BTS3060TFATMA1 vs BTS3125TFATMA1 Karşılaştırma

Ayrıntılı yan yana karşılaştırma BTS3060TFATMA1 tarafından Infineon ve BTS3125TFATMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre BTS3060TFATMA1 BTS3125TFATMA1
Marka Infineon Infineon
Kategori Power MOSFET Drivers Power MOSFET Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Smart Low-Side Power Switch Single-channel N-channel low-side smart power switch
Manufacturer Family HITFET —
Number of Channels 1 —
On-Resistance (RDS(on) typ) 50 mΩ at 25°C —
Maximum Continuous Load Current 3 A —
Maximum Load Supply Voltage 42 V —
Transistor Türü N-Channel Vertical Power MOSFET (monolithically integrated) —
Switch Configuration Low-Side, 1:1 —
Input Type Logic-level gate input (3.3V / 5V compatible) —
Diagnostic Output Status pin (open-drain, requires pull-up) —
Embedded Protection Overcurrent, Overtemperature, Overvoltage, Open-load detection —
Paket PG-TO252-3 (DPAK), 3 pins (2+Tab) PG-TO252-3-313 (DPAK, SC-63)
Montaj Türü Surface Mount Surface Mount
İşletim Sıcaklığı Aralığı -40°C to +150°C (junction) -40°C to +150°C
Automotive Qualification AEC-Q100 qualified —
Packaging Tape & Reel (TF suffix) —
RoHS Durumu Compliant Compliant
Load Current (continuous) — 2 A
Load Current (pulsed) — [DATA_NEEDED: pulsed drain current limit]
RDS(on) typical — 250 mΩ at 5 V Vbb
Supply Voltage (Vbb, nominal) — 5 V
Supply Voltage (Vbb, operating) — 5 V to 28 V
Load Dump Transient Protection — 40 V
Input Logic Compatibility — 3.3 V / 5 V CMOS
On-State Resistance (max) — [DATA_NEEDED: maximum RDS(on) over temp]
Jantten Ortama Termal Direnç — [DATA_NEEDED: theta_JA value]
Over-temperature Shutdown — ~150°C with auto-restart
Short-Circuit Protection — Yes, current-limited
Over-voltage Protection — Yes (clamping at 40 V)
ESD Protection — Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating])
Status Flag Output — Yes (fault feedback)
MSL Seviyesi — [DATA_NEEDED: MSL moisture sensitivity level]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin