Renesas Electronics

ISL8487IB-T - Low-Power RS-485/422 Transceiver | Renesas

MPN: ISL8487IB-T ✓ فعال
5 V Vdss RS-422 and RS-485 Rds(on) 8-SOIC, 0.154 in (3.90 mm) Width Package
MOQ: 1 |

ISL8487IB-T جائزہ

Renesas ISL8487IB-T is a half-duplex, single-transceiver interface IC for RS-485 and RS-422 data links, operating from a 5 V supply and offering one-quarter unit-load drive capability in an 8-pin SOIC package. The ISL8487IB-T combines a low-power RS-485/RS-422 transceiver with ESD-protected communication pins, making it suitable for industrial control, instrumentation, and point-to-point or multidrop serial networks where low power and compact packaging are important.

An RS-485/RS-422 transceiver is a physical-layer interface IC that converts logic-level transmit and receive signals into differential bus signals and converts incoming differential signals into CMOS-compatible logic. The RS-485 standard supports balanced, multipoint communication over relatively long cables, while RS-422 is commonly used for point-to-point links. Within the interface hierarchy, the ISL8487IB-T belongs to the RS-485/RS-422 transceiver class of communication interface ICs.

The device is identified as a one-transceiver, half-duplex component with one-quarter unit-load drive capability. Its 5 V operation and low-power design make it appropriate for embedded systems in which every milliampere affects system thermal performance or battery life. The 8-pin SOIC package also supports compact, surface-mount PCB construction while providing enough pins for separate driver input, receiver output, enable control, supply, and ground connections.

The one-quarter unit-load rating enables the device to present only one quarter of a standard unit load to the bus. This loading capability allows more nodes to share a multidrop network than a one-unit-load transceiver while preserving signal integrity. Its half-duplex architecture supports shared transmit and receive circuitry, reducing board area and simplifying bus direction control in designs that do not require simultaneous full-duplex operation.

Typical uses include industrial sensor gateways, programmable logic controller communication, building automation, remote I/O modules, instrumentation, and embedded serial controllers. The part is particularly appropriate when the bus cable length, node count, ground-reference conditions, and data rate remain compatible with the limits of the Renesas ISL8487 family. A network should still be checked for termination, biasing, and transient protection requirements.

PCB implementation should keep the transceiver close to the bus connector and provide a continuous ground reference between the transceiver and connector. Place network termination and any failsafe biasing components where they can be selectively configured, and confirm that the logic interface voltage of the connected controller is compatible with the transceiver. The SOIC footprint simplifies assembly, although exposed bus and logic pins still require careful handling during soldering.

This product page combines package and interface details, commercially focused sourcing guidance, pin-compatible candidate evaluation, and application-specific design guidance. It is intended to help engineers verify the electrical trade-offs and board-level requirements before integrating the ISL8487IB-T into an RS-485 or RS-422 system.

کے لیے ڈراپ اِن متبادل ISL8487IB-T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ISL8487IB-T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Slew Rate, Mounting Type, Product Type, Supported Standards.

Renesas Electronics
Package: 8-pin plastic DIP (8-PDIP)
Slew Rate: Slew-rate limited
Mounting Type: Through-hole
موازنہ کریں ISL8487IB-T →
Renesas Electronics
Package: 14-pin SOIC
Slew Rate: Limited
Product Type: RS-422/RS-485 transceiver
موازنہ کریں ISL8487IB-T →
Renesas Electronics
Package: 14-pin SOIC
Product Type: RS-485/RS-422 transceiver
Supported Standards: RS-485 and RS-422
موازنہ کریں ISL8487IB-T →

ISL8488IP

✅ ڈراپ-اِن
Renesas Electronics
📦 8-SOIC
RS-485/RS-422 transceiver · 5 V · 250 kbps · Full duplex · RS-485 and RS-422 · 1/1 transceiver · Slew-rate limited · Low power

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ISL8489E

✅ ڈراپ-اِن
📦 8-SOIC
Same 8-pin SOIC pin count and 0-pin package-count difference; electrical performance and exact pin assignment must be compared with ISL8487IB-T.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ISL8489EIB

✅ ڈراپ-اِن
Renesas Electronics
📦 8-SOIC
RS-422/RS-485 transceiver · 5 V · 4.5 V to 5.5 V · 250 kbps · 1 · 1 · Full duplex · RS-422 and RS-485

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ISL8489IB

✅ ڈراپ-اِن
Renesas Electronics
📦 8-SOIC
RS-485/RS-422 transceiver · 1 transmit / 1 receive · Full duplex · 5 V · 250 kbps · RS-485 and RS-422 · No RX/TX enable controls · BiCMOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX483ECSA+T

✅ ڈراپ-اِن
📦 8-SOIC
Same 8-pin SOIC package and RS-485/RS-422 half-duplex role; load capability, data rate, supply range, thresholds, and enable behavior require direct comparison.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ISL8487IB-T تفصیلات

Transceiver Configuration 1/1 Transceiver Half
Supported Standards RS-422 and RS-485
سپلائی وولٹیج 5 V
Bus Unit Load 1/4 Unit Load
Communication Mode Half Duplex
ESD Protection ESD Protected
Power Class Low Power
Slew Rate High Speed or Slew Rate Limited
پیکیج 8-SOIC, 0.154 in (3.90 mm) Width
ماؤنٹنگ ٹائپ Surface Mount
پنز کی تعداد 8 Pins
Manufacturer Renesas Electronics Corporation

ISL8487IB-T 8-soic, 0.154 in (3.90 mm) width پن کنفیگریشن گائیڈ

ISL8487IB-T (8-soic, 0.154 in (3.90 mm) width پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ISL8487IB-T کے لیے 8-soic, 0.154 in (3.90 mm) width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ISL8487IB-T.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ISL8487IB-T کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Gateway, PLC Communication Module, Building Automation Controller, Remote I/O Module, Test and Measurement Instrument, Embedded Serial Controller.

🏭

Industrial Sensor Gateway

The ISL8487IB-T fits an industrial sensor gateway that must connect several remote sensor nodes to a controller over an RS-485 bus. Its one-quarter unit-load capability allows a higher node count than a one-unit-load transceiver, while the low-power 5 V operation reduces supply demand in distributed equipment. The half-duplex arrangement uses one physical bus for command transmission and sensor responses. Designers should place the transceiver near the bus connector, provide a continuous ground path, and verify termination and failsafe biasing for the actual cable length and topology.

🏭

PLC Communication Module

The ISL8487IB-T is appropriate for a programmable logic controller communication module that exchanges commands and process data with remote equipment over a balanced bus. Its 5 V operation supports compact controller boards, and the one-quarter unit-load rating helps preserve bus loading margin when several modules are connected. Half-duplex operation simplifies the physical interface, but firmware must control direction switching and account for turnaround time. Validate receive thresholds and bus timing against the network's data rate and termination arrangement before releasing the circuit.

🏠

Building Automation Controller

A building automation controller can use the ISL8487IB-T to connect thermostats, access panels, lighting controllers, and environmental sensors through an RS-485 network. Low power is useful in remotely powered or thermally constrained control cabinets, while the one-quarter unit-load interface supports a larger collection of bus nodes. The 8-pin SOIC keeps the footprint compact for space-constrained controller boards. Robust implementation still requires careful grounding, surge protection at exposed connectors, and configurable termination so unused network sections do not load the bus.

🔧

Remote I/O Module

The ISL8487IB-T suits a remote input/output module that communicates with a central controller over a multidrop RS-485 bus. The low-power 5 V transceiver helps maintain system efficiency, and one-quarter unit loading improves compatibility with networks containing multiple remote modules. Its half-duplex mode allows the module to send updated sensor states while receiving configuration commands over the same pair of conductors. The circuit should include a low-impedance ground connection between the bus and transceiver, and production testing should cover idle bias, driver enable transitions, and receiver operation across the intended temperature range.

📟

Test and Measurement Instrument

The ISL8487IB-T can provide the physical interface for a test and measurement instrument that communicates with a host computer or laboratory controller using RS-485 or RS-422. The compact SOIC package supports dense instrument electronics, and the one-quarter unit-load rating can accommodate multiple instruments without unnecessarily loading the bus. Low-power characteristics also help control self-heating in precision equipment. For laboratory environments with long cables, check grounding, isolate ground-potential differences, and use the balanced interface in accordance with the ISL8487 family application guidance.

🖥️

Embedded Serial Controller

The ISL8487IB-T is a practical choice for an embedded controller that must add an isolated or protected-by-layout RS-485/RS-422 port alongside its digital processor. The 5 V interface and low-power operation align with common embedded power rails, while the half-duplex transceiver minimizes external circuitry compared with a full-duplex implementation. The controller must manage TX/RX direction logic and provide a defined state during receive operation. During PCB layout, keep the bus-side traces short and away from switching nodes, and verify the transceiver's logic-level compatibility with the processor.

تجویز کردہ پروڈکٹس کا خلاصہ

ISL8487IB Renesas Electronics استعمال ہوتا ہے: Industrial Sensor Gateway, PLC Communication Module, Building Automation Controller, Test and Measurement Instrument MAX483ECSA+T RS-485/RS-422 transceiver comparison candidate استعمال ہوتا ہے: Industrial Sensor Gateway, Remote I/O Module, Embedded Serial Controller ISL8489IB Renesas Electronics استعمال ہوتا ہے: PLC Communication Module, Embedded Serial Controller ISL8489EIB Renesas Electronics استعمال ہوتا ہے: Building Automation Controller ISL8488 Related Renesas RS-485/RS-422 family device استعمال ہوتا ہے: Remote I/O Module ISL8489E Related family-level transceiver استعمال ہوتا ہے: Test and Measurement Instrument
What is the ISL8487IB-T?
The ISL8487IB-T is a Renesas half-duplex, one-transceiver interface IC for RS-485 and RS-422 communication. It operates from 5 V, supports one-quarter unit-load bus loading, and is packaged in an 8-pin SOIC measuring 0.154 inches, or 3.90 mm, wide. According to the Renesas ISL8487 datasheet, the low-power half-duplex configuration is intended for compact serial-interface equipment.
Where can I download the ISL8487IB-T datasheet PDF?
The ISL8487IB-T datasheet can be located through the Renesas ISL8487 family documentation or the linked ISL8487 datasheet index on Alldatasheet. The document identifies the family as a 5 V, low-power RS-485/RS-422 device with one-quarter unit-load capability. Before schematic capture or PCB release, verify the package drawing, pin names, electrical limits, and ordering information against the exact ISL8487IB-T variant.
Where can I find the ISL8487IB-T pinout?
The ISL8487IB-T uses an 8-pin SOIC footprint, but the individual pin numbers and signal names are not reproduced in the available product summaries. Use the manufacturer pin-description table in the ISL8487 datasheet when assigning driver, receiver, enable, supply, and ground connections. Do not infer the pinout solely from another RS-485 transceiver, because enable polarity and package assignments can differ.
Where can I buy ISL8487IB-T online?
The ISL8487IB-T can be requested through the Request a Quote form on this page. The form lets you specify quantity, packaging, target delivery location, and production requirements without relying on a static price. Stock and lead time can change, so submit the requested quantity and delivery schedule to obtain a current commitment from the supplier.
What is the price of the ISL8487IB-T?
The current commercial price for the ISL8487IB-T is obtained through the Request a Quote form on this page. Submit the required quantity, package, and shipment destination so the quotation reflects current inventory and supply conditions. This approach is preferable to using an archived unit price because component availability and volume pricing can vary over time.
What is the lead time for ISL8487IB-T?
The production lead time for the ISL8487IB-T depends on order quantity, current inventory, and required delivery terms. Use the Request a Quote form on this page to state the quantity, target date, and shipment destination. A complete quote should also confirm the exact MPN, package form, delivery schedule, and any traceability requirements.
Is the ISL8487IB-T in stock?
Current ISL8487IB-T inventory should be confirmed through the Request a Quote form on this page. Enter the required quantity and delivery region so the response reflects current stock, allocation, and replenishment conditions. For production planning, ask for separate confirmation of quantity available for immediate shipment and the balance scheduled for later delivery.
ISL8487IB-T vs MAX483ECSA+T - which is better for an RS-485 bus?
The ISL8487IB-T and MAX483ECSA+T are both 8-pin RS-485/RS-422 transceiver candidates, but the final choice depends on bus loading, data rate, driver strength, enable behavior, and ESD requirements. The ISL8487IB-T is identified as a one-quarter unit-load, low-power, half-duplex 5 V device. Compare both parts against the node count, cable length, termination plan, and immunity requirements in the Renesas and Maxim datasheets.
What is the difference between ISL8487IB-T and ISL8487IB?
The ISL8487IB-T and ISL8487IB denote the same Renesas ISL8487IB device ordering configuration, with the suffix associated with the orderable package or packing designation rather than a change to the RS-485/RS-422 transceiver function. Both are listed as one-transceiver, half-duplex 8-SOIC devices. Confirm the manufacturer ordering table and reel or tube details before treating the two labels as interchangeable procurement terms.
When should I choose ISL8487IB-T over MAX483ECSA+T?
Choose the ISL8487IB-T when a one-quarter unit-load, low-power, half-duplex 5 V RS-485 interface is preferred and its timing, protection, and bus-drive characteristics satisfy the design. Choose the MAX483ECSA+T when its specified data rate, driver strength, supply range, and protection characteristics provide a better fit for the bus. Confirm pin compatibility, receiver thresholds, and enable polarity before replacement.
Is the ISL8487IB-T suitable for a multidrop RS-485 network?
The ISL8487IB-T is suitable for RS-485 networks when its one-quarter unit-load rating supports the planned node count and the complete bus passes signal-integrity checks. Its low-power operation is valuable in distributed industrial systems, while the half-duplex mode supports shared bus access. Cable length, topology, termination, biasing, ground offsets, and data rate still determine whether the network is reliable.
What can replace the ISL8487IB-T?
The MAX483ECSA+T is a documented 8-pin RS-485/RS-422 comparison candidate, but it should be treated as a candidate replacement rather than an automatic drop-in substitute. Verify pin assignment, driver and receiver thresholds, unit load, maximum data rate, enable polarity, supply range, and ESD rating. For a PCB already laid out for the Renesas part, also compare the SOIC body dimensions and copper footprint.
Is the MAX483ECSA+T a drop-in replacement for ISL8487IB-T?
The MAX483ECSA+T may serve as a drop-in candidate because it is compared with the ISL8487IB-T in an 8-pin RS-485/RS-422 context, but final approval requires pin-by-pin and parameter-by-parameter review. The available comparison identifies slew-limited, low-power operation and ESD protection but does not establish every threshold or timing value. Test the intended bus configuration before production substitution.
What are the key specifications of ISL8487IB-T that engineers should know?
The principal ISL8487IB-T characteristics are a 5 V supply, one-transceiver half-duplex operation, RS-485 and RS-422 support, one-quarter unit-load drive capability, low-power operation, ESD-protected bus interfaces, and an 8-pin SOIC package. These attributes make the device relevant to compact multidrop and point-to-point interface designs. Maximum data rate, temperature range, receiver thresholds, and absolute maximum ratings must be confirmed from the manufacturer datasheet.
What is the best Renesas equivalent for ISL8487IB-T?
The Renesas ISL8487IB is the closest documented family designation for the ISL8487IB-T and uses the same 8-SOIC interface description. Other ISL8488 and ISL8489-family devices appear alongside the ISL8487 in the datasheet index, but their unit-load, speed, and pin configurations must be checked before using them as direct replacements. Use the exact pin table and ordering information for the candidate device rather than relying on family naming alone.
Does the ISL8487IB-T require external RS-485 termination?
The ISL8487IB-T does not inherently terminate the bus; termination is a network-layout decision. Install termination at appropriate physical endpoints of a multidrop RS-485 cable when required by the topology, and use biasing only where needed to maintain a valid idle state. Confirm resistor values against the driver strength, cable length, data rate, and the termination guidance in the ISL8487 datasheet.

کے لیے انجینئرنگ ریفرنس ڈیٹا ISL8487IB-T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ISL8487IB-T when the design requires a low-power, 5 V, half-duplex RS-485/RS-422 transceiver in an 8-pin SOIC and the bus benefits from one-quarter unit loading. Its loading capability is particularly useful in multidrop networks where node count must be controlled. Evaluate ISL8488, ISL8489E, ISL8489EIB, or ISL8489IB when a related Renesas device offers a better speed, protection, or lifecycle fit, but verify their exact pin assignments and electrical limits. MAX483ECSA+T is a cross-brand candidate for an 8-pin RS-485/RS-422 design; use it only after checking unit load, receiver thresholds, data rate, supply range, enable polarity, and ESD requirements. For an existing board, confirm the footprint and every electrical difference before production substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ISL8488 ISL8489E ISL8489EIB ISL8489IB MAX483ECSA+T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Analog Devices
Package 8-SOIC, 0.154 in (3.90 mm) Width 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Supported Standards RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-485 and RS-422
Power Class Low Power Low Power Low Power Low Power Low Power Low Power

اہم امتیازی خصوصیات

  • Lower bus loading supports greater network flexibility (بمقابلہISL8489IB)
  • Compact single-transceiver implementation (بمقابلہMAX483ECSA+T)
  • Low-power operation for compact serial interfaces (بمقابلہISL8488)

ڈیزائن نوٹس

Place the ISL8487IB-T close to the RS-485 or RS-422 connector and route the differential bus pair as a closely coupled pair. Provide a continuous ground-reference path between the transceiver and connector, while keeping switching-regulator and high-current return paths away from the receiver input. This arrangement reduces susceptibility to common-mode noise and improves the margin between the transmitter and receiver thresholds.

Do not assume that matching the 8-pin SOIC footprint guarantees drop-in compatibility. Verify driver input polarity, receiver enable behavior, supply range, receiver thresholds, unit load, maximum data rate, and ESD rating for every proposed substitute. The bus also requires an intentional termination and biasing strategy; do not populate fixed termination at every node because excessive termination can reduce driver voltage and impair communication.

Validate the completed network with the intended cable, node spacing, termination, and data rate. A one-quarter unit-load transceiver can support more nodes than a one-unit-load device, but capacitive loading and reflections still depend on topology. Use controlled-direction firmware to avoid bus contention, allow the receiver to recover before returning to transmit, and test the system across voltage, temperature, and power-up conditions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Renesas product documentation or declaration of compliance. AEC-Q100 is not applicable to this general-purpose interface transceiver unless the manufacturer identifies a specific automotive-qualified ordering variant.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ISL8487IB-T datasheet ISL8487IB-T pinout ISL8487IB-T datasheet pdf ISL8487IB-T equivalent ISL8487IB-T replacement ISL8487IB-T cross reference ISL8487IB-T vs MAX483ECSA+T Renesas ISL8487IB-T ISL8487IB-T 8-SOIC ISL8487IB-T RS-485 transceiver ISL8487IB-T price ISL8487IB-T stock

متعلقہ اجزاء اور اصطلاحات

Renesas Electronics ISL8487IB-T ISL8487IB ISL8488 ISL8489E ISL8489EIB ISL8489IB MAX483ECSA+T RS-485 RS-422 half-duplex transceiver interface IC communication interface IC semiconductor one-quarter unit load 5 V transceiver ESD protection low-power electronics 8-SOIC SOIC package family surface mount SMD industrial control building automation remote I/O
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں