10M04DAF256A7G - MAX 10 FPGA 4K LE, 256-LBGA | Intel
MPN: 10M04DAF256A7G ✓ Hoạt động10M04DAF256A7G Tóm tắt
A Field Programmable Gate Array (FPGA) is a type of integrated circuit whose logic function is defined by the user after manufacturing, composed of programmable logic blocks (LEs/LUTs), programmable interconnect, and dedicated hard-IP such as block memory, DSP/multiplier blocks, and I/O serdes. FPGAs sit at the top of the programmable-logic hierarchy: FPGA > CPLD > PLD > programmable logic > semiconductor. The MAX 10 family is Intel's smallest non-volatile FPGA line, optimized for I/O expansion, bridging, instant-on control, and low-power glue logic.
Key features include 4,000 logic elements, 250 Kbits of user flash memory, 178 Kbits of embedded SRAM (M9K blocks), up to 250 user I/O pins, integrated ADC blocks, and support for LVDS, LVCMOS, SSTL, and RSDS I/O standards. The 256-LBGA package exposes a high pin count in a 17x17 mm footprint, enabling dense PCB integration for industrial control and bridge applications.
The MAX 10 architecture uses a Logic Element (LE) built around a 4-input fracturable LUT, paired with dedicated 9 Kbit M9K memory blocks, 18x18 hardware multipliers, and on-chip flash for instant-on configuration. Configuration is stored in internal flash, allowing the device to operate in single-chip mode without external boot memory.
Typical applications include industrial I/O expansion and bridging, motor control and drive interfacing, video/display bridge logic, portable instrumentation, and low-volume ASIC prototyping. The integrated ADC and instant-on capability also suit sensor-fusion front-ends.
When designing with this device, ensure PCB power decoupling follows Intel's MAX 10 hardware reference design with bulk and 0.1 uF/0.01 uF capacitor networks at each supply pin. The configuration flash eliminates external PROMs but requires Quartus Prime programmer support for JTAG or in-system updates.
This page synthesizes distributor pricing, parametric comparison, and practical design notes that go beyond what the manufacturer datasheet alone provides.
Bộ thay thế dễ dàng lắp đặt cho 10M04DAF256A7G — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 10M04DAF256A7G (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, User Flash Memory, RoHS Status, Logic Elements (LE).
10M04DAF256C8G
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
10M04DCF256A7G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →10M04DCF256C8G
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
10M04DAF256A7G Tỷ lệ tối đa & tính chất điện
| Family | MAX 10 |
| Logic Elements (LE) | 4,000 |
| Adaptive Logic Modules (ALM) | Not applicable (MAX 10 uses 4-input LUT LE architecture) |
| Embedded Memory (M9K bits) | 178 Kbit |
| User Flash Memory | 250 Kbit (typical for MAX 10 04 family) |
| Embedded 18x18 Multipliers | Yes (MAX 10 DSP blocks) |
| Maximum User I/O Pins | 250 (package-dependent) |
| Process Technology | 55 nm TSMC low-power CMOS |
| Hộp | 256-LBGA (FineLine BGA, 17x17 mm) |
| Kiểu lắp đặt | Surface Mount (BGA) |
| Operating Temperature Grade | Automotive / Industrial (A7G = -40C to +125C TJ) |
| Configuration Method | On-chip flash (instant-on, single-chip mode) |
| Integrated ADC | Yes (MAX 10 ADC blocks) |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Programming Interface | JTAG / Quartus Prime |
Hướng dẫn cấu hình chân 10M04DAF256A7G 256-lbga (fineline bga, 17x17 mm)
Cấu hình chân cho 10M04DAF256A7G (256-lbga (fineline bga, 17x17 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho 10M04DAF256A7G.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
10M04DAF256A7G phù hợp cho 6 Áp dụngs: Industrial I/O Expansion and Bridging, Motor Control and Drive Interface, Video and Display Bridge Logic, Portable Test and Measurement Instrumentation, Low-Volume ASIC Prototyping, Sensor Fusion and IoT Edge Front-Ends.
Industrial I/O Expansion and Bridging
The 10M04DAF256A7G is well suited for industrial I/O expansion and bridging because its 4,000 logic elements and up to 250 user I/O pins provide ample glue-logic capacity to translate between LVCMOS, LVDS, and SSTL domains in motor drives and PLC backplanes. The MAX 10 instant-on flash configuration means the FPGA is live within milliseconds of power-up, eliminating the boot delay of SRAM-based FPGAs. The 256-LBGA footprint exposes a high pin count for parallel bus expansion and field-bridge glue logic.
Được đề xuất
Motor Control and Drive Interface
The 10M04DAF256A7G fits motor-control interface boards because the MAX 10 integrated ADC and 18x18 hardware multipliers can sample current/voltage feedback while the 4,000 LEs run space-vector PWM and field-oriented-control state machines. On-chip configuration flash lets the drive firmware boot in <100 ms for safety-critical machine startups. The 256-LBGA package supports the high pin count needed for parallel encoder and resolver interfaces.
Được đề xuất
Video and Display Bridge Logic
The 10M04DAF256A7G works as a video/display bridge because its 250 user I/O pins can carry parallel RGB, LVDS, or MIPI DSI lanes between SoCs and TFT panels while the 178 Kbits of M9K memory buffers line-doubling operations. Per the MAX 10 handbook, LVDS rates up to 840 Mbps are supported, sufficient for 1080p bridging. The BGA package's short bond wires maintain signal integrity for sub-100 ps edge rates.
Được đề xuất
Portable Test and Measurement Instrumentation
The 10M04DAF256A7G is ideal for portable instruments because the integrated ADC blocks sample analog signals without an external ADC, while the 4,000 LEs implement DSP filters, FFT engines, and trigger logic in a single device. The MAX 10 instant-on flash configuration lets handheld instruments power up to a known good state without external PROMs, saving PCB area and bill-of-materials cost. The 256-LBGA exposes enough I/O for parallel LCD and keypad interfaces.
Được đề xuất
Low-Volume ASIC Prototyping
The 10M04DAF256A7G serves as a low-volume ASIC prototype because the 4,000 LEs and 178 Kbits M9K memory emulate small ASIC blocks, while the on-chip configuration flash allows rapid design iteration via JTAG. Quartus Prime supports pin-out migration from F256 to other MAX 10 packages, easing the path from prototype to mid-volume MAX 10 production. The 256-LBGA offers a realistic BGA footprint that matches production package thermal and routing constraints.
Được đề xuất
Sensor Fusion and IoT Edge Front-Ends
The 10M04DAF256A7G suits sensor-fusion edge nodes because the integrated ADC blocks digitize analog sensors while the 4,000 LEs run Kalman filters, threshold logic, and protocol stacks (I2C/SPI/UART). MAX 10 instant-on flash lets the edge node boot and stream valid data within milliseconds of power-up, critical for battery-powered event-driven sensing. The 256-LBGA exposes enough I/O for multi-sensor fan-out.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 10M04DAF256A7G — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 10M04DAF256C8G | 10M04DCF256A7G | 10M04DCF256C8G |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 256-LBGA (17x17 mm) | 256-LBGA (17x17 mm) - same | 256-LBGA (17x17 mm) - same | 256-LBGA (17x17 mm) - same |
| Logic Elements | 4,000 | 4,000 - same | 4,000 - same | 4,000 - same |
| Embedded Memory | 178 Kbit (M9K) | 178 Kbit - same | 178 Kbit - same | 178 Kbit - same |
| User Flash | 250 Kbit | 250 Kbit - same | 250 Kbit - same | 250 Kbit - same |
| Temperature Grade | Automotive (-40C to +125C TJ) | Commercial (0C to +85C TJ) | Automotive (-40C to +125C TJ) | Commercial (0C to +85C TJ) |
| Speed/Grade | DA grade (A7) | DA grade (C8) | DC grade (A7) | DC grade (C8) |
| Configuration | On-chip flash (instant-on) | On-chip flash - same | On-chip flash - same | On-chip flash - same |
| Integrated ADC | Yes (MAX 10 ADC) | Yes - same | Yes - same | Yes - same |
Bảo phân biệt quan trọng
- On-chip configuration flash with instant-on boot (vsCyclone 10 LP (10CL016YU256C8G))
- Integrated ADC blocks eliminate external ADC (vsLattice MachXO2 (LCMXO2-256))
- Highest logic density in MAX 10 04 family with automotive grade (vsMAX 10 10M02DCU324A7G)
Ghi chú thiết kế
Estimated: at full I/O toggle and 50% logic utilization, the MAX 10 10M04 device draws ~300 mA from a 1.2 V core rail plus I/O current. Decouple each VCC/VCCIO pin pair with a 0.1 uF X7R ceramic in parallel with a 10 uF bulk capacitor, placed within 5 mm of the BGA via. Use a 4-layer PCB with a dedicated ground plane beneath the device to keep digital return paths short.
The 256-LBGA package has theta-JA around 15-20 C/W with standard 4-layer PCB design (per Intel MAX 10 thermal guide). At maximum 250 I/O toggle with capacitive loading, ensure junction temperature stays below 125 C for automotive A7G grade. Add thermal vias under the center BGA pads to the internal ground plane for additional heatsinking margin.
Use a 4-layer PCB with continuous ground and power planes. Escape the 1.0 mm pitch LBGA with microvias (0.1 mm laser via pad) plus 0.2 mm trace-and-space routing on outer layers. Per Intel layout guidelines, route all differential pairs (LVDS) with matched length within 150 mils and 100 ohm differential impedance. Place JTAG header within 2 inches of the JTAGEN and TCK pins for reliable in-system programming.
LVDS outputs on MAX 10 require a 100 ohm differential termination resistor at the receiver end. Series-PCB-trace impedance should match 50 ohm single-ended / 100 ohm differential. Avoid stubs on high-speed LVDS traces; route point-to-point with via-stitching ground returns beside the differential pair to suppress common-mode noise.
Do not assume the MAX 10 ADC inputs are 5 V tolerant - they are rated only to 3.3 V; add external resistive dividers or clamp diodes when interfacing 5 V sensors. Always assert CONF_DONE before releasing system reset to ensure the FPGA is fully configured. Per Intel errata, certain ADC channels share analog routing with specific GPIO banks - check the F256 pin-out file before final pin assignment.
Thông tin tuân thủ
RoHS and REACH compliance confirmed by distributor listings. AEC-Q100 qualification inferred from A7G temperature grade (-40C to +125C TJ) which corresponds to automotive-grade screening per Intel MAX 10 ordering guide.
