EPF10K30AQC240-1 - 30K FLEX-10KA FPGA, 240-PQFP | Intel/Altera EPF10K30AQC240-1 bởi Intel - thành phần điện tử
Intel

EPF10K30AQC240-1 - 30K FLEX-10KA FPGA, 240-PQFP | Intel/Altera

MPN: EPF10K30AQC240-1 ✗ Cuối đời
3.3 V (3.0 V to 3.6 V) Vdss 240-pin BFQFP (PQFP, gull-wing) Package 80 MHz Speed
Yêu cầu báo giá
MOQ: 1 |
Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

EPF10K30AQC240-1 Tóm tắt

The Intel (formerly Altera) EPF10K30AQC240-1 is a FLEX-10KA family Field Programmable Gate Array (FPGA) integrating 30,000 typical gates, 1,728 logic elements, and 12,288 bits of embedded SRAM in a 240-pin Plastic Quad Flat Pack (PQFP / BFQFP) package. Built on a 0.42 µm CMOS process, the device offers 189 user I/O pins, a 0.6 ns propagation delay, and supports commercial-grade operation from 0 °C to 70 °C with a 3.3 V core supply.

What is an FPGA? A Field Programmable Gate Array is a semiconductor integrated circuit composed of an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells that can be electrically reconfigured to implement custom digital logic. FPGAs occupy a tier between fixed-function ASICs (high NRE cost, no flexibility) and discrete logic/gate arrays (limited density). The FLEX-10KA family specifically introduced an embedded array block (EAB) that combines look-up-table-based logic with dedicated SRAM blocks, enabling System-on-a-Programmable-Chip (SOPC) integration - the industry's first such hybrid architecture. FPGAs belong to the broader programmable logic device family, alongside CPLDs (Complex Programmable Logic Devices) and SPLDs (Simple PLDs).

Key features include 216 logic array blocks (LABs) organized across the fabric, dedicated carry chains for arithmetic, and a JTAG-compliant IEEE 1149.1 boundary-scan interface. The architecture supports 5-V tolerant I/O on selected variants and offers true dual-port RAM blocks (EABs) configurable from 256 × 8 to 2,048 × 1. Fast-Track interconnect provides predictable, deterministic routing with a fixed delay across the device, simplifying timing closure in legacy Quartus II design flows.

Typical applications span telecommunications line cards, industrial control and motor drive front-ends, legacy networking equipment, and embedded instrumentation where mid-range logic density and SRAM integration are required without the overhead of a soft-core processor. The device is fully supported by Altera Quartus II (legacy releases) and MAX+PLUS II toolchains, which remain in use across long-lifecycle industrial and defense programs.

Designers should evaluate the device's 0.6 ns pin-to-pin logic delay against system timing budgets, and confirm 3.3 V core / 5 V tolerant I/O compatibility with surrounding logic. Because the FLEX-10KA family is no longer recommended for new designs, an end-of-life migration plan to Cyclone IV/V or MAX 10 is advisable for ongoing programs. This page consolidates distributor pricing, parametric comparisons, and legacy support notes not found in the original datasheet alone.

Bộ thay thế dễ dàng lắp đặt cho EPF10K30AQC240-1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF10K30AQC240-1 (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, Internal Frequency (max), RoHS Status, Family.

Altera
Internal Frequency (max): 80 MHz
RoHS Status: ROHS3 Compliant
So sánh với EPF10K30AQC240-1 →
Altera
Package: 208-pin PQFP (BFQFP)
Process Technology: 0.3 µm CMOS
So sánh với EPF10K30AQC240-1 →
Intel
Package: 240-pin PQFP (BFQFP), gull-wing leads
Process Technology: 0.3 µm CMOS
Internal Frequency (max): 166.67 MHz
So sánh với EPF10K30AQC240-1 →
Intel
Process Technology: 0.3 µm CMOS
Internal Frequency (max): 142.86 MHz
Family: FLEX 10K
So sánh với EPF10K30AQC240-1 →
Altera
Package: 240-pin PQFP (FQFP-240, BFQFP-240)
Process Technology: 0.3 µm CMOS
RoHS Status: unknown
So sánh với EPF10K30AQC240-1 →
Altera
Package: 240-pin PQFP (Plastic Quad Flat Pack)
Process Technology: 0.42 um CMOS SRAM
Family: FLEX 10KA
So sánh với EPF10K30AQC240-1 →
Intel
Package: 240-pin RQFP (Power QFP) with exposed pad
Process Technology: 0.42 µm CMOS SRAM
Internal Frequency (max): 125 MHz
So sánh với EPF10K30AQC240-1 →

EPF10K30AQC240-2

✅ Drop-In
📦 240-pin BFQFP (PQFP)
Same FLEX-10KA device in identical 240-PQFP package; -2 speed grade improves timing margins vs -1

📋 Tham chiếu thay thế (không có trong danh mục)

EPF10K30AQC240-3

✅ Drop-In ⚠️ Thông số chưa được xác minh
Altera
📦 240-pin BFQFP (PQFP)
FLEX-10KA · 1,728 · 30,000 (typical) · 12,288 bits · 216 · 189 · 125 MHz · 0.3 µm CMOS

Liên hệ để biết giá

Xem tài liệu →

EPF10K30AQC240-2N

✅ Drop-In ⚠️ Thông số chưa được xác minh
Intel
📦 240-pin BFQFP (PQFP)
FLEX-10KA · FLEX 10K · 1728 · 30000 gates · 216 · 12288 bits · 189 · 4

Liên hệ để biết giá

Xem tài liệu →

EPF10K30AQC208-3

✅ Drop-In
Altera
📦 208-pin PQFP
FLEX-10KA · 1,728 · 30,000 · 12,288 · 216 · 147 · 125 MHz · 0.3 µm CMOS

Liên hệ để biết giá

Xem tài liệu →

EPF10K30AQC208-1N

✅ Drop-In
Altera
📦 208-pin PQFP
FLEX 10KA · FLEX-10KA · 1728 · 12288 · 216 · 6 · 147 · 30000

Liên hệ để biết giá

Xem tài liệu →

EPF10K30AQC240-1 Tỷ lệ tối đa & tính chất điện

Family FLEX-10KA
Logic Elements 1,728
Typical Gates 30,000
Embedded SRAM Bits 12,288
Logic Array Blocks (LABs) 216
User I/O Pins 189
Propagation Delay (tpd) 0.6 ns
Internal Frequency 80 MHz
Supply Voltage - Core 3.3 V (3.0 V to 3.6 V)
Process Technology 0.42 µm CMOS
Nhiệt độ hoạt động 0 °C to +70 °C (Commercial)
Hộp 240-pin BFQFP (PQFP, gull-wing)
Package Code FQFP
Kiểu lắp đặt Surface Mount
Trạng thái RoHS non_compliant (legacy, lead-bearing PQFP variant typical)

Cấu hình chân EPF10K30AQC240-1

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Chân 1 I/O — User I/O (bank-dependent)
Chân 2 I/O — User I/O
Chân 3 I/O — User I/O
Chân 4 I/O — User I/O
Chân 5 VCCIO — I/O supply voltage
Chân 6 I/O — User I/O
Chân 7 I/O — User I/O
Chân 8 I/O — User I/O
Chân 9 I/O — User I/O
Chân 10 GND — Ground
Chân 11 I/O — User I/O
Chân 12 I/O — User I/O
Chân 13 I/O — User I/O
Chân 14 I/O — User I/O
Chân 15 I/O — User I/O
Chân 16 VCC — Core supply (3.3 V)
Chân 17 I/O — User I/O
Chân 18 I/O — User I/O
Chân 19 I/O — User I/O
Chân 20 GND — Ground
Chân 21 nCONFIG — Configuration control (active-low)
Chân 22 nSTATUS — Configuration status (active-low)
Chân 23 CONF_DONE — Configuration done (open-drain)
Chân 24 DCLK — Configuration clock input
Chân 25 DATA0 — Configuration data input
Chân 26 DATA1 — Configuration data input (PS mode)
Chân 27 DATA2 — Configuration data input (PS mode)
Chân 28 DATA3 — Configuration data input (PS mode)
Chân 29 DATA4 — Configuration data input (PS mode)
Chân 30 DATA5 — Configuration data input (PS mode)
Chân 31 DATA6 — Configuration data input (PS mode)
Chân 32 DATA7 — Configuration data input (PS mode)
Chân 33 TDI — JTAG Test Data In
Chân 34 TMS — JTAG Test Mode Select
Chân 35 TCK — JTAG Test Clock
Chân 36 TDO — JTAG Test Data Out
Chân 37 CLK0 — Dedicated clock input 0
Chân 38 CLK1 — Dedicated clock input 1
Chân 39 CLK2 — Dedicated clock input 2
Chân 40 VCC — Core supply (3.3 V)
Chân 41 I/O — User I/O
Chân 42 I/O — User I/O
Chân 43 I/O — User I/O
Chân 44 I/O — User I/O
Chân 45 I/O — User I/O
Chân 46 GND — Ground
Chân 47 I/O — User I/O
Chân 48 I/O — User I/O
Chân 49 I/O — User I/O
Chân 50 I/O — User I/O
Chân 51 I/O — User I/O
Chân 52 VCCIO — I/O supply voltage
Chân 53 I/O — User I/O
Chân 54 I/O — User I/O
Chân 55 I/O — User I/O
Chân 56 I/O — User I/O
Chân 57 I/O — User I/O
Chân 58 GND — Ground
Chân 59 I/O — User I/O
Chân 60 I/O — User I/O
Chân 61 I/O — User I/O
Chân 62 I/O — User I/O
Chân 63 I/O — User I/O
Chân 64 VCC — Core supply (3.3 V)
Chân 65 I/O — User I/O
Chân 66 I/O — User I/O
Chân 67 I/O — User I/O
Chân 68 I/O — User I/O
Chân 69 I/O — User I/O
Chân 70 GND — Ground
Chân 71 I/O — User I/O
Chân 72 I/O — User I/O
Chân 73 I/O — User I/O
Chân 74 I/O — User I/O
Chân 75 I/O — User I/O
Chân 76 VCCIO — I/O supply voltage
Chân 77 I/O — User I/O
Chân 78 I/O — User I/O
Chân 79 I/O — User I/O
Chân 80 I/O — User I/O
Chân 81 I/O — User I/O
Chân 82 GND — Ground
Chân 83 I/O — User I/O
Chân 84 I/O — User I/O
Chân 85 I/O — User I/O
Chân 86 I/O — User I/O
Chân 87 I/O — User I/O
Chân 88 VCC — Core supply (3.3 V)
Chân 89 I/O — User I/O
Chân 90 I/O — User I/O
Chân 91 I/O — User I/O
Chân 92 I/O — User I/O
Chân 93 I/O — User I/O
Chân 94 GND — Ground
Chân 95 I/O — User I/O
Chân 96 I/O — User I/O
Chân 97 I/O — User I/O
Chân 98 I/O — User I/O
Chân 99 I/O — User I/O
Chân 100 VCCIO — I/O supply voltage
Chân 101 I/O — User I/O
Chân 102 I/O — User I/O
Chân 103 I/O — User I/O
Chân 104 I/O — User I/O
Chân 105 I/O — User I/O
Chân 106 GND — Ground
Chân 107 I/O — User I/O
Chân 108 I/O — User I/O
Chân 109 I/O — User I/O
Chân 110 I/O — User I/O
Chân 111 I/O — User I/O
Chân 112 VCC — Core supply (3.3 V)
Chân 113 I/O — User I/O
Chân 114 I/O — User I/O
Chân 115 I/O — User I/O
Chân 116 I/O — User I/O
Chân 117 I/O — User I/O
Chân 118 GND — Ground
Chân 119 I/O — User I/O
Chân 120 I/O — User I/O
Chân 121 I/O — User I/O
Chân 122 I/O — User I/O
Chân 123 I/O — User I/O
Chân 124 VCCIO — I/O supply voltage
Chân 125 I/O — User I/O
Chân 126 I/O — User I/O
Chân 127 I/O — User I/O
Chân 128 I/O — User I/O
Chân 129 I/O — User I/O
Chân 130 GND — Ground
Chân 131 I/O — User I/O
Chân 132 I/O — User I/O
Chân 133 I/O — User I/O
Chân 134 I/O — User I/O
Chân 135 I/O — User I/O
Chân 136 VCC — Core supply (3.3 V)
Chân 137 I/O — User I/O
Chân 138 I/O — User I/O
Chân 139 I/O — User I/O
Chân 140 I/O — User I/O
Chân 141 I/O — User I/O
Chân 142 GND — Ground
Chân 143 I/O — User I/O
Chân 144 I/O — User I/O
Chân 145 I/O — User I/O
Chân 146 I/O — User I/O
Chân 147 I/O — User I/O
Chân 148 VCCIO — I/O supply voltage
Chân 149 I/O — User I/O
Chân 150 I/O — User I/O
Chân 151 I/O — User I/O
Chân 152 I/O — User I/O
Chân 153 I/O — User I/O
Chân 154 GND — Ground
Chân 155 I/O — User I/O
Chân 156 I/O — User I/O
Chân 157 I/O — User I/O
Chân 158 I/O — User I/O
Chân 159 I/O — User I/O
Chân 160 VCC — Core supply (3.3 V)
Chân 161 I/O — User I/O
Chân 162 I/O — User I/O
Chân 163 I/O — User I/O
Chân 164 I/O — User I/O
Chân 165 I/O — User I/O
Chân 166 GND — Ground
Chân 167 I/O — User I/O
Chân 168 I/O — User I/O
Chân 169 I/O — User I/O
Chân 170 I/O — User I/O
Chân 171 I/O — User I/O
Chân 172 VCCIO — I/O supply voltage
Chân 173 I/O — User I/O
Chân 174 I/O — User I/O
Chân 175 I/O — User I/O
Chân 176 I/O — User I/O
Chân 177 I/O — User I/O
Chân 178 GND — Ground
Chân 179 I/O — User I/O
Chân 180 I/O — User I/O
Chân 181 I/O — User I/O
Chân 182 I/O — User I/O
Chân 183 I/O — User I/O
Chân 184 VCC — Core supply (3.3 V)
Chân 185 I/O — User I/O
Chân 186 I/O — User I/O
Chân 187 I/O — User I/O
Chân 188 I/O — User I/O
Chân 189 I/O — User I/O
Chân 190 GND — Ground
Chân 191 I/O — User I/O
Chân 192 I/O — User I/O
Chân 193 I/O — User I/O
Chân 194 I/O — User I/O
Chân 195 I/O — User I/O
Chân 196 VCCIO — I/O supply voltage
Chân 197 I/O — User I/O
Chân 198 I/O — User I/O
Chân 199 I/O — User I/O
Chân 200 I/O — User I/O
Chân 201 I/O — User I/O
Chân 202 GND — Ground
Chân 203 I/O — User I/O
Chân 204 I/O — User I/O
Chân 205 I/O — User I/O
Chân 206 I/O — User I/O
Chân 207 I/O — User I/O
Chân 208 VCC — Core supply (3.3 V)
Chân 209 I/O — User I/O
Chân 210 I/O — User I/O
Chân 211 I/O — User I/O
Chân 212 I/O — User I/O
Chân 213 I/O — User I/O
Chân 214 GND — Ground
Chân 215 I/O — User I/O
Chân 216 I/O — User I/O
Chân 217 I/O — User I/O
Chân 218 I/O — User I/O
Chân 219 I/O — User I/O
Chân 220 VCCIO — I/O supply voltage
Chân 221 I/O — User I/O
Chân 222 I/O — User I/O
Chân 223 I/O — User I/O
Chân 224 I/O — User I/O
Chân 225 I/O — User I/O
Chân 226 GND — Ground
Chân 227 I/O — User I/O
Chân 228 I/O — User I/O
Chân 229 I/O — User I/O
Chân 230 I/O — User I/O
Chân 231 I/O — User I/O
Chân 232 VCC — Core supply (3.3 V)
Chân 233 I/O — User I/O
Chân 234 I/O — User I/O
Chân 235 I/O — User I/O
Chân 236 I/O — User I/O
Chân 237 I/O — User I/O
Chân 238 GND — Ground
Chân 239 I/O — User I/O
Chân 240 I/O — User I/O

Ứng dụng tiêu biểu

EPF10K30AQC240-1 phù hợp cho 6 Áp dụngs: Telecommunications Line Cards, Industrial Control and Motor Drive, Legacy Networking Equipment, Embedded Instrumentation and Test Equipment, Military and Aerospace Legacy Systems, Medical Imaging Front-Ends.

🌐

Telecommunications Line Cards

The EPF10K30AQC240-1 fits legacy telecommunications line-card designs where its 30,000 gates and 12,288 bits of embedded SRAM provide glue logic, framing, and small buffer FIFOs without the overhead of a soft processor. The 0.6 ns propagation delay and 80 MHz internal frequency suit T1/E1 and early-SDH data rates, while the 189 user I/O pins accommodate parallel bus interfaces to network processors. Designers benefit from the FLEX-10KA's dual-port EAB blocks for small elastic stores. As of 2026-09-11, telecom OEMs rely on this part for sustaining legacy equipment rather than new builds.

Được đề xuất

EPF10K30AQC240-2 (Higher speed-grade drop-in for timing-constrained line cards) EPF10K130EQC240-1 · Altera EP1K30TI144-2 · Intel
🏭

Industrial Control and Motor Drive

The EPF10K30AQC240-1 fits industrial motor-drive and PLC front-end designs where its 189 I/O pins accept numerous encoder, limit-switch, and PWM signals directly. The 0.6 ns propagation delay supports deterministic feedback-loop latency, critical for vector-control algorithms. The 240-pin PQFP industrial footprint eases hand-rework in long-lifecycle factory equipment. The device's commercial 0-70 °C rating suits cabinet-mounted controls; an industrial-temperature grade (-1N suffix variant) may be required for harsher environments.

Được đề xuất

EPF10K50EQC240-1 · Intel EPF10K30AQC240-2 (Same device with faster timing for closed-loop control)
🌐

Legacy Networking Equipment

The EPF10K30AQC240-1 fits router, switch, and bridge designs from the late 1990s and early 2000s where its EAB-based SRAM provides packet buffering and CAM emulation. The 30K-gate density is sufficient for bus-arbritration, address decoding, and protocol conversion logic between PHY and network processor. Modern replacements such as Cyclone IV offer higher density at lower cost but require PCB rework and firmware porting; the EPF10K30AQC240-1 remains in service for sustaining legacy networking hardware.

Được đề xuất

EPF10K30AQC240-3 · Altera EPF10K100EFC484-1 · Intel
🔧

Embedded Instrumentation and Test Equipment

The EPF10K30AQC240-1 fits embedded oscilloscopes, logic analyzers, and protocol testers where its dual-port EAB blocks serve as deep capture buffers and trigger sequencers. The 0.6 ns tpd enables real-time pattern matching on parallel buses up to ~80 MHz, suitable for legacy PCI, ISA, and VME instrumentation. The 240-pin PQFP allows sufficient user I/O for multi-channel front ends, while the FLEX-10KA architecture supports fast in-system reconfiguration via JTAG for field upgrades.

Được đề xuất

EPF10K30AQC240-2 (Same package, -2 grade improves capture timing margins) EPF10K10AQC208-3 · Altera
✈️

Military and Aerospace Legacy Systems

The EPF10K30AQC240-1 fits sustainment programs for legacy defense electronics where re-engineering is cost-prohibitive. The PQFP package, while not the most rugged, has been used in many line-replaceable units (LRUs) deployed across avionics and shipboard systems. Designers must source from authorized distributors, verify date code and lot traceability, and screen against the original MIL-STD or equivalent program requirements. As of 2026-09-11, this part is a common sustainment buy rather than a new design choice.

Được đề xuất

EPF10K30AQC240-2 (Drop-in upgrade for timing-constrained avionics modules) EPF10K50EQC240-2 · Intel
💊

Medical Imaging Front-Ends

The EPF10K30AQC240-1 fits ultrasound, endoscopy, and patient-monitoring front-end designs where its 12,288-bit embedded SRAM serves as line buffers for image acquisition. The 0.6 ns propagation delay supports real-time beamforming at modest channel counts, and the 189 user I/O pins accept parallel ADC outputs. Long-lifecycle medical equipment (10-15+ year support windows) often specifies this FLEX-10KA part because it has been qualified under legacy IEC 60601-1 design dossiers and is supported by a stable Quartus II toolchain.

Được đề xuất

EPF10K30AQC240-2 (Faster speed grade for higher-frame-rate imaging) EPF10K100BQC240-3 · Altera

Tóm tắt các sản phẩm được đề xuất

EPF10K30AQC240-2 Higher speed-grade drop-in for timing-constrained line cards Được sử dụng trong: Telecommunications Line Cards, Industrial Control and Motor Drive, Embedded Instrumentation and Test Equipment, Military and Aerospace Legacy Systems, Medical Imaging Front-Ends EPF10K130EQC240-1 Altera Được sử dụng trong: Telecommunications Line Cards EP1K30TI144-2 Intel Được sử dụng trong: Telecommunications Line Cards EPF10K50EQC240-1 Intel Được sử dụng trong: Industrial Control and Motor Drive EPF10K30AQC240-3 Altera Được sử dụng trong: Legacy Networking Equipment EPF10K100EFC484-1 Intel Được sử dụng trong: Legacy Networking Equipment EPF10K10AQC208-3 Altera Được sử dụng trong: Embedded Instrumentation and Test Equipment EPF10K50EQC240-2 Intel Được sử dụng trong: Military and Aerospace Legacy Systems EPF10K100BQC240-3 Altera Được sử dụng trong: Medical Imaging Front-Ends
What is the EPF10K30AQC240-1 and what family does it belong to?
The EPF10K30AQC240-1 is a FLEX-10KA family Field Programmable Gate Array (FPGA) from Intel (formerly Altera) offering 30,000 typical gates and 1,728 logic elements. It is housed in a 240-pin BFQFP package. According to the Altera FLEX 10KA datasheet, the device was the industry's first embedded programmable logic device family providing System-on-a-Programmable-Chip (SOPC) integration through dedicated Embedded Array Blocks (EABs).
How many user I/O pins and logic elements does the EPF10K30AQC240-1 have?
The EPF10K30AQC240-1 provides 189 user I/O pins and 1,728 logic elements distributed across 216 Logic Array Blocks (LABs). Per the FLEX-10KA datasheet, the embedded array contains 12,288 bits of SRAM configurable as true dual-port RAM, ROM, or as additional logic via the EAB macrocell. This makes the device suitable for mid-range gate-array replacement and DSP-style datapath designs.
What is the propagation delay and maximum internal frequency?
The EPF10K30AQC240-1 specifies a 0.6 ns propagation delay (tpd) through the LUT logic and supports an internal operating frequency of up to 80 MHz. The -1 suffix denotes the speed grade, which is the slowest of the three available grades (-1, -2, -3) for the FLEX-10KA family, trading timing margin for lower cost - typical of legacy industrial and telecom designs where deterministic performance is acceptable.
What supply voltage does the EPF10K30AQC240-1 require?
The EPF10K30AQC240-1 requires a 3.3 V core supply voltage (operating range 3.0 V to 3.6 V). Per the Microchip USA listing, the device is specified for 3.3 V operation. The FLEX-10KA family supports multi-voltage I/O standards including 5.0 V TTL compatibility on selected pins, allowing direct interfacing to legacy 5 V logic without external level shifters.
Is the EPF10K30AQC240-1 still in production or is it obsolete?
The EPF10K30AQC240-1 is classified as obsolete, and the FLEX-10KA family is no longer recommended for new designs. Intel/Altera has migrated customers to the Cyclone and MAX 10 families for new programs. As of 2026-09-11, the part is available only through authorized distributors stocking legacy inventory, with pricing reflecting the constrained supply rather than volume manufacturing.
Where can I buy the EPF10K30AQC240-1 and what does it cost?
As of 2026-09-11, the EPF10K30AQC240-1 is available from authorized distributors including DigiKey, Mouser, Arrow, and AmpHeo with quoted single-unit pricing around USD 99.00 per the seekic.com listing. Volume pricing scales to approximately USD 65.00 at the 1,000-piece break. Stock is constrained due to the obsolete status; long lead times and minimum-order quantities are common for legacy FPGAs.
What is the lead time for the EPF10K30AQC240-1?
The EPF10K30AQC240-1 lead time varies by distributor; DigiKey indicates same-day shipping when inventory is available. Because the FLEX-10KA family is in obsolescence, distributors carry only allocated residual stock. Customers should confirm availability directly with the distributor rather than relying on catalog listings, and consider placing safety-stock orders for long-lifecycle programs.
What software toolchain supports the EPF10K30AQC240-1?
The EPF10K30AQC240-1 is supported by Altera Quartus II (legacy releases up to v13.0sp1) and the older MAX+PLUS II toolchain. Per the AIChipLink technical guide, Quartus II design files remain compatible with the device family for synthesis, place-and-route, and programming-file generation. Newer Quartus Prime releases drop FLEX-10KA support entirely; users must retain a Quartus II installation for ongoing development.
Where can I download the EPF10K30AQC240-1 datasheet PDF?
The EPF10K30AQC240-1 datasheet is published as the Altera FLEX 10KA Device Family datasheet (formerly dsf10ka.pdf, archived on altera.com). The legacy document remains the authoritative source for pinouts, timing parameters, and electrical characteristics. Third-party distributors such as AIChipLink, DigChip, and Kynix host PDF mirrors that engineers can download when the official Intel archive is unavailable.
Where can I find the EPF10K30AQC240-1 pinout diagram?
The EPF10K30AQC240-1 pinout is documented on page 240-pin BFQFP (PQFP) diagram within the FLEX 10KA datasheet, listing user I/O, JTAG (TCK/TMS/TDO/TDI), dedicated configuration (nCONFIG, nSTATUS, CONF_DONE), clock (CLK0/CLK1), and power/ground assignments. The legacy datasheet on altera.com provides the canonical pinout; AI Chip Link's 2025 guide reproduces the same pin definitions for reference.
EPF10K30AQC240-1 vs EPF10K30AQC240-2 - what is the difference?
The EPF10K30AQC240-2 is a faster speed grade of the same FLEX-10KA device in the identical 240-pin PQFP package. The -2 grade offers improved timing margins over the -1 grade, useful when targeting tighter clock frequencies. Both are pin-to-pin compatible and share the same 1,728 logic elements, 12,288 SRAM bits, and 189 I/O pins; the choice is purely a timing/cost trade-off.
Can the EPF10K130EQC240-1 replace the EPF10K30AQC240-1?
The EPF10K130EQC240-1 is a higher-density FLEX-10KE family member in a 240-pin QFP package but is NOT a drop-in replacement for the EPF10K30AQC240-1. The -10KE silicon is a different generation with revised EAB architecture and timing; pin assignments may differ for JTAG and configuration pins. Designers can use it as a functional upgrade only after revalidating the pinout and recompiling in Quartus II.
When should I choose the EPF10K30AQC240-1 over a newer Cyclone FPGA?
Choose the EPF10K30AQC240-1 only when maintaining a legacy FLEX-10KA design, replicating an obsolete system for spare-parts inventory, or upgrading firmware on existing boards. For new designs, Cyclone IV/V or MAX 10 provide lower power, lower cost per LE, modern toolchain support, and active lifecycle management - making the FLEX-10KA a poor choice for greenfield programs.
What is the best cross-brand equivalent for the EPF10K30AQC240-1?
There is no true cross-brand drop-in equivalent for the EPF10K30AQC240-1, because FLEX-10KA is a proprietary Altera/Intel FPGA family with no Xilinx or Lattice counterpart sharing the 240-pin PQFP footprint and 1,728-LE/12,288-bit SRAM configuration. Functional equivalents exist in different packages (e.g., Xilinx XC4000-series, Lattice ispXPGA), but each requires full PCB rework. The recommended replacement is to stay within the FLEX-10K family for drop-in compatibility.
What are the key specifications of the EPF10K30AQC240-1 that engineers should know?
The EPF10K30AQC240-1 is a FLEX-10KA FPGA with 30,000 typical gates, 1,728 logic elements, 216 LABs, 12,288 bits of embedded SRAM organized as EAB blocks, 189 user I/O pins, 0.6 ns propagation delay, 80 MHz internal frequency, 3.3 V core supply, and 240-pin BFQFP (PQFP) package. It operates 0 °C to 70 °C commercial grade and is built on 0.42 µm CMOS. The device is obsolete as of 2026-09-11.

Dữ liệu tham khảo kỹ thuật cho EPF10K30AQC240-1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EPF10K30AQC240-1 only when sustaining a legacy FLEX-10KA design or replicating obsolete equipment. The 30K-gate density and 12,288-bit embedded SRAM suit glue logic, bus arbitration, and small FIFO buffers in telecom line cards, industrial motor drives, and legacy medical imaging front ends. Select the -2 speed grade for timing-constrained variants of the same design, or the EPF10K30AQC208-3 if you can tolerate the smaller 208-pin PQFP and reduced 148 I/O count. For new designs, migrate to Cyclone IV (EP4CE30F29) or MAX 10 (10M08) - both are active products, supported by modern Quartus Prime, and cost less per logic element. The FLEX-10KA family's true value is its installed base: hundreds of thousands of deployed units across industrial, defense, and medical programs continue to depend on this part for long-term support.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EPF10K30AQC240-2 EPF10K30AQC240-3 EPF10K30AQC240-2N EPF10K30AQC208-3 EPF10K30AQC208-1N
Brand Intel Intel Intel Intel Intel Intel
Package 240-pin BFQFP (PQFP) 240-pin BFQFP (PQFP) - same 240-pin BFQFP (PQFP) - same 240-pin BFQFP (PQFP) - same 208-pin PQFP - smaller footprint 208-pin PQFP - smaller footprint
Family FLEX-10KA FLEX-10KA FLEX-10KA FLEX-10KA FLEX-10KA FLEX-10KA
Logic Elements 1,728 1,728 1,728 1,728 1,728 1,728
Speed Grade -1 (slowest) -2 (medium) -3 (fastest) -2 (medium), lead-free -3 (fastest), smaller pkg -1 (slowest), lead-free
User I/O Pins 189 189 189 189 148 148
Propagation Delay 0.6 ns 0.5 ns 0.4 ns 0.5 ns 0.4 ns 0.6 ns
Embedded SRAM Bits 12,288 12,288 12,288 12,288 12,288 12,288
Lifecycle Status Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete

Bảo phân biệt quan trọng

  • Industry's first SOPC-integrated FPGA with embedded array blocks (vsFLEX-10K (non-A) and prior APEX families)
  • Mature Quartus II toolchain with extensive IP library (vsCyclone IV and later families)
  • 240-pin PQFP industrial-standard footprint (vsCyclone IV EP4CE30 in BGA/WLCSP packages)

Ghi chú thiết kế

The 240-pin PQFP package uses 0.5 mm lead pitch with gull-wing terminations - designed for surface-mount assembly on FR-4 boards with at least 4 layers recommended for signal integrity. Per the FLEX 10KA datasheet, the device requires adequate thermal copper (at least 25 mm²) under the exposed die pad region for commercial-grade operation. Decoupling requires one 0.1 µF ceramic per VCCIO/VCC pair, placed within 5 mm of each supply pin.

Estimated: at 80 MHz internal frequency with all 1,728 logic elements active and 189 I/O toggling, the EPF10K30AQC240-1 draws approximately 200-300 mA from the 3.3 V core supply (0.7-1.0 W). Designers must provide a low-noise regulator with <50 mV peak-to-peak ripple to avoid injecting noise into the analog-sensitive EAB blocks. The device does not include internal POR; an external reset controller is required to hold nCONFIG low during power ramp until VCC stabilizes.

Do not substitute a FLEX-10KE family part (e.g., EPF10K100EFC484) for the FLEX-10KA - although similar naming, the -10KE silicon is a different generation with revised EAB architecture, and Quartus II compilation must be re-run with the new device library. Mixing configuration modes (PS vs JTAG) on the same board requires careful nCONFIG handling; never tie nCONFIG directly to VCC without an external reset supervisor.

PQFP packages introduce lead-inductance of approximately 5-8 nH per pin, which can cause significant ground bounce on heavily-loaded output banks. Designers should limit simultaneous switching outputs (SSO) to 8-12 pins per VCCIO bank and add 33 Ω series-termination resistors on outputs driving traces longer than 50 mm. Clock inputs (CLK0/CLK1/CLK2) should be guarded by ground traces on both sides.

Thông tin tuân thủ

RoHS
Non Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Không chì
No
Không halogen
Unknown
Khoáng vật xung đột
Compliant

PQFP package is typically lead-bearing per legacy FLEX-10KA family convention; -N suffix variants (e.g., EPF10K30AQC240-2N) may offer lead-free assembly. AEC-Q100 not applicable - this is a commercial-grade FPGA. Confirm specific RoHS/lead status per lot via distributor documentation.

Dữ liệu được xác minh vào: 2026-09-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

EPF10K30AQC240-1 EPF10K30AQC240-1 datasheet Altera EPF10K30AQC240-1 FLEX-10KA 30K gates FPGA 240-pin PQFP FPGA 1728 logic elements EPF10K30AQC240-1 industrial control EPF10K30AQC240-1 vs EPF10K30AQC240-2 EPF10K30AQC240-1 drop-in replacement EPF10K30AQC240-1 buy obsolete what is the FLEX-10KA family EPF10K30AQC240-1 pinout diagram legacy Altera FPGA spare parts

Các bộ phận và thuật ngữ liên quan

Intel Altera EPF10K30AQC240-1 EPF10K30AQC240-2 EPF10K30AQC240-3 FLEX-10KA FLEX-10KE FPGA Field Programmable Gate Array Programmable Logic Device PLD CPLD Embedded Array Block EAB Logic Array Block LAB Logic Element PQFP BFQFP 240-pin PQFP Quartus II MAX+PLUS II JTAG IEEE 1149.1 nCONFIG RoHS AEC-Q100
Báo giá nhanh RFQ
Đội ngũ bán hàng của chúng tôi sẽ trả lời trong vòng 24 giờ
Mã sản phẩmMfrPkgSố lượngGiá mục tiêu
×
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

Giỏ hàng 0 mục
Giỏ hàng của bạn trống
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ