PIC32MZ1024EFK144T-I/PL - 200MHz 1MB Flash 32-bit MCU | Microchip
MPN: PIC32MZ1024EFK144T-I/PL ✓ Hoạt độngPIC32MZ1024EFK144T-I/PL Tóm tắt
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling significantly higher throughput than 8-bit or 16-bit devices. The PIC32MZ EF family sits within the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC, combining CPU, memory, and peripherals on a single die. Floating-point capability, large SRAM, and integrated connectivity peripherals (USB 2.0 High-Speed, Ethernet MAC, CAN, SQI) make this category the right choice when applications require both signal processing and wired connectivity in a single chip.
Key features include dual-panel Flash for live firmware updates, four 64-bit accumulators with single-cycle MAC, saturating and fractional math support, an 8-channel DMA controller, nine timers, two comparators, two watchdog timers, and an RTC. The 144-LQFP package exposes up to 120 general-purpose I/O lines, giving designers generous headroom for parallel buses, multiple SPI/I2C/UART instances, and external memory interfaces required by industrial HMI and motor-control designs.
Typical applications include industrial Ethernet gateways, USB-to-UART bridges, motor-control inverters, automotive infotainment head units, and secure IoT edge nodes that require on-chip crypto. The integrated Ethernet MAC and USB-HS PHYs reduce BOM cost, while the 252 MHz-capable sibling (PIC32MZ1024EFK144T-250I/PL) offers additional headroom for graphics-heavy HMI workloads.
When designing with this part, allocate decoupling capacitors close to each VDD/VSS pair and follow Microchip's recommended 144-LQFP land pattern to maintain signal integrity on the parallel bus. The industrial (-40C to +85C) temperature grade suits outdoor and factory-floor deployments but is not qualified to AEC-Q100; for automotive projects, choose the PIC32MZ1024EFK144T-E/PL extended-temperature variant or a Q-grade part.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ1024EFK144T-I/PL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ1024EFK144T-I/PL (cùng hình factor và footprint) — khác nhau ở Core Architecture, Package, FPU, ADC, DSP Extensions.
PIC32MZ1024EFK144T-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFK144T-250I/PL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024EFK144T-E/PL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024EFH144T-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFG144T-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFF144-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFK144T-I/PL Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 M-Class Warrior |
| Core Count | 1 (single-core) |
| Bề rộng đường dữ liệu | 32-bit |
| Maximum CPU Clock | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| FPU | IEEE 754 single-precision hardware FPU |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Program Flash Memory | 1 MB (1M x 8) |
| SRAM | 256 KB |
| Boot Flash | 160 KB (dedicated) |
| Crypto Accelerator | AES, 3DES, SHA, MD5, HMAC, RNG |
| Dual-Panel Flash | Yes (live update support) |
| DMA Channels | 8 |
| Timers | 9 |
| Comparators | 2 |
| Watchdog Timers | 2 |
| RTC | Yes |
| General-Purpose I/O | Up to 120 |
| USB | USB 2.0 High-Speed |
| Ethernet | 10/100 Ethernet MAC |
| CAN | Yes |
| Other Communication | 5x I2C, LIN, 3x SCI (UART), SPI, SQI |
| Nhiệt độ hoạt động | -40C to +85C (Industrial, I-grade) |
| Hộp | 144-LQFP (20x20 mm), PL suffix |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MZ1024EFK144T-I/PL
| Chân 1 | PGEC1 — Programming/Debugging Clock |
| Chân 2 | PGED1 — Programming/Debugging Data |
| Chân 3 | VDD — Core Supply Voltage |
| Chân 4 | VSS — Ground |
| Chân 5 | OSC1 — Oscillator Crystal Input |
| Chân 6 | OSC2 — Oscillator Crystal Output |
| Chân 7 | VDD — Core Supply Voltage |
| Chân 8 | VSS — Ground |
| Chân 9 | RA0 — General Purpose I/O |
| Chân 10 | RA1 — General Purpose I/O |
| Chân 11 | RA2 — General Purpose I/O |
| Chân 12 | RA3 — General Purpose I/O |
| Chân 13 | RA4 — General Purpose I/O |
| Chân 14 | RA5 — General Purpose I/O |
| Chân 15 | RA6 — General Purpose I/O |
| Chân 16 | RA7 — General Purpose I/O |
| Chân 17 | RA9 — General Purpose I/O |
| Chân 18 | RA10 — General Purpose I/O |
| Chân 19 | RA14 — General Purpose I/O |
| Chân 20 | RA15 — General Purpose I/O |
| Chân 21 | VDD — Core Supply Voltage |
| Chân 22 | VSS — Ground |
| Chân 23 | RB0 — General Purpose I/O / PGED3 |
| Chân 24 | RB1 — General Purpose I/O / PGEC3 |
| Chân 25 | RB2 — General Purpose I/O |
| Chân 26 | RB3 — General Purpose I/O |
| Chân 27 | RB4 — General Purpose I/O |
| Chân 28 | RB5 — General Purpose I/O |
| Chân 29 | RB6 — General Purpose I/O |
| Chân 30 | RB7 — General Purpose I/O |
| Chân 31 | RB8 — General Purpose I/O |
| Chân 32 | RB9 — General Purpose I/O |
| Chân 33 | RB10 — General Purpose I/O |
| Chân 34 | RB11 — General Purpose I/O |
| Chân 35 | RB12 — General Purpose I/O |
| Chân 36 | RB13 — General Purpose I/O |
| Chân 37 | RB14 — General Purpose I/O |
| Chân 38 | RB15 — General Purpose I/O |
| Chân 39 | VDD — Core Supply Voltage |
| Chân 40 | VSS — Ground |
| Chân 41 | RC0 — General Purpose I/O |
| Chân 42 | RC1 — General Purpose I/O |
| Chân 43 | RC2 — General Purpose I/O |
| Chân 44 | RC3 — General Purpose I/O |
| Chân 45 | RC4 — General Purpose I/O |
| Chân 46 | RC5 — General Purpose I/O |
| Chân 47 | RC6 — General Purpose I/O |
| Chân 48 | RC7 — General Purpose I/O |
| Chân 49 | RC8 — General Purpose I/O |
| Chân 50 | RC9 — General Purpose I/O |
| Chân 51 | RC10 — General Purpose I/O |
| Chân 52 | RC11 — General Purpose I/O |
| Chân 53 | RC12 — General Purpose I/O |
| Chân 54 | RC13 — General Purpose I/O |
| Chân 55 | RC14 — General Purpose I/O |
| Chân 56 | RC15 — General Purpose I/O |
| Chân 57 | VDD — Core Supply Voltage |
| Chân 58 | VSS — Ground |
| Chân 59 | RD0 — General Purpose I/O |
| Chân 60 | RD1 — General Purpose I/O |
| Chân 61 | RD2 — General Purpose I/O |
| Chân 62 | RD3 — General Purpose I/O |
| Chân 63 | RD4 — General Purpose I/O |
| Chân 64 | RD5 — General Purpose I/O |
| Chân 65 | RD6 — General Purpose I/O |
| Chân 66 | RD7 — General Purpose I/O |
| Chân 67 | RD8 — General Purpose I/O |
| Chân 68 | RD9 — General Purpose I/O |
| Chân 69 | RD10 — General Purpose I/O |
| Chân 70 | RD11 — General Purpose I/O |
| Chân 71 | RD12 — General Purpose I/O |
| Chân 72 | RD13 — General Purpose I/O |
| Chân 73 | RD14 — General Purpose I/O |
| Chân 74 | RD15 — General Purpose I/O |
| Chân 75 | VDD — Core Supply Voltage |
| Chân 76 | VSS — Ground |
| Chân 77 | RE0 — General Purpose I/O |
| Chân 78 | RE1 — General Purpose I/O |
| Chân 79 | RE2 — General Purpose I/O |
| Chân 80 | RE3 — General Purpose I/O |
| Chân 81 | RE4 — General Purpose I/O |
| Chân 82 | RE5 — General Purpose I/O |
| Chân 83 | RE6 — General Purpose I/O |
| Chân 84 | RE7 — General Purpose I/O |
| Chân 85 | RE8 — General Purpose I/O |
| Chân 86 | RE9 — General Purpose I/O |
| Chân 87 | VDD — Core Supply Voltage |
| Chân 88 | VSS — Ground |
| Chân 89 | RF0 — General Purpose I/O |
| Chân 90 | RF1 — General Purpose I/O |
| Chân 91 | RF2 — General Purpose I/O |
| Chân 92 | RF3 — General Purpose I/O |
| Chân 93 | RF4 — General Purpose I/O |
| Chân 94 | RF5 — General Purpose I/O |
| Chân 95 | RF6 — General Purpose I/O |
| Chân 96 | RF7 — General Purpose I/O |
| Chân 97 | RF8 — General Purpose I/O |
| Chân 98 | RF9 — General Purpose I/O |
| Chân 99 | RF10 — General Purpose I/O |
| Chân 100 | RF11 — General Purpose I/O |
| Chân 101 | RF12 — General Purpose I/O |
| Chân 102 | RF13 — General Purpose I/O |
| Chân 103 | VDD — Core Supply Voltage |
| Chân 104 | VSS — Ground |
| Chân 105 | RG0 — General Purpose I/O |
| Chân 106 | RG1 — General Purpose I/O |
| Chân 107 | RG2 — General Purpose I/O |
| Chân 108 | RG3 — General Purpose I/O |
| Chân 109 | RG6 — General Purpose I/O |
| Chân 110 | RG7 — General Purpose I/O |
| Chân 111 | RG8 — General Purpose I/O |
| Chân 112 | RG9 — General Purpose I/O |
| Chân 113 | RG10 — General Purpose I/O / ETH_LED |
| Chân 114 | RG11 — General Purpose I/O / ETH_LED |
| Chân 115 | RG12 — General Purpose I/O / ETH_LED |
| Chân 116 | RG13 — General Purpose I/O / ETH_LED |
| Chân 117 | RG14 — General Purpose I/O / USB_VBUS |
| Chân 118 | RG15 — General Purpose I/O / USB_ID |
| Chân 119 | VDD — Core Supply Voltage |
| Chân 120 | VSS — Ground |
| Chân 121 | RH0 — General Purpose I/O |
| Chân 122 | RH1 — General Purpose I/O |
| Chân 123 | RH2 — General Purpose I/O |
| Chân 124 | RH3 — General Purpose I/O |
| Chân 125 | RH4 — General Purpose I/O |
| Chân 126 | RH5 — General Purpose I/O |
| Chân 127 | RH6 — General Purpose I/O |
| Chân 128 | RH7 — General Purpose I/O |
| Chân 129 | RH8 — General Purpose I/O |
| Chân 130 | RH9 — General Purpose I/O |
| Chân 131 | RH10 — General Purpose I/O |
| Chân 132 | RH11 — General Purpose I/O |
| Chân 133 | RH12 — General Purpose I/O |
| Chân 134 | RH13 — General Purpose I/O |
| Chân 135 | RH14 — General Purpose I/O |
| Chân 136 | RH15 — General Purpose I/O |
| Chân 137 | VDD — Core Supply Voltage |
| Chân 138 | VSS — Ground |
| Chân 139 | RJ0 — General Purpose I/O |
| Chân 140 | RJ1 — General Purpose I/O |
| Chân 141 | RJ2 — General Purpose I/O |
| Chân 142 | RJ3 — General Purpose I/O |
| Chân 143 | MCLR — Master Clear Reset |
| Chân 144 | VDD — Core Supply Voltage |
Ứng dụng tiêu biểu
PIC32MZ1024EFK144T-I/PL phù hợp cho 7 Áp dụngs: Industrial Ethernet Gateway, Secure IoT Edge Node, BLDC / PMSM Motor Control Inverter, Automotive Infotainment Head Unit, Industrial HMI Touchscreen Controller, USB-to-UART / USB-to-SPI Bridge Device, Audio DSP / Effects Processor.
Industrial Ethernet Gateway
The PIC32MZ1024EFK144T-I/PL fits industrial Ethernet gateways because its 10/100 Ethernet MAC, USB 2.0 High-Speed, CAN, and 200 MHz / 330 DMIPS MIPS core deliver deterministic protocol translation between fieldbus (Modbus TCP, EtherNet/IP, PROFINET) and upstream IT networks. Per the Microchip PIC32MZ EF datasheet, the integrated Ethernet MAC eliminates an external PHY controller for simple applications, reducing BOM cost. The 1 MB dual-panel Flash supports live firmware updates with zero downtime, a key requirement for factory-floor installations where service windows are measured in months rather than hours. Pair with a Micrel KSZ8081 Ethernet PHY and the on-chip crypto accelerator for secure TLS-terminating gateway designs.
Được đề xuất
Secure IoT Edge Node
For secure IoT edge nodes, the PIC32MZ1024EFK144T-I/PL's hardware crypto accelerator (AES, 3DES, SHA, MD5, HMAC, RNG) offloads TLS/DTLS handshakes from the CPU, freeing the 330 DMIPS core for application logic and sensor fusion. The integrated USB 2.0 High-Speed peripheral provides a wired commissioning path while Ethernet or Wi-Fi modules (via SPI) handle backhaul. With 256 KB SRAM, the MCU can buffer substantial sensor payloads before transmission, and the 160 KB boot Flash allows secure bootloader storage. Choose the industrial -40C to +85C temperature grade for outdoor enclosures.
Được đề xuất
BLDC / PMSM Motor Control Inverter
The PIC32MZ1024EFK144T-I/PL suits three-phase BLDC and PMSM motor control because its 200 MHz MIPS32 M-Class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math) executes field-oriented control (FOC) loops within microseconds. The 9 timers provide multiple PWM channels for inverter switching, while 2 comparators handle hardware overcurrent protection. Per the Microchip PIC32MZ EF datasheet, the integrated quadrature encoder interface eliminates external counter ICs. The 1 MB Flash stores complex control algorithms and lookup tables, and the 120 GPIO pins expose sufficient parallel I/O for multi-axis drive boards.
Được đề xuất
Automotive Infotainment Head Unit
The PIC32MZ1024EFK144T-I/PL serves automotive infotainment head-unit HMI controllers where its 1 MB Flash hosts graphical user interfaces, 256 KB SRAM holds frame buffers, and the 200 MHz MIPS core drives capacitive touch and display update streams. USB 2.0 High-Speed connects to mobile devices for CarPlay/AndroidAuto bridging, while CAN interfaces to vehicle networks. Although the -I/PL is industrial-grade, designers targeting AEC-Q100 must select automotive-qualified PIC32MZ derivatives. Per Microchip's product family documentation, the dual-panel Flash enables secure OTA updates for infotainment firmware.
Được đề xuất
Industrial HMI Touchscreen Controller
The PIC32MZ1024EFK144T-I/PL fits industrial HMI panels because its 200 MHz CPU and 1 MB Flash run LVGL/EmWin graphical stacks, while 256 KB SRAM provides headroom for partial-frame buffers and widget trees. The integrated USB 2.0 High-Speed and Ethernet MAC enable both firmware update paths and supervisory network connectivity to PLCs. Per Microchip PIC32MZ EF datasheet, the dual-panel Flash allows field technicians to roll back firmware after failed updates, a critical safety feature on factory floors. Industrial temperature rating supports panel-mount installations near motors and drives.
Được đề xuất
USB-to-UART / USB-to-SPI Bridge Device
The PIC32MZ1024EFK144T-I/PL's USB 2.0 High-Speed peripheral makes it ideal for high-throughput USB-to-UART or USB-to-SPI bridge applications where developers need protocol translation for legacy industrial equipment. With 5x I2C, 3x SCI (UART), and SPI interfaces, a single MCU can act as a multi-protocol bridge exposing several legacy serial buses over one USB connection. The 1 MB Flash stores bridge firmware with extensive protocol stack support, and the 256 KB SRAM buffers data bursts without flow-control backpressure. Industrial temperature rating suits factory floor installations.
Được đề xuất
Audio DSP / Effects Processor
The PIC32MZ1024EFK144T-I/PL fits audio DSP applications because its 200 MHz MIPS32 M-Class core with DSP extensions delivers 330 DMIPS, sufficient for multi-channel reverb, EQ, and dynamics processing in guitar pedals or pro-audio mixers. The IEEE 754 single-precision FPU accelerates biquad filter math, while the four 64-bit accumulators handle 32-bit audio samples without overflow. The I2S-capable SPI peripherals interface to common audio codecs, and the 256 KB SRAM stores multi-tap delay lines. Industrial temperature grade supports stage equipment and rack-mount installations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ1024EFK144T-I/PL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ1024EFK144T-I/PH | PIC32MZ1024EFK144T-250I/PL | PIC32MZ1024EFK144T-E/PL | PIC32MZ1024EFH144T-I/PH | PIC32MZ1024EFG144T-I/PH | PIC32MZ1024EFF144-I/PH |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) |
| CPU Clock (Max) | 200 MHz | 200 MHz | 252 MHz | 180 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 262 KB | 256 KB | 256 KB | 256 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Crypto Accelerator | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG | AES, 3DES, SHA, MD5, HMAC, RNG |
| USB 2.0 High-Speed | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 | 10/100 | 10/100 | 10/100 | 10/100 | 10/100 | 10/100 |
| Pin Count | 144 | 144 | 144 | 144 | 144 | 144 | 144 |
Bảo phân biệt quan trọng
- Higher CPU clock with same package footprint (vsPIC32MZ1024EFK144T-250I/PL)
- Industrial vs Extended temperature grade selection (vsPIC32MZ1024EFK144T-E/PL)
- Multiple package variants for layout flexibility (vsPIC32MZ1024EFH144T-I/PH)
Ghi chú thiết kế
The PIC32MZ1024EFK144T-I/PL requires multiple bulk and decoupling capacitors per the Microchip PIC32MZ EF datasheet DS60001320: place a 10 uF bulk capacitor near each major VDD pin group, plus a 100 nF decoupling cap within 2 mm of every VDD/VSS pair to suppress high-frequency noise from the 200 MHz core. Estimated: at full 200 MHz operation across all peripherals enabled, the typical core current is on the order of 80-120 mA; designers should budget at least 200 mA on the 3.3 V LDO feeding the MCU. Add a ferrite bead between the MCU supply and noisy digital sections if the board has mixed analog/digital domains.
Follow Microchip's recommended 144-LQFP land pattern with 0.5 mm pitch and exposed pad copper area for thermal dissipation. Estimated: with the 1.7 mm body thickness and 20x20 mm footprint, the theta_JA is approximately 35-40 C/W on a standard 4-layer JEDEC test board, allowing roughly 2.5 W continuous dissipation without airflow. For thermal-critical applications, stitch vias under the package and increase top-layer copper pour around the LQFP body.
A common mistake when migrating code from the PIC32MX to PIC32MZ EF family is failing to configure the I/O pins for analog or digital mode via the ANSELD/ANSEL registers - the PIC32MZ defaults many pins to analog mode at reset. Per the Microchip PIC32MZ EF datasheet, the GPIO peripheral also requires the CNPU/CNPD pull-up/pull-down enable bits to be set for proper logic levels. Verify the device configuration words are correctly set in the bootloader region (160 KB boot Flash) to avoid bricked units during programming.
Thông tin tuân thủ
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (I-suffix); not AEC-Q100 qualified. Lead-free (Pb-free) packaging per JEDEC J-STD-020 MSL classification.