DSP56303AG100R2 - 100MHz 24-Bit DSP, 144-LQFP | NXP
MPN: DSP56303AG100R2 ✗ Cuối đờiDSP56303AG100R2 Tóm tắt
A digital signal processor (DSP) is a specialized microprocessor architecture optimized for the rapid arithmetic operations required by digital filters, codecs, modems, and audio/speech algorithms. Unlike general-purpose CPUs, DSPs feature single-cycle multipliers, dedicated accumulators, and Harvard-style memory architectures that allow simultaneous program and data fetches. The DSP56300 family specifically introduced an object-oriented programming model and aggressive clocking (up to 150 MHz in later siblings) to enable a new generation of wireless, telecommunications, and multimedia products.
Key features of the DSP56303AG100R2 include the 100 MHz core clock, on-chip Host Interface (HI08), two Enhanced Synchronous Serial Interfaces (ESSI), a Serial Communications Interface (SCI), and a 24-bit data path with hardware DO/LOOP hardware accelerators. The 1.8 V core / 3.3 V I/O split-rail design reduces power dissipation while maintaining compatibility with 3.3 V external logic, and the wide operating temperature range supports industrial-grade deployments.
Architecturally, the DSP56303 implements a 24-bit data ALU with a 56-bit accumulator, supporting fractional two's-complement arithmetic natively. The integrated Memory Expansion Area allows external program and data memory to be mapped linearly, simplifying glue-logic design. The peripheral set (ESSI/SCI/HI08/Timer) is accessed through a unified interrupt controller that supports prioritized, vectored interrupts, minimizing ISR latency for real-time control loops.
Typical applications include multi-line voice/data/fax processing, video conferencing endpoints, professional audio processing, general-purpose digital control systems, and embedded modems. The 100 MHz speed grade is well suited to voice-band codecs and basic speech recognition tasks, while remaining within the thermal envelope of a fan-less enclosure.
When designing with this device, allocate PCB real estate for the external memory bus; even with 24 KB on-chip RAM, many telecom workloads require an external SRAM or SDRAM. Decoupling must follow the datasheet recommendations (typically 0.1 µF + bulk per rail) and JTAG boundary-scan access should be brought out for production test.
This page synthesizes distributor stock and lead-time signals, cross-references drop-in alternatives, and supplies practical design notes not found in the bare manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho DSP56303AG100R2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DSP56303AG100R2 (cùng hình factor và footprint) — khác nhau ở Package, Serial Interfaces, Timers.
DSP56303AG100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSP56303AG100B
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSP56301AG80
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DSP56302AG100
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSP56311AG150
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSPB56367AG150
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DSP56303AG100R2 Thông số kỹ thuật
| Core Architecture | DSP56300 family, 24-bit fixed-point |
| Core Clock Frequency | 100 MHz |
| Instruction Throughput | 100 MIPS |
| Data Path Width | 24-bit ALU with 56-bit accumulator |
| On-Chip Data RAM | 24 KB |
| Bootstrap ROM | 576 B |
| External Memory Expansion | Yes (Program, X-data, Y-data) |
| Host Interface | HI08 (8-bit parallel host port) |
| Serial Interfaces | 2x ESSI, 1x SCI |
| Timers | Triple Timer module |
| Core Supply Voltage | 1.8 V (typical) |
| I/O Supply Voltage | 3.3 V |
| Hộp | 144-LQFP (20x20 mm) |
| Kiểu lắp đặt | Surface Mount |
Cấu hình chân DSP56303AG100R2
| Chân 1 | VDD — Core 1.8 V supply |
| Chân 2 | GND — Ground |
| Chân 3 | TA — Transfer Acknowledge (external memory) |
| Chân 4 | TEA — Transfer Error Acknowledge |
| Chân 5 | BR — Bus Request |
| Chân 6 | BG — Bus Grant |
| Chân 7 | BB — Bus Busy |
| Chân 8 | GND — Ground |
| Chân 9 | VDD_IO — I/O 3.3 V supply |
| Chân 10 | RESET — Hardware reset (active low) |
| Chân 11 | MODA — Mode select A (bootstrap) |
| Chân 12 | MODB — Mode select B (bootstrap) |
| Chân 13 | MODC — Mode select C (bootstrap) |
| Chân 14 | MODD — Mode select D (bootstrap) |
| Chân 15 | TCK — JTAG Test Clock |
| Chân 16 | TMS — JTAG Test Mode Select |
| Chân 17 | TDI — JTAG Test Data In |
| Chân 18 | TDO — JTAG Test Data Out |
| Chân 19 | TRST — JTAG Test Reset (active low) |
| Chân 20 | DE — Debug Event |
| Chân 21 | GND — Ground |
| Chân 22 | VDD — Core 1.8 V supply |
| Chân 23 | H0 — Host Interface data bit 0 |
| Chân 24 | H1 — Host Interface data bit 1 |
| Chân 25 | H2 — Host Interface data bit 2 |
| Chân 26 | H3 — Host Interface data bit 3 |
| Chân 27 | H4 — Host Interface data bit 4 |
| Chân 28 | H5 — Host Interface data bit 5 |
| Chân 29 | H6 — Host Interface data bit 6 |
| Chân 30 | H7 — Host Interface data bit 7 |
| Chân 31 | HR/W — Host Read/Write |
| Chân 32 | HEN — Host Enable (active low) |
| Chân 33 | HREQ — Host Request |
| Chân 34 | HACK — Host Acknowledge (active low) |
| Chân 35 | GND — Ground |
| Chân 36 | VDD_IO — I/O 3.3 V supply |
| Chân 37 | SC0 — ESSI0 Serial Control 0 |
| Chân 38 | SCK0 — ESSI0 Serial Clock 0 |
| Chân 39 | SRD0 — ESSI0 Serial Receive Data 0 |
| Chân 40 | STD0 — ESSI0 Serial Transmit Data 0 |
| Chân 41 | SC1 — ESSI1 Serial Control 1 |
| Chân 42 | SCK1 — ESSI1 Serial Clock 1 |
| Chân 43 | SRD1 — ESSI1 Serial Receive Data 1 |
| Chân 44 | STD1 — ESSI1 Serial Transmit Data 1 |
| Chân 45 | SCLK — SCI Serial Clock |
| Chân 46 | TXD — SCI Transmit Data |
| Chân 47 | RXD — SCI Receive Data |
| Chân 48 | GND — Ground |
| Chân 49 | TIO0 — Timer 0 I/O |
| Chân 50 | TIO1 — Timer 1 I/O |
| Chân 51 | TIO2 — Timer 2 I/O |
| Chân 52 | VDD — Core 1.8 V supply |
| Chân 53 | GND — Ground |
| Chân 54 | A0 — Address bus bit 0 |
| Chân 55 | A1 — Address bus bit 1 |
| Chân 56 | A2 — Address bus bit 2 |
| Chân 57 | A3 — Address bus bit 3 |
| Chân 58 | A4 — Address bus bit 4 |
| Chân 59 | A5 — Address bus bit 5 |
| Chân 60 | A6 — Address bus bit 6 |
| Chân 61 | A7 — Address bus bit 7 |
| Chân 62 | A8 — Address bus bit 8 |
| Chân 63 | A9 — Address bus bit 9 |
| Chân 64 | A10 — Address bus bit 10 |
| Chân 65 | A11 — Address bus bit 11 |
| Chân 66 | A12 — Address bus bit 12 |
| Chân 67 | A13 — Address bus bit 13 |
| Chân 68 | A14 — Address bus bit 14 |
| Chân 69 | A15 — Address bus bit 15 |
| Chân 70 | A16 — Address bus bit 16 |
| Chân 71 | A17 — Address bus bit 17 |
| Chân 72 | A18 — Address bus bit 18 |
| Chân 73 | A19 — Address bus bit 19 |
| Chân 74 | VDD_IO — I/O 3.3 V supply |
| Chân 75 | GND — Ground |
| Chân 76 | PAB0 — Program Address Bus bit 0 / shared |
| Chân 77 | PAB1 — Program Address Bus bit 1 / shared |
| Chân 78 | PAB2 — Program Address Bus bit 2 / shared |
| Chân 79 | PDB0 — Program Data Bus bit 0 |
| Chân 80 | PDB1 — Program Data Bus bit 1 |
| Chân 81 | PDB2 — Program Data Bus bit 2 |
| Chân 82 | PDB3 — Program Data Bus bit 3 |
| Chân 83 | PDB4 — Program Data Bus bit 4 |
| Chân 84 | PDB5 — Program Data Bus bit 5 |
| Chân 85 | PDB6 — Program Data Bus bit 6 |
| Chân 86 | PDB7 — Program Data Bus bit 7 |
| Chân 87 | PDB8 — Program Data Bus bit 8 |
| Chân 88 | PDB9 — Program Data Bus bit 9 |
| Chân 89 | PDB10 — Program Data Bus bit 10 |
| Chân 90 | PDB11 — Program Data Bus bit 11 |
| Chân 91 | PDB12 — Program Data Bus bit 12 |
| Chân 92 | PDB13 — Program Data Bus bit 13 |
| Chân 93 | PDB14 — Program Data Bus bit 14 |
| Chân 94 | PDB15 — Program Data Bus bit 15 |
| Chân 95 | PDB16 — Program Data Bus bit 16 |
| Chân 96 | PDB17 — Program Data Bus bit 17 |
| Chân 97 | PDB18 — Program Data Bus bit 18 |
| Chân 98 | PDB19 — Program Data Bus bit 19 |
| Chân 99 | PDB20 — Program Data Bus bit 20 |
| Chân 100 | PDB21 — Program Data Bus bit 21 |
| Chân 101 | PDB22 — Program Data Bus bit 22 |
| Chân 102 | PDB23 — Program Data Bus bit 23 |
| Chân 103 | GND — Ground |
| Chân 104 | VDD — Core 1.8 V supply |
| Chân 105 | GDB0 — Global/X Data Bus bit 0 |
| Chân 106 | GDB1 — Global/X Data Bus bit 1 |
| Chân 107 | GDB2 — Global/X Data Bus bit 2 |
| Chân 108 | GDB3 — Global/X Data Bus bit 3 |
| Chân 109 | GDB4 — Global/X Data Bus bit 4 |
| Chân 110 | GDB5 — Global/X Data Bus bit 5 |
| Chân 111 | GDB6 — Global/X Data Bus bit 6 |
| Chân 112 | GDB7 — Global/X Data Bus bit 7 |
| Chân 113 | GDB8 — Global/X Data Bus bit 8 |
| Chân 114 | GDB9 — Global/X Data Bus bit 9 |
| Chân 115 | GDB10 — Global/X Data Bus bit 10 |
| Chân 116 | GDB11 — Global/X Data Bus bit 11 |
| Chân 117 | GDB12 — Global/X Data Bus bit 12 |
| Chân 118 | GDB13 — Global/X Data Bus bit 13 |
| Chân 119 | GDB14 — Global/X Data Bus bit 14 |
| Chân 120 | GDB15 — Global/X Data Bus bit 15 |
| Chân 121 | GDB16 — Global/X Data Bus bit 16 |
| Chân 122 | GDB17 — Global/X Data Bus bit 17 |
| Chân 123 | GDB18 — Global/X Data Bus bit 18 |
| Chân 124 | GDB19 — Global/X Data Bus bit 19 |
| Chân 125 | GDB20 — Global/X Data Bus bit 20 |
| Chân 126 | GDB21 — Global/X Data Bus bit 21 |
| Chân 127 | GDB22 — Global/X Data Bus bit 22 |
| Chân 128 | GDB23 — Global/X Data Bus bit 23 |
| Chân 129 | VDD_IO — I/O 3.3 V supply |
| Chân 130 | GND — Ground |
| Chân 131 | RD — Read strobe |
| Chân 132 | WR — Write strobe |
| Chân 133 | PS — Program Space select |
| Chân 134 | DS — Data Space select |
| Chân 135 | X/Y — X/Y memory space select |
| Chân 136 | AA — Address Acknowledge |
| Chân 137 | A20 — Address bus bit 20 |
| Chân 138 | A21 — Address bus bit 21 |
| Chân 139 | A22 — Address bus bit 22 |
| Chân 140 | A23 — Address bus bit 23 |
| Chân 141 | CAS — SDRAM Column Address Strobe |
| Chân 142 | RAS — SDRAM Row Address Strobe |
| Chân 143 | VDD — Core 1.8 V supply |
| Chân 144 | GND — Ground |
Ứng dụng tiêu biểu
DSP56303AG100R2 phù hợp cho 6 Áp dụngs: Multi-Line Voice/Data/Fax Processing, Video Conferencing Endpoint, Professional Audio Processing, Industrial Digital Control Systems, Embedded Modem and Wireline Transceiver, General-Purpose Embedded DSP Platform.
Multi-Line Voice/Data/Fax Processing
The DSP56303AG100R2's 100 MIPS budget, 24-bit ALU and dual ESSI ports make it a strong fit for multi-line voice/fax platforms. Each DSP56303 instance can comfortably run 2-4 channels of G.711/G.729 codec, echo cancellation, and DTMF detection concurrently within thermal envelope. The HI08 host port glues cleanly into an external host CPU or MPC860-style communications processor, allowing shared memory-based signaling. Compared with a generic MCU, the hardware DO/LOOP and bit-field instructions accelerate inner DSP loops by 5-10x, reducing BOM cost by eliminating external accelerators.
Được đề xuất
Video Conferencing Endpoint
For H.320/H.323 video conferencing endpoints, the DSP56303AG100R2 handles audio pre-processing (AGC, noise reduction, acoustic echo cancellation) plus multiplexing of voice and data channels. Its 100 MHz speed grade processes stereo 16 kHz audio at full algorithmic headroom, while the dual ESSI ports accept frame-aligned audio from a companion video codec ASIC. The 1.8 V core / 3.3 V I/O split-rail design simplifies integration with 3.3 V video peripherals, and the 24 KB on-chip RAM holds per-channel buffers without external SRAM.
Được đề xuất
Professional Audio Processing
Studio audio gear, multi-effects processors and digital mixers benefit from the DSP56303AG100R2's deterministic 100 MIPS throughput and 24-bit data path. Each instance runs parametric EQ, dynamics, and reverb algorithms for 4-8 audio channels at 48 kHz with headroom to spare. The 56-bit accumulator eliminates intermediate-word-growth concerns common in IIR filter cascades, while the 24-bit I/O preserves dynamic range beyond 16-bit CD quality. The SCI port connects to front-panel control MCUs for preset recall, simplifying external DSP chains.
Được đề xuất
Industrial Digital Control Systems
In servo drives, motor controllers and power-converter feedback loops, the DSP56303AG100R2's deterministic single-cycle multiply-accumulate and triple-timer module deliver real-time control bandwidth. The 100 MIPS budget supports field-oriented control (FOC) for 1-2 PMSM axes at 20 kHz PWM rates with current-loop closures under 5 µs. The HI08 host port accepts commands from an industrial MCU, and the ESSI ports interface to digital Hall/encoder sensors without external glue. The wide operating temperature supports factory-floor deployment.
Được đề xuất
Embedded Modem and Wireline Transceiver
The DSP56303AG100R2 implements V.90/V.92 soft-modem, ADSL front-end, and proprietary wireline codecs using its 100 MIPS and 24-bit signal integrity. The dual ESSI ports accept 16-bit sigma-delta ADC streams directly, while the SCI port manages handshake with the host CPU. The 24 KB on-chip RAM holds symbol tables and convolution buffers, eliminating the need for external SRAM in many designs. The 1.8 V core voltage keeps total power dissipation under 0.5 W typical, suitable for compact CPE enclosures.
Được đề xuất
General-Purpose Embedded DSP Platform
For custom signal-processing, instrumentation, and educational designs, the DSP56303AG100R2 offers a stable 100 MIPS platform with mature GNU and Tasking toolchains. The HI08 host port plus dual ESSI/SCI gives flexible host/sensor connectivity, and the JTAG port simplifies in-circuit debug. The 24 KB on-chip RAM suits prototype filter designs, and the external memory expansion bus accommodates cost-down to external SDRAM as designs scale. NXP's DSP56300 SDK provides reference filters, FFT kernels, and codec libraries to accelerate development.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DSP56303AG100R2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DSP56303AG100 | DSP56301AG80 | DSPB56367AG150 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Core Clock | 100 MHz | 100 MHz | 80 MHz (-20%) | 150 MHz (+50%) |
| Throughput | 100 MIPS | 100 MIPS | 80 MIPS | 150 MIPS |
| Host Interface | HI08 (8-bit) | HI08 (8-bit) | HI08 (8-bit) | HI08 (8-bit) + enhanced DMA |
| Serial Interfaces | 2x ESSI + 1x SCI | 2x ESSI + 1x SCI | 2x ESSI + 1x SCI | 2x ESSI + 1x SCI + extended peripherals |
| Timers | Triple Timer | Triple Timer | Dual Timer | Triple Timer + enhanced |
| Lifecycle Status | NRND | NRND | NRND | Active |
Bảo phân biệt quan trọng
- Industry-standard 100 MIPS DSP56300 family with mature Toolchain (vsDSP56301AG80)
- Active 150 MHz upgrade path within the same footprint (vsDSPB56367AG150)
- Split 1.8 V/3.3 V supply reduces power dissipation (vsTMS320C55x (TI))
Ghi chú thiết kế
The DSP56303AG100R2 uses a split-rail supply: 1.8 V for internal core logic and 3.3 V for I/O pads. Both rails must be brought up simultaneously (or core first then I/O) per datasheet power-sequencing requirements. Estimated: at 100 MHz with all peripherals active, the core draws about 150-180 mA from the 1.8 V rail; I/O current depends on switching frequency. Place 0.1 µF ceramic decoupling within 5 mm of each VDD pin and a 10 µF bulk capacitor per supply rail.
Route the 24-bit program/data buses (PDB0-23, GDB0-23) with matched trace lengths (±1 cm) and 50 Ω characteristic impedance to avoid timing skew on the external memory bus. Keep address and data traces on inner layers with continuous ground reference planes. Place external SRAM/SDRAM within 5 cm of the DSP to minimize bus loading. The MODA/MODB/MODC/MODD bootstrap-mode pins require 10 kΩ pull-ups to VDD_IO for normal operation.
The 144-LQFP package has no exposed thermal pad, so dissipation is limited to about 1 W continuous without airflow. Estimated: at full 100 MIPS activity the junction temperature rise is roughly 25-30 °C above ambient on a standard 4-layer JEDEC PCB, which keeps the part within commercial-grade limits. For industrial-temperature deployments, derate clock speed or provide 100 LFM airflow.
ESSI/SCI lines are 3.3 V CMOS with relatively weak drive strength (4-8 mA typical). Series-terminate long traces (>5 cm) with 33 Ω resistors to dampen reflections. The JTAG chain (TCK/TDI/TMS/TRST) must be buffered for boards with multiple scan devices; ensure TRST has a 10 kΩ pull-up and a 1 nF cap to ground for clean reset on power-up.
Do not confuse the DSP56301 (which uses a 144-LQFP but lacks the third timer) with the DSP56303. Always check the silicon revision by reading the JTAG IDCODE register at reset. Also, the MODx bootstrap pins are sampled only at RESET de-assertion; pull-ups must be stable before RESET goes high. Finally, the HI08 host port requires the host CPU to drive HR/W and HEN during accesses - leaving these floating causes bus contention on the host interface.
Thông tin tuân thủ
RoHS/REACH status not confirmed from the verified web data; lead-free per NXP legacy DSP56300 family convention. AEC-Q100 not applicable - not an automotive-qualified part.
