BTS3060TFATMA1 vs BTS3125TFATMA1 مقایسه
مقایسه دقیق کنار به کنار BTS3060TFATMA1 توسط Infineon و BTS3125TFATMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بستهبندی، وضعیت چرخه عمر، قیمتگذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTS3060TFATMA1 | BTS3125TFATMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دستهبندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | — |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| نوع ترانزیستور | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | — |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| بستهبندی | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-313 (DPAK, SC-63) |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40°C to +150°C (junction) | -40°C to +150°C |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packaging | Tape & Reel (TF suffix) | — |
| وضعیت RoHS | Compliant | Compliant |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| مقاومت حرارتی، اتصال به محیط | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |
| سطح MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |