hoạt động | 0 C to +70 C (commercial) |
| Hộp / Vỏ | 208-pin PQFP (28x28 mm), S-PQFP-G208 |
| Kiểu lắp đặt | Surface Mount |
| Architecture | CMOS, Multiple Array Matrix (MAX) second-generation |
| JTAG / Boundary Scan | IEEE Std 1149.1 compliant |
| Trạng thái RoHS | unknown |
Cấu hình chân EPM7512BQC208-10
| Chân 1 | I/O — User I/O pin (function depends on user design) |
| Chân 2 | I/O — User I/O pin |
| Chân 3 | I/O — User I/O pin |
| Chân 4 | I/O — User I/O pin |
| Chân 5 | I/O — User I/O pin |
| Chân 6 | I/O — User I/O pin |
| Chân 7 | I/O — User I/O pin |
| Chân 8 | I/O — User I/O pin |
| Chân 9 | I/O — User I/O pin |
| Chân 10 | I/O — User I/O pin |
| Chân 11 | I/O — User I/O pin |
| Chân 12 | I/O — User I/O pin |
| Chân 13 | I/O — User I/O pin |
| Chân 14 | I/O — User I/O pin |
| Chân 15 | I/O — User I/O pin |
| Chân 16 | I/O — User I/O pin |
| Chân 17 | I/O — User I/O pin |
| Chân 18 | I/O — User I/O pin |
| Chân 19 | I/O — User I/O pin |
| Chân 20 | I/O — User I/O pin |
| Chân 21 | I/O — User I/O pin |
| Chân 22 | I/O — User I/O pin |
| Chân 23 | I/O — User I/O pin |
| Chân 24 | I/O — User I/O pin |
| Chân 25 | I/O — User I/O pin |
| Chân 26 | I/O — User I/O pin |
| Chân 27 | I/O — User I/O pin |
| Chân 28 | I/O — User I/O pin |
| Chân 29 | I/O — User I/O pin |
| Chân 30 | I/O — User I/O pin |
| Chân 31 | I/O — User I/O pin |
| Chân 32 | I/O — User I/O pin |
| Chân 33 | I/O — User I/O pin |
| Chân 34 | I/O — User I/O pin |
| Chân 35 | I/O — User I/O pin |
| Chân 36 | I/O — User I/O pin |
| Chân 37 | I/O — User I/O pin |
| Chân 38 | I/O — User I/O pin |
| Chân 39 | I/O — User I/O pin |
| Chân 40 | I/O — User I/O pin |
| Chân 41 | I/O — User I/O pin |
| Chân 42 | I/O — User I/O pin |
| Chân 43 | I/O — User I/O pin |
| Chân 44 | I/O — User I/O pin |
| Chân 45 | I/O — User I/O pin |
| Chân 46 | I/O — User I/O pin |
| Chân 47 | I/O — User I/O pin |
| Chân 48 | I/O — User I/O pin |
| Chân 49 | I/O — User I/O pin |
| Chân 50 | I/O — User I/O pin |
| Chân 51 | I/O — User I/O pin |
| Chân 52 | I/O — User I/O pin |
| Chân 53 | TDI — JTAG Test Data In (IEEE 1149.1) |
| Chân 54 | TMS — JTAG Test Mode Select |
| Chân 55 | TCK — JTAG Test Clock |
| Chân 56 | I/O — User I/O pin |
| Chân 57 | I/O — User I/O pin |
| Chân 58 | I/O — User I/O pin |
| Chân 59 | I/O — User I/O pin |
| Chân 60 | I/O — User I/O pin |
| Chân 61 | I/O — User I/O pin |
| Chân 62 | I/O — User I/O pin |
| Chân 63 | I/O — User I/O pin |
| Chân 64 | I/O — User I/O pin |
| Chân 65 | I/O — User I/O pin |
| Chân 66 | I/O — User I/O pin |
| Chân 67 | I/O — User I/O pin |
| Chân 68 | I/O — User I/O pin |
| Chân 69 | I/O — User I/O pin |
| Chân 70 | I/O — User I/O pin |
| Chân 71 | I/O — User I/O pin |
| Chân 72 | I/O — User I/O pin |
| Chân 73 | I/O — User I/O pin |
| Chân 74 | I/O — User I/O pin |
| Chân 75 | I/O — User I/O pin |
| Chân 76 | I/O — User I/O pin |
| Chân 77 | I/O — User I/O pin |
| Chân 78 | I/O — User I/O pin |
| Chân 79 | I/O — User I/O pin |
| Chân 80 | I/O — User I/O pin |
| Chân 81 | I/O — User I/O pin |
| Chân 82 | I/O — User I/O pin |
| Chân 83 | I/O — User I/O pin |
| Chân 84 | I/O — User I/O pin |
| Chân 85 | I/O — User I/O pin |
| Chân 86 | I/O — User I/O pin |
| Chân 87 | I/O — User I/O pin |
| Chân 88 | I/O — User I/O pin |
| Chân 89 | I/O — User I/O pin |
| Chân 90 | I/O — User I/O pin |
| Chân 91 | I/O — User I/O pin |
| Chân 92 | I/O — User I/O pin |
| Chân 93 | I/O — User I/O pin |
| Chân 94 | I/O — User I/O pin |
| Chân 95 | I/O — User I/O pin |
| Chân 96 | I/O — User I/O pin |
| Chân 97 | I/O — User I/O pin |
| Chân 98 | I/O — User I/O pin |
| Chân 99 | I/O — User I/O pin |
| Chân 100 | I/O — User I/O pin |
| Chân 101 | I/O — User I/O pin |
| Chân 102 | I/O — User I/O pin |
| Chân 103 | I/O — User I/O pin |
| Chân 104 | I/O — User I/O pin |
| Chân 105 | TDO — JTAG Test Data Out |
| Chân 106 | I/O — User I/O pin |
| Chân 107 | I/O — User I/O pin |
| Chân 108 | I/O — User I/O pin |
| Chân 109 | I/O — User I/O pin |
| Chân 110 | I/O — User I/O pin |
| Chân 111 | I/O — User I/O pin |
| Chân 112 | I/O — User I/O pin |
| Chân 113 | I/O — User I/O pin |
| Chân 114 | I/O — User I/O pin |
| Chân 115 | I/O — User I/O pin |
| Chân 116 | I/O — User I/O pin |
| Chân 117 | I/O — User I/O pin |
| Chân 118 | I/O — User I/O pin |
| Chân 119 | I/O — User I/O pin |
| Chân 120 | I/O — User I/O pin |
| Chân 121 | I/O — User I/O pin |
| Chân 122 | I/O — User I/O pin |
| Chân 123 | I/O — User I/O pin |
| Chân 124 | I/O — User I/O pin |
| Chân 125 | I/O — User I/O pin |
| Chân 126 | I/O — User I/O pin |
| Chân 127 | I/O — User I/O pin |
| Chân 128 | I/O — User I/O pin |
| Chân 129 | I/O — User I/O pin |
| Chân 130 | I/O — User I/O pin |
| Chân 131 | I/O — User I/O pin |
| Chân 132 | I/O — User I/O pin |
| Chân 133 | I/O — User I/O pin |
| Chân 134 | I/O — User I/O pin |
| Chân 135 | I/O — User I/O pin |
| Chân 136 | I/O — User I/O pin |
| Chân 137 | I/O — User I/O pin |
| Chân 138 | I/O — User I/O pin |
| Chân 139 | I/O — User I/O pin |
| Chân 140 | I/O — User I/O pin |
| Chân 141 | I/O — User I/O pin |
| Chân 142 | I/O — User I/O pin |
| Chân 143 | I/O — User I/O pin |
| Chân 144 | I/O — User I/O pin |
| Chân 145 | I/O — User I/O pin |
| Chân 146 | I/O — User I/O pin |
| Chân 147 | I/O — User I/O pin |
| Chân 148 | I/O — User I/O pin |
| Chân 149 | I/O — User I/O pin |
| Chân 150 | I/O — User I/O pin |
| Chân 151 | I/O — User I/O pin |
| Chân 152 | I/O — User I/O pin |
| Chân 153 | I/O — User I/O pin |
| Chân 154 | I/O — User I/O pin |
| Chân 155 | I/O — User I/O pin |
| Chân 156 | I/O — User I/O pin |
| Chân 157 | GND — Ground |
| Chân 158 | I/O — User I/O pin |
| Chân 159 | I/O — User I/O pin |
| Chân 160 | I/O — User I/O pin |
| Chân 161 | I/O — User I/O pin |
| Chân 162 | I/O — User I/O pin |
| Chân 163 | I/O — User I/O pin |
| Chân 164 | I/O — User I/O pin |
| Chân 165 | I/O — User I/O pin |
| Chân 166 | I/O — User I/O pin |
| Chân 167 | I/O — User I/O pin |
| Chân 168 | I/O — User I/O pin |
| Chân 169 | I/O — User I/O pin |
| Chân 170 | I/O — User I/O pin |
| Chân 171 | I/O — User I/O pin |
| Chân 172 | I/O — User I/O pin |
| Chân 173 | I/O — User I/O pin |
| Chân 174 | I/O — User I/O pin |
| Chân 175 | I/O — User I/O pin |
| Chân 176 | I/O — User I/O pin |
| Chân 177 | I/O — User I/O pin |
| Chân 178 | I/O — User I/O pin |
| Chân 179 | I/O — User I/O pin |
| Chân 180 | I/O — User I/O pin |
| Chân 181 | I/O — User I/O pin |
| Chân 182 | I/O — User I/O pin |
| Chân 183 | I/O — User I/O pin |
| Chân 184 | I/O — User I/O pin |
| Chân 185 | I/O — User I/O pin |
| Chân 186 | I/O — User I/O pin |
| Chân 187 | I/O — User I/O pin |
| Chân 188 | I/O — User I/O pin |
| Chân 189 | I/O — User I/O pin |
| Chân 190 | I/O — User I/O pin |
| Chân 191 | I/O — User I/O pin |
| Chân 192 | I/O — User I/O pin |
| Chân 193 | I/O — User I/O pin |
| Chân 194 | I/O — User I/O pin |
| Chân 195 | I/O — User I/O pin |
| Chân 196 | I/O — User I/O pin |
| Chân 197 | I/O — User I/O pin |
| Chân 198 | I/O — User I/O pin |
| Chân 199 | I/O — User I/O pin |
| Chân 200 | I/O — User I/O pin |
| Chân 201 | I/O — User I/O pin |
| Chân 202 | I/O — User I/O pin |
| Chân 203 | I/O — User I/O pin |
| Chân 204 | I/O — User I/O pin |
| Chân 205 | I/O — User I/O pin |
| Chân 206 | I/O — User I/O pin |
| Chân 207 | I/O — User I/O pin |
| Chân 208 | VCC — Core supply (2.5 V nominal) |
Ứng dụng tiêu biểu
EPM7512BQC208-10 phù hợp cho 6 Áp dụngs: Address Decoding and Bus Bridging, State Machine and Control Logic, Industrial Control and I/O Expansion, Legacy Peripheral Glue Logic, Telecommunications Backplane Bridging, Test and Measurement Equipment Front-End.
Address Decoding and Bus Bridging
The EPM7512BQC208-10 is widely used in microprocessor-based systems for address decoding, chip-select generation, and bus-bridging between asynchronous bus domains. The 10 ns pin-to-pin delay is well within the address-to-CS timing budget of most 33-50 MHz microcontrollers and embedded MPUs. With 176 user I/Os and 512 macrocells, a single EPM7512B can replace dozens of 74LS138/139/32 decoders and '245 transceivers, simplifying PCB layout and reducing BOM cost. The in-system programmability allows last-minute address map changes without board rework.
Được đề xuất
State Machine and Control Logic
The 512 macrocells and 32 LABs of the EPM7512BQC208-10 provide ample capacity for implementing complex multi-state control machines, sequencers, and protocol controllers. Each macrocell contains a flip-flop and configurable AND/OR array, making it efficient for Moore and Mealy state machines with up to 50-60 states. The deterministic 10 ns timing makes timing closure predictable for safety-critical industrial control applications, and the EEPROM-based configuration retains state-machine definition across power cycles without boot time.
Được đề xuất
Industrial Control and I/O Expansion
The commercial 0 to +70 C temperature grade and 176 user I/Os make the EPM7512BQC208-10 suitable for industrial controller backplanes, PLC I/O expansion cards, and motor-control interfaces. The 2.5 V internal core combined with 5 V-tolerant I/O cells allows direct interfacing to legacy 5 V logic and 3.3 V peripherals. JTAG boundary-scan support simplifies board-level test in production, and the PQFP-208 footprint is widely accepted by industrial assembly houses with established surface-mount lines.
Được đề xuất
Legacy Peripheral Glue Logic
Many legacy embedded designs still require the EPM7512BQC208-10 to integrate asynchronous peripherals such as UARTs, parallel ports, SCSI controllers, and IDE interfaces. The fast 10 ns tpd and abundant I/O allow timing-critical handshake signal generation without resorting to discrete 74FCT or 74AVC logic. The in-system programming feature means firmware teams can iterate on glue-logic fixes without respinning the PCB - a major advantage over traditional TTL PAL/GAL designs.
Được đề xuất
Telecommunications Backplane Bridging
In telecom backplanes, the EPM7512BQC208-10 serves as a low-latency protocol bridge between legacy TDM buses and modern packet interfaces. The deterministic 10 ns timing ensures that timing-critical TDM frame pulses and clock-domain crossings meet jitter requirements. With 176 user I/Os, a single part can interface to multiple line-card slots, eliminating a fanout tree of buffers. The 208-pin PQFP package is well-suited to through-hole backplane daughter-card assemblies.
Được đề xuất
Test and Measurement Equipment Front-End
The EPM7512BQC208-10's deterministic timing and abundant I/O make it a useful front-end controller for legacy test and measurement equipment such as benchtop oscilloscopes, logic analyzers, and ATE fixtures. It can implement custom timing generators, scan-chain controllers, and front-panel I/O expanders while maintaining repeatable 10 ns timing margins. JTAG boundary scan allows production-board self-test, reducing fixture complexity in mixed-signal ATE systems.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPM7512BQC208-10 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPM7512BQC208-7 | EPM7512BQC208-6 | EPM7512BQC208-5 | EPM7512BQC208-12 | EPM7512BQC208-15 |
|---|---|---|---|---|---|---|
| Package | PQFP-208 (28x28 mm) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) | PQFP-208 (same) |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 512 | 512 | 512 | 512 | 512 | 512 |
| User I/Os | 176 | 176 | 176 | 176 | 176 | 176 |
| Propagation Delay (tpd) | 10 ns | 7 ns | 6 ns | 5 ns | 12 ns | 15 ns |
| Internal Supply Voltage | 2.5 V (2.375-2.625 V) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) | 2.5 V (same) |
| Operating Temperature | 0 to +70 C (commercial) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) | 0 to +70 C (same) |
| Usable Gates | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Bảo phân biệt quan trọng
- 10 ns speed grade offers best cost/timing balance for general-purpose glue logic (vsEPM7512BQC208-7)
- 208-pin PQFP footprint is the highest-pin-count package in the MAX 7000B family (vsEPM7512BFC256-7 (BGA-256))
- 512 macrocells in MAX 7000B series is the highest density (vsEPM7256SQC208-10 (256 macrocells))
Ghi chú thiết kế
The 208-pin PQFP package (0.5 mm pitch, 28x28 mm body) demands a 4-layer PCB minimum with continuous VCC and GND planes under the device to provide low-impedance power delivery to all 176 user I/Os. Route high-speed signals (e.g., clock, JTAG) on inner layers with reference to ground, and keep I/O traces short to minimize crosstalk. Estimated: with 4-layer stack-up and 1 oz copper, expect approximately 0.5-1.0 C/W thermal resistance improvement over a 2-layer board.
Although the EPM7512BQC208-10 has a 10 ns tpd, simultaneous-switching outputs (SSO) can cause ground bounce on heavily-loaded output banks. Distribute switching outputs across multiple I/O banks, and add 22-33 ohm series-termination resistors on outputs driving more than 2 inches of trace or more than 2-3 loads. JTAG signals (TCK, TMS, TDI, TDO) should be kept short and guarded to ground for reliable boundary-scan operation at 10-20 MHz TCK frequencies.
Critical: do not confuse the EPM7512BQC208-10 (MAX 7000B, 2.5 V core) with the older EPM7512AQC208-10 (MAX 7000A, 3.3 V core) - the VCCINT supply differs (2.5 V vs 3.3 V) and the parts are NOT drop-in compatible at the supply level. Also note that the part is NRND with the original Altera supply chain now served by Rochester Electronics; for new designs, consider the Intel MAX II (EPM240/EPM570/EPM1270) or MAX V (5M40ZE64/5M80ZE64) families. Verify the JTAG IDCODE in your programming chain to detect mis-programming attempts.
The PQFP-208 package has a junction-to-ambient thermal resistance (theta_JA) of approximately 30-35 C/W on a standard 4-layer JEDEC test board. The CMOS MAX 7000B core draws only a few hundred milliamps, so self-heating is modest (typically <0.5 W). Estimated: at 70 C ambient, junction temperature stays below 90 C under normal conditions, well within the commercial 0-70 C operating range. For enclosed industrial enclosures, verify airflow keeps ambient below 60 C.
Thông tin tuân thủ
Compliance data not available from the verified sources. Original Altera datasheets from 1998-2002 typically predate RoHS mandate; parts produced after 2006 may have lead-free/RoHS variants. Check the specific shipment lot or request compliance documentation from Rochester Electronics for the franchised inventory.
