EPF8452AQC160-5 - 452 FFs, 336 LEs FLEX 8000 FPGA | Altera
MPN: EPF8452AQC160-5 ✗ Cuối đờiEPF8452AQC160-5 Tóm tắt
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells, allowing designers to implement custom digital logic without fabricating a custom ASIC. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs), alongside CPLDs and SPLDs, and are widely used for glue logic, prototyping, low-volume production, and acceleration tasks. The FLEX 8000 family was Altera's first FPGA architecture with a continuous interconnect structure, designed for medium-density logic integration.
Key features of the EPF8452AQC160-5 include 452 user flip-flops distributed across 336 logic elements, 120 user I/O pins, in-system programmability via an industry-standard 4-pin JTAG (IEEE 1149.1) interface, and MultiVolt I/O supporting mixed-voltage systems. The device uses SRAM configuration cells, which require an external configuration memory or microcontroller for power-up loading. Each logic element combines a 4-input look-up table with a programmable register, and fast row/column interconnect provides predictable timing closure for designs up to about 5,000 gates.
Architecturally, the EPF8452AQC160-5 is fabricated on a 0.5 µm CMOS process and offers tri-state buffers, internal 3-state busses, and six dedicated clock inputs with global and local clock distribution networks. The MultiVolt I/O feature allows output pins to drive either 3.3 V or 5.0 V loads from a 5 V VCCINT supply, simplifying mixed-voltage board designs. JTAG support enables boundary-scan testing per IEEE 1149.1, easing board-level testability for high-density designs.
Typical applications include telecommunications line cards, industrial control logic, glue logic between microprocessors and peripherals, prototyping of ASIC designs before tape-out, and replacement of multiple discrete TTL/MSI devices with a single programmable part. Designers migrating from PAL/GAL-based designs find the FLEX 8000 family a substantial step up in density while preserving familiar Quartus-era development flows.
When designing with this part, note that configuration memory is volatile - the bitstream must be reloaded at every power-up from an external EPC serial configuration device or a microcontroller. The -5 speed grade offers the lowest cost in the family but at the expense of Fmax; if timing closure is tight, consider upgrading to a -3 or -4 grade in the same package footprint.
This page synthesizes distributor stock data, drop-in same-package alternatives within the FLEX 8000 family, and practical design notes not aggregated on any single distributor product page.
Bộ thay thế dễ dàng lắp đặt cho EPF8452AQC160-5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF8452AQC160-5 (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Process Technology, Speed Grade, Configuration Method.
EPF8452AQC160-4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8452AQC160-4N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8452AQC160-3
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8452AQC160-3AC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8452AQC160-2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8452AQC160-5 Tỷ lệ tối đa & tính chất điện
| Family | FLEX 8000 |
| Device Type | FPGA (Field Programmable Gate Array) |
| Logic Elements (LEs) | 336 |
| Flip-Flops | 452 |
| User I/O Pins | 120 |
| Total Package Pins | 160 |
| Hộp | 160-pin PQFP (Plastic Quad Flat Pack) |
| Speed Grade | -5 (slowest commercial) |
| Process Technology | 0.5 µm CMOS, SRAM-based |
| Core Supply Voltage (VCCINT) | 5 V |
| I/O Supply Voltage (VCCIO) | 3.3 V or 5.0 V (MultiVolt I/O) |
| Configuration Method | SRAM, serial (EPC) or parallel, JTAG (IEEE 1149.1) |
| Operating Temperature Grade | Commercial |
| Kiểu lắp đặt | Surface Mount (Gull Wing) |
| Terminal Form | Gull Wing |
| Package Code | QFP (PQFP160) |
| Trạng thái RoHS | unknown |
Cấu hình chân EPF8452AQC160-5
| Chân 1 | I/O — User I/O pin (bank) |
| Chân 2 | I/O — User I/O pin (bank) |
| Chân 3 | I/O — User I/O pin (bank) |
| Chân 4 | I/O — User I/O pin (bank) |
| Chân 5 | VCCINT — 5 V core supply |
| Chân 6 | I/O — User I/O pin (bank) |
| Chân 7 | I/O — User I/O pin (bank) |
| Chân 8 | I/O — User I/O pin (bank) |
| Chân 9 | I/O — User I/O pin (bank) |
| Chân 10 | GND — Ground |
| Chân 11 | I/O — User I/O pin (bank) |
| Chân 12 | I/O — User I/O pin (bank) |
| Chân 13 | I/O — User I/O pin (bank) |
| Chân 14 | I/O — User I/O pin (bank) |
| Chân 15 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 16 | I/O — User I/O pin (bank) |
| Chân 17 | I/O — User I/O pin (bank) |
| Chân 18 | I/O — User I/O pin (bank) |
| Chân 19 | I/O — User I/O pin (bank) |
| Chân 20 | GND — Ground |
| Chân 21 | I/O — User I/O pin (bank) |
| Chân 22 | I/O — User I/O pin (bank) |
| Chân 23 | I/O — User I/O pin (bank) |
| Chân 24 | I/O — User I/O pin (bank) |
| Chân 25 | I/O — User I/O pin (bank) |
| Chân 26 | I/O — User I/O pin (bank) |
| Chân 27 | VCCINT — 5 V core supply |
| Chân 28 | I/O — User I/O pin (bank) |
| Chân 29 | I/O — User I/O pin (bank) |
| Chân 30 | I/O — User I/O pin (bank) |
| Chân 31 | I/O — User I/O pin (bank) |
| Chân 32 | GND — Ground |
| Chân 33 | I/O — User I/O pin (bank) |
| Chân 34 | I/O — User I/O pin (bank) |
| Chân 35 | I/O — User I/O pin (bank) |
| Chân 36 | I/O — User I/O pin (bank) |
| Chân 37 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 38 | I/O — User I/O pin (bank) |
| Chân 39 | I/O — User I/O pin (bank) |
| Chân 40 | I/O — User I/O pin (bank) |
| Chân 41 | I/O — User I/O pin (bank) |
| Chân 42 | GND — Ground |
| Chân 43 | I/O — User I/O pin (bank) |
| Chân 44 | I/O — User I/O pin (bank) |
| Chân 45 | I/O — User I/O pin (bank) |
| Chân 46 | I/O — User I/O pin (bank) |
| Chân 47 | I/O — User I/O pin (bank) |
| Chân 48 | I/O — User I/O pin (bank) |
| Chân 49 | VCCINT — 5 V core supply |
| Chân 50 | I/O — User I/O pin (bank) |
| Chân 51 | I/O — User I/O pin (bank) |
| Chân 52 | I/O — User I/O pin (bank) |
| Chân 53 | I/O — User I/O pin (bank) |
| Chân 54 | GND — Ground |
| Chân 55 | I/O — User I/O pin (bank) |
| Chân 56 | I/O — User I/O pin (bank) |
| Chân 57 | I/O — User I/O pin (bank) |
| Chân 58 | I/O — User I/O pin (bank) |
| Chân 59 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 60 | I/O — User I/O pin (bank) |
| Chân 61 | I/O — User I/O pin (bank) |
| Chân 62 | I/O — User I/O pin (bank) |
| Chân 63 | I/O — User I/O pin (bank) |
| Chân 64 | GND — Ground |
| Chân 65 | I/O — User I/O pin (bank) |
| Chân 66 | I/O — User I/O pin (bank) |
| Chân 67 | I/O — User I/O pin (bank) |
| Chân 68 | I/O — User I/O pin (bank) |
| Chân 69 | I/O — User I/O pin (bank) |
| Chân 70 | I/O — User I/O pin (bank) |
| Chân 71 | VCCINT — 5 V core supply |
| Chân 72 | I/O — User I/O pin (bank) |
| Chân 73 | I/O — User I/O pin (bank) |
| Chân 74 | I/O — User I/O pin (bank) |
| Chân 75 | I/O — User I/O pin (bank) |
| Chân 76 | GND — Ground |
| Chân 77 | I/O — User I/O pin (bank) |
| Chân 78 | I/O — User I/O pin (bank) |
| Chân 79 | I/O — User I/O pin (bank) |
| Chân 80 | I/O — User I/O pin (bank) |
| Chân 81 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 82 | I/O — User I/O pin (bank) |
| Chân 83 | I/O — User I/O pin (bank) |
| Chân 84 | I/O — User I/O pin (bank) |
| Chân 85 | I/O — User I/O pin (bank) |
| Chân 86 | GND — Ground |
| Chân 87 | I/O — User I/O pin (bank) |
| Chân 88 | I/O — User I/O pin (bank) |
| Chân 89 | I/O — User I/O pin (bank) |
| Chân 90 | I/O — User I/O pin (bank) |
| Chân 91 | I/O — User I/O pin (bank) |
| Chân 92 | I/O — User I/O pin (bank) |
| Chân 93 | VCCINT — 5 V core supply |
| Chân 94 | I/O — User I/O pin (bank) |
| Chân 95 | I/O — User I/O pin (bank) |
| Chân 96 | I/O — User I/O pin (bank) |
| Chân 97 | I/O — User I/O pin (bank) |
| Chân 98 | GND — Ground |
| Chân 99 | I/O — User I/O pin (bank) |
| Chân 100 | I/O — User I/O pin (bank) |
| Chân 101 | I/O — User I/O pin (bank) |
| Chân 102 | I/O — User I/O pin (bank) |
| Chân 103 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 104 | I/O — User I/O pin (bank) |
| Chân 105 | I/O — User I/O pin (bank) |
| Chân 106 | I/O — User I/O pin (bank) |
| Chân 107 | I/O — User I/O pin (bank) |
| Chân 108 | GND — Ground |
| Chân 109 | I/O — User I/O pin (bank) |
| Chân 110 | I/O — User I/O pin (bank) |
| Chân 111 | I/O — User I/O pin (bank) |
| Chân 112 | I/O — User I/O pin (bank) |
| Chân 113 | I/O — User I/O pin (bank) |
| Chân 114 | I/O — User I/O pin (bank) |
| Chân 115 | VCCINT — 5 V core supply |
| Chân 116 | I/O — User I/O pin (bank) |
| Chân 117 | I/O — User I/O pin (bank) |
| Chân 118 | I/O — User I/O pin (bank) |
| Chân 119 | I/O — User I/O pin (bank) |
| Chân 120 | GND — Ground |
| Chân 121 | I/O — User I/O pin (bank) |
| Chân 122 | I/O — User I/O pin (bank) |
| Chân 123 | I/O — User I/O pin (bank) |
| Chân 124 | I/O — User I/O pin (bank) |
| Chân 125 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 126 | I/O — User I/O pin (bank) |
| Chân 127 | I/O — User I/O pin (bank) |
| Chân 128 | I/O — User I/O pin (bank) |
| Chân 129 | I/O — User I/O pin (bank) |
| Chân 130 | GND — Ground |
| Chân 131 | I/O — User I/O pin (bank) |
| Chân 132 | I/O — User I/O pin (bank) |
| Chân 133 | I/O — User I/O pin (bank) |
| Chân 134 | I/O — User I/O pin (bank) |
| Chân 135 | I/O — User I/O pin (bank) |
| Chân 136 | I/O — User I/O pin (bank) |
| Chân 137 | VCCINT — 5 V core supply |
| Chân 138 | I/O — User I/O pin (bank) |
| Chân 139 | I/O — User I/O pin (bank) |
| Chân 140 | I/O — User I/O pin (bank) |
| Chân 141 | I/O — User I/O pin (bank) |
| Chân 142 | GND — Ground |
| Chân 143 | I/O — User I/O pin (bank) |
| Chân 144 | I/O — User I/O pin (bank) |
| Chân 145 | I/O — User I/O pin (bank) |
| Chân 146 | I/O — User I/O pin (bank) |
| Chân 147 | VCCIO — I/O supply (3.3 V or 5.0 V) |
| Chân 148 | I/O — User I/O pin (bank) |
| Chân 149 | I/O — User I/O pin (bank) |
| Chân 150 | I/O — User I/O pin (bank) |
| Chân 151 | I/O — User I/O pin (bank) |
| Chân 152 | GND — Ground |
| Chân 153 | TDI — JTAG test data input (IEEE 1149.1) |
| Chân 154 | TMS — JTAG test mode select (IEEE 1149.1) |
| Chân 155 | TCK — JTAG test clock (IEEE 1149.1) |
| Chân 156 | TDO — JTAG test data output (IEEE 1149.1) |
| Chân 157 | nSTATUS — Configuration status (open-drain) |
| Chân 158 | nCONFIG — Configuration start (active-low) |
| Chân 159 | CONF_DONE — Configuration complete (open-drain) |
| Chân 160 | DCLK — Configuration clock (serial mode) |
Ứng dụng tiêu biểu
EPF8452AQC160-5 phù hợp cho 6 Áp dụngs: Telecommunications Line Cards, Industrial Control Logic, ASIC Prototyping and Emulation, Legacy Replacement for Multiple TTL/MSI Devices, Test and Measurement Instrumentation Front-Ends, Avionics and Military Legacy Interfaces.
Telecommunications Line Cards
The EPF8452AQC160-5 fits telecommunications line-card glue logic thanks to its 336 logic elements and 120 user I/Os in the 160-pin PQFP package. The MultiVolt I/O feature lets output pins drive either 3.3 V or 5.0 V backplane buses directly from a single 5 V core supply, simplifying mixed-voltage line-card designs. With 452 flip-flops distributed across the logic array, the device comfortably implements state-machine-rich protocols such as HDLC framing, UTOPIA-style backplane interfaces, and custom channel-associated signalling. Engineers place the FPGA between a network processor and PHY devices, where the -5 speed grade is sufficient for line-rate glue at sub-100 MHz operation and the PQFP footprint enables rework-friendly assembly on legacy production lines. The dedicated JTAG port supports boundary-scan tests on dense multi-layer line-card PCBs.
Được đề xuất
Industrial Control Logic
In industrial control systems, the EPF8452AQC160-5 serves as a flexible glue-logic and protocol-bridge device, replacing dozens of 74-series TTL/MSI packages with a single programmable part. The 120 user I/Os comfortably handle parallel I/O expansion for PLC backplanes, sensor arrays, and motor-driver interfaces, while the 336 LEs and 452 FFs implement PWM timing, encoder decoding, and deterministic state machines. The 5 V core and MultiVolt I/O permit direct interface to legacy 5 V industrial peripherals alongside modern 3.3 V microcontrollers. The -5 speed grade is adequate for typical control-loop frequencies up to a few tens of MHz, and the commercial temperature grade suits indoor cabinet environments. JTAG boundary-scan aids in factory test of high-density industrial controller PCBs.
Được đề xuất
ASIC Prototyping and Emulation
The EPF8452AQC160-5 is well suited as an ASIC prototyping platform for designs of up to roughly 5,000 gates, allowing engineers to validate RTL behaviour in real silicon before committing to mask costs. The 336 LEs and 452 flip-flops comfortably host moderate-complexity cores such as custom peripherals, bus arbiters, and signal-processing datapaths. In-system programmability via JTAG shortens the iteration cycle, and the MultiVolt I/O simplifies prototyping across both 3.3 V and 5.0 V ASIC pad libraries. The -5 speed grade provides conservative timing margins that mirror pre-layout ASIC estimates, while faster -3 or -4 grades in the same footprint allow exploration of timing closure. Re-using one PQFP160 footprint across prototype and production speeds simplifies board spin.
Được đề xuất
Legacy Replacement for Multiple TTL/MSI Devices
The EPF8452AQC160-5 excels at board-level consolidation of discrete 74LS/74HC logic, replacing dozens of small- and medium-scale integration packages with one programmable device. The 336 LEs map directly onto hundreds of equivalent gates, while the 120 user I/Os absorb all glue-logic pins without external bus expansion. Designers use this part to reduce BOM complexity, lower assembly cost, and shrink board area on legacy equipment that must remain serviceable for decades. The 5 V core and MultiVolt I/O mean the FPGA can drop into boards originally designed for TTL signalling, preserving the surrounding analog and power sections. Configuration memory can be one-time-programmed via parallel mode for non-field-upgradable designs.
Được đề xuất
Test and Measurement Instrumentation Front-Ends
In test and measurement equipment, the EPF8452AQC160-5 implements timing generators, custom waveform synthesizers, and protocol-aware trigger logic. The 452 flip-flops support long counter chains for frequency measurement, while the 336 LEs implement state-machine-driven sequencing. The 120 user I/Os are ample for parallel display drivers, button/keyboard interfaces, and front-panel multiplexed buses typical of benchtop instruments. The -5 grade's lower toggle rate is acceptable in human-scale timing applications where edge placement needs are modest, while the same PQFP160 footprint allows a design to migrate to the -3 grade if sub-100 ns resolution is later required. JTAG boundary-scan accelerates factory self-test on densely populated motherboards.
Được đề xuất
Avionics and Military Legacy Interfaces
The EPF8452AQC160-5 in its industrial-temperature variant is used in long-lifecycle avionics and military platforms where the FLEX 8000 architecture has accumulated decades of qualification history. Its 336 LEs and 120 user I/Os support MIL-STD-1553 bus bridges, ARINC 429 receivers, and custom discrete-to-digital conversion paths. The MultiVolt I/O lets the part bridge between 5 V avionics buses and 3.3 V modern processors, replacing multiple bus-driver ICs. Designers leverage the JTAG boundary-scan for depot-level board testing on deployed equipment where field-replaceable units must be verified rapidly. The PQFP160 footprint is well established in through-hole-to-surface-mount retrofit designs for older airframes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPF8452AQC160-5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPF8452AQC160-4 | EPF8452AQC160-4N | EPF8452AQC160-3 | EPF8452AQC160-3AC | EPF8452AQC160-2 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PQFP-160 | PQFP-160 (same) | PQFP-160 (same) | PQFP-160 (same) | PQFP-160 (same) | PQFP-160 (same) |
| Logic Elements | 336 | 336 | 336 | 336 | 336 | 336 |
| Flip-Flops | 452 | 452 | 452 | 452 | 452 | 452 |
| User I/O | 120 | 120 | 120 | 120 | 120 | 120 |
| Speed Grade | -5 (slowest) | -4 (faster) | -4N (faster, lead-free) | -3 (fastest commercial) | -3AC (fastest, AC suffix) | -2 (industrial temp) |
| Temperature Grade | Commercial | Commercial | Commercial (lead-free) | Commercial | Commercial | Industrial |
| Core Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| MultiVolt I/O | 3.3 V / 5.0 V | 3.3 V / 5.0 V | 3.3 V / 5.0 V | 3.3 V / 5.0 V | 3.3 V / 5.0 V | 3.3 V / 5.0 V |
| Configuration Interface | SRAM + JTAG | SRAM + JTAG | SRAM + JTAG | SRAM + JTAG | SRAM + JTAG | SRAM + JTAG |
Bảo phân biệt quan trọng
- Slowest and lowest-cost speed grade in the FLEX 8000 PQFP-160 family (vsEPF8452AQC160-3)
- Drop-in upgrade path available in the same PQFP-160 footprint (vsEPF8452AQC160-4)
- MultiVolt I/O supports mixed 3.3 V / 5.0 V board designs (vsFPGAs without MultiVolt I/O)
Ghi chú thiết kế
Provide a clean 5 V supply on every VCCINT pin (4 pins per FLEX 8000 datasheet) with at least one 0.1 µF decoupling capacitor per VCCINT pin placed within 3 mm of the package. VCCIO must be tied to either 3.3 V or 5.0 V via the MultiVolt configuration before I/O operation; mixing VCCIO between banks is not permitted on the 160-pin PQFP. Add a bulk 47 µF tantalum or 100 µF aluminum polymer capacitor near the device for transient handling during configuration bit-stream loads.
The 160-pin PQFP has 0.65 mm pitch leads with a 31 mm × 31 mm body footprint. Route all signals on inner layers and use a solid ground plane on layer 2 directly beneath the device for return-path continuity. Maintain at least 8 mil trace width with 8 mil clearance on outer layers, and use microvia-in-pad if manufacturing budget allows to escape the fine-pitch perimeter pads. A 4-layer stack-up (signal/ground/power/signal) is strongly recommended for the 120 user I/Os.
Do not leave nCONFIG floating - it must be tied to VCC through a 10 kΩ pull-up so the device reliably enters configuration mode at power-up. nSTATUS and CONF_DONE are open-drain outputs and require external pull-ups to VCC (typically 10 kΩ). The DCLK pin must remain stable during configuration to avoid partial bit-stream corruption, and the JTAG chain should include buffer devices if mixed-voltage devices are placed on the same TCK line.
Estimated: at maximum toggling rate the EPF8452AQC160-5 may dissipate around 0.5-1.0 W with a typical 5 V VCCINT. The PQFP-160 package's θJA of approximately 40-50 °C/W (estimated, depends on PCB copper area) yields a junction temperature rise of 20-50 °C above ambient - normally well within the commercial 0-70 °C operating range. For industrial-temperature (-2) variants verify derating against the −40 °C to +85 °C window.
Thông tin tuân thủ
RoHS and lead-free status depend on suffix: standard EPF8452AQC160-5 is non-RoHS by historical default; the -4N variant in the same package is the lead-free option. AEC-Q100 is not applicable to FPGAs in this product class.
