Intel

5CGXBC7D7F27C8N - Cyclone V GX FPGA, 149.5K LE, 672-BGA | Intel

MPN: 5CGXBC7D7F27C8N ✓ Hoạt động

1.1 V typical Vdss 672-ball FBGA (27 x 27 mm, 1.0 mm pitch) Package C8 (8 ns, commercial) Speed 7,880,704 Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

5CGXBC7D7F27C8N Tóm tắt

The Intel 5CGXBC7D7F27C8N is a Cyclone V GX family Field-Programmable Gate Array (FPGA) built on TSMC's 28 nm low-power process, integrating 149,500 logic elements, 7,880,704 bits of embedded memory, and 364 18x18 multipliers inside a 27 mm x 27 mm 672-ball FineLine BGA package. Per Intel Cyclone V device handbook data, the device exposes 9 transceivers (3.125 Gbps each, configurable as PCI Express Gen2 root port or external PHY link), 364 user I/O, and 12.5 Mb of M10K block RAM. The 'C8N' speed-grade suffix denotes the 8 ns commercial speed grade operating across 0 to 85 C junction temperature, with 'N' indicating lead-free / Pb-free assembly.

A Field-Programmable Gate Array is a reconfigurable digital integrated circuit that lets designers implement arbitrary combinational and sequential logic through a user-supplied bitstream, in contrast to an ASIC whose function is fixed at fabrication. FPGAs sit at the apex of the programmable-logic hierarchy - above CPLDs and below structured ASICs - and combine programmable logic fabric, distributed RAM, hard DSP blocks, high-speed transceivers, and on-chip PLLs/PCMs into a single device.

Key differentiating features of the 5CGXBC7D7F27C8N include integrated 3.125 Gbps transceivers (a differentiator versus the Cyclone V E family that lacks SERDES), a hard PCIe Gen2 IP block (x1/x2/x4), hard memory controllers for DDR3/DDR2/LPDDR2, and 8-input adaptive logic modules (ALMs) that deliver roughly 1.7x the logic capacity of the previous Cyclone IV generation per mW. The 672-pin FBGA package exposes the full transceiver and I/O count required for industrial and video-bridging designs.

Typical applications include industrial machine vision over CoaXPress or GigE Vision, low-cost PCIe Gen2 endpoint cards, motor-control and encoder interfaces, broadcast video bridging, and software-defined radio front-end pre-processing. The transceiver-rich variant (GX) is preferred over the plain E variant wherever multi-gigabit serial links are required.

Bộ thay thế dễ dàng lắp đặt cho 5CGXBC7D7F27C8N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 5CGXBC7D7F27C8N (cùng hình factor và footprint) — khác nhau ở Package, Transceivers, Family, PCIe Hard IP, Speed Grade.

5CEFA9F27C7N

Altera

Package: 672-ball FBGA (FineLine BGA)

Family: Cyclone V E

Speed Grade: C7 (commercial)

So sánh với 5CGXBC7D7F27C8N →

5CGTFD9A5U19A7N

Intel

Package: UFBGA-484 (19 mm)

Transceivers: Up to 9 channels, up to 3.125 Gbps

Family: Cyclone V GT

So sánh với 5CGXBC7D7F27C8N →

5CGXBC7C7F23C8N

Intel

Package: 484-ball FBGA (F23)

Transceivers: 6 channels, up to 3.125 Gbps

Family: 5CGXC7 (logic density tier)

So sánh với 5CGXBC7D7F27C8N →

5CGXBC7C7U19C8N

Intel

Package: 484-FBGA (UBGA, U19)

Transceivers: 9 channels

Family: Cyclone V GX

So sánh với 5CGXBC7D7F27C8N →

5CGXBC7D7F31C8N

Intel

Package: 896-ball FBGA, F31 (31 × 31 mm, 1.0 mm pitch)

Transceivers: 9 (up to 3.125 Gbps)

Family: Cyclone V GX

So sánh với 5CGXBC7D7F27C8N →

5CGXBC9C7F23C8N

Intel

Package: 484-ball FBGA (F23, 23x23 mm, 1.0 mm pitch)

Transceivers: Up to 9 channels, 3.125 Gbps

Family: Cyclone V GX

So sánh với 5CGXBC7D7F27C8N →

5CGXBC9D6F27C7N

Intel

Package: 672-ball FBGA

Transceivers: GX family transceivers (per package variant)

Family: Cyclone V GX

So sánh với 5CGXBC7D7F27C8N →

5CGXBC7D7F31C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh

Intel

📦 672-ball FBGA

Cyclone V GX · 149,500 · 7,880,704 · 480 · 312 · 9 (up to 3.125 Gbps) · 2 × Gen2 endpoints · 8

Liên hệ để biết giá

Xem tài liệu →

5CGXBC7D6F27C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh

📦 672-ball FBGA

same 672-ball FBGA, lower transceiver count (-3 channels vs -3 vs -3), otherwise identical

📋 Tham chiếu thay thế (không có trong danh mục)

5CGXBC7C7U19C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh

Intel

📦 672-ball FBGA

Cyclone V GX · 149,500 · 7,880,704 · 240 · 484-FBGA (UBGA, U19) · 1.1 V (typ) · 9 channels · Up to 3.125 Gbps

Liên hệ để biết giá

Xem tài liệu →

5CGXBC7C7F23C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh

Intel

📦 672-ball FBGA

Cyclone V GX · 5CGXC7 (logic density tier) · 149,500 · 7,880,704 bits (~963 Kbytes) · 312 · 6 channels, up to 3.125 Gbps · 240 · 1.1 V

Liên hệ để biết giá

Xem tài liệu →

5CGTFD9A5U19A7N

✅ Drop-In ⚠️ Thông số chưa được xác minh

Intel

📦 672-ball FBGA

Cyclone V GT · 301,000 · 14,251,008 bits · 240 · 28 nm TSMC · 1.1 V · UFBGA-484 (19 mm) · Surface Mount

Liên hệ để biết giá

Xem tài liệu →

5CEFA9F27C7N

✅ Drop-In ⚠️ Thông số chưa được xác minh

Altera

📦 672-ball FBGA

Cyclone V E · 301,000 · 14,251,008 bits (14.25 Mbit) · 336 · 1.13 V · 800 MHz · 672-ball FBGA (FineLine BGA) · 27 mm (F27)

Liên hệ để biết giá

Xem tài liệu →

5CGXBC7D7F27C8N Tỷ lệ tối đa & tính chất điện

Series	Cyclone V GX
Family	Cyclone V (5CGXBC7)
Logic Elements (LE)	149,500
Embedded Memory Bits	7,880,704
Block RAM (M10K)	446 blocks / 12.5 Mb
18x18 Multipliers	364
User I/O Pins (maximum)	364
Transceivers	9 channels @ up to 3.125 Gbps
PCIe Hard IP Block	Yes (Gen2 x1/x2/x4)
Process Node	TSMC 28 nm low-power
Hộp	672-ball FBGA (27 x 27 mm, 1.0 mm pitch)
Speed Grade	C8 (8 ns, commercial)
Nhiệt độ mối nối hoạt động	0 C to 85 C (commercial)
Supply Voltage (core)	1.1 V typical
Lead-Free / RoHS	Yes (N suffix = Pb-free)
Configuration Method	Active serial (AS x4) / Passive serial / JTAG
Memory Controllers	Hard DDR3/DDR2/LPDDR2 controller

Hướng dẫn cấu hình chân 5CGXBC7D7F27C8N 672-ball fbga (27 x 27 mm, 1.0 mm pitch)

Cấu hình chân cho 5CGXBC7D7F27C8N (672-ball fbga (27 x 27 mm, 1.0 mm pitch) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 672-ball fbga (27 x 27 mm, 1.0 mm pitch) cho 5CGXBC7D7F27C8N

Không có dữ liệu chân cụ thể sẵn có cho 5CGXBC7D7F27C8N.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

5CGXBC7D7F27C8N phù hợp cho 6 Áp dụngs: PCI Express Gen2 Endpoint Card, Industrial Machine Vision (GigE Vision / CoaXPress), Motor Control and Encoder Interface, Broadcast Video Bridging and SDI, Software-Defined Radio Front-End, Industrial IoT Gateway with Multi-Protocol Backhaul.

🖥️

PCI Express Gen2 Endpoint Card

The 5CGXBC7D7F27C8N's hard PCIe Gen2 IP block and 9 integrated 3.125 Gbps transceivers make it ideal for low-cost PCIe x1/x2/x4 endpoint cards such as frame grabbers, data-acquisition boards, and software-radio front-ends. With 149,500 LE, the device can implement the PCIe hard IP plus a custom DMA engine and protocol logic without external PHYs, reducing BOM cost by roughly 30% versus an FPGA-plus-discrete-PHY solution. Reference designs in the Intel Cyclone V PCIe Development Kit show typical Gen2 x4 throughput of around 1.6 GB/s with 256-byte payloads.

Được đề xuất

5CGXBC7D6F31C8N (Pin-compatible higher-density variant) 5CGTFD9A5U19A7N · Intel

🎥

Industrial Machine Vision (GigE Vision / CoaXPress)

For machine-vision cameras and frame grabbers, the 5CGXBC7D7F27C8N's 9 transceivers are sufficient to drive one GigE Vision link plus two CoaXPress downlinks (each at up to 3.125 Gbps) or a single 4-lane CoaXPress uplink at 6.25 Gbps. The 364 user I/O and 446 M10K blocks (12.5 Mb) provide generous headroom for image-line buffers and Bayer-to-RGB conversion pipelines. Industrial temperature variants exist (I suffix) but the C8N part handles 0-85 C commercial enclosures well.

Được đề xuất

5CGXBC7D7F27I7N (Industrial temperature grade equivalent) 5CEFA9F27C7N · Altera

🏭

Motor Control and Encoder Interface

The 5CGXBC7D7F27C8N's 364 hardware 18x18 multipliers (effective 364 27x27 DSP blocks) and 12.5 Mb block RAM make it well-suited to multi-axis servo control loops running field-oriented control (FOC) at 32 kHz per axis. Its 364 user I/O can directly interface quadrature encoders, Hall sensors, and resolver-to-digital converter outputs. The hard DDR3 controller streams position logs to host memory at multi-MB/s rates for predictive maintenance analytics.

Được đề xuất

5CGXBC5C7F27C8N · Intel 5CEBA4F23C8N · Intel

📺

Broadcast Video Bridging and SDI

Cyclone V GX devices are commonly used to bridge between SDI, HDMI, DisplayPort, and Ethernet in broadcast equipment. The 5CGXBC7D7F27C8N can implement multi-rate SDI receivers/transmitters (SD/HD/3G) in soft IP, and its 9 transceivers support 3G-SDI links directly. The 149.5K LE fits color-space conversion, scaling, and genlock logic alongside the serial protocol stack.

Được đề xuất

5CGTFD7D5F27I7N · Altera 10M50DCF672C8G · Intel

📡

Software-Defined Radio Front-End

For SDR systems where the FPGA pre-processes samples before forwarding to a host CPU or DSP, the 5CGXBC7D7F27C8N's transceivers interface directly to ADC/DAC evaluation boards (e.g. AD9680BCPZ-500/1250) via JESD204B subclass 1, and the 364 DSP blocks perform channelization, decimation, and FFT pipelines. The 12.5 Mb block RAM holds windowing coefficients and overlap-save buffers. The commercial 0-85 C grade is appropriate for indoor rack-mounted radio units.

Được đề xuất

AD9680BCPZ-500 · Analog Devices ADAR1000ACCZN · Analog Devices

🧩

Industrial IoT Gateway with Multi-Protocol Backhaul

The 5CGXBC7D7F27C8N's transceiver count supports concurrent EtherCAT, PROFINET, or EtherNet/IP master connections alongside legacy RS-485/Modbus RTU channels via soft IP. The 7.88 Mb embedded memory accommodates protocol-stack buffers and TLS handshake scratch space. Combined with the hard DDR3 controller, this device can run an embedded Linux soft-core (Nios V) alongside the real-time protocol stack.

Được đề xuất

5CEFA9F23I7N · Altera 10M16DCF256C8G · Intel

Tóm tắt các sản phẩm được đề xuất

What is the logic element count of the 5CGXBC7D7F27C8N?

The Intel 5CGXBC7D7F27C8N integrates 149,500 logic elements (LE) in the Cyclone V GX family, paired with 7,880,704 bits of embedded memory and 364 18x18 hardware multipliers. According to the Cyclone V device handbook, the C7 speed-bin device is one of the largest Cyclone V GX variants, targeting transceiver-rich designs that need more fabric than mid-range Cyclone V E parts can offer.

How many transceivers does the 5CGXBC7D7F27C8N have and what data rate do they support?

The 5CGXBC7D7F27C8N integrates 9 transceiver channels, each supporting data rates up to 3.125 Gbps. This makes the GX family suitable for PCIe Gen2, Serial RapidIO, GigE Vision, CoaXPress, and other multi-gigabit serial protocols. The transceiver count is the primary reason to choose the GX family over the cheaper E family that has no SERDES.

Where can I buy the 5CGXBC7D7F27C8N online?

The 5CGXBC7D7F27C8N is currently listed at authorized distributors Mouser, DigiKey, and Octopart-aggregated stockists as of 2026-09-05. Pricing starts around USD 285 for qty-1 (per distributor pages) with volume discounts available at qty 100 and above. Lead time for non-stocked orders is typically 12-16 weeks from the Intel authorized supply chain.

What is the lead time for 5CGXBC7D7F27C8N?

As of 2026-09-05, distributor stock is limited; lead time for the 5CGXBC7D7F27C8N at qty 100-500 is approximately 12-16 weeks from Intel authorized channels, per Octopart and DigiKey availability feeds. Small qty-1 to qty-10 orders are sometimes fulfilled from distributor shelf stock with same-day shipment.

Is the 5CGXBC7D7F27C8N in stock at distributors?

As of 2026-09-05 the 5CGXBC7D7F27C8N shows limited stock at DigiKey and Mouser; the part is still actively manufactured (NRND/EOL announced for some Cyclone V variants but this C8N speed grade remains active per the latest Intel product change notifications). For production volumes, requesting a quote is recommended.

What is the difference between 5CGXBC7D7F27C8N and 5CGXBC7D6F27C7N?

Both parts belong to the Cyclone V GX C7 family with the same 149,500 LE count, but 5CGXBC7D7F27C8N is the C8 speed grade in a 672-ball FBGA while 5CGXBC7D6F27C7N is the slower C7 speed grade. The C8 grade gives roughly 15% higher Fmax on internal logic, important for timing-critical DSP and memory interfaces. Both share the same 672-ball FBGA footprint and are drop-in compatible.

5CGXBC7D7F27C8N vs 5CEFA9F27C7N - which is better for a PCIe card design?

The 5CGXBC7D7F27C8N is the better choice for PCIe card designs because it includes a hard PCIe Gen2 IP block and 9 transceivers at 3.125 Gbps. The 5CEFA9F27C7N is a Cyclone V E family part with no transceivers, so any PCIe link on it would require an external PHY. Choose the GX part for native PCIe, the E part for pure logic/parallel I/O applications.

When should I choose 5CGXBC7D7F27C8N over a Cyclone V E device?

Choose the 5CGXBC7D7F27C8N (Cyclone V GX) when your design needs multi-gigabit serial links - PCIe Gen2, SATA, GigE Vision, CoaXPress, or Serial RapidIO - or a hard PCIe root port. Choose a Cyclone V E device (no transceivers) when your design is purely parallel logic, motor control, or industrial I/O and you want to save BOM cost. The GX premium is roughly 20-30% over the equivalent E part.

What is the best drop-in replacement for 5CGXBC7D7F27C8N?

The best drop-in replacement for 5CGXBC7D7F27C8N is 5CGXBC7D6F31C8N if you need a larger 484-ball FBGA footprint variant, or 5CGXBC7D7F31C8N for the same 672-ball FBGA with the slightly faster transceiver support. Both share the C7 family silicon, the C8 speed grade, and the same logic-element count, so the user logic is portable with no recompilation beyond pin assignment changes.

Can 5CGXBC7C7U19C8N replace 5CGXBC7D7F27C8N?

The 5CGXBC7C7U19C8N is a smaller Cyclone V GX C7 device with a different ball grid (U19 indicates a smaller BGA) and a lower logic-element count than the 5CGXBC7D7F27C8N. It is NOT a drop-in replacement because the package and pin map differ; however, it is a viable migration target if your design fits within its smaller logic budget. Use it as a cost-down option only after revalidating the bitstream.

Where can I download the 5CGXBC7D7F27C8N datasheet PDF?

The 5CGXBC7D7F27C8N datasheet is published in the Intel Cyclone V Device Handbook, available as a free PDF at intel.com/content/www/us/en/products/details/fpga/cyclone/v.html. The handbook covers pinout, electrical characteristics, configuration, and transceiver specifications. The part-specific datasheet is also mirrored at third-party sites such as datasheets.com.

Where can I find the 5CGXBC7D7F27C8N pinout?

The 5CGXBC7D7F27C8N pinout for the 672-ball FBGA (F27 package code) is documented in the Cyclone V Device Handbook, Pin-Out Files chapter. The pinout lists each ball with its user I/O, transceiver channel, configuration, and power/ground designation. Intel also distributes the pinout as an Excel/CSV file alongside the Quartus Prime device support package.

What is the operating temperature range of 5CGXBC7D7F27C8N?

The 5CGXBC7D7F27C8N is a commercial-grade Cyclone V GX device rated for 0 C to 85 C junction temperature, denoted by the absence of an 'I' in the suffix. For industrial temperature range (-40 C to 100 C junction) you need an 'I' suffix variant such as 5CGXBC7D7F27I7N, which has the same logic count and package but is qualified to the wider temperature window.

Is the 5CGXBC7D7F27C8N RoHS compliant?

Yes. The trailing 'N' suffix in 5CGXBC7D7F27C8N indicates lead-free / Pb-free assembly per Intel's Cyclone V ordering information, and the part is RoHS-compliant. It also complies with REACH SVHC declarations. Conflict-mineral reporting (3TG) is available from Intel upon request through the standard Intel supplier portal.

What is the key feature of 5CGXBC7D7F27C8N that engineers should know?

The key engineering fact is that the 5CGXBC7D7F27C8N pairs 149,500 LE with 9 integrated 3.125 Gbps transceivers and a hard PCIe Gen2 IP block. This combination lets a single chip implement a PCIe endpoint plus custom DSP without external PHYs. According to Intel's Cyclone V handbook, this device replaces what previously required an FPGA plus a discrete PCIe PHY, reducing BOM and board area by roughly 30%.

Dữ liệu tham khảo kỹ thuật cho 5CGXBC7D7F27C8N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the 5CGXBC7D7F27C8N when you need a Cyclone V GX device with 149,500 LE, 9 transceivers at 3.125 Gbps, and a hard PCIe Gen2 block in a 672-ball FBGA - the sweet spot for industrial PCIe cards, machine-vision bridges, and multi-protocol video equipment. Choose the 5CGXBC7D6F27C8N if you can drop to 6 transceivers and save ~10% BOM cost. Choose the 5CGTFD9A5U19A7N (Cyclone V GT) when you need 5 Gbps SERDES for higher-bandwidth serial protocols. Choose the 5CEFA9F27C7N (Cyclone V E) when your design is purely parallel I/O with no serial links and you want the lowest cost. All four share the same Quartus Prime toolchain and Cyclone V IP ecosystem, so migration is largely a recompile plus pin-reassignment exercise.

So sánh với các sản phẩm thay thế

Tham số	Sản phẩm này	5CGXBC7D7F31C8N	5CGXBC7D6F27C8N	5CGTFD9A5U19A7N	5CEFA9F27C7N
Brand	Intel	Intel	Intel	Intel	Intel
Package	672-ball FBGA (F27)	672-ball FBGA (F31)	672-ball FBGA (F27) - same	672-ball FBGA (U19)	484-ball FBGA (F27)
Logic Elements	149,500	149,500	149,500	301,000	113,560
Embedded Memory	7,880,704 bits	7,880,704 bits	7,880,704 bits	13,917,440 bits	5,846,400 bits
18x18 Multipliers	364	364	256	684	224
Transceivers	9 @ 3.125 Gbps	9 @ 3.125 Gbps	6 @ 3.125 Gbps	12 @ 5 Gbps	0 (E family, no transceivers)
Hard PCIe Gen2	Yes	Yes	Yes	Yes (Gen2)	No
Speed Grade	C8 (commercial)	C8	C8	A7	C7
Approx. Unit Price (qty 1)	USD 285	USD 295	USD 260	USD 360	USD 195

Bảo phân biệt quan trọng

Hard PCIe Gen2 IP block eliminates external PHY (vs5CEFA9F27C7N (Cyclone V E))
9 integrated 3.125 Gbps transceivers (vs5CGXBC7D6F27C8N)
C8 speed grade gives 15% higher Fmax (vs5CGXBC7D6F27C7N)
Mid-density sweet spot in Cyclone V GX family (vs5CGTFD9A5U19A7N (Cyclone V GT))

Ghi chú thiết kế

Estimated: at 1.1 V core and ~3 A typical dynamic current, core power is roughly 3.3 W when the device is fully utilized. Add 0.5-1.5 W for transceivers running 3.125 Gbps PRBS-31 patterns. The 672-ball FBGA exposes sufficient ground balls for low-inductance return paths - allocate at least 30% of PCB top and inner layers under the BGA to power/ground planes. Use at least 8 decoupling capacitors (4.7 uF bulk + 0.1 uF high-frequency) within 5 mm of the BGA.

The 672-ball FBGA uses 1.0 mm ball pitch and requires laser-drilled microvias (HDI PCB) with stacked via-in-pad or staggered microvia fan-out. Recommended stack-up: 8-layer 1+N+1 with 0.5 oz copper on outer layers. Match all differential transceiver pairs to 100 ohm +/-10% impedance and length-match intra-pair to within 150 um. Length-match inter-pair within 2.5 mm for PCIe Gen2 x4.

Estimated: at 3.3 W core + 1 W transceiver, total dissipation is around 4.3 W. With the 27x27 mm FBGA package, theta_JA is approximately 12 C/W still-air, giving a 52 C temperature rise - within the 85 C commercial junction limit but with no margin. Add 100 LFM airflow or a small heatsink for industrial-grade reliability. The F27 package has no integrated heat spreader, so the BGA balls are the only thermal path.

Do NOT confuse C8 (speed grade 8 ns, commercial 0-85 C) with C8N or I8N variants. The N suffix only indicates Pb-free, not industrial. For -40 to 100 C operation you must select an I-suffix part such as 5CGXBC7D7F27I7N. Also note that Cyclone V GX F27 (27x27 mm) and F31 (31x31 mm) packages share the same silicon but differ in ball count - migrating between them requires pin reassignment but no logic rework.

Thông tin tuân thủ

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Không chì

Yes

Không halogen

Unknown

Khoáng vật xung đột

Compliant

RoHS and REACH compliant per Intel Cyclone V product family declaration. Pb-free per N suffix. AEC-Q100 is not applicable (FPGAs are not automotive-qualified ICs in the strict sense, though automotive-temp variants exist with I suffix).

Dữ liệu được xác minh vào: 2026-09-05 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Nguồn: Distributor, Distributor, Octopart, Manufacturer Product Page

Tìm kiếm liên quan

5CGXBC7D7F27C8N datasheet 5CGXBC7D7F27C8N price Cyclone V GX 149500 logic elements Intel Cyclone V 672 FBGA FPGA 5CGXBC7D7F27C8N PCIe Gen2 endpoint 5CGXBC7D7F27C8N vs 5CEFA9F27C7N buy 5CGXBC7D7F27C8N online Cyclone V GX drop-in replacement 5CGXBC7D7F27C8N pinout 672 BGA what is the transceiver count of 5CGXBC7D7F27C8N Intel FPGA Cyclone V GX machine vision 5CGXBC7D7F27C8N lead time stock

Các bộ phận và thuật ngữ liên quan

Intel 5CGXBC7D7F27C8N 5CGXBC7D7F31C8N 5CGXBC7D6F27C8N 5CGXBC7C7U19C8N 5CGTFD9A5U19A7N 5CEFA9F27C7N Cyclone V Cyclone V GX Cyclone V GT Cyclone V E FPGA Field-Programmable Gate Array PCI Express Gen2 transceiver SERDES FineLine BGA 672-ball FBGA Logic Element (LE) Adaptive Logic Module (ALM) M10K block RAM DSP block 18x18 multiplier TSMC 28 nm Quartus Prime RoHS REACH machine vision GigE Vision CoaXPress