Silicon Labs

EFM32TG210F32-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG210F32-D-QFN32 ✓ Hoạt động
2.5 V or 3.3 V Vdss 150 microamperes/MHz Id 32-pin QFN, 6 x 6 mm Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32TG210F32-D-QFN32 Tóm tắt

The Silicon Labs EFM32TG210F32-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and 24 digital I/O pins, housed in a 32-pin QFN package measuring 6 x 6 mm. Its combination of low-power operating modes, fast wake-up capability, and integrated peripherals suits energy-sensitive embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, analog functions, and GPIO on one device. The EFM32TG series belongs to the 32-bit MCU hierarchy and uses the ARM Cortex-M3 RISC architecture. This class of device provides greater processing capacity than an 8- or 16-bit MCU while supporting low-power operation for battery-operated equipment.

The EFM32TG210F32-D-QFN32 includes 32 KB of Flash for firmware and 4 KB of SRAM for working data. Its CPU operates at up to 32 MHz, and the device provides two 16-bit timers and 24 digital I/O pins. The Tiny Gecko platform also features autonomous peripheral operation, allowing timer and communication activities to continue with limited processor intervention. Run-mode consumption is specified at 150 microamperes per megahertz, while Stop mode can reach 0.6 microamperes.

The ARM Cortex-M3 core uses a 32-bit RISC instruction set and can achieve as much as 1.25 Dhrystone MIPS per megahertz. A memory protection unit supports as many as eight memory segments, and the Wake-up Interrupt Controller handles events that occur while the processor is asleep. These features allow responsive interrupt-driven designs without keeping the CPU continuously active.

Typical applications include wearable sensors, compact industrial nodes, battery-powered remote controls, connected IoT equipment, and portable measurement instruments. The 32 MHz processing rate is suitable for protocol handling, state-machine control, data acquisition, and low-to-moderate-bandwidth communications. The 24 GPIO pins also permit direct connection of switches, indicators, sensors, and actuators.

PCB design should preserve the exposed-pad thermal and electrical requirements of the QFN package. Place decoupling capacitors close to the power pins, connect the exposed pad to the appropriate ground plane, and follow the manufacturer pin description table when assigning tracks. Confirm the selected package dimensions and exposed-pad treatment against the manufacturer datasheet before fabrication.

This product page combines the manufacturer specifications, package information, application guidance, and practical design considerations in one engineering reference. It also distinguishes pin-compatible family alternatives while identifying where package, memory, or peripheral differences require design review.

Bộ thay thế dễ dàng lắp đặt cho EFM32TG210F32-D-QFN32 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

EFM32TG211F32-QFN32

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 QFN-32 (6 x 6 mm)
Different Tiny Gecko peripheral feature set; CPU frequency, Flash, RAM, and package match at 32 MHz, 32 KB, 4 KB, and QFN-32, respectively

📋 Tham chiếu thay thế (không có trong danh mục)

EFM32TG212F32-QFN32

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 QFN-32 (6 x 6 mm)
Different Tiny Gecko peripheral feature set; CPU frequency, Flash, RAM, and package match at 32 MHz, 32 KB, 4 KB, and QFN-32, respectively

📋 Tham chiếu thay thế (không có trong danh mục)

EFM32TG210F32-D-QFN32 Tỷ lệ tối đa & tính chất điện

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB
RAM 4 KB
Digital I/O Pins 24
Timers 2 x 16-bit timers
Architecture 32-bit RISC
Dhrystone Performance Up to 1.25 MIPS/MHz
Memory Protection Up to 8 memory segments
Run-Mode Current 150 microamperes/MHz
Stop-Mode Current 0.6 microamperes
Điện áp cung cấp 2.5 V or 3.3 V
Hộp 32-pin QFN, 6 x 6 mm
Kiểu lắp đặt Surface mount
Packaging Tray

Hướng dẫn cấu hình chân EFM32TG210F32-D-QFN32 32-pin qfn, 6 x 6 mm

Cấu hình chân cho EFM32TG210F32-D-QFN32 (32-pin qfn, 6 x 6 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 32-pin qfn, 6 x 6 mm cho EFM32TG210F32-D-QFN32

Không có dữ liệu chân cụ thể sẵn có cho EFM32TG210F32-D-QFN32.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

EFM32TG210F32-D-QFN32 phù hợp cho 6 Áp dụngs: Battery-Powered IoT Sensor Nodes, Portable Medical Sensor Interfaces, Industrial Monitoring and Control, Wearable Device Controllers, Smart Home Sensor Hubs, Portable Measurement Instruments.

🧩

Battery-Powered IoT Sensor Nodes

The EFM32TG210F32-D-QFN32 fits compact wireless sensor nodes that spend most of their operating life in low-power states. Its 0.6-microampere Stop mode allows the processor to idle between measurements, while the 32 MHz Cortex-M3 core can handle sensor conditioning, packet preparation, and event processing when awake. Run-mode consumption of 150 microamperes per megahertz also supports predictable active-current planning. The 24 GPIO pins can connect sensors, indicators, and configuration switches without requiring a separate I/O expander. Firmware should use the Wake-up Interrupt Controller to wake the MCU for scheduled sampling and peripheral events, reducing unnecessary active time.

💊

Portable Medical Sensor Interfaces

The EFM32TG210F32-D-QFN32 can serve as the control MCU in a portable medical sensor interface when the design requires deterministic peripheral timing and low standby consumption. Its two 16-bit timers support periodic sampling, debouncing, or actuator timing, while 24 GPIO pins provide direct connections to sensors, status indicators, and user controls. The 32-bit Cortex-M3 core also provides enough arithmetic capacity for local filtering and protocol handling. Because this is a general-purpose MCU rather than a medical-qualified device, the complete signal chain still requires suitable isolation, protection, analog front-end design, and applicable clinical validation.

🏭

Industrial Monitoring and Control

The EFM32TG210F32-D-QFN32 is appropriate for small industrial monitoring modules that combine digital inputs, status feedback, and local computation. Its 24 GPIO pins can operate digital sensors and discrete outputs, and the two 16-bit timers are useful for pulse counting, sampling intervals, and motor or actuator timing. Operating at up to 32 MHz supports state-machine execution, logging, and communication protocol handling. The low-power characteristics also benefit remote equipment that operates intermittently. Industrial qualification requirements must be checked independently, and the PCB should include appropriate protection, transient immunity, and environmental isolation around field-wired interfaces.

📱

Wearable Device Controllers

The EFM32TG210F32-D-QFN32 suits wearable controllers where a full-size processor would be excessive but 8-bit control is insufficient. Its 32-bit Cortex-M3 core, 32 KB Flash, and 4 KB RAM are adequate for gesture-state machines, haptic control, simple user interfaces, and short Bluetooth-class protocol handling. The 6 x 6 mm QFN-32 package preserves board area in compact products, and the 0.6-microampere Stop mode supports low-energy idle behavior. Battery life still depends on radio activity, sensor duty cycle, regulator efficiency, and board leakage, so the MCU specification should be evaluated as part of the complete power budget.

🧩

Smart Home Sensor Hubs

The EFM32TG210F32-D-QFN32 can act as a local smart-home sensor hub for door contacts, occupancy inputs, temperature sensing, and actuator status. Its 24 GPIO pins allow multiple digital inputs to be connected directly, and the two 16-bit timers can manage debounce intervals, periodic polling, or indicator timing. At up to 32 MHz, the Cortex-M3 core is capable of protocol translation and local event logic while the 150-microamperes-per-megahertz Run specification supports predictable active power. A complete hub design must also include a suitable radio, sensor interfaces, firmware update strategy, and suitable enclosure and environmental protection.

🔧

Portable Measurement Instruments

The EFM32TG210F32-D-QFN32 provides a compact control platform for portable measurement instruments requiring timers, digital I/O, local data processing, and low standby demand. The 32-bit core at 32 MHz can execute instrument state logic, calibration calculations, and data-transfer routines, while the two 16-bit timers support precise sampling intervals and reference-clock functions. The QFN-32 package leaves board area available for analog circuitry, display interfaces, and isolated communication hardware. Analog measurement accuracy is not determined by the MCU alone; designers should pair it with suitable references, converters, input protection, and calibration procedures.

What is the EFM32TG210F32-D-QFN32?
The EFM32TG210F32-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller from Silicon Labs that operates up to 32 MHz. According to the manufacturer datasheet, it combines 32 KB of Flash, 4 KB of RAM, 24 digital I/O pins, and two 16-bit timers in a 32-pin QFN package. It is intended for compact, energy-sensitive embedded systems requiring low-power modes and autonomous peripheral operation.
What are the key specifications of EFM32TG210F32-D-QFN32?
The EFM32TG210F32-D-QFN32 features a 32 MHz ARM Cortex-M3 core, 32 KB of Flash memory, 4 KB of RAM, and 24 digital I/O pins. The manufacturer datasheet also specifies two 16-bit timers, 150 microamperes/MHz in Run mode, and a Stop-mode current of 0.6 microamperes. Its 6 x 6 mm QFN-32 package supports surface-mounted, space-constrained product designs.
Where can I download the EFM32TG210F32-D-QFN32 datasheet PDF?
The EFM32TG210F32-D-QFN32 datasheet PDF is available from the Silicon Labs EFM32TG documentation page and the linked EFM32TG reference manual. The datasheet contains the device pin descriptions, electrical characteristics, memory map, package dimensions, and peripheral details needed for schematic capture and PCB layout. Use the manufacturer document for the authoritative pin and exposed-pad assignments.
Where can I find the EFM32TG210F32-D-QFN32 pinout?
The EFM32TG210F32-D-QFN32 pinout is published in the pin description table and package drawing within the Silicon Labs EFM32TG datasheet. The part uses a 32-pin QFN package with an exposed pad, so the land pattern must include the manufacturer-specified thermal and electrical connection requirements. Assign individual signal names from the datasheet table rather than inferring them from another QFN-32 device.
How much power does the EFM32TG210F32-D-QFN32 use?
The EFM32TG210F32-D-QFN32 consumes 150 microamperes per megahertz in Run mode and as little as 0.6 microamperes in Stop mode, according to the manufacturer datasheet. These figures make the MCU appropriate for duty-cycled battery-powered equipment. Actual system consumption also depends on clock speed, active peripherals, GPIO states, analog activity, and the selected regulator.
Is EFM32TG210F32-D-QFN32 suitable for battery-powered IoT devices?
Yes, the EFM32TG210F32-D-QFN32 is well suited to battery-powered IoT devices because its 0.6-microampere Stop mode and 150-microamperes-per-megahertz Run mode support low-duty-cycle operation. Its Cortex-M3 core can perform protocol handling and local control while the autonomous timer and peripheral features reduce processor activity. Board-level sleep behavior and leakage from surrounding components must also be considered.
What can replace the EFM32TG210F32-D-QFN32?
The closest drop-in family alternatives are the EFM32TG211F32-QFN32 and EFM32TG212F32-QFN32, which retain the QFN-32 footprint and the target part's 32 MHz, 32 KB Flash, and 4 KB RAM core resources. Their peripheral feature sets differ, so replacement should follow a pin-by-pin and firmware compatibility review. No verified cross-brand drop-in equivalent was established.
Is EFM32TG210F32-D-QFN32 the same as EFM32TG211F32-QFN32?
The EFM32TG210F32-D-QFN32 and EFM32TG211F32-QFN32 share a QFN-32 footprint, a 32 MHz Cortex-M3 core, 32 KB of Flash, and 4 KB of RAM, but they are distinct Tiny Gecko devices. The family option changes the available peripheral feature set, so software configuration and board-level function verification are required even though the core resources and footprint align.
EFM32TG210F32-D-QFN32 vs EFM32TG211F32-QFN32: which is better for low-power sensing?
Choose EFM32TG210F32-D-QFN32 when its established two-timer and 24-GPIO configuration satisfies the sensing design without additional device-family features. Choose EFM32TG211F32-QQN32 only if its additional family resources improve the design and the firmware has been validated for that device. Both match at 32 MHz, 32 KB Flash, 4 KB RAM, and QFN-32 packaging, so the decision is primarily functional.
When should I choose EFM32TG210F32-D-QFN32 over EFM32TG212F32-QFN32?
Choose the EFM32TG210F32-D-QFN32 when the required control functions fit its 24 GPIO pins, two 16-bit timers, and established peripheral configuration. Select EFM32TG212F32-QFN32 when a later Tiny Gecko family option provides a specific peripheral needed by the product. Since both use 32 KB Flash and 4 KB RAM at up to 32 MHz, peripheral requirements and validated firmware support should guide the selection.
What is the best cross-brand equivalent for EFM32TG210F32-D-QFN32?
No verified cross-brand drop-in equivalent is established for the EFM32TG210F32-D-QFN32. MCU substitution cannot be based only on processor speed, memory size, and package dimensions because pin multiplexing, peripheral mapping, startup behavior, and software configuration must also match. Use the verified EFM32TG211F32-QFN32 or EFM32TG212F32-QFN32 family alternatives for a same-footprint review, or redesign the PCB for a cross-brand MCU.
How do I compare the EFM32TG210F32-D-QFN32 with a drop-in alternative?
Compare the EFM32TG210F32-D-QFN32 with an alternative by checking the QFN-32 land pattern, exposed pad, 2.5 V or 3.3 V supply requirements, 32 MHz clocking, 32 KB Flash, 4 KB RAM, GPIO mapping, timers, serial interfaces, and low-power modes. The EFM32TG211F32-QFN32 and EFM32TG212F32-QFN32 match the principal core resources, but each family variant still requires peripheral and firmware validation.
Where to buy EFM32TG210F32-D-QFN32 online?
Use the Request a Quote form on this XAIPART page to request EFM32TG210F32-D-QFN32 availability, volume pricing, and lead time. Include your required quantity, target delivery date, and acceptable reel, tray, or cut-tape packaging preference. The manufacturer part number identifies a 32-pin QFN device, so confirm the package orientation and exposed-pad details before ordering.
What is the price of EFM32TG210F32-D-QFN32?
The current EFM32TG210F32-D-QFN32 price is generated through the Request a Quote form on this page. Submit the required quantity, target shipment location, and packaging requirement to obtain a current quotation. This request is important because component pricing and availability can vary with order quantity, production schedule, and package-delivery format.
What is the lead time and stock status for EFM32TG210F32-D-QFN32?
Request the current EFM32TG210F32-D-QFN32 lead time and stock status through the Request a Quote form on this page. State the required quantity, delivery date, and whether the assembly process accepts tray, tape-and-reel, or cut-tape packaging. A production commitment should also account for programming, firmware validation, and PCB assembly lead times beyond component delivery.

Dữ liệu tham khảo kỹ thuật cho EFM32TG210F32-D-QFN32 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EFM32TG210F32-D-QFN32 when a design needs a 32 MHz Cortex-M3 MCU with 32 KB Flash, 4 KB RAM, 24 GPIO pins, two 16-bit timers, and low-power modes in a 6 x 6 mm QFN-32 package. It is particularly suitable for battery-powered sensing and compact control products where the established EFM32TG210 peripheral configuration is preferred. Consider the EFM32TG211F32-QFN32 or EFM32TG212F32-QFN32 when the same package, clock rate, and memory resources are needed but a different Tiny Gecko peripheral configuration provides a functional benefit. Treat both as design-review replacements rather than automatic substitutions: compare pin multiplexing, peripheral availability, interrupt mapping, clock setup, firmware dependencies, and exposed-pad requirements. No verified cross-brand drop-in equivalent is available, so changing to another MCU manufacturer generally requires a PCB redesign.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EFM32TG211F32-QFN32 EFM32TG212F32-QFN32
Brand Silicon Labs Silicon Labs Silicon Labs
Package QFN-32 (6 x 6 mm) QFN-32 (6 x 6 mm) - same package QFN-32 (6 x 6 mm) - same package
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB
RAM 4 KB 4 KB 4 KB

Bảo phân biệt quan trọng

  • Established low-power operating characteristics (vsEFM32TG211F32-QFN32)
  • 32-bit processing with dedicated timer resources (vsEFM32TG212F32-QFN32)
  • Pin-compatible family reuse without reducing core resources (vsEFM32TG211F32-QFN32)

Ghi chú thiết kế

Place input, output, and local bypass capacitors close to their associated power pins and return them to the ground plane without long loops. The QFN-32 device also uses an exposed pad, so the land pattern should preserve the manufacturer-specified pad geometry and connect the pad to the appropriate ground plane. Review pin assignments against the manufacturer pin-description table before routing because several alternate-function signals share the same GPIO pins.

The 2.5 V or 3.3 V supply requirement must remain within the electrical limits for the selected device, and the regulator should accommodate the Cortex-M3 core plus active peripherals. Use the 150-microamperes-per-megahertz Run-mode figure as a core-current planning input, then add GPIO, analog, and peripheral loads. In Stop mode, verify that external pull resistors, sensors, and communication circuits do not dominate the 0.6-microampere MCU current.

Keep high-frequency clock and debug routes short, return them to a continuous ground reference, and avoid routing them beside noisy switching nodes or unprotected field inputs. The exposed-pad connection supports thermal and electrical performance, but it does not replace correct decoupling. Use a common ground strategy suitable for the complete analog, digital, and power domains rather than splitting the ground plane without a deliberate return-current plan.

Do not treat QFN-32 package compatibility as proof of software or electrical equivalence. Confirm the alternate-function mapping, peripheral inventory, startup sequence, clock requirements, and exposed-pad connection for every proposed replacement. When moving from EFM32TG210F32-D-QFN32 to EFM32TG211F32-QFN32 or EFM32TG212F32-QFN32, recompile against the selected device headers and run peripheral, interrupt, low-power, and brownout testing.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance and qualification attributes are not stated in the accessible product information. Verify current material and automotive qualification status with the manufacturer before production release.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

efm32tg210f32 qfn32 EFM32TG210F32-D-QFN32 datasheet EFM32TG210F32-D-QFN32 datasheet pdf EFM32TG210F32-D-QFN32 pinout EFM32TG210F32-D-QFN32 specifications EFM32TG210F32-D-QFN32 equivalent EFM32TG210F32-D-QFN32 replacement EFM32TG210F32-D-QFN32 price EFM32TG210F32-D-QFN32 stock Silicon Labs EFM32TG210F32-D-QFN32 EFM32TG210F32-D-QFN32 QFN32 footprint EFM32TG210F32-D-QFN32 vs EFM32TG211F32-QFN32

Các bộ phận và thuật ngữ liên quan

Silicon Labs EFM32TG210F32-D-QFN32 EFM32TG211F32-QFN32 EFM32TG212F32-QFN32 EFM32TG210 Tiny Gecko ARM Cortex-M3 32-bit RISC microcontroller MCU embedded processor semiconductor QFN-32 QFN family surface mount SMD Flash memory RAM GPIO 16-bit timer Stop mode Run mode Wake-up Interrupt Controller Memory Protection Unit IoT sensor node battery-powered embedded system
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ