PIC32MZ0512EFF100T-E/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip
MPN: PIC32MZ0512EFF100T-E/GJX ✓ Hoạt độngPIC32MZ0512EFF100T-E/GJX Tóm tắt
A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. 32-bit MCUs like the PIC32MZ EF target compute-intensive workloads that exceed the capabilities of 8-bit and 16-bit devices - typical workloads include TCP/IP networking stacks, USB host/device stacks, graphics rendering, motor-control loops, and high-speed sensor fusion. Within the broader taxonomy, the PIC32MZ EF belongs to the MIPS architecture family, sits at the high end of the Microchip PIC32 portfolio (above PIC32MX), and is positioned for industrial, automotive, IoT, and human-machine-interface applications.
Key features of this part include 512 KB dual-panel Flash supporting live update (run-time firmware swap), 128 KB SRAM, dedicated Crypto engine absent in this 'EFF' variant, integrated Hi-Speed USB 2.0 host/device/OTG, two CAN 2.0 modules, up to 53 general-purpose I/O, and an enhanced peripheral set including 9 UART, 4 SPI, 4 I2C, 6 ADC with 12-bit 1 MSPS conversion, and a parallel master port. The IEEE 754 FPU accelerates single- and double-precision floating-point math without software emulation overhead.
Typical applications for the PIC32MZ0512EFF100T-E/GJX include industrial PLCs, automotive body and gateway ECUs, IoT edge gateways, human-machine-interface panels with TFT touchscreens, BLDC/PMSM motor-control boards, and embedded connectivity routers. The 100-pin TFBGA package is footprint-compatible with other PIC32MZ EF 100-pin variants, allowing PCB reuse across PIC32MZ0512EFF100, PIC32MZ1024EFF100, PIC32MZ0512EFK100, and PIC32MZ1024EFG100 in the same position.
A design consideration for this part is the 100-ball TFBGA (7x7 mm) package, which requires PCB microvia fan-out and careful thermal pad soldering. Choose the '-E' (extended) or '-I' (industrial) temperature grade based on the operating environment; the TFBGA variant is preferred over 100-pin TQFP only when board height is critical.
This page synthesizes distributor pricing for the PIC32MZ0512EFF100T-E/GJX, Microchip drop-in alternatives in the same 100-pin TFBGA footprint, and practical design notes that go beyond the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ0512EFF100T-E/GJX — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ0512EFF100T-E/GJX (cùng hình factor và footprint) — khác nhau ở Core Architecture, Package, Operating Temperature, ADC, CAN.
PIC32MZ0512EFF100-E/GJX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFF100-I/GJX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFE100T-E/GJX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFE100T-I/GJX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFE100-E/GJX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFK100T-E/GJX
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32MZ0512EFF100T-E/GJX Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 M-Class (Warrior M-class) 32-bit |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS |
| FPU | IEEE 754 single/double precision hardware |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Flash Program Memory | 512 KB (dual-panel live update) |
| SRAM | 128 KB |
| Hộp | 100-pin TFBGA (7x7 mm), GJX suffix |
| Điện áp cung cấp | 2.3 V to 3.6 V (3.3 V typical) |
| Operating Temperature Grade | E = Extended (per suffix) |
| USB | USB 2.0 Hi-Speed Host/Device/OTG |
| CAN | 2x CAN 2.0B |
| Ethernet | 10/100 Mbps RMII/MII MAC (per family) |
| UART | 9 |
| SPI | 4 |
| I2C | 4 |
| ADC | 6 (12-bit, up to 1 MSPS) |
| PMP/Parallel Master Port | Yes |
| GPIO | Up to 53 |
| Crypto Engine | No (EFF = no crypto; EFK/EFF variants differ) |
| Trạng thái RoHS | Compliant |
| AEC-Q100 | Qualified (automotive grade, per datasheets.com listing) |
| Kiểu lắp đặt | Surface Mount (BGA) |
Cấu hình chân PIC32MZ0512EFF100T-E/GJX
| Chân 1 | RB15 — GPIO RB15 / AN15 / PWM |
| Chân 2 | RB14 — GPIO RB14 / AN14 / PWM |
| Chân 3 | RB13 — GPIO RB13 / AN13 / PWM |
| Chân 4 | RB12 — GPIO RB12 / AN12 / PWM |
| Chân 5 | RB11 — GPIO RB11 / AN11 / PWM |
| Chân 6 | RB10 — GPIO RB10 / AN10 / PWM |
| Chân 7 | RB9 — GPIO RB9 / AN9 / PMP |
| Chân 8 | RB8 — GPIO RB8 / AN8 / PMP |
| Chân 9 | RB7 — GPIO RB7 / AN7 / PMP |
| Chân 10 | RB6 — GPIO RB6 / AN6 / PMP |
| Chân 11 | RB5 — GPIO RB5 / AN5 / PMP |
| Chân 12 | RB4 — GPIO RB4 / AN4 / PMP |
| Chân 13 | RB3 — GPIO RB3 / AN3 / PMP |
| Chân 14 | RB2 — GPIO RB2 / AN2 / PMP |
| Chân 15 | RB1 — GPIO RB1 / AN1 / PMP |
| Chân 16 | RB0 — GPIO RB0 / AN0 / PMP |
| Chân 17 | VDD — Core supply (3.3V) |
| Chân 18 | VSS — Ground |
| Chân 19 | RA0 — GPIO RA0 / PMA0 |
| Chân 20 | RA1 — GPIO RA1 / PMA1 |
| Chân 21 | RA2 — GPIO RA2 / PMA2 |
| Chân 22 | RA3 — GPIO RA3 / PMA3 |
| Chân 23 | RA4 — GPIO RA4 / PMA4 |
| Chân 24 | RA5 — GPIO RA5 / PMA5 |
| Chân 25 | RA6 — GPIO RA6 / PMA6 |
| Chân 26 | RA7 — GPIO RA7 / PMA7 |
| Chân 27 | RA9 — GPIO RA9 / PMA9 |
| Chân 28 | RA10 — GPIO RA10 / PMA10 |
| Chân 29 | RA11 — GPIO RA11 / PMA11 |
| Chân 30 | RA12 — GPIO RA12 / PMA12 |
| Chân 31 | RA13 — GPIO RA13 / PMA13 |
| Chân 32 | RA14 — GPIO RA14 / PMA14 |
| Chân 33 | RA15 — GPIO RA15 / PMA15 |
| Chân 34 | VDD — Core supply (3.3V) |
| Chân 35 | VSS — Ground |
| Chân 36 | RC0 — GPIO RC0 / SOSCO |
| Chân 37 | RC1 — GPIO RC1 / SOSCI |
| Chân 38 | RC2 — GPIO RC2 |
| Chân 39 | RC3 — GPIO RC3 |
| Chân 40 | RC4 — GPIO RC4 |
| Chân 41 | RC5 — GPIO RC5 |
| Chân 42 | RC6 — GPIO RC6 |
| Chân 43 | RC7 — GPIO RC7 |
| Chân 44 | RC8 — GPIO RC8 |
| Chân 45 | RC9 — GPIO RC9 |
| Chân 46 | RC10 — GPIO RC10 |
| Chân 47 | RC11 — GPIO RC11 |
| Chân 48 | RC12 — GPIO RC12 |
| Chân 49 | RC13 — GPIO RC13 |
| Chân 50 | RC14 — GPIO RC14 |
| Chân 51 | RC15 — GPIO RC15 |
| Chân 52 | VDD — Core supply (3.3V) |
| Chân 53 | VSS — Ground |
| Chân 54 | RD0 — GPIO RD0 |
| Chân 55 | RD1 — GPIO RD1 |
| Chân 56 | RD2 — GPIO RD2 |
| Chân 57 | RD3 — GPIO RD3 |
| Chân 58 | RD4 — GPIO RD4 |
| Chân 59 | RD5 — GPIO RD5 |
| Chân 60 | RD6 — GPIO RD6 |
| Chân 61 | RD7 — GPIO RD7 |
| Chân 62 | RD8 — GPIO RD8 |
| Chân 63 | RD9 — GPIO RD9 |
| Chân 64 | RD10 — GPIO RD10 |
| Chân 65 | RD11 — GPIO RD11 |
| Chân 66 | RD12 — GPIO RD12 |
| Chân 67 | RD13 — GPIO RD13 |
| Chân 68 | RD14 — GPIO RD14 |
| Chân 69 | RD15 — GPIO RD15 |
| Chân 70 | VSS — Ground |
| Chân 71 | RE0 — GPIO RE0 / AERXERR |
| Chân 72 | RE1 — GPIO RE1 / AERXCLK |
| Chân 73 | RE2 — GPIO RE2 / AERXDV |
| Chân 74 | RE3 — GPIO RE3 / AERXRXD0 |
| Chân 75 | RE4 — GPIO RE4 / AERXRXD1 |
| Chân 76 | RE5 — GPIO RE5 / AETXEN |
| Chân 77 | RE6 — GPIO RE6 / AETXCLK |
| Chân 78 | RE7 — GPIO RE7 / AETXD0 |
| Chân 79 | RE8 — GPIO RE8 / AETXD1 |
| Chân 80 | RE9 — GPIO RE9 |
| Chân 81 | RF0 — GPIO RF0 / C1RX |
| Chân 82 | RF1 — GPIO RF1 / C1TX |
| Chân 83 | RF2 — GPIO RF2 / C2RX |
| Chân 84 | RF3 — GPIO RF3 / C2TX |
| Chân 85 | RF4 — GPIO RF4 / USBID |
| Chân 86 | RF5 — GPIO RF5 / USBVBUS |
| Chân 87 | RF6 — GPIO RF6 |
| Chân 88 | RF7 — GPIO RF7 |
| Chân 89 | RF8 — GPIO RF8 |
| Chân 90 | RF9 — GPIO RF9 |
| Chân 91 | RG0 — GPIO RG0 |
| Chân 92 | RG1 — GPIO RG1 |
| Chân 93 | RG6 — GPIO RG6 / SDA2 |
| Chân 94 | RG7 — GPIO RG7 / SCL2 |
| Chân 95 | RG8 — GPIO RG8 / SDA1 |
| Chân 96 | RG9 — GPIO RG9 / SCL1 |
| Chân 97 | RG10 — GPIO RG10 / SDA3 |
| Chân 98 | RG11 — GPIO RG11 / SCL3 |
| Chân 99 | RG12 — GPIO RG12 |
| Chân 100 | RG13 — GPIO RG13 |
Ứng dụng tiêu biểu
PIC32MZ0512EFF100T-E/GJX phù hợp cho 7 Áp dụngs: Industrial IoT Edge Gateway, Automotive Body and Gateway ECU, Human-Machine Interface (HMI) Panel, BLDC / PMSM Motor Control, USB-Connected Data Acquisition Module, Embedded Connectivity Router, Portable Medical Monitoring Device.
Industrial IoT Edge Gateway
The PIC32MZ0512EFF100T-E/GJX fits industrial IoT edge gateways because its 200 MHz MIPS M-class core delivers 330 DMIPS - enough to run an embedded TCP/IP stack alongside TLS, MQTT-SN, and OPC-UA Pub/Sub without offloading to a separate network processor. The integrated 10/100 Ethernet MAC, dual CAN 2.0B controllers, and 9 UART channels support simultaneous industrial fieldbus (Modbus RTU, CANopen, RS-485) and uplink Ethernet connectivity. The 512 KB dual-panel Flash enables A/B firmware update for unattended remote devices, where roll-back on a failed update is mandatory. AEC-Q100 qualification permits deployment in factory-cabinet environments with extended thermal stress.
Được đề xuất
Automotive Body and Gateway ECU
The PIC32MZ0512EFF100T-E/GJX is well-suited to automotive body and gateway ECUs because it is AEC-Q100 qualified and pairs a 32-bit 200 MHz core with hardware FPU, enough compute headroom for body-control message routing, LIN/CAN gateway translation, and basic diagnostic services (UDS over CAN). The dual CAN 2.0B modules can be bridged with the Ethernet MAC to form a vehicle-network gateway aggregating sensor data for central compute. 53 GPIO and 6 ADC with 1 MSPS sampling support direct wiring to body actuators and analog sensors. E-grade temperature range covers cabin and underhood near-engine placements.
Được đề xuất
Human-Machine Interface (HMI) Panel
The PIC32MZ0512EFF100T-E/GJX serves HMI panels well because its Parallel Master Port (PMP) directly drives TFT LCD controllers and external graphics memory while the FPU accelerates vector math for touch-gesture smoothing and animated icons. 512 KB Flash accommodates LVGL or emWin graphics libraries, and 128 KB SRAM holds frame buffers and partial-image assets. Hi-Speed USB OTG allows firmware updates from a USB stick in field service scenarios, and the 12-bit 1 MSPS ADC supports touch-screen and ambient-light sensing without a separate AFE. Industrial-grade variants exist for factory-floor HMIs.
Được đề xuất
BLDC / PMSM Motor Control
The PIC32MZ0512EFF100T-E/GJX targets BLDC and PMSM motor control because its single-cycle MAC and IEEE 754 FPU deliver the throughput required for field-oriented control (FOC) loops at 20-50 kHz PWM rates while leaving headroom for speed/torque estimators. The 6 ADC with 12-bit 1 MSPS conversion enables simultaneous phase-current sampling without external analog front ends, and the high-resolution PWM peripheral drives the three-phase inverter directly. 512 KB Flash and 128 KB SRAM hold motor parameters and adaptive control tables. AEC-Q100 qualification supports e-mobility applications.
Được đề xuất
USB-Connected Data Acquisition Module
The PIC32MZ0512EFF100T-E/GJX fits USB-connected data acquisition because its Hi-Speed USB 2.0 OTG controller supports 480 Mbps transfer rates - sufficient for streaming multi-channel 12-bit ADC data to a host PC at tens of kSPS without buffering delays. 128 KB SRAM doubles as a sample FIFO, while 512 KB Flash stores calibration tables and command parsers. 4 SPI and 4 I2C controllers allow daisy-chaining external sensors (accelerometers, thermocouples via ADC) without extra logic. AEC-Q100 grade supports in-vehicle measurement and calibration tools.
Được đề xuất
Embedded Connectivity Router
The PIC32MZ0512EFF100T-E/GJX fits small-form-factor embedded routers because it integrates Ethernet MAC, USB device, and 9 UARTs into a single chip - sufficient to bridge an LTE modem (over USB), a local Ethernet network, and multiple serial sensor buses without an external host CPU. The 200 MHz MIPS core runs lwIP or a lightweight TCP/IP stack with NAT, while dual-panel Flash supports fail-safe firmware updates critical for remote routers. AEC-Q100 grade covers industrial-cabinet and roadside deployments. The 100-pin TFBGA minimizes PCB area versus QFP alternatives.
Được đề xuất
Portable Medical Monitoring Device
The PIC32MZ0512EFF100T-E/GJX supports portable medical monitoring where its 200 MHz DSP-extended core executes signal-processing pipelines (FFT, filtering, feature extraction) for ECG, SpO2, or pulse-oximetry signals. The 12-bit 1 MSPS ADC samples analog front-end channels directly, while 128 KB SRAM buffers raw waveforms before feature extraction. The FPU accelerates 32-bit floating-point math libraries used in clinical-grade algorithms. AEC-Q100-style environmental robustness and low 2.3V-3.6V supply support battery-powered designs. Designers should still validate FDA/IEC 62304 compliance for clinical use.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ0512EFF100T-E/GJX — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ0512EFF100-E/GJX | PIC32MZ0512EFF100-I/GJX | PIC32MZ0512EFE100T-E/GJX | PIC32MZ0512EFE100T-I/GJX | PIC32MZ0512EFE100-E/GJX | PIC32MZ0512EFK100T-E/GJX |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) | 100-pin TFBGA (7x7 mm, GJX) |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Crypto Engine | No | No | No | Yes (AES/SHA/RNG) | Yes (AES/SHA/RNG) | Yes (AES/SHA/RNG) | Yes + KGC |
| Temperature Grade | E (Extended) | E (Extended) | I (Industrial -40C to +85C) | E (Extended) | I (Industrial) | E (Extended) | E (Extended) |
| Packaging Form | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tray | Tape & Reel |
Bảo phân biệt quan trọng
- Dual-panel Flash for fail-safe live firmware update (vsPIC32MZ0512EFF100-E/GJX (tray variant))
- Extended (E) temperature grade (vsPIC32MZ0512EFF100-I/GJX (industrial grade))
- No Crypto engine for cost-optimized designs (vsPIC32MZ0512EFE100T-E/GJX (with Crypto))
- 512 KB Flash for compact firmware (vsPIC32MZ1024EFG100T-E/GJX (1024 KB))
Ghi chú thiết kế
The 100-ball TFBGA (7x7 mm) package has 0.65 mm ball pitch and requires NSMD (non-solder mask defined) pads on the PCB. Use micro-via fan-out (0.2 mm via-in-pad optional) and a 4-layer stackup with continuous ground plane beneath the BGA for signal integrity and thermal dissipation. According to Microchip package drawing guidance, a 0.3 mm solder mask opening with 0.45 mm copper pad yields a reliable BGA joint. Avoid placing tall components under the BGA footprint on the opposite side, as flex during assembly can crack the joints.
Place 100 nF X7R decoupling capacitors as close as possible to every VDD pin (typically 7-9 VDD balls distributed across the package). Add 4.7 uF bulk ceramic capacitors near the supply pins. The PIC32MZ EF core runs at 200 MHz and can produce high di/dt transients - a 4-layer PCB with dedicated power and ground planes reduces supply bounce. Estimated: at full 200 MHz core + peripherals, peak current draw can exceed 100 mA instantaneous; size the regulator accordingly.
Although the 100-ball TFBGA has limited heat-dissipation area (no exposed pad in this package variant), the PIC32MZ0512EFF100T-E/GJX typical active power is under 200 mW at 200 MHz, so passive cooling is normally sufficient. For continuous full-load operation in elevated ambient temperatures (>70C), provide thermal relief via internal power planes stitched through the BGA. Verify junction temperature against the E-grade ambient ceiling using the Microchip thermal model.
The integrated Hi-Speed USB 2.0 OTG requires matched 90-ohm differential routing on D+/D- with the trace length matched within 150 mil. Place the USB PHY termination components within 4 mm of the USB connector. For Ethernet RMII/MII, route the 50 MHz RMII clock with controlled impedance and length-match to the PHY. For CAN bus, use twisted-pair cabling with 120-ohm termination at both ends; the MCU's CAN TX/RX pins should connect through an external CAN transceiver.
Do not leave unused VDD pins floating - tie every VDD ball to 3.3V and every VSS ball to ground to prevent internal latch-up. The PIC32MZ EF ICSP programming pins (PGECx/PGEDx) must be accessible on the PCB for in-system programming; leaving them unconnected prevents field firmware updates. Ensure the RTCC oscillator (SOSC) is configured if the real-time clock calendar is needed, otherwise tie SOSC pins to ground or leave unconnected per datasheet guidance.
Thông tin tuân thủ
AEC-Q100 qualified for automotive (per datasheets.com listing); RoHS compliant; lead-free and halogen-free packaging per Microchip product family datasheet. The -E temperature grade extends beyond industrial -40C to +85C.
