BTG70902EPLXUMA1 vs BTS710336ESAXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTG70902EPLXUMA1 tarafından Infineon ve BTS710336ESAXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ Aktif
Özellik Karşılaştırması
| Parametre | BTG70902EPLXUMA1 | BTS710336ESAXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Family | PROFET+2 12V | — |
| Fonksiyon | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 6 (4 x 1.5 A + 2 x 3 A) |
| Input-to-Output Ratio | 1:1 | — |
| Çıkış Konfigürasyonu | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Akım Sınırı | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Paket | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) |
| İşletim Jant Sıcaklığı | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| RoHS Durumu | Compliant | Compliant |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Product Type | — | SPI high-side power switch (SPOC+2 family) |
| On-State Resistance (1.5 A channels) | — | 70 mOhm (typical) |
| On-State Resistance (3 A channels) | — | 22.5 mOhm (typical) |
| Maximum Channel Current (1.5 A channels) | — | 1.5 A |
| Maximum Channel Current (3 A channels) | — | 3 A |
| Logic Interface | — | SPI (daisy-chain capable, 3.3 V and 5 V compatible) |
| Diagnosis | — | Open-load, short-to-battery, short-to-ground, overtemperature, overload |
| Protection Functions | — | Overload, short-circuit, overtemperature, overvoltage |
| Technology | — | SMART7 (SMART power) |
| İşletim Sıcaklığı Aralığı | — | -40C to +150C (Tj) |
| Family | — | SPOC+2 |