STUSB4500QTR vs TPS2547RTER So sánh

So sánh chi tiết song song của STUSB4500QTR bằng STMicroelectronics và TPS2547RTER bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
TPS2547RTER TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI

TPS2547RTER ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số STUSB4500QTR TPS2547RTER
Thương hiệu STMicroelectronics Texas Instruments
Danh mục Interface ICs Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Standalone USB Type-C PD Sink Controller —
USB Standard USB Type-C R2.1, USB Power Delivery R3.0 —
USB Speed USB 1.2 / USB 2.0 (no USB 3.x data) —
Maximum PD Power 100 W (20 V / 5 A) —
Supported PDO Voltages 5 V / 9 V / 12 V / 15 V / 20 V —
Role Sink (UFP) only —
Host Interface I2C (Fast-mode 400 kHz) —
CC Pin VBUS Short Protection Up to 22 V on CC1, CC2, VCONN- —
Integrated NVM Yes (PDO profile configuration) —
Dead Battery Support Yes —
Auto-Run Mode Yes (MCU-less negotiation) —
VCONN Source No (sink only, no VCONN supply) —
GPIO Pins 2 (configurable) —
Hộp 24-QFN (4x4 mm) with exposed pad 16-WQFN (3.00 mm x 3.00 mm), exposed pad
Khoảng nhiệt độ hoạt động -40 C to +105 C —
Supply Voltage (VBUS to VCC internal LDO) Up to 22 V tolerance —
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 3 (168 hours) —
Trạng thái RoHS Compliant Compliant
USB-IF Certification Yes (TID 1074413) —
Chức năng — USB Charging Port Controller and Power Switch
Switch Type — 1:1 N-Channel
Số lượng đầu ra — 1
Điện áp đầu ra (tối đa) — 3 A
Output Current Range — 0.2 A to 3 A
Input Voltage (Max) — 5.5 V
On Resistance (Typ) — [DATA_NEEDED: R_DS(on) at 5V]
Quiescent Current (Disabled) — 2 uA
Quiescent Current (Enabled) — 270 uA
ESD Rating (DM/DP) — 8 kV HBM
USB Data Switch — USB 2.0 High-Speed (D+/D-)
Charging Standards — BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes
Nhiệt độ hoạt động — -40 C to +125 C
Protection Features — Overcurrent, Over-temperature, Under-voltage lockout, Output discharge
UL Recognition — E169910 (CB Certified - Pending)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá