EPC21LC20 vs EPC2CC20N Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC21LC20 tarafından Intel ve EPC2CC20N tarafından AlteraAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC21LC20 | EPC2CC20N |
|---|---|---|
| Marka | Intel | Altera |
| Kategori | Memory ICs | FPGA & CPLD |
| Yaşam Döngüsü Durumu | Aktif | NRND |
| Bellek Türü | Serial Configuration PROM (Flash-based, in-system programmable) | — |
| Density | 2 Mb (2,097,152 bits) | [DATA_NEEDED: bitstream density in bits] |
| Configuration Mode Supported | Serial (PS) for Altera SRAM-based LUT FPGAs | — |
| Maximum DCLK Frequency | 10 MHz | — |
| Access Time | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] | — |
| Programming Interface | IEEE 1149.1 (JTAG) | JTAG (IEEE 1149.1) via ByteBlasterMV / USB-Blaster |
| Program/Erase Endurance | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] | — |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Standby Current | [DATA_NEEDED: ICCSB value] | — |
| Active Read Current | [DATA_NEEDED: ICC active current] | — |
| Operating Temperature (commercial) | 0 °C to +70 °C (LC suffix) | — |
| Operating Temperature (industrial) | [DATA_NEEDED: -40 to +85 °C for LI variant] | — |
| Paket / Kas | 20-pin PLCC (J-lead, JEDEC MS-018) | — |
| Montaj Türü | Surface Mount (PLCC socket or solder) | Surface Mount (PLCC-20 socket compatible) |
| MSL Seviyesi | [DATA_NEEDED: confirm moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS Durumu | [DATA_NEEDED: confirm from Altera product page] | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free (Pb-free) | [DATA_NEEDED: confirm] | — |
| Compatible FPGA Families | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) | — |
| JTAG Boundary-Scan Compliant | Yes (IEEE Std 1149.1) | — |
| Data Width | 1 bit (serial DATA output) | — |
| Fonksiyon | — | Configuration device for SRAM-based LUT FPGAs |
| Paket | — | PLCC-20 |
| Configuration Interface | — | 16-bit parallel (FPP) / Passive Serial (PS) |
| Supply Voltage (VCC) | — | 3.3 V |
| In-System Programmable | — | Yes |
| Error Detection | — | 16-bit CRC on configuration frames |
| Configuration Modes Supported | — | FPP and PS (depends on host FPGA) |
| Cascadable | — | Yes (multiple EPC2 devices for larger bitstreams) |
| Open-Drain Status Pin | — | Yes (CONF_DONE / nSTATUS compatible) |
| İşletim Sıcaklığı | — | [DATA_NEEDED: industrial/commercial temp range] |