BTS3060TFATMA1 vs BTS3125TFATMA1 比較
詳細並排比較 BTS3060TFATMA1 由 Infineon 與 BTS3125TFATMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS3060TFATMA1 | BTS3125TFATMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | — |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| 電晶體類型 | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | — |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| 封裝 | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-313 (DPAK, SC-63) |
| 安裝類型 | Surface Mount | Surface Mount |
| 工作溫度範圍 | -40°C to +150°C (junction) | -40°C to +150°C |
| Automotive Qualification | AEC-Q100 qualified | — |
| Packaging | Tape & Reel (TF suffix) | — |
| RoHS 狀態 | Compliant | Compliant |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| 熱阻，接面至環境 | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |
| MSL 等級 | — | [DATA_NEEDED: MSL moisture sensitivity level] |