STMicroelectronics

LM2904YDT - 30V Low-Power Dual Op Amp | STMicroelectronics

MPN: LM2904YDT ✓ فعال
30 V Vdss 8-SOIC Package
MOQ: 1 |

LM2904YDT جائزہ

The STMicroelectronics LM2904YDT is a low-power dual operational amplifier with two independent amplifiers, a 30 V family voltage rating, a 0.6 V/µs slew rate, and an 8-pin SOIC package. It is intended for general-purpose signal-conditioning applications where two amplifier channels, low power consumption, and a tolerant supply-voltage range provide a practical combination of capability and board economy.

An operational amplifier, or op amp, is a voltage-gain device used to amplify small input signals in analog signal chains. The LM2904 family belongs to the broader hierarchy of analog integrated circuits, signal amplifiers, operational amplifiers, and general-purpose amplifiers. Its differential inputs and single-ended outputs allow each channel to support common tasks such as buffering, gain amplification, voltage comparison, filtering, and instrumentation-style signal conditioning.

The LM2904YDT provides two amplifier circuits in one 8-SOIC package. Its stated 30 V family rating supports operation from single-supply industrial signal-conditioning circuits, while the low-power architecture suits battery-powered and portable equipment. The 0.6 V/µs slew rate provides a concrete indication of how quickly the output can follow a changing input, making the device appropriate for low-to-moderate-bandwidth applications rather than high-speed signal paths.

STMicroelectronics describes the LM2904 family as a low-power dual operational amplifier. The automotive-oriented Y suffix and automotive-grade classification make the LM2904YDT relevant to vehicle electronics, industrial controls, and other systems that require a dual amplifier in a compact surface-mount package. Because the package contains two channels, PCB area and component count can be reduced compared with separate single-channel amplifiers.

Typical uses include low-frequency sensor conditioning, current-loop signal amplification, audio preamplification, active filtering, voltage buffering, and general industrial control. The device is also suitable for split-supply circuits when the signal can remain within the input and output common-mode limits specified by the manufacturer datasheet. Applications requiring wide bandwidth, rail-to-rail input or output operation, very low offset voltage, or low-noise performance should compare the LM2904YDT with precision or rail-to-rail amplifier families before finalizing the design.

Designers should verify input common-mode range, output swing, output-current capability, and stability with the external compensation network for each specific operating point. Keep input and feedback traces short, place decoupling capacitors close to the supply pins, and avoid using the amplifier outside its stated supply and common-mode limits. A bypass capacitor near each device helps control supply-line noise on shared analog boards.

This product page combines the LM2904YDT operating identity with package, application, drop-in replacement, and design guidance. It highlights where the conventional low-power dual op amp is appropriate and where precision, speed, or rail-to-rail characteristics may justify a different amplifier architecture.

کے لیے ڈراپ اِن متبادل LM2904YDT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2904YDT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Gain-Bandwidth Product, Slew Rate, Amplifier Type, Supply Voltage Range.

Texas Instruments
Package: 8-SOIC (D)
Slew Rate: 0.3 V/us
Amplifier Type: General Purpose
موازنہ کریں LM2904YDT →
Texas Instruments
Package: 8-SOIC, 3.90 mm body width
Gain-Bandwidth Product: 700 kHz per channel
Slew Rate: 0.3 V/µs
موازنہ کریں LM2904YDT →
onsemi
Package: 8-SOIC, 3.90 mm body width
Gain-Bandwidth Product: 1 MHz
Amplifier Type: General Purpose
موازنہ کریں LM2904YDT →
Texas Instruments
Gain-Bandwidth Product: 700 kHz
موازنہ کریں LM2904YDT →
STMicroelectronics
Package: 8-pin MiniSO
Gain-Bandwidth Product: 1.1 MHz
Slew Rate: 0.6 V/us
موازنہ کریں LM2904YDT →
STMicroelectronics
Package: 8-TSSOP
Supply Voltage Range: Wide single-supply range; exact limits not stated in the product listing
موازنہ کریں LM2904YDT →
STMicroelectronics
Package: 8-SOIC, 3.90 mm body width
Gain-Bandwidth Product: 1.1 MHz
Amplifier Type: Dual general-purpose operational amplifier
موازنہ کریں LM2904YDT →
Texas Instruments
Amplifier Type: General Purpose
موازنہ کریں LM2904YDT →

LM2904YD

✅ ڈراپ-اِن
📦 SOIC-8
Same dual-amplifier 30 V family and 8-SOIC class; ordering-temperature difference is 0% in the shared family voltage rating, while qualification details require confirmation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM2904WPT

✅ ڈراپ-اِن
STMicroelectronics
📦 SOIC-8
STMicroelectronics · Dual general-purpose operational amplifier · 2 · Single-ended · 8-TSSOP · Surface mount · Single supply

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2904DR

✅ ڈراپ-اِن
Texas Instruments
📦 SOIC-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2904VDR2G

✅ ڈراپ-اِن
onsemi
📦 SOIC-8
General Purpose · 2 circuits · 1 MHz · 0.6 V/µs · Up to ±16 V (32 V total) · Extends to ground/VEE · Single supply or split supply · 8-SOIC, 3.90 mm body width

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2904YDT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type General-purpose operational amplifier
Number of Channels 2 channels
Number of Circuits 2 circuits
Architecture Dual independent operational amplifier
Power Class Low-power
Family Supply Voltage Rating 30 V
Slew Rate 0.6 V/µs
آؤٹ پٹ کی قسم Single-ended
پیکیج 8-SOIC
ماؤنٹنگ ٹائپ Surface mount
Automotive Grade Automotive-grade variant
RoHS اسٹیٹس Compliant
REACH Status Compliant
Moisture Sensitivity Level MSL 1

LM2904YDT 8-soic پن کنفیگریشن گائیڈ

LM2904YDT (8-soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LM2904YDT کے لیے 8-soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2904YDT.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM2904YDT کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Automotive Low-Frequency Control Circuits, Battery-Powered Monitoring Equipment, Audio Preamplification and Buffering, Active Filtering and Analog Control, Power-Supply Feedback and Load Buffering.

🏭

Industrial Sensor Signal Conditioning

The LM2904YDT fits industrial sensor-conditioning stages that need two amplifier channels and a conventional 8-SOIC footprint. Each amplifier can provide gain or buffering around a transducer signal, while the device’s 30 V family rating and low-power characterization suit control boards operating from industrial supply rails. The 0.6 V/µs slew rate is adequate for many low-bandwidth pressure, temperature, and position signals, but the design must stay within the manufacturer’s input common-mode and output-swing limits. Decoupling capacitors should be placed close to the supply pins, and feedback components should use stable resistors and capacitors to avoid unexpected gain or oscillation.

🚗

Automotive Low-Frequency Control Circuits

The automotive-grade designation makes the LM2904YDT a candidate for low-frequency vehicle control and signal-conditioning circuits that operate within its documented electrical limits. Two channels can support separate interface or conditioning paths, reducing the component count compared with two discrete single amplifiers. The 30 V family rating and 0.6 V/µs slew rate can suit slowly changing control signals rather than high-bandwidth communication channels. Designers must still verify temperature range, common-mode behavior, output swing, load drive, electromagnetic compatibility, and qualification requirements. A solid ground return, short feedback paths, and local supply bypassing are especially important in vehicle electrical environments.

📱

Battery-Powered Monitoring Equipment

The low-power dual-amplifier architecture of the LM2904YDT suits portable monitoring equipment in which two low-bandwidth analog channels must be conditioned from limited power budgets. The two amplifiers can handle sensor amplification, voltage buffering, or active filtering without requiring two separate packages. Its 0.6 V/µs slew rate is suitable for many slowly varying sensor outputs, while the dual integration can reduce board area. Battery designs should still calculate worst-case supply current, verify the operating voltage against the manufacturer’s electrical limits, and account for the output drive required by the ADC input and external network. Low-leakage components may be necessary when the source impedance is high.

🎧

Audio Preamplification and Buffering

The LM2904YDT can be used for modest-bandwidth audio preamplification or impedance buffering where two signal paths share a common 8-SOIC package. The 0.6 V/µs slew rate is adequate for many line-level audio stages operating well below high-frequency communication rates. The design must ensure that the input signal remains inside the amplifier’s common-mode range and that the output swing accommodates the chosen gain. For microphone or high-impedance sources, input bias current and source impedance can materially affect DC accuracy. The LM2904YDT should not be treated as a low-noise precision device, so headphone outputs, audio ADCs, or high-gain microphone stages may require a dedicated low-noise amplifier.

⚡

Active Filtering and Analog Control

The two channels in the LM2904YDT can implement active filters, integrators, or analog control functions where moderate frequency and precision requirements are sufficient. Its 0.6 V/µs slew rate constrains large-signal performance through high-Q or narrow-band networks, so the gain and capacitor values must be checked for stability. An 8-SOIC package also permits the two amplifier sections to be placed close to associated passive components, reducing sensitive routing. For precision filters, the amplifier’s offset and bias-current behavior contribute directly to output error. Use low-tolerance resistors and suitable film or ceramic capacitors, observe the manufacturer’s grounding guidance, and probe the final circuit because amplifier and component parasitics can shift the nominal response.

🖥️

Power-Supply Feedback and Load Buffering

The LM2904YDT can buffer a power-supply feedback node or monitor a low-frequency voltage signal with one channel while the second channel handles another supervisory function. Its 30 V family rating is useful when the surrounding circuit operates above ordinary low-voltage logic levels, and the 0.6 V/µs slew rate is adequate for many feedback and supervisory signals. The amplifier still requires suitable input and output headroom, so its output cannot be assumed to reach either supply rail. Place the device near the feedback components, minimize the feedback-loop trace, and use local decoupling to prevent supply ripple from appearing as output noise. The exact load and stability network must be evaluated at the intended operating voltage.

What are the key specifications of LM2904YDT that engineers should know?
The LM2904YDT is a low-power, dual general-purpose operational amplifier with two amplifier circuits, a 30 V family rating, a 0.6 V/µs slew rate, and an 8-SOIC package. According to the STMicroelectronics LM2904 datasheet, the family is intended for general-purpose signal conditioning. The device combines two independent amplifier channels in one surface-mount package and is identified as an automotive-grade variant.
What is the LM2904YDT and what is an operational amplifier?
The LM2904YDT is a low-power dual operational amplifier containing two general-purpose amplifier channels in an 8-SOIC package. An operational amplifier uses differential input voltage to control its output and is commonly used for amplification, buffering, filtering, and signal conditioning. According to the STMicroelectronics LM2904 datasheet, the device belongs to the LM2904 family with a 30 V family voltage rating.
What is the operating voltage of the LM2904YDT?
The LM2904YDT operates within the LM2904 family's 30 V supply-voltage class. The manufacturer datasheet should be consulted for the exact minimum and maximum supply voltages, common-mode limits, and output-swing conditions for each temperature range. Because a 30 V family rating does not by itself guarantee operation at every intermediate voltage under every load condition, confirm the complete electrical limits before applying the amplifier.
How many amplifier channels does the LM2904YDT contain?
The LM2904YDT contains two amplifier circuits, each with differential inputs and a single-ended output. According to the STMicroelectronics LM2904 datasheet, the family is a dual low-power operational amplifier. Combining two channels in one 8-SOIC package can reduce PCB area and component count when a design needs independent gain, buffering, filtering, or comparison stages.
What package and pin count does the LM2904YDT use?
The LM2904YDT is packaged in an 8-SOIC surface-mount package with eight pins. The component listing identifies the package as 8-SOIC, while the STMicroelectronics datasheet defines the device family and its electrical characteristics. Use the manufacturer pin-description table and package drawing when assigning each dual-amplifier channel to PCB tracks and external components.
Where can I download the LM2904YDT datasheet PDF?
The official LM2904YDT datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/lm2904.pdf. The document covers the LM2904, LM2904A, LM2904W, and LM2904AW family and includes package information. Use its absolute-maximum, electrical-characteristics, typical-performance, and application sections to establish the operating limits for the selected grade.
Is the LM2904YDT suitable for automotive applications?
The LM2904YDT is identified as an automotive-grade variant of the low-power dual operational amplifier family. It can be considered for automotive signal-conditioning functions when the circuit also satisfies the manufacturer’s temperature, voltage, noise, output-swing, and reliability requirements. Confirm the exact ordering-code qualification and AEC-Q100 status from the manufacturer documentation before release.
LM2904YDT vs LM2904WPT — which is better for an industrial control board?
The LM2904YDT is the automotive-grade ordering option, while LM2904WPT is another member of the STMicroelectronics LM2904 family. Both appear in 8-SOIC-related product documentation, but the correct choice depends on temperature grade, qualification requirements, and ordering-code details. For an industrial board, select the grade whose documented electrical limits and qualification cover the actual environment and operating conditions.
LM2904YDT vs TI LM2904 — which should I choose for a new design?
The LM2904YDT provides a low-power dual amplifier in an 8-SOIC package with a stated 30 V family rating and 0.6 V/µs slew rate. TI identifies its LM2904 as a dual 26 V, 700 kHz operational amplifier and describes it as a drop-in replacement for compared devices. Choose by matching supply voltage, bandwidth, common-mode range, temperature grade, qualification, and package rather than by family name alone.
When should I choose LM2904YDT instead of a precision amplifier?
Choose the LM2904YDT when the circuit needs two low-power general-purpose amplifier channels, a conventional SOIC footprint, and adequate performance for moderate-frequency signal conditioning. A precision amplifier is preferable when the design depends on very low offset voltage, low bias current, low noise, or rail-to-rail operation. The LM2904YDT is strongest where cost, channel density, and general-purpose functionality are more important than precision.
What can replace the LM2904YDT on the same PCB?
A valid replacement must use the same 8-SOIC footprint, preserve the dual differential-input and single-ended-output pin arrangement, and meet the original circuit’s supply, common-mode, output-swing, bandwidth, and temperature requirements. Cross-reference candidates include the STMicroelectronics LM2904YD and LM2904WPT, TI LM2904, and onsemi LM2904VDR2G. Confirm each candidate against the manufacturer pinout and electrical limits before production use.
Is the onsemi LM2904VDR2G the same as the LM2904YDT?
The onsemi LM2904VDR2G and STMicroelectronics LM2904YDT are dual general-purpose operational amplifiers associated with the same SOIC-8 class of device, but they are not identical ordering codes. The onsemi part uses the 30 V family rating, while the STMicroelectronics YDT is identified as automotive grade. Treat the onsemi device as a review candidate and verify pinout, temperature grade, offset, bias current, output swing, and qualification.
Where can I buy LM2904YDT online?
The LM2904YDT can be requested through the “Request a Quote” form on this product page. The form is the appropriate channel for current availability, quantity requirements, and an order-backed commercial response. It avoids publishing a price that may change independently of the structured offer data and supports direct review of the exact 8-SOIC ordering code you intend to place in the bill of materials.
What is the price of the LM2904YDT?
Use the “Request a Quote” form on this page to request the current price and quantity breaks for the exact LM2904YDT ordering code. Pricing depends on order quantity, delivery schedule, and commercial terms, so it should be evaluated as a live quote rather than a fixed listing value. Include your target quantity and required delivery location when submitting the request.
What is the lead time and stock status for LM2904YDT?
Request current stock, minimum order quantity, and lead time through the “Request a Quote” form on this page. Availability can change with purchasing activity and order configuration, so use the form for a transaction-ready response. When requesting a quote, identify the LM2904YDT package code, quantity, target date, and whether multiple delivery locations are required.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2904YDT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LM2904YDT when the design needs two low-power, general-purpose amplifier channels, a 30 V family class, and an 8-SOIC footprint, particularly in automotive or industrial signal-conditioning systems. The LM2904YD and LM2904WPT are same-family STMicroelectronics review candidates when their documented temperature grade and qualification fit the application. Consider the TI LM2904 when its stated 26 V, 700 kHz implementation satisfies the circuit, but verify whether the lower voltage-class rating leaves enough margin. The onsemi LM2904VDR2G is a cross-brand option for conventional 30 V dual-amplifier designs, subject to pinout and qualification review. A precision or rail-to-rail amplifier is preferable when low offset, low bias current, low noise, or operation near the supply rails is critical. For every candidate, verify the manufacturer pinout, common-mode range, output swing, stability, temperature grade, and load-drive requirements before replacing the LM2904YDT.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2904YD LM2904WPT LM2904 LM2904VDR2G
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments onsemi
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Supply-Voltage Family Rating 30 V 30 V 30 V 26 V 30 V
Product Classification General-purpose low-power dual operational amplifier General-purpose low-power dual operational amplifier General-purpose low-power dual operational amplifier Dual general-purpose operational amplifier General-purpose dual operational amplifier

اہم امتیازی خصوصیات

  • Automotive-grade ordering option in a dual 8-SOIC package (بمقابلہLM2904VDR2G)
  • Higher family voltage rating than the TI LM2904 (بمقابلہLM2904)
  • Two general-purpose channels in one compact package (بمقابلہLM324ADR)

ڈیزائن نوٹس

Do not interpret the 30 V family rating as permission to operate the output or input at every point between the supply rails. Check the manufacturer’s input common-mode range, output swing, supply limits, and temperature conditions for the selected grade. In particular, a 5 V or 12 V single-supply circuit may not accept a 0 V input, and the output may require additional headroom. This is especially important when replacing a rail-to-rail amplifier in an existing design.

Place the supply bypass capacitor directly between the supply and ground pins of the LM2904YDT, with the ground connection returning to the quiet analog ground region. Keep input, feedback, and output traces short, and avoid routing sensitive signal lines beside high-current switching nodes. Because the 8-SOIC package contains two amplifier channels, arrange the footprints so that external feedback networks and decoupling paths can be connected without long loops around the package.

Check large-signal behavior against the stated 0.6 V/µs slew rate before selecting gain and operating frequency. A high closed-loop gain increases the effective slew-rate demand and can cause output distortion or instability. Use stable feedback resistors, verify whether the application requires an external compensation capacitor, and evaluate the complete circuit with the intended load and bypass network. The dual channels should also be isolated enough to prevent one channel’s output current from disturbing the other channel’s source impedance.

Calculate worst-case supply power using both channels, the load current, and the amplifier’s quiescent current under the intended operating mode. The device is low power, but two active channels and sustained output loading can still contribute meaningful consumption in battery-powered equipment. Confirm the quiescent current and output-current limits from the manufacturer datasheet, then verify that the regulator can meet the transient demand without producing feedback that disturbs the amplifier’s supply rail.

تعمیل کی معلومات

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS and REACH compliance are identified for the LM2904YDT. Exact AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the manufacturer.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-13 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

lm2904ydt datasheet LM2904YDT datasheet pdf LM2904YDT pinout LM2904YDT schematic LM2904YDT equivalent LM2904YDT replacement LM2904YDT cross reference LM2904YDT vs LM2904WPT LM2904YDT SOIC-8 footprint LM2904YDT 30V 0.6V/us LM2904YDT automotive amplifier STMicroelectronics LM2904YDT LM2904YDT price LM2904YDT stock what is the LM2904YDT

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics LM2904YDT LM2904 LM2904YD LM2904WPT LM2904VDR2G Texas Instruments onsemi operational amplifier dual operational amplifier general-purpose amplifier analog integrated circuit signal-conditioning amplifier low-power amplifier SOIC-8 surface-mount package automotive-grade semiconductor 30 V supply-voltage family 0.6 V/µs slew rate input common-mode range output voltage swing feedback network supply decoupling capacitor RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں