Analog Devices

AD624BDZ - 25 MHz Low-Noise Instrumentation Amplifier | Analog Devices

MPN: AD624BDZ ✗ Son Kullanım Zamanı
75 µV Vdss 16-lead ceramic DIP Package
MOQ: 1 |

AD624BDZ Genel Bakış

The Analog Devices AD624BDZ is a high-precision, low-noise instrumentation amplifier designed for low-level transducer and sensor signal conditioning. It provides a 25 MHz gain-bandwidth product, 5 V/µs slew rate, and 15 µs settling time for high-speed data-acquisition applications. The AD624BDZ is supplied in a 16-lead ceramic DIP package and supports internal trimmed gains of 1, 100, 200, 500, and 1000 without external gain-setting components. Its specified input offset voltage is 75 µV, and the operating supply range is ±6 V to ±18 V.

An instrumentation amplifier is a precision analog signal-conditioning device built to amplify small differential sensor signals while rejecting common-mode noise and interference. The AD624 family is commonly used with load cells, strain gauges, and pressure transducers because it combines differential input handling, high gain accuracy, low noise, and fast settling performance in one integrated circuit. In a typical measurement chain, the sensor converts a physical quantity into a small differential voltage, the AD624BDZ amplifies that voltage, and a downstream ADC or data-acquisition system performs digitization.

The AD624 offers several features suited to precision measurement systems. Its internal trimmed gain options eliminate the need for precision external feedback resistors for common gain settings, while its high bandwidth supports faster acquisition cycles than a conventional slow instrumentation amplifier. The 5 V/µs slew rate helps preserve signal fidelity during large transient responses, and the 15 µs settling time allows the amplifier output to stabilize rapidly between measurements. Low noise makes the device suitable for sensors whose useful signal amplitude is close to the measurement system’s noise floor.

The AD624BDZ uses a three-op-amp instrumentation-amplifier architecture to provide high input impedance and accurate differential gain. Its internal resistors and trim circuitry establish accurate gain without requiring external calibration resistors for the predefined gains. The device is intended for systems operating from dual positive and negative supplies, allowing bipolar sensor signals to remain centered around ground. The manufacturer identifies the AD624 as a precision, low-noise instrumentation amplifier with strong DC and AC performance.

Typical applications include industrial load-cell measurement, strain-gauge bridges, pressure-transducer interfaces, laboratory instrumentation, biomedical signal acquisition, and high-speed data-acquisition systems. The 16-lead ceramic-DIP package makes it suitable for equipment requiring a through-hole component and a conventional industrial or laboratory instrumentation architecture.

When using the AD624BDZ, confirm the supply voltage, gain configuration, input common-mode range, and output swing against the sensor and ADC interface. Place the device close to the transducer to minimize interference pickup on high-impedance sensor lines, and use suitable bypassing capacitors around the power pins. The ceramic DIP package also requires attention to socket or PCB through-hole alignment and thermal management during system assembly.

This page combines manufacturer specifications, package information, pricing references, and practical selection guidance for engineers evaluating the AD624BDZ in precision sensor-conditioning and data-acquisition designs.

Drop-in alternatifler için AD624BDZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller AD624BDZ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Mounting Type, Input Offset Voltage, Settling Time, Slew Rate.

Analog Devices
Mounting Type: Through-hole ceramic DIP
İle Karşılaştır AD624BDZ →
Analog Devices
Package: 16-lead ceramic DIP (CDIP)
Input Offset Voltage: 200 µV
Analog Devices
Package: 16-CDIP (0.300 inch, 7.62 mm)
Mounting Type: Through Hole
Input Offset Voltage: 200 uV
İle Karşılaştır AD624BDZ →
Analog Devices
Package: 16-CDIP (0.300 in, 7.62 mm)
Mounting Type: Through-hole ceramic DIP
Settling Time: 15 us
İle Karşılaştır AD624BDZ →

AD624BD

✅ Yerleştirme
Analog Devices
📦 16-lead ceramic DIP
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/µs · 15 µs · 0.2 V p-p at 10 Hz · 5 ppm/°C maximum · 0.001% maximum to gain 200

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

AD624CDZ

✅ Yerleştirme
Analog Devices
📦 16-lead ceramic DIP
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/us · 15 us · 1, 100, 200, 500, and 1000 · Present; external resistor supported for other gains · 15 nA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

AD624SD/883B

✅ Yerleştirme
📦 16-lead ceramic DIP
AD624 family replacement identified in cross-reference results; military or specialty ordering-grade differences are not quantified

📋 Katalogda Olmayan Referans Alternatifi

AD624BDZ Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Precision instrumentation amplifier
Number of Amplifiers 1 circuit
Gain-Bandwidth Product 25 MHz
Slew Rate 5 V/µs
Settling Time 15 µs
Input Offset Voltage 75 µV
Supply Voltage Range ±6 V to ±18 V
Trimmed Gain Settings 1, 100, 200, 500, and 1000
External Gain-Setting Components Not required for trimmed gains
Input Signal Type Differential
Paket 16-lead ceramic DIP
Montaj Türü Through-hole
RoHS Durumu unknown
REACH Status unknown
Automotive Qualification not_applicable

AD624BDZ 16-lead ceramic dip Pin Yapısı Kılavuzu

AD624BDZ (16-lead ceramic dip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

16-lead ceramic dip paket pin çizelgesi için AD624BDZ

Ayrıntılı pin çıkış verisi mevcut değil: AD624BDZ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

AD624BDZ için uygundur 6 uygulamas: Load-Cell Measurement, Strain-Gauge Signal Conditioning, Pressure Transducer Interface, High-Speed Data Acquisition, Biomedical Sensor Signal, Laboratory Instrumentation.

🏭

Load-Cell Measurement

The AD624BDZ suits load-cell front ends that produce small differential voltages from a bridge sensor. Its precision instrumentation-amplifier architecture provides high common-mode rejection while the low-noise, 25 MHz gain-bandwidth product supports fast measurement acquisition. Internal trimmed gains of 1, 100, 200, 500, and 1000 simplify calibration for common bridge sensitivities. The 5 V/µs slew rate and 15 µs settling time help the system settle quickly between successive readings.

🏭

Strain-Gauge Signal Conditioning

The AD624BDZ is appropriate for strain-gauge bridge conditioning where the useful differential signal is small and susceptible to interference. The device combines a 75 µV input offset specification with low noise, helping preserve measurement integrity in precision strain systems. Its selectable internal gains reduce external resistor requirements for common gain values, while the 16-lead ceramic DIP package fits through-hole instrumentation and test equipment.

⚡

Pressure Transducer Interface

The AD624BDZ can condition the millivolt-level output of a bridge-based pressure transducer while rejecting common-mode voltage present on the sensor lines. Its 25 MHz gain-bandwidth product and 15 µs settling time support fast data-acquisition sequences, and the 5 V/µs slew rate improves response to transient events. Internal trimmed gains from 1 through 1000 provide several sensitivity ranges without requiring a full external gain network.

🖥️

High-Speed Data Acquisition

The AD624BDZ fits high-speed acquisition channels that need more bandwidth than a slow precision instrumentation amplifier. Its 25 MHz gain-bandwidth product, 5 V/µs slew rate, and 15 µs settling time allow output settling between measurements. The part is useful where sensor signals must be amplified before ADC sampling while preserving low noise and accurate differential behavior.

💊

Biomedical Sensor Signal

The AD624BDZ can amplify small differential biomedical sensor signals when the circuit requires accurate offset control and low-noise amplification. The 75 µV input offset specification and internal trimmed gains help establish repeatable measurement conditions, while the fast settling behavior supports rapid signal sampling. Designers should still verify patient-safety isolation requirements, input protection, and applicable medical standards before connecting the amplifier to a clinical system.

🔧

Laboratory Instrumentation

The AD624BDZ is well suited to precision laboratory instruments that combine selectable gain, low noise, and rapid settling. The internal gain choices support repeatable setup for different sensor sensitivities, and the 25 MHz bandwidth allows acquisition systems to sample transient or time-varying inputs. Its through-hole ceramic-DIP package is convenient for laboratory electronics, modular instruments, and serviceable measurement platforms.

Önerilen Ürünler Özeti

AD524AD Digitally controlled precision gain amplifier Kullanıldığı Yer: Load-Cell Measurement, Strain-Gauge Signal Conditioning, Pressure Transducer Interface, High-Speed Data Acquisition XTR101AG Transducer interface for bridge sensors Kullanıldığı Yer: Load-Cell Measurement, Strain-Gauge Signal Conditioning, Pressure Transducer Interface AD506KH Analog Devices Kullanıldığı Yer: High-Speed Data Acquisition, Biomedical Sensor Signal AD504SH Analog Devices Kullanıldığı Yer: Biomedical Sensor Signal AD506JH Analog Devices Kullanıldığı Yer: Laboratory Instrumentation AD503JH Analog Devices Kullanıldığı Yer: Laboratory Instrumentation
What is the AD624BDZ?
The AD624BDZ is a precision, low-noise instrumentation amplifier from Analog Devices for low-level differential sensor signals. According to the manufacturer product information, it combines a 25 MHz gain-bandwidth product, 5 V/µs slew rate, 15 µs settling time, and internal trimmed gains of 1, 100, 200, 500, and 1000 in a 16-lead ceramic DIP package.
What is the operating voltage range of AD624BDZ?
The AD624BDZ operates from ±6 V to ±18 V, requiring positive and negative supply rails for bipolar signal operation. The FindIC product listing identifies the AD624BDZ supply range as ±6 V to ±18 V. The dual-supply arrangement lets the amplifier process signals centered around ground while preserving headroom for output swing.
What are the key specifications of AD624BDZ?
The AD624BDZ is specified for 25 MHz gain-bandwidth product, 5 V/µs slew rate, 15 µs settling time, 75 µV input offset voltage, and internal trimmed gains from 1 to 1000. The manufacturer describes it as a high-precision, low-noise instrumentation amplifier for load cells, strain gauges, pressure transducers, and high-speed data acquisition.
What is the input offset voltage of AD624BDZ?
The AD624BDZ has a specified input offset voltage of 75 µV. This parameter is important in bridge-based measurements because offset error can appear as a nonzero output at zero differential input. The value is identified in the AD624 product specifications and should be included in the system error budget alongside amplifier noise and gain error.
Where to download the AD624BDZ datasheet PDF?
The AD624BDZ datasheet can be downloaded from Analog Devices through the official AD624 product page at analog.com. A separate AD624BDZ PDF is also hosted by Digi Electronics at the listed datasheet URL. Use the manufacturer PDF for authoritative pin descriptions, supply limits, gain tables, input common-mode range, and application information.
Where can I find the AD624BDZ pinout?
The AD624BDZ pinout is identified in the Analog Devices AD624 datasheet, specifically in the package and pin-description material for the 16-lead ceramic DIP. The available product information confirms the 16-lead package and function but does not reproduce the complete pin list. Use the manufacturer pin-description table when assigning PCB or socket connections.
What can replace the AD624BDZ?
The AD624BDZ can be replaced only after confirming the exact package, gain network, supply range, temperature grade, and pin assignments. AD624BD, AD624CDZ, and AD624SD/883B appear in the AD624 cross-reference results, but they are not automatically interchangeable in every installation. Request a quote for the exact replacement MPN and validate its datasheet before substituting it.
Is AD624BDZ suitable for load-cell and strain-gauge measurements?
Yes. The AD624BDZ is specifically designed for low-level transducer signals, including load cells and strain gauges. Its differential-input architecture, low noise, precision offset specification, and internal gain settings support accurate bridge-signal conditioning. The design must also meet the sensor excitation, input common-mode range, and output-swing requirements of the particular measurement channel.
What is the difference between AD624BDZ and AD624CDZ?
AD624BDZ and AD624CDZ are both AD624-family precision instrumentation amplifiers identified in cross-reference results, but their exact ordering options, temperature grades, and qualification details must be checked in the manufacturer datasheet. The AD624BDZ is listed as a 16-CDIP device. Compare the ordering table, ceramic-DIP dimensions, pinout, grade, and lifecycle status before treating either part as a replacement.
When should I choose AD624BDZ over another instrumentation amplifier?
Choose the AD624BDZ when the design needs a high-precision, low-noise differential amplifier with selectable internal gains and a 25 MHz gain-bandwidth product. It is particularly useful for load cells, strain gauges, and pressure transducers that require both signal conditioning and fast acquisition. Select a different device when its package, supply architecture, input range, or acquisition timing does not meet the system specification.
AD624BDZ vs AD524AD - which is better for a precision bridge sensor?
The AD624BDZ is a stronger fit when the design specifically requires the AD624’s 25 MHz gain-bandwidth product, 5 V/µs slew rate, 15 µs settling time, and internal trimmed gains of 1, 100, 200, 500, and 1000. AD524AD may be appropriate for digitally controlled gain applications, but the complete pinout and digital-control requirements differ. Verify the interface and package before selecting it.
What is the slew rate of AD624BDZ?
The AD624BDZ has a specified slew rate of 5 V/µs. This allows the output to move rapidly through signal transitions, which is important in high-speed data-acquisition systems and when processing transient sensor events. The manufacturer pairs this specification with a 25 MHz gain-bandwidth product and 15 µs settling time.
Does AD624BDZ need external components for standard gain settings?
No external components are needed for the AD624’s internal trimmed gains of 1, 100, 200, 500, and 1000. According to the manufacturer product page, these predefined gains are trimmed internally. Other gain values may require external gain-setting components, and the datasheet’s recommended resistor and layout guidance should be followed.
Is AD624BDZ available in stock?
Current stock status should be requested through the Request a Quote form on this page. The product listings identify AD624BDZ as an Analog Devices 16-CDIP instrumentation amplifier, but inventory can change with market conditions and procurement schedules. Submit the required quantity, package, and grade information with the quote request.
How do I request a price and lead time for AD624BDZ?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for AD624BDZ. The form should include the desired quantity and the exact 16-CDIP package requirement. This approach provides a current procurement response without presenting a stale price or an unconfirmed availability claim.

Mühendislik referans verileri: AD624BDZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the AD624BDZ for precision bridge-sensor and general instrumentation designs that require a low-noise differential amplifier, 25 MHz gain-bandwidth product, 5 V/µs slew rate, and rapid 15 µs settling. Its internal trimmed gains of 1, 100, 200, 500, and 1000 are especially useful when the sensor range is known and external gain resistors are undesirable. AD624BD and AD624CDZ are reasonable same-family alternatives when the ordering grade, temperature range, and lifecycle requirements differ, but their exact specifications and package suffix must be checked. AD624SD/883B may suit systems requiring a specialized ordering grade, subject to manufacturer documentation. The AD624BDZ is not interchangeable with digitally controlled gain amplifiers such as AD524AD without a PCB and interface redesign.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün AD624BD AD624CDZ AD624SD/883B
Package 16-lead ceramic DIP 16-lead ceramic DIP 16-lead ceramic DIP 16-lead ceramic DIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Precision instrumentation amplifier AD624-family instrumentation amplifier AD624-family instrumentation amplifier AD624-family instrumentation amplifier

Ana Farklılayıcılar

  • Fast measurement settling (karşılaştırma:AD624BD)
  • Internal gain programming without external resistors (karşılaştırma:AD624CDZ)
  • Precision input offset specification (karşılaştırma:AD624SD/883B)

Tasarım Notları

Place the AD624BDZ close to the sensor input connector and route the differential input pair as a short, tightly coupled pair. High-impedance transducer lines should be kept away from switching nodes and digital timing signals. The manufacturer’s application guidance and pin-description table should be used to identify the input and supply pins on the 16-lead ceramic-DIP footprint.

The AD624BDZ requires positive and negative supplies in the ±6 V to ±18 V range. Confirm that both rails remain within limits under startup, load transients, and supply ripple. Use local decoupling close to the supply pins, with capacitor values and stability requirements selected from the manufacturer datasheet.

Do not assume that every AD624 suffix is an automatic drop-in replacement. Confirm the ceramic-DIP lead count, pin names, temperature grade, gain implementation, and required external components for AD624BD, AD624CDZ, or AD624SD/883B. For custom gains, follow the manufacturer’s resistor values and layout guidance rather than changing feedback components without stability checks.

The 25 MHz gain-bandwidth product, 5 V/µs slew rate, and 15 µs settling time make bandwidth and settling time important in acquisition systems. Account for the complete signal chain, including sensor capacitance, cable capacitance, output loading, and ADC acquisition time. Provide a defined settling interval before taking a measurement when the source changes rapidly.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance attributes are not specified for the AD624BDZ in the available product information. The 16-lead ceramic-DIP package and ±6 V to ±18 V supply range are identified, while detailed package drawing and ordering-grade information should be checked in the manufacturer datasheet.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

AD624BDZ datasheet AD624BDZ pinout AD624BDZ datasheet pdf AD624BDZ specifications AD624BDZ equivalent AD624BDZ replacement AD624BDZ price AD624BDZ stock Analog Devices AD624BDZ AD624BDZ vs AD624CDZ AD624BDZ 25 MHz amplifier AD624BDZ 16-CDIP

İlgili Bileşenler ve Terimler

Analog Devices AD624BDZ AD624BD AD624CDZ AD624SD/883B AD524AD XTR101AG precision instrumentation amplifier instrumentation amplifier low-noise amplifier differential signal conditioner power management IC semiconductor load cell strain gauge pressure transducer gain-bandwidth product slew rate settling time input offset voltage 16-lead ceramic DIP through-hole package RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle