EP1S40F780C8N - Stratix FPGA 41,250 LEs 780-BGA | Intel / Altera
MPN: EP1S40F780C8N ✗ Cuối đờiEP1S40F780C8N Tóm tắt
An FPGA (Field Programmable Gate Array) is a programmable logic device that combines the integration density of an ASIC with the flexibility of post-fabrication reprogrammability. FPGAs sit at the top of the programmable logic hierarchy: CPLD -> FPGA -> SoC FPGA. Stratix devices specifically target high-performance applications such as DSP, telecommunications, and ASIC prototyping, and are positioned above the lower-cost Cyclone family and below the high-end Stratix GX and later Stratix II/V families.
Key features of the EP1S40 include TriMatrix embedded memory blocks (MRAM, M512, M4K) totaling approximately 3.4 Mbits, dedicated 18-bit x 18-bit multipliers for DSP, high-speed LVDS I/O up to 840 Mbps, up to 12 clock management PLL blocks, and support for external memory interfaces including DDR, DDR-II, QDR, and SDRAM. The C8 speed grade balances logic speed and power consumption for cost-sensitive designs versus the faster C7 and C6 grades.
Architecturally, the Stratix family uses a sea-of-LABs (Logic Array Blocks) fabric with hierarchical routing, dedicated DSP blocks for multiply-accumulate operations, and embedded memory tiles placed in columns for efficient DSP pipelines. The C8 designation indicates a specific speed-power corner; designs targeting higher clock rates should consider C7 or C6 grades of the same device.
Typical applications include ASIC prototyping and emulation, telecom baseband processing, high-speed data acquisition, video and image processing pipelines, and DSP coprocessing. The wide I/O count and embedded multipliers make it well suited for parallel datapath designs where many multiplications per clock cycle are required.
Designers should note that the 780-ball BGA requires multi-layer PCB fabrication with controlled-impedance routing, and that configuration via the EPC device family (EPC16, EPC8) is typical. Programming files (.sof, .pof) are generated using the Quartus II design software. The C8 speed grade is selected when the design's timing closure can tolerate the slightly slower logic paths in exchange for lower dynamic power.
This page synthesizes distributor pricing, drop-in same-package alternatives from the Stratix family, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho EP1S40F780C8N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1S40F780C8N (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Series, Speed Grade, RoHS Status.
EP1S40F780C7N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1S40F780C8
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1S40F780C6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1S40F780C5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1S40F780C7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1S30F780C8N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP2S40F780C5N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EP1S40F780C8N Tỷ lệ tối đa & tính chất điện
| Family | Stratix |
| Series | EP1S |
| Logic Elements | 41,250 |
| Embedded Memory | 3,423,744 bits |
| Embedded Multipliers | 615 (18-bit x 18-bit) |
| Hộp | 780-ball FCBGA (FineLine BGA), 29 mm x 29 mm, 1 mm pitch |
| Logic Family | CMOS |
| Supply Voltage (Core) | 1.5 V |
| Speed Grade | C8 (commercial) |
| Nhiệt độ hoạt động | 0 °C to +85 °C |
| I/O Standard Support | LVDS, LVTTL, LVCMOS, SSTL, HSTL, PCI, PCI-X |
| Maximum LVDS Data Rate | 840 Mbps |
| PLL Blocks | Up to 12 |
| Kiểu bộ nhớ | TriMatrix (MRAM, M512, M4K blocks) |
| External Memory Interface | DDR, DDR-II, QDR, SDRAM |
| Configuration Method | Passive serial, Fast passive parallel, JTAG |
| Design Software | Quartus II |
| Trạng thái RoHS | Compliant |
| Kiểu lắp đặt | Surface Mount (BGA) |
Cấu hình chân EP1S40F780C8N
| Chân A1 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A2 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A3 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A4 | VCCIO — I/O supply voltage (bank-specific, refer to datasheet) |
| Chân A5 | GND — Ground |
| Chân A6 | VCCINT — Core 1.5 V supply |
| Chân A7 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A8 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A9 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân A10 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân B1 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân B2 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân B3 | GND — Ground |
| Chân B4 | VCCINT — Core 1.5 V supply |
| Chân B5 | VCCIO — I/O supply voltage (bank-specific) |
| Chân B6 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân B7 | GND — Ground |
| Chân B8 | IO — General purpose I/O bank (refer to datasheet bank table) |
| Chân B9 | VCCINT — Core 1.5 V supply |
| Chân B10 | IO — General purpose I/O bank (refer to datasheet bank table) |
Ứng dụng tiêu biểu
EP1S40F780C8N phù hợp cho 7 Áp dụngs: ASIC Prototyping and Emulation, Telecom Baseband Processing, High-Speed Data Acquisition Systems, Video and Image Processing Pipelines, DSP Coprocessor for Embedded Systems, Industrial Control and Motor Drive, Radar and Signal Intelligence.
ASIC Prototyping and Emulation
The EP1S40F780C8N's 41,250 logic elements and 615 embedded multipliers make it well suited to ASIC prototyping where multiple million-gate designs must be emulated on FPGA fabric before tape-out. The TriMatrix memory totaling 3,423,744 bits provides on-chip storage for emulating register files and FIFOs, while 12 PLLs handle multi-clock ASIC domains. Designers typically partition the ASIC across multiple Stratix devices using known-good FPGA prototyping flows.
Được đề xuất
Telecom Baseband Processing
Telecom baseband designs require high DSP throughput and parallel datapaths. The EP1S40F780C8N delivers 615 18x18-bit multipliers, enabling multi-channel QAM, OFDM, or turbo-decoder implementations. The C8 speed grade supports clock rates sufficient for 3G/early-4G baseband sample rates, while LVDS I/O up to 840 Mbps interfaces cleanly with high-speed ADCs and DACs in radio cards.
Được đề xuất
High-Speed Data Acquisition Systems
High-speed DAQ systems rely on FPGAs to capture multi-GSps ADC streams and perform real-time channelization. The EP1S40F780C8N's LVDS I/O at 840 Mbps pairs naturally with interleaved ADC front ends, while 3.4 Mbits of embedded memory buffers ADC samples between trigger events. The C8 grade provides sufficient timing margin for 200-300 MHz internal datapaths typical in digital oscilloscopes and radar receivers.
Được đề xuất
Video and Image Processing Pipelines
Real-time HD video processing (e.g., 1080p60) requires hundreds of DSP operations per pixel and frame buffers large enough to hold multiple full frames. The EP1S40F780C8N's 615 multipliers and 3.4 Mbits of memory support full HD video pipelines including deinterlacing, scaling, and color-space conversion. The 780-ball BGA exposes enough LVDS pairs to drive dual-channel DVI/HDMI output directly.
Được đề xuất
DSP Coprocessor for Embedded Systems
Used as a DSP coprocessor alongside a host CPU, the EP1S40F780C8N offloads compute-intensive kernels (FFT, FIR, correlation) for medical imaging, software-defined radio, or scientific instruments. The 615 multipliers provide 30+ GMACs of 18-bit throughput, and 12 PLLs handle multiple sample-rate domains. The PCI/PCI-X I/O support enables direct interface to PowerPC or x86 host processors in legacy embedded platforms.
Được đề xuất
Industrial Control and Motor Drive
Industrial servo drives and motion controllers demand deterministic multi-axis control loops running at tens of kHz. The EP1S40F780C8N implements encoder interfaces, PID controllers, and fieldbus protocols (EtherCAT, Profibus) in hardware, while the 615 multipliers accelerate FOC (field-oriented control) math. The C8 commercial temperature grade (0 °C to +85 °C) suits factory-floor enclosures; industrial-grade I8 variants serve wider ranges.
Được đề xuất
Radar and Signal Intelligence
Phased-array radar and SIGINT systems require massive parallel DSP for beamforming and pulse compression. The EP1S40F780C8N's high multiplier count and 3.4 Mbit memory support hundreds of channels of matched-filter processing, while LVDS I/O streams digitized antenna signals into the fabric at 840 Mbps. The C8 grade provides timing margin for 200+ MHz beamformer clocks typical in S-band radar front ends.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1S40F780C8N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1S40F780C7N | EP1S40F780C8 | EP1S30F780C8N | EP2S40F780C5N |
|---|---|---|---|---|---|
| Package | 780-ball FCBGA (29x29 mm) | 780-ball FCBGA - same | 780-ball FCBGA - same | 780-ball FCBGA - same | 780-ball FCBGA - same |
| Brand | Intel (formerly Altera) | Intel - same | Intel - same | Intel - same | Intel - same |
| Logic Elements | 41,250 | 41,250 | 41,250 | 33,880 (-18%) | 40,940 (Stratix II) |
| Embedded Memory (bits) | 3,423,744 | 3,423,744 | 3,423,744 | 2,233,344 (-35%) | 3,375,168 (Stratix II) |
| Embedded Multipliers | 615 | 615 | 615 | 384 (-38%) | 384 (Stratix II architecture) |
| Speed Grade | C8 | C7 (faster) | C8 (same) | C8 (same) | C5 (faster) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Active (legacy) |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.2 V |
Bảo phân biệt quan trọng
- Slowest speed grade of the EP1S40 family offers lowest cost and lowest power (vsEP1S40F780C7N)
- Highest logic density in the original Stratix family (vsEP1S30F780C8N)
- Original Stratix architecture with mature Quartus II tool support (vsEP2S40F780C5N (Stratix II))
Ghi chú thiết kế
The EP1S40F780C8N at full utilization can dissipate 5-10 W depending on clock rate and toggle activity. Estimated: at 50% toggle activity and 250 MHz core clock, expect ~7 W. The 780-ball FCBGA exposes a thermal pad array that requires a PCB thermal pad with at least 4 thermal vias for heat transfer to inner copper planes. Designers should follow the Stratix Board Design Guidelines for thermal pad land pattern.
The 780-ball FCBGA at 1 mm pitch requires a multi-layer PCB with 6-8 layers, microvia or laser-drilled stacked vias for breakout, and controlled-impedance routing for LVDS pairs. Signal integrity analysis using HyperLynx or similar tools is recommended for LVDS at 840 Mbps. Decoupling: place 0.1 uF X7R ceramic capacitors within 100 mil of every VCCIO/VCCINT pin pair, with bulk 100 uF tantalum or polymer caps near the FPGA.
Do not assume Stratix and Stratix II pinouts are identical even in the same 780-ball package: bank assignments, power pin counts, and configuration pin locations differ between EP1S and EP2S families. Always re-run pin assignment and verify against the target device's pinout file before committing to a board respin. Also note that the C8 speed grade may fail timing closure in designs that just meet timing on C6 silicon; budget additional slack or move to C7/C6.
Thông tin tuân thủ
RoHS compliant per Altera/Intel product page. Not AEC-Q100 qualified - this is a commercial-grade FPGA. For industrial temperature range, choose the EP1S40F780I8N variant.
