EPM9480RC208-20 - MAX 9000 CPLD, 12K Gates, 560 Macro Cells | Intel
MPN: EPM9480RC208-20 ✗ اختتامِ زندگیEPM9480RC208-20 جائزہ
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PAL/GAL devices and high-density FPGAs. CPLDs use a classic PLA-style AND/OR macro cell fabric with non-volatile on-chip storage, giving them instant-on configuration, deterministic timing, and immunity to configuration memory corruption. The MAX 9000 family is the high-density, high-I/O extension of the classic Altera MAX architecture, providing predictable timing suitable for glue logic, bus interfacing, and state-machine decoding in industrial and telecommunications systems.
Key features of the EPM9480RC208-20 include a 20 ns worst-case pin-to-pin delay through the Logic Array Blocks (LABs), 560 macro cells distributed across 16 LABs, and a maximum operating frequency of approximately 117.6 MHz for registered logic. The device operates from a 5V core supply with 5V-tolerant I/O on most pins, supports in-system programmability via the IEEE 1149.1 JTAG interface, and integrates a JTAG-based boundary-scan test capability for board-level test access.
Architecturally, the EPM9480RC208-20 uses Altera's classic MAX 9000 multi-LAB structure with a global Programmable Interconnect Array (PIA) that routes signals between LABs with predictable delay. Each macro cell contains a programmable AND/OR array, a flip-flop, and a configurable I/O architecture, allowing designers to implement both combinatorial and registered logic with consistent timing regardless of placement.
Typical applications include bus-interface and protocol-bridge logic (PCI, ISA, VME), address decoding and wait-state generation for microprocessors, glue logic between processors and peripherals, industrial control state machines, and legacy telecommunications backplane design. The instant-on non-volatile configuration makes the MAX 9000 family especially suited for applications where FPGA configuration time is unacceptable.
When designing with the EPM9480RC208-20, ensure the 5V supply rail is well-decoupled with 0.1 uF ceramic capacitors placed close to each VCC pin group, and observe the 208-pin RQFP thermal envelope when operating at high toggle rates. Use the Altera MAX+PLUS II or Quartus design toolchain for entry, fitting, and JTAG programming. Designers migrating to newer products should evaluate MAX II or MAX V CPLDs as modern, lower-power alternatives.
This page synthesizes distributor pricing from Octopart and DigiKey listings, drop-in pin-compatible alternatives from the same Altera MAX 9000 family, and practical design considerations not duplicated from the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل EPM9480RC208-20 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM9480RC208-20 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Usable Gates, Operating Temperature, Macrocells, User I/O Pins.
EPM9480RC208-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9480RC208-15N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-20
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9320RC208-20
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9400RC208-20
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9480RC208-20 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX 9000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Usable Gates | 12,000 |
| Macro Cells | 560 |
| Logic Array Blocks (LABs) | 16 |
| Pin-to-Pin Delay | 20 ns |
| Maximum Operating Frequency | 117.6 MHz |
| سپلائی وولٹیج | 5 V |
| Technology | CMOS EEPROM (non-volatile) |
| پیکیج | 208-pin RQFP (Plastic Quad Flat Pack) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Programming Interface | JTAG (IEEE 1149.1) / ByteBlaster |
EPM9480RC208-20 208-pin rqfp (plastic quad flat pack) پن کنفیگریشن گائیڈ
EPM9480RC208-20 (208-pin rqfp (plastic quad flat pack) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EPM9480RC208-20.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EPM9480RC208-20 کے لیے موزوں ہے 6 ایپلیکیشنs: PCI/ISA Bus Interface Logic, Microprocessor Address Decoding, Industrial Control State Machines, Telecommunications Backplane Glue Logic, Legacy VME and Multibus Systems, Power-Sequencing and Supervisor Logic.
PCI/ISA Bus Interface Logic
The EPM9480RC208-20 is well suited to legacy PCI and ISA bus-interface glue logic where 560 macro cells provide ample capacity for address decoding, wait-state generation, and bus-cycle translation. The 20 ns pin-to-pin delay comfortably meets PCI 33 MHz timing budgets (30 ns period), and the 5V I/O matches PCI/ISA signalling levels without external transceivers. Designers typically implement target/slave decoders, interrupt controllers, and DMA state machines in a single device, replacing multiple 22V10 or 16V8 PALs with one CPLD.
تجویز کردہ
Microprocessor Address Decoding
Address decoding for microprocessor memory maps is a canonical MAX 9000 application. The EPM9480RC208-20's 560 macro cells comfortably handle chip-select generation for complex memory and peripheral maps with multiple wait-state outputs. Its 20 ns propagation delay introduces minimal insertion latency, and the non-volatile EEPROM configuration means the device is fully operational within nanoseconds of power-up - critical for boot ROM chip-select generation where FPGAs would not yet be configured.
تجویز کردہ
Industrial Control State Machines
Industrial automation controllers benefit from the EPM9480RC208-20's deterministic timing, 5V tolerance, and instant-on non-volatile configuration. The 560 macro cells accommodate multi-state sequential machines for motor control sequencing, sensor debouncing, and safety-interlock logic. Predictable 20 ns pin-to-pin timing simplifies worst-case latency analysis for safety-critical paths, and the 208-pin RQFP package's generous I/O count supports direct interfacing to multiple 24V-tolerant opto-isolated inputs.
تجویز کردہ
Telecommunications Backplane Glue Logic
Legacy telecommunications backplanes rely on CPLDs like the EPM9480RC208-20 for serial-to-parallel conversion, framing logic, and clock-domain crossing between TDM buses. The 5V I/O matches traditional telecom line-interface voltages, and the 560 macro cells handle multi-channel protocol adaptation in a single device. Deterministic 20 ns timing simplifies compliance testing against telecom jitter specifications.
تجویز کردہ
Legacy VME and Multibus Systems
The EPM9480RC208-20 is well matched to legacy VMEbus and Multibus interface designs where bus arbitration, interrupt handling, and address mapping require substantial combinational logic. The 208-pin RQFP package provides the high I/O count required for full 32-bit bus implementations, and the 5V supply matches VMEbus signalling directly. Long-term availability through distributors supports continued production of legacy industrial and military systems.
تجویز کردہ
Power-Sequencing and Supervisor Logic
Power-supply sequencing for multi-rail systems is an ideal fit for the EPM9480RC208-20's instant-on non-volatile behaviour. The CPLD can power up fully configured before any supervisory reset is released, eliminating the race condition between FPGA configuration and power-rail ramp. 560 macro cells support sequencing of 8-16 rails with fault-propagation and timing-margin monitoring. The 20 ns delay is negligible compared to power-rail rise times.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPM9480RC208-20 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPM9480RC208-15 | EPM9480RC208-15N | EPM9560RC208-20 | EPM9320RC208-20 | EPM9400RC208-20 |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 208-pin RQFP | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same |
| Family | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 |
| Macro Cells | 560 | 560 | 560 | 560 | 320 | 400 |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 6,000 | 8,000 |
| Pin-to-Pin Delay | 20 ns | 15 ns | 15 ns | 20 ns | 20 ns | 20 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Interface | JTAG / ByteBlaster | JTAG / ByteBlaster | JTAG / ByteBlaster | JTAG / ByteBlaster | JTAG / ByteBlaster | JTAG / ByteBlaster |
اہم امتیازی خصوصیات
- Highest-density 20 ns option in MAX 9000 208-pin RQFP family (بمقابلہEPM9480RC208-15)
- Larger macro-cell count at same footprint vs EPM9320RC208-20 (بمقابلہEPM9320RC208-20)
- Mature, broadly available MAX 9000 silicon (بمقابلہEPM9400RC208-20)
ڈیزائن نوٹس
The EPM9480RC208-20 operates from a single 5V supply. Place 0.1 uF ceramic decoupling capacitors within 5 mm of every VCC and GND pin pair, and add a 10 uF bulk tantalum or ceramic capacitor near the package. Because the device is CMOS and quiescent current is low, most supply noise comes from I/O switching transients; adequate decoupling prevents VCC droop during simultaneous-output switching events.
Estimated: at maximum toggle rate on 100 I/O pins at 20 MHz with 50 pF loads, dynamic power dissipation is approximately P = C*V^2*f*N = 50e-12 * 25 * 20e6 * 100 ≈ 0.25 W. The 208-pin RQFP has theta_JA of roughly 35 C/W, producing a junction temperature rise of ~9 C above ambient. No heatsink is required for typical operating conditions.
Do not apply voltages above 5.5V to any I/O pin - the MAX 9000 family is not 5V-tolerant on outputs driven by external sources. Use current-limiting series resistors on JTAG TCK/TMS/TDO/TDI lines if the programming cable shares a bus with 3.3V devices. Always configure unused pins as outputs driving low or as inputs with internal pull-ups enabled to minimize supply current.
تعمیل کی معلومات
EPM9480RC208-20 was originally released in the late 1990s; lead-free reflow variants exist (EPM9480RC208-15N) but RoHS compliance status for the standard -20 variant is not confirmed by the verified web data.