DS90CR562MTDX - 18-Bit LVDS FPD Receiver | Texas Instruments
MPN: DS90CR562MTDX ✓ فعالDS90CR562MTDX جائزہ
The DS90CR562MTDX is identified as an IC line receiver in a 48-pin TSSOP package with gull-wing leads and a rectangular body. Its commercial temperature grade supports design use in ordinary commercial equipment rather than automotive or extended-temperature systems. The X suffix denotes the ordered package configuration, while the related DS90CR562MTD and DS90CR562MTD/NOPB listings identify the same receiver family in the same 48-TSSOP format.
The central benefit of this receiver is integration: an 18-bit wide LVDS-style panel interface consolidates multiple data bits into one display-link receiver rather than requiring a separate single-channel line receiver for every signal. In an FPD system, it complements a parallel-to-differential transmitter that converts low-speed logic signals into a compact differential link. This reduces interconnect width while supporting a more structured approach to display timing and data transfer.
Because the part is a receiver rather than a display timing controller or transmitter, system design must also account for the source transmitter, connector, cable, termination network, and receiving display electronics. LVDS-style links depend on correct differential routing, controlled impedance, suitable input termination, and compliant timing margins. Trace length and pair geometry are therefore as important as nominal pin compatibility when the receiver is installed.
DS90CR562MTDX is appropriate for commercial flat-panel-display equipment, monitor interfaces, industrial display controllers, and other systems using the TI DS90CR562 display-link ecosystem. It should not be selected for an unrelated LVDS standard merely because the connector or protocol looks similar; signal mapping, input thresholds, supply requirements, and timing must match the associated transmitter.
This page combines the exact package and product classification, sourcing links, interface guidance, and drop-in comparison with practical board-level cautions. For a new layout, consult the pin-description table and timing information in the manufacturer datasheet, preserve the receiver’s supply and ground distribution, and validate the complete transmitter-to-receiver link before production release.
کے لیے ڈراپ اِن متبادل DS90CR562MTDX — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
DS90CR562MTD/NOPB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DS90CR562MTDX تفصیلات
| Product Type | FPD interface line receiver |
| Data Width | 18 bit |
| Interface Standard | LVDS FPD link |
| Number of Terminals | 48 pins |
| Package Code | TSSOP-48 |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| ماؤنٹنگ ٹائپ | Surface mount |
| Temperature Grade | Commercial |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Receiver Channel Configuration | 18-bit wide receiver |
| Logic Family | LVDS |
| Manufacturer | Texas Instruments / National Semiconductor |
DS90CR562MTDX rectangular پن کنفیگریشن گائیڈ
DS90CR562MTDX (rectangular پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DS90CR562MTDX.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
DS90CR562MTDX کے لیے موزوں ہے 6 ایپلیکیشنs: Commercial Flat-Panel Monitor Interface, Industrial Panel Controller, Display Timing and Data Receiver Card, Medical Panel Display Interface, Point-of-Sale Display Terminal, Video Test and Measurement Equipment.
Commercial Flat-Panel Monitor Interface
The DS90CR562MTDX fits the receiving side of a commercial flat-panel link because it combines an 18-bit FPD receiver function with a 48-TSSOP surface-mount package and a 4.5 V to 5.5 V operating range. It can receive data from a compatible TI panel-link transmitter, reducing the number of separate point-to-point receiver paths needed for wide display words. The layout must preserve differential pair geometry, provide continuous ground references, and include local supply bypass close to the device. Commercial temperature-grade requirements should be checked against the monitor’s enclosure temperature.
تجویز کردہ
Industrial Panel Controller
For an industrial panel controller, the DS90CR562MTDX provides an 18-bit wide receiver block that can complement a TI display-link transmitter while operating from a 4.5 V to 5.5 V supply. Its integrated 18-bit receiving function supports a more compact panel interconnect than a collection of unrelated single-channel devices. The important design tradeoff is operating grade: the device is identified as commercial grade, so verify its manufacturer-rated temperature limits against the industrial enclosure. Validate the complete link over cable length, connector transitions, grounding, and worst-case timing.
تجویز کردہ
Display Timing and Data Receiver Card
The DS90CR562MTDX is suitable for a receiver card that separates panel-link reception from local display processing. Its 18-bit FPD interface and 48-TSSOP package let the card receive a compact differential data stream from a compatible transmitter while supplying organized data to downstream timing or pixel-processing logic. Because this IC does not perform scaling or timing generation, the system must divide transmitter, receiver, and controller functions correctly. Confirm pin-level data mapping and enable sequencing directly from the manufacturer pin table before schematic capture.
تجویز کردہ
Medical Panel Display Interface
The DS90CR562MTDX can be evaluated for a medical display interface when the system uses a compatible TI FPD link and the device remains within its commercial electrical and environmental limits. Its 18-bit receiver consolidates the display data path into one defined interface IC, while the 4.5 V to 5.5 V supply range supports conventional 5 V panel electronics. Medical use does not automatically confer medical qualification; the manufacturer’s operating limits, risk controls, and the system’s applicable requirements must be reviewed. Test long cable, connector, and grounding behavior before production use.
تجویز کردہ
Point-of-Sale Display Terminal
The DS90CR562MTDX is appropriate for a point-of-sale terminal that uses a dedicated differential panel link rather than routing wide parallel display signals through a cable. The 18-bit receiver can partner with a compatible DS90CF364A transmitter to carry display data across a more controlled interface. Its 48-TSSOP package supports compact, surface-mount assembly but requires careful thermal and signal-integrity layout. Keep the receiver supply quiet, connect grounds with a low-impedance path, and verify cable length and connector discontinuities against the manufacturer timing specifications.
تجویز کردہ
Video Test and Measurement Equipment
The DS90CR562MTDX can serve as the receiving element in test equipment that interfaces a compatible TI FPD transmitter to a display, controller board, or signal-analysis fixture. Its 18-bit width allows the interface to be exercised as a complete multi-bit link, and its 4.5 V to 5.5 V supply range is convenient for 5 V test fixtures. Use controlled cables and terminations, observe differential waveforms at the receiver, and confirm enable sequencing during power-up. The receiver’s commercial grade must also be matched to the intended bench or deployed environmental conditions.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DS90CR562MTDX — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DS90CR562MTD/NOPB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP | 48-TSSOP |
| Product Function | FPD interface line receiver | FPD interface line receiver |
| Data Width | 18 bit | 18 bit |
| Interface Type | LVDS FPD link | LVDS FPD link |
| Mounting Type | Surface mount | Surface mount |
اہم امتیازی خصوصیات
- Integrated 18-bit FPD receiver function (بمقابلہDS90CF364AMTDX/NOPB)
- Closest documented package-compatible receiver (بمقابلہDS90CR562MTD/NOPB)
- Nominal 5 V-class integration (بمقابلہDS90CR562MTD/NOPB)
ڈیزائن نوٹس
Route each differential receiver pair as a tightly coupled, continuously referenced pair with a consistent geometry and controlled impedance. Keep the DS90CR562MTDX close to the connector or transmitter interface, avoid stubs, and place any required termination network directly at the receiver pins. Do not route the link beneath noisy switching nodes. The 18-bit wide interface must be checked as a complete group of differential pairs because mismatched length or asymmetry can introduce skew even when individual nets appear correctly routed.
Provide a stable 4.5 V to 5.5 V supply at the DS90CR562MTDX and place local bypass capacitance close to the supply and ground pins. Keep return current out of the paths used by the differential receiver inputs. Verify startup current, supply tolerance, and ground bounce using the manufacturer electrical characteristics. Since the receiver sits at the end of a display link, supply noise can appear as receiver jitter or data errors even when the transmitter output itself is clean.
Do not treat any DS90CR-family 48-TSSOP device as an automatic substitute. The DS90CF364AMTDX/NOPB and DS90CR214MTDX/NOPB have different interface roles from the DS90CR562MTDX receiver. Confirm the exact device function, pin names, enable polarity, clock topology, supply limits, and signal timing against the manufacturer datasheets. Also verify the ordering suffix because reel, tray, finish, and lead-free markings can affect procurement and assembly documentation even when the electrical function is unchanged.
تعمیل کی معلومات
The available product listings identify a commercial-grade 48-TSSOP FPD receiver but do not provide definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to this commercial interface IC.