STUSB4500QTR vs TPS2547RTER 比較
詳細並排比較 STUSB4500QTR 由 STMicroelectronics 與 TPS2547RTER 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ 啟用中Texas Instruments
TPS2547RTER - USB Charging Port Controller, 3A Power Switch | TI
TPS2547RTER ✓ 啟用中規格比較
| 參數 | STUSB4500QTR | TPS2547RTER |
|---|---|---|
| 品牌 | STMicroelectronics | Texas Instruments |
| 類別 | Interface ICs | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Standalone USB Type-C PD Sink Controller | — |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | — |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| 封裝 | 24-QFN (4x4 mm) with exposed pad | 16-WQFN (3.00 mm x 3.00 mm), exposed pad |
| 工作溫度範圍 | -40 C to +105 C | — |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| 安裝類型 | Surface Mount | Surface Mount |
| MSL 等級 | 3 (168 hours) | — |
| RoHS 狀態 | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| 功能 | — | USB Charging Port Controller and Power Switch |
| Switch Type | — | 1:1 N-Channel |
| 輸出數量 | — | 1 |
| 輸出電流 (最大) | — | 3 A |
| Output Current Range | — | 0.2 A to 3 A |
| Input Voltage (Max) | — | 5.5 V |
| On Resistance (Typ) | — | [DATA_NEEDED: R_DS(on) at 5V] |
| Quiescent Current (Disabled) | — | 2 uA |
| Quiescent Current (Enabled) | — | 270 uA |
| ESD Rating (DM/DP) | — | 8 kV HBM |
| USB Data Switch | — | USB 2.0 High-Speed (D+/D-) |
| Charging Standards | — | BC1.2 CDP/DCP, YD/T 1591-2009, Auto non-BC1.2 modes |
| 工作溫度 | — | -40 C to +125 C |
| Protection Features | — | Overcurrent, Over-temperature, Under-voltage lockout, Output discharge |
| UL Recognition | — | E169910 (CB Certified - Pending) |