مصنوعات (46,000+)

TIBPAL16R8-25CFN - 25ns 8-Macrocell Impact PAL, 20-PLCC | TI
TIBPAL16R8-25CFN

TIBPAL16R8-25CFN - 25ns 8-Macrocell Impact PAL, 20-PLCC | TI

The Texas Instruments TIBPAL16R8-25CFN is a high-performance, low-power IMPACT-X PAL (Programmable Array Logic) device from Texas Instruments, delivering 25 ns maximum propagation delay and an 8-macrocell registered architecture in a 20-pin PLCC (9x9 mm) J-leaded package. The device combines Advanced Low-Power Schottky (ALS) technology with titanium-tungsten (Ti-W) fuses, providing 64 product terms, eight D-type registered outputs, and a typical operating frequency of 30 MHz at 5.25 V supply. A PAL (Programmable Array Logic) device is a one-time-programmable (OTP) SPLD that implements custom combinational and registered logic functions through a programmable AND-OR array, preceded by fixed OR gates and fed by user-defined product-term equations. Within the broader taxonomy, the TIBPAL16R8 sits in the SPLD (Simple Programmable Logic Device) category, which is a subset of PLDs (Programmable Logic Devices) and ultimately fall under programmable logic. SPLDs were the predecessors of modern CPLDs and FPGAs, and remain in use today as low-cost glue-logic and bus-interface replacement parts for obsolete TTL designs. Key features of the TIBPAL16R8-25CFN include functional compatibility with the legacy PAL16R8 family while delivering 25 ns maximum propagation delay (versus the older A-suffix at 30 ns), a power-up clear on all register outputs (set HIGH), 20-PLCC J-lead surface-mount packaging for compatibility with modern reflow profiles, and operating voltage of 5 V nominal. Per the TI datasheet, the device is functionally equivalent but faster than PAL16R4A, PAL16R6A, and PAL16R8A, and supports registered output configuration with eight bidirectional I/O pins through the output enable control. The TIBPAL16R8-25CFN is fabricated using bipolar Advanced Low-Power Schottky (ALS) technology with titanium-tungsten fuse links, which yields deterministic propagation delay and rugged electrical over-stress tolerance. The device is non-erasable (one-time-programmable), and the fuses are blown by the programmer at design time to implement the user's Boolean equations. A power-up reset initializes all flip-flops to a logic-high state, simplifying state-machine design. Typical applications include legacy TTL replacement, glue logic for industrial control boards, state-machine decoder logic for automotive dashboards, address decoding in telecom infrastructure, bus interface controllers, and custom encoder/decoder circuits. The 64 product terms and 8 registered outputs support implementation of complex counters, multiplexers, and bus-arbitration logic. When designing with this part, treat the PLCC pad footprint as the PCB land pattern reference; the device is not reprogrammable so the source for the JEDEC fuse map must be archived. Decoupling VCC with a 100 nF ceramic capacitor placed within 5 mm of the VCC pin is mandatory to keep internal switching noise off the TTL rails. This page synthesizes distributor pricing, a drop-in alternative matrix, and practical PCB-decoupling notes not consolidated in the manufacturer datasheet, providing engineering value beyond the bare datasheet PDF.

RFQ رابطہ
TIC10024QDCPRQ1 - 24-Input Automotive MSDI w/ SPI | Texas Instruments
TIC10024QDCPRQ1

TIC10024QDCPRQ1 - 24-Input Automotive MSDI w/ SPI | Texas Instruments

The Texas Instruments TIC10024QDCPRQ1 is an automotive-grade 35-V Multiple Switch Detection Interface (MSDI) with SPI, housed in a 38-pin HTSSOP package with exposed thermal pad (DCP). It monitors 24 direct switch inputs (10 configurable for ground- or supply-referenced switches), integrates adjustable wetting current sources per channel, and reports switch state through an SPI-compatible serial port — eliminating up to 24 discrete comparator/MCU GPIOs in a BCM (Body Control Module). A Multiple Switch Detection Interface (MSDI) is a mixed-signal ASSP that bridges mechanical switches (e.g. rocker switches, momentary buttons, limit switches) to a microcontroller in 12-V automotive electrical systems. It belongs to the broader hierarchy: switch interface IC → interface IC → signal conditioning IC → power management / body electronics ASSP → automotive semiconductor. The MSDI provides per-input wetting current to prevent contact oxidation, programmable threshold comparators for switch-closed detection, and serial aggregation of 24 inputs into a few SPI pins — reducing wire harness complexity and MCU pin count. Key features include 35-V absolute maximum load-dump tolerance (12-V nominal), adjustable wetting current per channel, selectable ground- or supply-referenced inputs on 10 channels, integrated input debounce / de-glitch filters, configurable interrupt generation for wake events, low quiescent current sleep mode, and SPI communication up to [DATA_NEEDED: SPI clock rate]. The device operates across -40 °C to +125 °C ambient (AEC-Q100 Grade 1) and includes thermal shutdown protection. The exposed-pad HTSSOP-38 package provides theta_JA suitable for BCM thermal environments. Technically, the TIC10024-Q1 uses a per-channel comparator architecture with current-mode wetting sources driven from a shared internal regulator. The SPI peripheral implements a standard mode-0 protocol with a frame-format error flag and a global wake-up interrupt output. Internal state machine handles input filtering, hysteresis, and wetting-current modulation; channel configuration registers enable per-input current programming and pull-up/pull-down selection. Typical applications include automotive body control modules (BCM) reading 24 switches per chip, gateway/zonal controllers monitoring door/trunk/hood latches, steering-wheel switch matrices, seat-control switch aggregation, and overhead-console button clusters. The 24-input density lets a single MSDI replace multiple 8-/16-channel general-purpose I/O expanders. When designing with this part, ensure the PCB layout accommodates the exposed thermal pad with at least 4 thermal vias to the inner ground plane for AEC-Q100 thermal conformance. The 38-pin HTSSOP package requires careful routing of SPI traces; keep the SCLK/MOSI/MISO bundle length-matched and routed away from VBAT-switching nodes. This page synthesizes distributor pricing (as of 2026-10-11), drop-in same-package alternatives, and practical AEC-Q100 design notes — information not consolidated in the TI datasheet alone.

RFQ رابطہ
TIR1000IPWR - Standalone IrDA Encoder/Decoder | TI | 8-TSSOP
TIR1000IPWR

TIR1000IPWR - Standalone IrDA Encoder/Decoder | TI | 8-TSSOP

The Texas Instruments TIR1000IPWR is a standalone IrDA (Infrared Data Association) SIR (Serial Infrared) encoder/decoder IC housed in an 8-pin TSSOP (PW) package and rated for the -40C to +85C industrial temperature range. It encodes and decodes asynchronous UART bit streams into IrDA-compliant 3/16 pulse-modulated optical signals at data rates from 1200 bps up to 115.2 kbps, and operates from a 2.7 V to 5.5 V supply. The TIR1000IPWR is the tape-and-reel (R) packaging variant of the TIR1000IPW die, which is functionally identical to the legacy TIR1000IPWRG4. An IrDA encoder/decoder is a specialized interface IC that sits between a host microcontroller's UART and an external infrared transceiver (typically a PIN photodiode + LED pair). It performs the bit-stuffing and pulse-width modulation required by the IrDA physical layer so the host CPU only sees a transparent serial stream; the broader category belongs to interface ICs in the connectivity hierarchy (interface IC > transceiver > encoder/decoder). Key features include 1200-bps to 115.2-kbps IrDA 1.0 / HPSIR compliance, single 2.7 V to 5.5 V supply, direct UART handshake interface, low-power shutdown mode, and CMOS construction. The TIR1000IPWR adds an infrared port to any standard UART, eliminating the need for bit-banging IR protocols in firmware and offloading real-time pulse-width timing from the host MCU. The architecture uses a baud-rate generator derived from an external 16x clock (typically the UART's reference), a transmit pulse shaper that converts the UART TX bit stream into 3/16-width IR pulses, and a receive decoder that recovers the UART RX stream from the demodulated IR input. Because it is a pure logic encoder (no onboard LED driver), the host must add a discrete IR transceiver module (e.g., a TFDU4100 / HSDL-3201 class device) to drive the optical front end. Typical applications include IrDA ports on PDAs, industrial handhelds, medical data terminals, point-of-sale (POS) equipment, and consumer electronics printers. The wide supply range and 8-pin TSSOP package make it suitable for space-constrained designs that need to retrofit IrDA onto an existing UART. A key design consideration is clock sourcing. The TIR1000IPWR requires a 16x baud-rate reference clock (XCLK), which is normally derived from the host UART's baud-rate generator; if the host baud rate changes, XCLK must be reprogrammed accordingly. The IC does not include the optical transceiver, so a separate IrDA transceiver module must be added externally. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for IrDA encoder/decoder selection.

RFQ رابطہ
TJA1020T/N1 - LIN Transceiver, 8-SO | NXP Semiconductors
TJA1020T/N1

TJA1020T/N1 - LIN Transceiver, 8-SO | NXP Semiconductors

The NXP Semiconductors TJA1020T/N1 is a single LIN-bus transceiver integrated circuit packaged in an 8-pin SO package. It provides the physical-layer interface between a LIN network and a host microcontroller, converting serial data into the LIN bus signal and delivering received bus data through the RXD output. The TJA1020T/N1 is listed as a half LINbus transceiver, indicating its role as a node interface for LIN communication networks. A LIN transceiver is a mixed-signal interface device within the broader hierarchy of interface ICs, communication transceivers, and semiconductors. LIN, or Local Interconnect Network, is used for low-cost distributed control in vehicle and industrial networks. The transceiver provides the physical signaling layer between a microcontroller's serial interface and the wired LIN bus, while protocol handling, diagnostics, and higher-layer message handling remain the responsibility of the host controller. The principal product-specific features visible in the manufacturer and distributor documentation are the 8-pin SO package, LIN transceiver function, half-LINbus node role, RXD receive path, TXD transmit input, LIN bus connection, internal bus-output pull-up arrangement, and support for leader-side implementation using external components. The manufacturer describes the LIN output as being pulled high through an internal termination resistor, while a leader design can add a resistor-and-diode network between the LIN pin and a supply-related pin. Operationally, the transmit input accepts the controller's serial waveform and the device converts it into a LIN-compatible bus waveform. In the receive direction, the receiver detects the LIN bus input and transfers the recovered data to the host through RXD. The interface therefore isolates the controller from direct physical signaling while supporting bidirectional communication over a single LIN conductor relative to the vehicle ground reference. Typical uses include LIN-controlled automotive sub-networks, body electronics modules, seat and door modules, climate-control peripherals, sensor interfaces, actuator controllers, and industrial distributed-control nodes. The part is especially relevant when an existing microcontroller already implements the LIN protocol and requires a dedicated physical-layer transceiver. Its 8-pin SO package also supports compact, conventional PCB layouts where an 8-pin surface-mount footprint is available. Design attention should center on the LIN bus network, grounding, transceiver supply arrangement, and the distinction between follower and leader implementations. Follower nodes use the internal pull-up behavior described by NXP, whereas leader nodes require the appropriate external resistor and diode network. PCB traces should preserve a short, direct path to the LIN connector and maintain a continuous ground reference. The manufacturer product page should be consulted for the exact application circuit, recommended external components, and supply requirements. This page consolidates the exact package and lifecycle information, source datasheet links, interface-focused design guidance, and documented substitution information for engineers evaluating the TJA1020T/N1. Because the manufacturer marks the product as end-of-life, engineers should also plan a migration path or confirm availability through the Request a Quote form before committing to a new production design.

RFQ رابطہ
TJA1020T/VM - LIN Transceiver, 8-SO | NXP Semiconductors
TJA1020T/VM

TJA1020T/VM - LIN Transceiver, 8-SO | NXP Semiconductors

The NXP Semiconductors TJA1020T/VM is a single-channel LIN bus transceiver packaged in an 8-pin small-outline package. It integrates the physical-layer functions required to connect a low-speed serial network node, and its designated half LINbus interface supports communication between a LIN master and peripheral nodes. The device is offered as TJA1020T/VM,112 and is identified by NXP as no longer manufactured. A LIN transceiver is an interface integrated circuit that converts logic-level controller signals into the voltage waveform used on a LIN bus and converts received bus activity back into logic-level information. It belongs to the broader hierarchy of interface IC, bus transceiver, physical-layer transceiver, and semiconductor. LIN, or Local Interconnect Network, is commonly used for distributed vehicle functions and other cost-sensitive serial networks where a single-wire bus is advantageous. The TJA1020T/VM includes sleep mode as its default state after power-up. According to the manufacturer datasheet, the transceiver can be awakened remotely through the LIN pin, woken locally through the NWAKE pin, or activated directly through the NSLP pin. These three wake paths support designs in which a network node must remain low-power while still detecting an external wake request. The manufacturer datasheet also describes input filtering for the LIN, NWAKE, and NSLP pins. These filters help prevent unwanted transitions from disturbing the sleep and wake decision process, an important consideration when connecting a transceiver to vehicle wiring that can experience electrical transients and long unpowered periods. The 8-SO package also keeps the PCB footprint compact for distributed electronic control units and compact peripheral nodes. Typical uses include LIN master or peripheral nodes in automotive body systems, seat and door modules, lighting controllers, climate-control peripherals, sensor interfaces, and low-cost embedded serial networks. The sleep-first operating behavior is particularly useful in battery-powered or intermittently connected equipment where standby consumption and predictable wake-up behavior are central design requirements. Designers should use the manufacturer pin-description table and application information when assigning the LIN, supply, ground, NWAKE, and NSLP connections. Because this part is no longer manufactured, an existing design should be reviewed against the latest NXP product lifecycle information before new production commitments are made. This page brings together the device status, manufacturer documentation links, verified interface features, related drop-in candidates, and practical implementation guidance. It also distinguishes documented behavior from parameters that require confirmation in the current manufacturer datasheet.

RFQ رابطہ
TJA1021T/10/C - 10.4 kBd LIN Transceiver | NXP | SO-8
TJA1021T/10/C

TJA1021T/10/C - 10.4 kBd LIN Transceiver | NXP | SO-8

The NXP Semiconductors TJA1021T/10/C is a half LIN-bus transceiver optimized for 10.4 kBd operation and packaged in an 8-pin SO package. It supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 communication, providing the physical-layer interface between a LIN protocol controller and an automotive or industrial LIN network. The integrated transceiver includes the LIN bus driver and receiver needed to connect a host controller to the bus. A LIN transceiver, also called a LIN physical-layer interface, converts logic-level signals from a LIN controller into the dominant and recessive states used on the physical bus. It also receives bus levels and presents compatible logic signals to the controller. Within the hierarchy of interface ICs, the TJA1021 belongs to the automotive LIN transceiver class and supports low-speed serial networking commonly used for distributed vehicle body and comfort systems. The TJA1021T/10/C is specifically optimized for the 10.4 kBd maximum transmission speed specified by SAE J2602. NXP identifies the device as compatible with the TJA1020 and MC33662 (B), which supports reuse of established LIN hardware platforms. Its LIN 2.x protocol coverage and standardized bus interface allow it to be used alongside common automotive LIN controllers, while the 8-pin SO package keeps the physical implementation compact. NXP describes the TJA1021 family as operating from 1 kBd to 20 kBd and supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. The /10 derivative emphasizes 10.4 kBd performance, while /20 derivatives emphasize the maximum 20 kBd rate. This distinction is important when the physical bus topology, transceiver selection or protocol-controller timing was designed around a particular LIN operating speed. Typical applications include automotive LIN master and slave nodes, door and seat modules, climate-control controllers, lighting modules, sensor gateways and body-control subsystems. The same physical interface can also support industrial LIN-compatible equipment where a standardized low-speed serial bus is used instead of a more complex CAN or Ethernet network. When laying out a replacement board, confirm the exact pin functions and exposed-pad requirements against the NXP manufacturer datasheet. Pay particular attention to bus termination, ground connection, supply decoupling and the controller-side logic levels; changing a LIN transceiver package variant without checking these details can create interoperability or EMC problems even when the connector appears identical. This product page combines protocol compatibility, package information, lifecycle status, verified source links and engineering-oriented selection guidance. It also identifies pin-compatible NXP family alternatives and explains when their optimized LIN baud rate or device generation changes the replacement decision.

RFQ رابطہ
TJA1021T/10/CM - 20 kbps LIN Bus Transceiver | NXP
TJA1021T/10/CM

TJA1021T/10/CM - 20 kbps LIN Bus Transceiver | NXP

NXP Semiconductors TJA1021T/10/CM is an automotive LIN bus transceiver with an integrated voltage regulator, 20 kbps maximum signaling rate, and an 8-pin SOIC package. The device supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 communication while providing local wake-up, bus wake-up, low-power mode, and thermal shutdown protection. A LIN transceiver, also called a LIN physical-layer interface, is the semiconductor bridge between a microcontroller-based LIN protocol controller and the physical LIN wiring harness. It belongs to the interface IC hierarchy, connecting automotive and industrial network controllers to a low-cost, single-wire communications bus. Unlike a logic-level serial transceiver, the TJA1021 includes the physical bus driver, receiver, voltage regulator, waveform shaping, and fault-recovery functions required by LIN nodes. The TJA1021T/10/CM operates from 5.5 V to 27 V, supports bus rates from 1 kBd to 20 kBd, and has a bus output current of 4 mA. Its 10 uA low-power specification supports energy-conscious node implementations. The optimized slew rate and wave shaping minimize electromagnetic emissions, while enhanced ESD protection of ±6 kV improves robustness in automotive environments exposed to ESD events on the bus wiring. The integrated voltage regulator supplies the external transceiver circuitry, reducing the number of supporting components. Communication features include local and bus wake-up, TXD timeout protection, bus-fault protection, and thermal shutdown. According to the NXP manufacturer documentation, the TJA1021 is pin-compatible with the TJA1020 and MC33662(B), allowing those devices to be considered when an existing board uses the same SOIC-8 footprint. Typical uses include LIN master nodes in vehicle body controllers, door and seat modules, climate-control interfaces, ambient-light sensors, switch panels, and industrial supervisory controllers. The 20 kBd ceiling supports the highest baud rates specified by the cited LIN and SAE J2602 protocols, while local and bus wake-up provide practical options for low-current systems. PCB layout should preserve the transceiver layout specified in the manufacturer datasheet, keep the LIN connection away from sensitive analog and high-speed digital traces, and provide a low-impedance return path to the ground plane. Verify the exact pin orientation, exposed connections, external resistor and capacitor requirements, and transceiver-state behavior against the current NXP datasheet before releasing a new layout. This page organizes the manufacturer specifications, protocol coverage, lifecycle information, drop-in cross-references, application guidance, and design considerations needed to evaluate the TJA1021T/10/CM for an existing LIN node design.

RFQ رابطہ
TJA1021T/20/C - LIN 2.1 Transceiver, 20kBd, 8-SO | NXP
TJA1021T/20/C

TJA1021T/20/C - LIN 2.1 Transceiver, 20kBd, 8-SO | NXP

The NXP TJA1021T/20/C is a single-wire LIN (Local Interconnect Network) bus transceiver that operates as the physical interface between a LIN protocol controller and the physical bus in in-vehicle sub-networks. The /20 variant supports baud rates from 1 kBd up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. It is housed in an 8-pin SO (SOIC-8) surface-mount package and is pin-to-pin compatible with the legacy TJA1020 and NXP MC33662(B) LIN transceivers. What is a LIN transceiver? A LIN transceiver is a physical-layer (PHY) device that translates the low-voltage digital logic signals (TXD/RXD) generated by a microcontroller or LIN controller into the single-wire, dominant/recessive, slew-rate-controlled bus waveform defined by the LIN standard. It handles bus fault protection (short to battery, short to ground, load-dump), ESD protection, thermal shutdown, and wake-up detection via the bus line. The LIN protocol is widely used as a low-cost sub-bus for non-critical automotive body electronics (mirror controls, seat adjusters, door modules, roof consoles), where CAN would be over-spec. Key features of the TJA1021T/20/C include an integrated slew-rate-controlled LIN bus driver that meets the LIN 2.1/SAE J2602 wave-shaping requirements with minimized electromagnetic emissions (EME), improved ESD robustness compared to the TJA1020, a -27 V to +40 V wide bus load-dump protection range, low-power sleep mode with remote wake-up via the LIN pin, and a dedicated TXD dominant time-out to prevent the bus from being permanently driven. Architecturally, the TJA1021T/20/C uses a bipolar high-voltage process for the bus-side driver stage combined with low-voltage CMOS logic on the protocol-side (TXD, RXD, EN, WAKE). The integrated pull-up resistor on the bus line and the internal slope-control feedback loop produce the trapezoidal LIN waveform specified by SAE J2602, eliminating the need for an external diode or waveform-shaping RC network. Built-in fail-safe features include loss-of-bat handling, ground-shift tolerance, and under-voltage reset on VCC. Typical applications include automotive body-control modules, LIN slaves for door/window/seat/steering-column control, HVAC flap motors, mirror adjusters, ambient lighting nodes, and rain/light sensors. Because the part is qualified to the AEC-Q100 automotive reliability standard, it is designed for the harsh electrical environment of a 12 V automotive battery rail, including jump-start and load-dump transients. It also suits industrial LIN sub-buses where the LIN standard provides a simple, robust single-wire alternative to CAN or RS-485. When designing with this device, ensure the master resistor (typically 660 ohms pull-up to VSUP through a diode) and the bus capacitor (typically 220 pF to 1 nF) are correctly sized, and that the LIN node wake-up strategy (local wake via the WAKE pin vs remote wake via the bus) matches the application requirements.

RFQ رابطہ
TJA1021T/20/CM - 20 kBd LIN Transceiver | NXP
TJA1021T/20/CM

TJA1021T/20/CM - 20 kBd LIN Transceiver | NXP

The NXP Semiconductors TJA1021T/20/CM is a single LIN bus transceiver operating from 5.5 V to 27 V, with communication speeds from 1 kBd to 20 kBd, and it is packaged in an 8-pin SOIC. It interfaces an automotive LIN master or slave protocol controller with the physical LIN bus while supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016. A LIN transceiver, also called a LIN physical-layer interface, is a vehicle-network interface IC that converts digital controller signals into the dominant and recessive levels used on a LIN subnetwork. In the product hierarchy, a LIN transceiver belongs to the LIN bus interface family, which is part of automotive interface ICs and broader vehicle communication semiconductors. It is intended for low-cost, single-wire, in-vehicle subnetworks connecting sensors, actuators, switches, and electronic control units. The TJA1021T/20/CM provides a maximum specified LIN transmission speed of 20 kBd. Its optimized slew-rate control helps reduce electromagnetic emissions, an important consideration when the transceiver is placed beside motors, relays, solenoids, or other switching loads. The device also includes bus-fault protection, local wake-up, bus wake-up, TXD timeout protection, low-power mode, and thermal shutdown protection. The /20 speed grade is intended for LIN 2.x networks rather than the lower-speed 10.4 kBd grade. The TJA1021 is designed for both LIN master and LIN slave nodes and converts controller transmit data into a LIN bus signal. It also provides received bus data to the host controller. NXP identifies the family as pin-compatible with the TJA1020 and MC33662(B), enabling design migration within established LIN hardware. The TJA1021BT variant uses a later SOI3+ process and is identified as a pin-to-pin and hardware/software-compatible drop-in replacement for the TJA1021T/20. Typical applications include vehicle body and comfort modules, door controls, seat and lighting controllers, climate-control panels, sensor interfaces, ambient-temperature sensing, small motor and actuator controllers, and general automotive LIN subnets. The single-wire bus architecture and 20 kBd capability suit distributed networks where several low-cost nodes exchange commands and diagnostic data over one conductor. When laying out the circuit, place the transceiver and LIN interface protection components close to the connector and keep the LIN trace away from sensitive analog and high-speed digital routes. Confirm that the selected external transceiver protection supports the vehicle battery environment. If the host controller uses a voltage domain different from the transceiver supply, verify the RXD and TXD logic levels and the purpose of any VIO pin in the selected package variant before finalizing the schematic. This page combines the manufacturer electrical and compatibility information with practical interface guidance, application-specific design context, a parameter comparison, and verified same-footprint alternatives. It is intended to help engineers evaluate the TJA1021T/20/CM for LIN 2.x automotive networks without overlooking speed grade, protection, protocol, or layout requirements.

RFQ رابطہ
TJA1021TK/10/C - LIN Transceiver | NXP Semiconductors
TJA1021TK/10/C

TJA1021TK/10/C - LIN Transceiver | NXP Semiconductors

The NXP Semiconductors TJA1021TK/10/C is an automotive LIN physical-layer transceiver supporting communication rates from 1 kBd to 20 kBd in an 8-pin HVSON package with a 3 x 3 mm footprint. It provides the interface between a LIN master or slave protocol controller and the physical LIN bus while supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 communication. A LIN transceiver is the physical-layer component of a Local Interconnect Network. The protocol controller generates the logical command and receive data, while the transceiver converts TXD logic into a shaped LIN bus signal and converts the bus voltage into RXD for the controller. The TJA1021 therefore belongs to the hierarchy of LIN transceiver, vehicle network interface IC, automotive interface IC, and semiconductor. The TJA1021 uses optimized slew-rate control and wave shaping to minimize electromagnetic emissions. It is pin-to-pin compatible with the TJA1020 and MC33662(B), according to the NXP manufacturer datasheet, and supports in-vehicle subnet architectures operating from 1 kBd through 20 kBd. These characteristics make it applicable to body electronics, comfort systems, lighting, door modules, seat controls, and other low-speed vehicle networks. The 8-pin HVSON construction supports compact PCB placement while providing the package area and pin arrangement expected for automotive network interfaces. The device provides separate communication-side and logic-side functions, allowing the protocol controller to remain isolated from the physical bus interface. Its bus-level shaping is important in distributed vehicle electrical systems where a rapidly switching signal could interfere with adjacent harnesses and electronic control units. The TJA1021 is appropriate for LIN master nodes, LIN slave nodes, body-control modules, climate-control electronics, lighting controllers, and sensor gateways. It can also support LIN-compatible industrial or transportation networks when the system design explicitly implements the LIN physical-layer specification. The manufacturer identifies the TJA1021TK family as end of life, so engineers should review availability and lifecycle requirements before starting a new design. For PCB implementation, follow the pin-description table and exposed-pad guidance in the manufacturer datasheet. Keep the LIN and supply connections compact, provide the required bus and supply decoupling, and review termination, pull-up, routing, and grounding against the final vehicle-network topology. Do not substitute a generic transceiver solely from its bus description; confirm package pinout, logic levels, sleep behavior, and automotive qualification. This page consolidates the device identity, LIN standards, operating-rate range, lifecycle information, package characteristics, verified drop-in relationship, and practical implementation considerations into one engineering reference. The most important sourcing action is to confirm the exact suffix, package variant, qualification level, and lifecycle plan before committing a production BOM.

RFQ رابطہ
TJA1022HGZ - Dual LIN 2.2A/SAE J2602 Transceiver DHVQFN-24 | NXP
TJA1022HGZ

TJA1022HGZ - Dual LIN 2.2A/SAE J2602 Transceiver DHVQFN-24 | NXP

The NXP Semiconductors TJA1022HGZ is a dual-channel LIN (Local Interconnect Network) 2.2A/SAE J2602 transceiver in a 24-pin DHVQFN (5.5 x 3.5 mm) exposed-pad package. It provides the physical-layer interface between a LIN master/slave protocol controller and the LIN bus, integrating two complete LIN transceivers in a single IC for in-vehicle sub-network applications operating at baud rates up to 20 kBd. A LIN transceiver is a physical-layer interface IC that converts the digital logic-level UART signals from a microcontroller into the dominant/recessive single-wire LIN bus protocol, while also providing bus protection against automotive transients, thermal shutdown, and ground-loss events. LIN fits into the vehicle networking hierarchy below CAN (Controller Area Network), serving as a low-cost sub-bus for body electronics, sensor clusters, and mechatronic modules where full CAN bandwidth is unnecessary. Key features include LIN 2.0/2.1/2.2/2.2A and SAE J2602 compliance, integrated slope control to limit EMI, low quiescent current in sleep mode for battery-friendly operation, an integrated 3.3 V or 5 V LDO providing microcontroller supply, and bus dominant-time-out protection. The DHVQFN-24 package with exposed thermal pad supports AEC-Q100 automotive qualification and a wide operating temperature range, with the dual-channel integration saving PCB area and BOM cost. The architecture uses two independent LIN physical-layer channels sharing a common VCC and battery supply pin. Each channel combines a current-driven LIN driver with dominant/recessive slew-rate control, a high-voltage bus pin tolerant of automotive load-dump events, a wake-up receiver for sleep-mode recovery, and a local 5V/3.3V LDO that can power a host microcontroller. Internal fault handling includes thermal shutdown, bus dominant-time-out, and loss-of-ground/battery protection meeting automotive EMC and ESD requirements. Typical applications include automotive body control modules (window lift, door module, seat control), HVAC blower and lighting modules, steering column switches and column integration modules, sensor clusters and rain/light sensors, and other LIN-attached mechatronic nodes. Pin compatibility with TJA1024 (in the same DHVQFN24 footprint) simplifies platform reuse across LIN and CAN sub-networks. When designing with this device, ensure the exposed thermal pad is soldered to a sufficient copper pour for thermal dissipation, and follow the bus-protection network (typically a reverse-polarity diode and bulk capacitor on VBAT) recommended in NXP application notes. The dual-channel integration is best exploited by assigning each channel to a different LIN sub-network on the same ECU.

RFQ رابطہ
TJA1022TK - Dual LIN 2.2A Transceiver HVSON14 | NXP
TJA1022TK

TJA1022TK - Dual LIN 2.2A Transceiver HVSON14 | NXP

The NXP Semiconductors TJA1022TK is a dual LIN (Local Interconnect Network) transceiver in a 14-pin HVSON (3x4.5 mm) package that provides the physical-layer interface between a LIN protocol controller and the LIN bus. It supports baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and SAE J2602, making it suitable for in-vehicle subnetwork applications. The device integrates two independent LIN transceiver channels, each capable of leader or follower operation with built-in slope control for EMI compliance. A LIN (Local Interconnect Network) transceiver is a physical-layer IC that converts the digital logic-level signals from a microcontroller's protocol controller into the single-wire LIN bus voltage levels defined by the LIN standard, and vice versa. LIN sits below CAN in the automotive networking hierarchy (sub-bus: LIN -> sub-bus of CAN -> in-vehicle network), enabling low-cost communication for body electronics such as door modules, seat controllers, mirror adjusters, and roof consoles. The TJA1022's dual-channel integration halves the cell density on the PCB versus two discrete transceivers. Key features include an operating supply voltage range typically suitable for 12 V automotive systems, integrated LIN bus termination, thermal shutdown protection, bus pin transient protection per ISO 7637, and very low quiescent current in sleep mode for battery-friendly standby. The device supports both normal and silent-mode operation for selective wake-up scenarios. Per the NXP datasheet, the TJA1022T and TJA1022TK are pin-compatible with the legacy TJA1020, TJA1021, TJA1027, and TJA1029 single LIN transceivers in SO14 / HVSON14 packages. The TJA1022TK architecture combines two independent LIN physical-layer blocks sharing common supply and ground pins. Each channel includes a wave-shaping driver with controlled slew rate to meet LIN EMC requirements, a dominant-timer for bus lock-up protection, and a wake-up receiver. The HVSON14 exposed pad provides a low thermal resistance path, essential for engine-bay and under-hood modules where ambient temperatures can reach 125 C. Typical applications include automotive body-electronics modules (door, seat, mirror, roof), HVAC control panels, steering-wheel button interfaces, LED lighting controllers, and powertrain sensors connected to a body-domain LIN sub-bus. The dual-channel integration is especially valuable in door-modules and seat-modules where multiple LIN sub-nets reduce harness weight and BOM cost. When designing with this part, follow NXP's reference layout guidance: place the HVSON14 exposed pad on a continuous ground copper pour with multiple thermal vias, keep the LIN bus traces short, and add the recommended external reverse-battery and ESD protection on the LIN pins if the module is exposed to handling transients. This page synthesizes distributor pricing, pin-compatible NXP family alternatives, and practical PCB/layout notes not found in the manufacturer datasheet, accelerating BOM decisions for automotive LIN sub-network designs.

RFQ رابطہ
TJA1024HG - Quad LIN 2.2A/SAE J2602 Transceiver | NXP
TJA1024HG

TJA1024HG - Quad LIN 2.2A/SAE J2602 Transceiver | NXP

The NXP Semiconductors TJA1024HG is a quad LIN (Local Interconnect Network) 2.2A/SAE J2602 transceiver housed in a 24-pin DHVQFN (SOT815-1) package, providing the interface between a LIN master/slave protocol controller and the physical bus in a vehicle network. It comprises two independent and separated dual LIN transceiver channels, supports baud rates up to 20 kBd, and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and SAE J2602 standards. A LIN (Local Interconnect Network) transceiver is a physical-layer (PHY) interface IC that converts the digital UART/LIN protocol logic of a microcontroller into the single-wire LIN bus voltage/dominance signalling required by in-vehicle subnetworks. As a member of the automotive bus PHY hierarchy (LIN -> automotive network -> in-vehicle networking), the TJA1024 enables robust, low-cost serial communication between electronic control units (ECUs) in body, comfort and chassis domains where CAN bandwidth is unnecessary. The quad-channel architecture in a single chip is designed to consolidate four LIN physical interfaces that previously required two TJA1027 dual transceivers, saving PCB area in body-control modules, gateway ECUs and HVAC/seat/mirror node clusters. Key features of the TJA1024HG include integrated slope control for low electromagnetic emissions (EME), advanced low-power management with a Sleep mode current typically below 10 uA, overtemperature protection with graceful thermal shutdown, bus dominant time-out protection to prevent single-wire bus lock-up, and software compatibility with the TJA1022, TJA1027 and TJA1029 LIN transceivers. The two dual-channel blocks can be configured independently so one half of the IC can be left in Sleep while the other remains active for partial-networking designs. The TJA1024HG uses a bipolar/BiCMOS output stage that delivers up to 2.2 A peak drive capability on the LIN bus, supporting remote wake-up via bus-pattern recognition and short-to-battery/ground protection on the LIN pin. Internal pull-ups and current limiting on each LIN line minimise external component count, while a reset/INH output can be used to control an external voltage regulator for power-sequenced ECU designs. Typical applications for the TJA1024HG include automotive body-control modules, HVAC and seat-control ECUs, door/window/liftgate modules, steering-column switches, mirror controllers, ambient-light and lighting nodes, and LIN-based sensor actuator interfaces (e.g. smart MOSFET pre-drivers, rain/light sensors). Its 24-pin DHVQFN package is footprint-compatible with prior NXP LIN families and AEC-Q100 qualified, making it well-suited for 12 V automotive in-cabin and under-hood environments. When designing with the TJA1024HG, ensure the VBAT supply is properly decoupled close to the IC and that the LIN master pull-up resistor value matches the chosen bus data rate and total network capacitance; adding a reverse-battery protection diode and TVS on VBAT is standard practice for 12 V automotive power rails. Use NXP's TJA1024 application note and reference design for layout guidelines and EMC-compliant bus routing. This page synthesises distributor pricing, drop-in and pin-compatible alternatives, design notes and a parametric comparison table not aggregated in the manufacturer datasheet, giving engineers a single source for selection, sourcing and design-in.

RFQ رابطہ
TJA1024HGZ - Quad 20 kBd LIN 2.2A Transceiver | NXP
TJA1024HGZ

TJA1024HGZ - Quad 20 kBd LIN 2.2A Transceiver | NXP

NXP Semiconductors TJA1024HGZ is a quad LIN 2.2A/SAE J2602 transceiver for in-vehicle subnetworks operating at baud rates up to 20 kBd, housed in a 24-lead DHVQFN package measuring 5.5 mm by 3.5 mm. The device supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, and SAE J2602 requirements identified in the supplied source data. A LIN transceiver, also called a LIN bus interface controller, is an integrated circuit that connects a host-side serial controller to a physical LIN subnetwork. It belongs to the hierarchy of bus interface IC, communication transceiver, vehicle network interface, and semiconductor. The TJA1024HGZ integrates four LIN channels, allowing one controller to connect to multiple low-speed vehicle-network nodes while retaining individual fault-management capabilities. The TJA1024 family converts controller-generated data streams into LIN bus signals shaped to reduce electromagnetic emissions, as stated in the NXP datasheet excerpt. Its LIN bus outputs are pulled high through internal termination resistors. The part is software compatible with the TJA1022, TJA1027, and TJA1029, making it useful when an established LIN protocol stack must connect to this physical-layer transceiver. This transceiver is intended for automotive and other LIN-capable subnetwork systems using communication rates up to 20 kBd. Potential circuit roles include body electronics, seat and door modules, climate-control interfaces, lighting controllers, and sensor gateways. The integrated quad-channel architecture can reduce the number of separate single-channel transceivers required on a controller board. Design work should verify supply voltage, pin mapping, bus termination, transceiver enable/control behavior, fault handling, and signal integrity against the complete manufacturer datasheet before layout release. The supplied distributor record identifies a 5 V to 18 V operating feature, while detailed electrical limits, timing values, thermal limits, and pin names were not included in the verified excerpts and therefore remain unconfirmed here. This product page combines the supplied manufacturer, distributor, and cross-reference evidence with practical engineering guidance. It distinguishes verified LIN standards and package information from unavailable specifications, helping designers identify the correct interface function without treating CAN alternatives as pin-compatible replacements.

RFQ رابطہ
TJA1027T/20/1J - 20 kBd LIN 2.2A Transceiver | NXP
TJA1027T/20/1J

TJA1027T/20/1J - 20 kBd LIN 2.2A Transceiver | NXP

The NXP Semiconductors TJA1027T/20/1J is a single-channel LIN bus transceiver operating at up to 20 kBd, with a 5 V to 18 V supply range and an 8-pin SOIC package. It is intended to connect an automotive LIN master or slave protocol controller to the physical LIN sub-network and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. A LIN transceiver is the physical-layer interface between a microcontroller-based LIN node controller and the wired LIN bus. It converts controller transmit commands into a shaped bus signal, receives bus states for the controller, and provides the voltage translation and bus termination needed in an automotive low-speed serial network. The TJA1027 belongs to the interface IC and automotive communication transceiver hierarchy. The TJA1027T/20/1J supports LIN 2.0 through LIN 2.2A operation and SAE J2602 network requirements. Its transmit path creates an optimized LIN waveform intended to minimize electromagnetic emissions, while the LIN bus output is pulled high through an internal termination resistor. The 20 kBd operating rate supports typical in-vehicle LIN sub-networks rather than high-speed communication links. NXP identifies the TJA1027 as pin-compatible with the TJA1020 and TJA1021, and the broader datasheet compatibility statement also identifies TJA1022 and TJA1029 compatibility. Its 8-pin SOIC package supports conventional surface-mount assembly, while the automotive qualification designation supports use in vehicle electronic control units when the complete system requirements call for an automotive-grade component. Typical applications include LIN-controlled vehicle body modules, seat and door controllers, climate-control panels, switch-bank electronics, ambient-light sensors, and other low-speed vehicle sub-networks. In each case, the transceiver provides the physical bus interface while a separate LIN protocol controller or LIN-capable microcontroller handles frames, scheduling, diagnostics, and higher-layer communication. Designers should account for the transceiver and controller supply domains, LIN bus pull-up resistance, ground reference quality, waveform timing, EMC layout, and unused-pin treatment. The 5 V to 18 V operating range does not remove the need to protect the LIN line against automotive transients; the bus network must be evaluated using the application’s voltage, ground-offset, slew-rate, and fault-recovery requirements. This product page combines NXP protocol and compatibility information with package-focused alternatives, selection guidance, and implementation considerations. It distinguishes true pin-compatible options from merely similar LIN devices and highlights the operating conditions that should be checked before replacing an existing TJA1027 implementation.

RFQ رابطہ
TJA1027T/20/2Z - LIN 2.2A Automotive Transceiver | NXP
TJA1027T/20/2Z

TJA1027T/20/2Z - LIN 2.2A Automotive Transceiver | NXP

The NXP Semiconductors TJA1027T/20/2Z is an automotive LIN transceiver designed for in-vehicle sub-networks operating at baud rates up to 20 kBd. It operates from a 5 V to 18 V supply and is housed in an 8-pin SO package. The device interfaces a LIN leader or follower protocol controller with the physical LIN bus and supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V systems. A LIN transceiver is the physical-layer interface between a microcontroller-based LIN protocol controller and a low-speed vehicle network. It converts the controller's transmit and receive signals into the standardized LIN bus waveform and presents received bus data to the controller. The TJA1027 belongs to the broader hierarchy of automotive network transceivers, bus-interface ICs, interface ICs, and semiconductors. The TJA1027 is optimized for electromagnetic-emission control and includes an internal pull-high arrangement on the LIN output. According to the NXP manufacturer datasheet, its transmit data stream is converted into an optimized bus signal intended to minimize electromagnetic emissions. The device also provides pin compatibility with the TJA1020 and TJA1021, allowing evaluation of functional alternatives within the same 8-pin footprint. Automotive qualification information, exact absolute maximum ratings, current consumption, slew-rate limits, and detailed timing values should be confirmed in the manufacturer datasheet before a production release. The /20 ordering variant identifies a specific temperature and packaging configuration, while /2Z is the reeled ordering suffix. These ordering codes should not be changed without checking the associated NXP ordering information and labeling requirements. Typical applications include LIN sub-networks in body-control modules, seat and door controllers, climate-control panels, lighting modules, sensor gateways, and other automotive electronic control units. Because LIN is a single-wire, low-speed network, the transceiver also needs correct board-level bus termination, grounding, protection, and decoupling to maintain signal integrity in electrically harsh vehicle environments. Keep the transceiver supply and ground connections compact on the PCB, and route the LIN connection to minimize sensitive-loop area. Add the manufacturer's recommended decoupling and protection components near the device, and verify that the external bus network complies with LIN 2.2A and SAE J2602 timing requirements. This page combines exact product facts, interface standards, pin-compatible alternatives, comparison guidance, and practical PCB considerations to support component selection, cross-reference work, and PCB design for LIN 2.2A automotive networks.

RFQ رابطہ
TJA1027TK/20 - 20 kBd LIN Transceiver | NXP Semiconductors
TJA1027TK/20

TJA1027TK/20 - 20 kBd LIN Transceiver | NXP Semiconductors

The NXP Semiconductors TJA1027TK/20 is a LIN 2.x physical-layer transceiver designed for automotive sub-networks operating at baud rates up to 20 kBd. The device is supplied in an 8-HVSON package with a 3 x 3 mm footprint. It is intended to interface a LIN master or slave protocol controller with the physical LIN bus, providing the communication link between the controller and vehicle sub-network. A LIN transceiver is a physical-layer interface IC that converts logic-level controller signals into the voltage-based signaling used by a LIN bus, while receiving and conditioning bus signals for the protocol controller. The TJA1027 family is associated with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V vehicle systems. These standards define the electrical behavior, timing, fault handling, and interoperability expectations of LIN vehicle networks. The TJA1027TK/20 is specifically identified as pin-compatible with the TJA1020 and TJA1021. The cross-reference information also identifies compatibility with the TJA1022, TJA1029, and MC33662 families. This makes the device relevant to designs where an existing LIN transceiver footprint and software architecture must be retained while introducing a LIN 2.x-compatible interface. The 20 kBd operating limit is appropriate for conventional in-vehicle subnetworks rather than high-speed communication links. The 8-HVSON package supports compact board layouts in automotive electronic control units, body modules, door-control units, and other distributed vehicle systems. The package dimensions, exposed thermal pad, and pin arrangement should be matched to the manufacturer land-pattern and thermal recommendations. The LIN bus wiring also requires correct termination, common-reference handling, and protection appropriate to the vehicle electrical environment. For practical implementation, follow the pin-description table, recommended external components, bus-loading limits, and application schematic in the NXP TJA1027 datasheet. Pay particular attention to the distinction between the logic-side supply, ground connections, transceiver enable behavior, and LIN bus connection when assigning PCB tracks. Validate the assembled design with the applicable ISO 17987, SAE J2602, and LIN conformance requirements. This page combines manufacturer protocol and package information with verified sourcing data, engineering selection guidance, drop-in replacement context, and practical PCB and integration considerations for engineers evaluating the TJA1027TK/20 in LIN-based automotive systems.

RFQ رابطہ
TJA1027TK/20/1 - LIN 2.2A Transceiver | NXP
TJA1027TK/20/1

TJA1027TK/20/1 - LIN 2.2A Transceiver | NXP

NXP Semiconductors TJA1027TK/20/1 is an automotive LIN bus transceiver supporting data rates up to 20 kBd in an 8-pin HVSON package with a 3 mm by 3 mm body size. It is intended for in-vehicle sub-networks and complies with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 (12 V) requirements. A Local Interconnect Network transceiver is the physical-layer interface between a LIN protocol controller and the vehicle's LIN wiring. It combines the bus transmitter, receiver, voltage-domain conversion, and protection functions required to connect a microcontroller-based master or slave node to a low-cost, single-wire automotive network. LIN belongs to the broader hierarchy of automotive interface ICs, communication transceivers, interface ICs, and semiconductors. Key characteristics include operation at up to 20 kBd, compatibility with LIN 2.0 through LIN 2.2A, and compliance with SAE J2602 and ISO 17987-4:2016 for 12 V systems. The TJA1027 is pin-compatible with the TJA1020 and TJA1021 families, making it useful when a design must consolidate LIN transceiver sourcing while retaining the established physical footprint and board-level implementation. The TJA1027 integrates the LIN physical-layer transmitter and receiver with logic-side supply support, allowing a protocol controller to communicate through the vehicle LIN bus. Its compliance targets cover both LIN 2.2A and SAE J2602 requirements, providing a defined basis for automotive sub-network designs. Exact operating limits, electrical thresholds, bus-loading limits, and transceiver timing should be checked against the manufacturer datasheet for the selected ordering code. Typical uses include LIN master nodes, LIN slave nodes, body-control modules, seat and door modules, climate-control peripherals, switch interfaces, sensors, and lighting modules. The device is particularly relevant to 12 V vehicle architectures operating below the protocol's 20 kBd maximum baud rate, where standardized LIN physical-layer behavior and compact package size simplify harness-based sub-networks. When laying out the circuit, follow the pin-description table and recommended application circuit in the manufacturer datasheet. Pay particular attention to transceiver supply connections, ground return, LIN bus routing, external bus-interface components, and protection requirements. PCB signal integrity and automotive EMC performance depend on keeping the bus path compact and following the manufacturer's reference layout. This product page combines NXP protocol-compliance information, drop-in family options, application guidance, and practical design notes to support component selection and PCB planning. It is intended to help engineers identify whether the TJA1027TK/20/1 matches the required LIN standard, package, bus rate, and automotive integration constraints.

RFQ رابطہ
TJA1028T/3V3/20/1J - 3.3V LIN Transceiver | NXP
TJA1028T/3V3/20/1J

TJA1028T/3V3/20/1J - 3.3V LIN Transceiver | NXP

NXP Semiconductors TJA1028T/3V3/20/1J is a LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 12 V-compliant interface IC that integrates a LIN transceiver and a low-dropout 3.3 V voltage regulator. The regulator can supply up to 70 mA, while the transceiver provides the physical-layer interface for compact Local Interconnect Network nodes. The device is housed in an 8-pin SOIC package. A LIN transceiver is a bus-interface semiconductor that converts logic-level transmit and receive signals into the physical signals used by a Local Interconnect Network. The TJA1028 combines that interface function with a local voltage-regulator function, reducing the component count in nodes that need both LIN communications and a low-current 3.3 V supply. Its compliance with LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 supports use in standardized 12 V vehicle-network architectures. The principal feature of the TJA1028T/3V3/20/1J is its integrated low-dropout regulator, which delivers up to 70 mA and is configured for 3.3 V output. The ordering code identifies the 3.3 V regulator variant in the 8-pin SOIC package. The LIN interface is designed for compact local nodes, while the integrated regulator supplies nearby low-current circuitry without requiring a separate discrete regulator package. The architecture places the LIN physical interface and regulated supply in one 8-pin SOIC device. This consolidation can shorten PCB routing between the bus transceiver and local power circuit while reducing the number of external components. The LIN-side implementation supports robust 12 V vehicle-network operation, including strong electrostatic-discharge performance and tolerance of high voltages on the LIN bus as described by NXP. Typical applications include LIN master or slave nodes in vehicle body and comfort systems, seat and door modules, climate-control interfaces, switch and sensor nodes, and compact automotive subsystems. It is also suitable for LIN-based actuator controllers and low-current ECU peripherals that can use the integrated 3.3 V rail. The 70 mA regulator capability should be checked against the total load, including local logic and transceiver requirements. For PCB design, use the manufacturer pin-description table when assigning all eight SOIC pins and follow the recommended input, output and bus-decoupling arrangement. Keep the LIN connection away from sensitive analog or high-speed digital traces, provide the required protection and common-mode components specified in the datasheet, and account for voltage drop and regulator headroom across the complete 12 V automotive supply range. This product page combines the NXP device description, standard-compliance information, package details, commercial sourcing guidance, and application-focused design guidance. It also distinguishes exact functional alternatives from variants that change the regulated output voltage, helping engineers avoid substitutions that are not electrically interchangeable.

RFQ رابطہ
TJA1028T/3V3/20:11 - 3.3V LIN Transceiver | NXP
TJA1028T/3V3/20:11

TJA1028T/3V3/20:11 - 3.3V LIN Transceiver | NXP

The NXP Semiconductors TJA1028T/3V3/20:11 is a 3.3 V LIN 2.0/2.1 bus transceiver with an integrated low-dropout voltage regulator, a supply current of 850 uA, and a 6 us transceiver performance figure, housed in an 8-pin SOIC package. The integrated regulator can deliver up to 70 mA, allowing the device to support compact local interconnect network nodes without requiring a separate 3.3 V regulator. A LIN transceiver is an interface integrated circuit that connects a low-speed serial bus to a host microcontroller. LIN belongs to the vehicle network hierarchy alongside CAN, Ethernet, and other automotive communication buses. Its lower signaling complexity makes it useful for distributed switches, sensors, lamps, actuators, door modules, and other body electronics. The TJA1028 combines this physical-layer interface with local regulated power, reducing component count in space-constrained automotive nodes. The TJA1028 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. This 3.3 V version provides a regulated 3.3 V output for local circuitry, while the product family is also available in a 5.0 V regulator configuration. NXP identifies strong electrostatic-discharge robustness as a design feature, an important consideration for wired vehicle networks exposed to connector transients and conducted disturbances. The 850 uA supply current in the product listing supports low-quiescent-current operation in parked or partially active vehicle systems. The manufacturer's datasheet also identifies a 6 us transceiver specification, while the integrated regulator provides up to 70 mA for a local load. These characteristics make the TJA1028 useful when the communication interface and a small regulated supply share the same compact electronic control unit. Typical uses include LIN door modules, seat and lighting controllers, climate-control subnodes, body control interfaces, and compact automotive sensor nodes. The device can reduce board area by combining the LIN transceiver and regulator while retaining standardized LIN bus behavior. Its 8-pin SOIC package also simplifies assembly and inspection compared with larger automotive interface packages. The main design consideration is to allocate the integrated regulator's 70 mA capability carefully and to maintain the bus, ground, and supply connections required by the manufacturer's application guidance. Decoupling, protection, PCB return paths, and LIN waveform verification remain essential because the transceiver operates in electrically harsh vehicle environments. This product record combines the manufacturer's functional information with package details, compatible family variants, application guidance, and design considerations to support faster component selection and PCB planning.

RFQ رابطہ
TJA1028T/5V0/10 - 5V LIN Transceiver with Regulator | NXP
TJA1028T/5V0/10

TJA1028T/5V0/10 - 5V LIN Transceiver with Regulator | NXP

The NXP Semiconductors TJA1028T/5V0/10 is a LIN 2.0 and LIN 2.1 bus transceiver with an integrated low-dropout voltage regulator, a 5.0 V regulator output, and an 8-pin SOIC package. The LIN bus interface supports communication rates up to 10 kbit/s, while the integrated regulator can supply up to 70 mA for local node electronics. Its operating supply range is 5.5 V to 28 V DC. A LIN transceiver is an interface integrated circuit that connects a microcontroller or application processor to the wired- LIN, or Local Interconnect Network, bus. It combines a physical-layer bus driver and receiver with logic-compatible transmit and receive signals. A local interconnect network falls within the broader automotive and industrial communication hierarchy: LIN bus transceiver, wired network interface, interface IC, and semiconductor. The TJA1028 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. The integrated regulator provides a nominal 5.0 V output with a listed 4.9 V to 5.1 V range, reducing the number of external power components needed at a compact LIN node. The transceiver architecture also supports half-duplex LIN communication and strong electrostatic protection. The 8-SO package makes the TJA1028 suitable for compact modules, electronic control units, sensors, and actuator nodes. Its integrated supply architecture is particularly useful when the bus-powered electronics require a stable local rail but the available system voltage varies. The regulator output should not be treated as a general-purpose high-current power source because its specified capability is limited to 70 mA. Use the LIN and RXD connections according to the manufacturer pin-description table, and connect the TXD signal to a compatible microcontroller serial interface. The transceiver requires suitable bus termination and external decoupling in accordance with the manufacturer application circuit. Consider power-state behavior, ground strategy, and the regulator load requirement before laying out the PCB. This product overview combines bus-standard compliance, regulator capability, package details, drop-in alternatives, and practical PCB guidance to support faster component selection. It also distinguishes direct NXP family replacements from choices that require different regulator output or package considerations.

RFQ رابطہ
TJA1028T/5V0/20/1J - 5V LIN Transceiver with 70mA Regulator
TJA1028T/5V0/20/1J

TJA1028T/5V0/20/1J - 5V LIN Transceiver with 70mA Regulator

NXP Semiconductors TJA1028T/5V0/20/1J is a LIN bus transceiver with an integrated 5.0 V low-dropout voltage regulator, a maximum regulator output current of 70 mA, and a 20 kbit/s LIN data rate in an 8-pin SOIC package. It is designed for compact Local Interconnect Network nodes that need both bus communication and a local 5 V supply. A LIN transceiver is an integrated bus interface that combines a physical-layer transmitter and receiver with the logic-level control and status functions required by Local Interconnect Network nodes. The TJA1028 belongs to the LIN transceiver hierarchy within vehicle and industrial interface semiconductors, while its internal regulator makes it a Mini System Basis Chip for space-constrained LIN nodes. The device complies with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Its 5.0 V regulator variant can supply up to 70 mA, allowing external circuitry such as sensors, logic, or communication interfaces to use the same local supply. The 20 kbit/s bus rate matches conventional LIN application rates, while the integrated regulator reduces the number of discrete components required in compact modules. The TJA1028 is designed to withstand high voltages present on a LIN bus and provides strong electrostatic-discharge performance for robust vehicle electronics. These protections are particularly important because LIN cables can connect remote nodes through long harness runs where external transients and electrostatic discharge events are more likely. The integrated regulator also requires correct input and output capacitors to maintain stable voltage regulation and acceptable transient performance. Typical applications include LIN slave nodes in automotive body modules, seat and door controllers, climate-control submodules, sensor interfaces, lighting modules, and industrial LIN gateways. A 20 kbit/s communication rate is suitable for low-bandwidth command and status traffic rather than high-speed data transfer. The 5 V output is appropriate for low-power sensors, small controllers, logic blocks, and peripheral circuits that operate within the regulator's 70 mA capability. For a robust PCB implementation, route the LIN connection away from sensitive analog paths, use the recommended ground-plane connection, and place the regulator input and output capacitors close to their associated pins. Confirm the external load current, bus termination strategy, wake-up requirements, and fault-management behavior against the manufacturer datasheet. Do not exceed the regulator or transceiver limits when adding external loads. This page combines the verified TJA1028T/5V0/20/1J specifications with package guidance, application-oriented circuit considerations, and confirmed drop-in alternatives. It also provides a practical comparison for engineers evaluating replacements without changing the SO-8 PCB footprint.

RFQ رابطہ
TJA1028T/5V0/20:11 - 20 kbaud LIN Transceiver | NXP
TJA1028T/5V0/20:11

TJA1028T/5V0/20:11 - 20 kbaud LIN Transceiver | NXP

The NXP Semiconductors TJA1028T/5V0/20:11 is a LIN 2.0/2.1 transceiver with an integrated 5.0 V low-drop voltage regulator, 20 kbaud bus operation, and an SO-8 surface-mount package. The integrated regulator can supply up to 70 mA, reducing the component count required for compact LIN nodes while retaining a regulated 5.0 V rail for local circuitry. A LIN transceiver is an interface IC that connects a microcontroller or other host controller to a low-cost, single-wire Local Interconnect Network bus. Within the product hierarchy, the TJA1028 belongs to the LIN transceiver family, which falls under communication transceivers, interface ICs, and integrated semiconductor devices. LIN buses commonly connect vehicle body modules, sensors, switches, actuators, and door or lighting controls over a slow, robust serial network. The device supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Its 5.0 V regulator variant has a 4.9 V to 5.1 V output range, while the 20 kbaud ordering code identifies the bus-speed configuration. The SO-8 package supports surface-mount assembly, and the 6 microsecond propagation-delay value allows reliable signal timing in typical automotive body-electronics networks. The integrated regulator is a low-drop design intended to operate from the vehicle battery while providing a local 5.0 V supply. This architecture helps create compact LIN nodes without a separate discrete regulator. Because the regulator can deliver only 70 mA, the load must remain within that limit, and supply pins still require appropriate local filtering and protection for automotive transients. Typical uses include LIN door modules, seat and window controls, climate-control panels, body-control sensor interfaces, switch modules, and compact industrial LIN nodes. The 70 mA regulator output can support low-power sensors and control electronics, although it should not be used to power high-current actuators, lamps, or motors. When laying out the circuit, keep the LIN-bus connection physically separated from sensitive analog or high-speed digital traces, follow the application circuit shown in the NXP datasheet, and validate the external component values for the intended network. Check the regulator load current and supply decoupling before adding additional local loads. This page brings together the manufacturer specifications, verified distributor availability information, practical design notes, and drop-in replacement analysis. It also explains the functional differences between documented TJA1028 variants so engineers can select the correct ordering code without relying on incomplete distributor summaries.

RFQ رابطہ
TJA1028TK/3V3/10:1 - 3.3V LIN Transceiver | NXP
TJA1028TK/3V3/10:1

TJA1028TK/3V3/10:1 - 3.3V LIN Transceiver | NXP

NXP Semiconductors TJA1028TK/3V3/10:1 is a LIN 2.0 and 2.1 automotive transceiver with an integrated low-dropout voltage regulator, a 3.3 V regulator output, and a 10:1 bus-slope threshold ratio in an 8-HVSON 3 x 3 mm surface-mount package. The integrated regulator can supply up to 70 mA, reducing the component count required for compact LIN nodes. A LIN transceiver, or Local Interconnect Network transceiver, connects a low-speed serial network node to a vehicle electrical network. The LIN bus belongs to the broader vehicle networking hierarchy, where simple sensors and actuators share a communication backbone with higher-bandwidth vehicle networks. The TJA1028 combines physical-layer signaling with local regulated power, positioning it between standalone LIN transceivers and larger system-basis-chip solutions. Key features include LIN 2.0 and LIN 2.1 operation, compliance with SAE J2602 and ISO 17987-4:2016 for 12 V systems, a 3.3 V regulated output, and an integrated regulator rated up to 70 mA. The 10:1 ordering suffix identifies the device threshold configuration. Its 8-HVSON package is designed for compact surface-mount assemblies where board area, EMC behavior, and short return paths are important. The integrated regulator allows a transceiver node to derive a local 3.3 V rail from the vehicle supply while preserving a single LIN bus connection. The regulator and transceiver share a compact package, but their functions remain distinct: the transceiver handles bus-level transmit and receive signaling, while the regulator supports local loads. This separation makes the device suitable for small sensor, actuator, and body-control nodes that do not require a complete system-basis chip. Typical applications include LIN-controlled vehicle lamps, door modules, seat controls, climate-control peripherals, and compact motor or sensor interfaces. The 3.3 V output is particularly useful for a microcontroller, signal-conditioning circuit, or digital sensor that requires a stable low-voltage rail beside a LIN physical interface. Using one IC for communication and local power reduces PCB area and assembly cost. PCB implementation should preserve a direct, short LIN connection and follow the manufacturer layout guidance for the HVSON exposed pad and supply decoupling. Confirm the regulator's thermal performance at the expected ambient temperature and ensure that its 70 mA capability is not shared with loads outside the intended design. The manufacturer datasheet pin-description table should be used for exact pad and exposed-pad assignments. This product page combines the exact ordering information, LIN compliance details, regulator capability, package characteristics, application guidance, and drop-in-family analysis needed to evaluate the TJA1028TK/3V3/10:1 before schematic and PCB sign-off.

RFQ رابطہ