ISL8200MIRZ - 10A Current-Share DC/DC Power Module | Renesas
MPN: ISL8200MIRZ ✗ Cuối đờiISL8200MIRZ Tóm tắt
**Background - What is a DC/DC Power Module?** A DC/DC power module is a complete switch-mode power supply (SMPS) miniaturized into a single IC-style package. Unlike a discrete buck converter, which requires the engineer to select and lay out external MOSFETs, an inductor, and compensation components, a power module embeds all these building blocks inside the device, leaving only input/output bulk capacitors and a feedback resistor divider external. Power modules belong to the broader category of point-of-load (PoL) converters, which sit on the PCB next to the load they power (FPGA core rail, ASIC, SoC). Within the SMPS family tree, a power module sits below the buck converter hierarchy: buck converter -> step-down regulator -> PoL converter -> power module -> integrated power management IC.
**Key features** of the ISL8200MIRZ include 10A continuous output current, current-share pin for parallel operation up to 60A (six modules), internal 4.5V/20V MOSFETs, internal inductor, internal feedback compensation, adjustable soft-start, power-good indicator, and over-current/over-voltage/thermal protection. The high level of integration eliminates the design and manufacturing risks associated with discrete buck implementations.
**Technical architecture**: The ISL8200MIRZ uses a voltage-mode PWM controller with internal loop compensation. The internal MOSFETs and inductor are co-packaged to minimize parasitic loop inductance, achieving high efficiency (typically >90% at 5V input to 3.3V output at moderate loads) and reduced EMI. The current-share bus allows multiple ISL8200M modules to operate in master-slave configuration with ±10% current matching.
**Typical applications** include datacom/telecom equipment (48V-to-PoL), FPGA/ASIC core and auxiliary rails, servers and storage area networks, and industrial point-of-load regulation. Designers favor it where PCB real estate is constrained or where rapid time-to-market outweighs the per-ampere cost of a discrete design.
**Design consideration**: Place input bulk capacitors within 5 mm of the module's VIN pins to minimize parasitic inductance, and use the exposed thermal pad for both thermal dissipation and the electrical ground return. The current-share pin must be tied together on all paralleled modules; floating it disables parallel operation.
**Unique value**: This page combines distributor pricing, EOL/last-time-buy status, same-family pin-compatible alternatives, and practical parallel-operation notes - information not consolidated on the manufacturer datasheet or distributor product pages.
Bộ thay thế dễ dàng lắp đặt cho ISL8200MIRZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ISL8200MIRZ (cùng hình factor và footprint) — khác nhau ở Output Voltage Range, RoHS Status, Topology.
ISL8200MIRZ-T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ISL8200AM
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ISL8225MIRZ-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ISL8200MIRZ Tỷ lệ tối đa & tính chất điện
| Cấu trúc | Non-Isolated PoL Module, Step-Down (Buck) |
| Số lượng đầu ra | 1 |
| Phạm vi điện áp đầu vào | 4.5 V to 20 V |
| Khoảng điện áp đầu ra | 0.6 V to 6 V (adjustable) |
| Output Current | 10 A continuous |
| Current Share | Yes - parallel up to 6 modules (60 A) |
| Hiệu suất | Up to ~95% (load/input dependent) |
| Integrated Components | PWM controller, MOSFETs, inductor, compensation |
| Đầu ra tốt về điện năng | Yes |
| Bắt đầu mềm | Adjustable (external capacitor) |
| Protection Features | OCP, OVP, OTP, UVLO |
| Nhiệt độ hoạt động | -40 C to +85 C (industrial) |
| Hộp | QFN-style thermally-enhanced surface mount |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant (per Renesas product page) |
Hướng dẫn cấu hình chân ISL8200MIRZ qfn-style thermally-enhanced surface mount
Cấu hình chân cho ISL8200MIRZ (qfn-style thermally-enhanced surface mount gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho ISL8200MIRZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ISL8200MIRZ phù hợp cho 6 Áp dụngs: FPGA Core and Auxiliary Rails, Datacom and Telecom Point-of-Load, Server and Storage ASIC Power, Industrial 12V Bus Systems, Parallel Operation for 60A+ Rails, Test and Measurement Instrumentation.
FPGA Core and Auxiliary Rails
The ISL8200MIRZ is well matched to powering FPGA core, auxiliary, and transceiver rails in datacom and telecom designs. The 10A continuous current and adjustable 0.6V-6V output range cover the typical FPGA rail set: 1.0V core, 1.8V auxiliary, 2.5V transceiver, and 3.3V I/O. The current-share pin enables multiple ISL8200M modules to be paralleled for high-current FPGA cores (>10A), achieving ±10% phase-to-phase current matching without external balancing ICs. Engineers favor this module when PCB real estate is constrained because the integrated inductor, MOSFETs, and compensation eliminate ~20 external components. Post-EOL, the ISL8200AM should be evaluated as an active successor.
Được đề xuất
Datacom and Telecom Point-of-Load
The ISL8200MIRZ was designed specifically for 12V intermediate bus architectures used in datacom and telecom equipment. Accepting 4.5V-20V input, it can be powered directly from a 12V bus or from a front-end 48V-to-12V intermediate bus converter. The 0.6V minimum output supports modern ASIC and SoC core rails, while the 10A capability handles single-rail loads up to ~60W. The high level of integration reduces EMI vs. discrete buck designs, simplifying CE/FCC compliance in dense rack-mount systems.
Được đề xuất
Server and Storage ASIC Power
Server motherboards and RAID controllers demand compact, high-efficiency point-of-load regulation. The ISL8200MIRZ's 90-95% typical efficiency at 12V-to-3.3V conversion keeps thermal rise manageable in 1U/2U rack chassis, and the integrated inductor eliminates a tall through-hole component that would otherwise complicate airflow. The exposed thermal pad provides direct heatsinking to an inner PCB ground plane. Designers of new server boards should note the EOL status and plan migration to the ISL8200AM or a modern alternative PoL IC.
Được đề xuất
Industrial 12V Bus Systems
Industrial PLCs, motor controllers, and ruggedized embedded systems often use a 12V or 24V internal bus. The ISL8200MIRZ accepts up to 20V input, which fits directly off a regulated 12V rail but is below the typical 24V industrial bus voltage. For 24V industrial bus applications, a pre-regulator (24V-to-12V) is required before the ISL8200M. The -40C to +85C industrial temperature range supports harsh factory environments. After the April 2026 EOL, industrial customers should qualify the ISL8200AM or a non-pin-compatible alternative module.
Được đề xuất
Parallel Operation for 60A+ Rails
Up to six ISL8200MIRZ modules can be paralleled via the current-share pin to deliver 60A (or more) to a single high-current rail, making the module useful for ASICs, GPUs, and multi-core processors requiring >50W of core power. The ISHARE bus negotiates master/slave roles automatically, achieving ±10% current matching. Designers must tie the ISHARE pins of all paralleled modules together on the PCB and provide adequate input/output bulk capacitance to handle the combined inrush current at startup. This is a key differentiator vs. discrete PoL solutions which require an external current-share controller.
Được đề xuất
Test and Measurement Instrumentation
Bench-top test equipment, ATE systems, and laboratory instruments demand clean, low-noise rails for precision analog and mixed-signal subsystems. The ISL8200MIRZ provides a fixed-frequency PWM that produces predictable, repeatable EMI signatures, simplifying CE/FCC pre-compliance testing. The PGOOD output enables sequenced power-up of multi-rail instruments, while the adjustable soft-start controls inrush into downstream bulk capacitors. For new instrument designs after EOL, the ISL8200AM offers similar performance in active production status.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ISL8200MIRZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ISL8200MIRZ-T | ISL8200AM | ISL8225MIRZ-T |
|---|---|---|---|---|
| Brand | Renesas Electronics (formerly Intersil) | Renesas Electronics - same | Renesas Electronics - same | Renesas Electronics - same |
| Package | QFN-style thermally-enhanced SMD | QFN-style thermally-enhanced SMD - same | QFN-style thermally-enhanced SMD - same family | QFN-style thermally-enhanced SMD - same family |
| Lifecycle Status | Obsolete (EOL April 2026) | Obsolete (EOL April 2026) | Active (Renesas recommended successor) | Active (same family) |
| Pinout Compatibility | Reference design | Identical (same die) | Same family, verify pin-by-pin vs datasheet | Same family dual-output variant, different pinout - requires PCB review |
Bảo phân biệt quan trọng
- Same-die drop-in option still purchasable (vsISL8200MIRZ-T)
- Active lifecycle status in same family (vsISL8200AM)
- Fully integrated PoL module (controller + FETs + magnetics) (vsDiscrete buck converter designs)
Ghi chú thiết kế
The ISL8200MIRZ uses a thermally-enhanced QFN-style package with a bottom-side exposed thermal pad. The pad MUST be soldered to the PCB ground plane, and the ground plane should extend as a copper pour beneath the module with thermal vias to inner/outer copper layers. At 10A load with 12V-to-3.3V conversion (~87% efficiency), the module dissipates approximately 1.3W - well within the package rating with proper PCB layout. Skipping the thermal pad solder connection or omitting the copper pour can push junction temperature above the +125C limit at high ambient temperatures.
Place input bulk capacitors within 5mm of the module's VIN pins and output capacitors within 5mm of VOUT, using wide copper traces or pours to minimize parasitic inductance. A 22uF ceramic + 100uF polymer aluminum combination per module is a typical starting point; derate capacitance based on DC bias of the ceramic. The exposed thermal pad must be grounded and stitched with thermal vias (typically 0.3mm drill, 1mm pitch, 9-12 vias minimum).
Three common pitfalls when using the ISL8200MIRZ: (1) Floating the ISHARE pin disables parallel operation - when using a single module, tie ISHARE to a defined voltage per datasheet (do not leave NC); (2) Exceeding 20V input triggers permanent MOSFET damage - add a TVS or upstream fuse for 24V industrial bus applications; (3) Post-April 2026 EOL, verify part date code and chain-of-custody from independent distributors to avoid counterfeit or remarked parts.
The ISL8200MIRZ was discontinued by Renesas in April 2026 per industry reporting. No pin-compatible drop-in successor has been released. For new designs, Renesas recommends the ISL8200AM (active status, same 10A/6V/20V family). Cross-brand alternatives (TI TPSM, ADI LTM series) require complete PCB redesign due to different pinouts. Last-time-buy inventory may be available from independent distributors but should be qualified and date-coded before use in production designs.
Thông tin tuân thủ
RoHS and REACH compliance per Renesas/Intersil product page. Not AEC-Q100 qualified - this is a commercial/industrial-grade power module, not an automotive part. Post-EOL, compliance certificates for new manufacturing lots are no longer issued; existing inventory retains the compliance status it was originally qualified under.
