SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon
MPN: SAL-TC277TP-64F200NDC ✓ Hoạt độngSAL-TC277TP-64F200NDC Tóm tắt
An AURIX TC2 microcontroller is a multicore automotive-grade MCU built on Infineon's TriCore architecture, which unifies microcontroller, DSP, and RISC capabilities in a single processor core. Within the power management and embedded control hierarchy, it sits at the top of real-time safety MCUs, classified as a 32-bit multicore microcontroller for ISO 26262 ASIL-D systems.
Key features include the innovative multicore architecture with up to three independent 32-bit TriCore CPUs engineered to meet the highest safety standards, a powerful Generic Timer Module (GTM) for precise PWM generation, and an integrated Ethernet controller for high-speed in-vehicle networking. Four CAN nodes support legacy automotive bus communication, and lockstep execution with memory protection units enables safe task isolation.
The TC27xT family is designed to reduce system complexity and power consumption while achieving best-in-class real-time performance. Task partitioning across the three cores allows safety-critical functions to run independently from non-critical application software, improving system reliability and reducing certification effort for ASIL-D software development.
Typical applications include automotive engine control units (ECUs), transmission control, battery management systems (BMS), electric power steering, and advanced driver assistance systems (ADAS). The Ethernet interface supports vehicle-to-everything (V2X) communication and over-the-air (OTA) software updates, while long-term availability makes it a preferred choice for automotive OEMs and tier-1 suppliers.
When designing with this MCU, pay close attention to power supply sequencing between the 3.3V I/O and 1.3V core rails, and use proper decoupling and PCB layout practices to minimize noise on the GTM and Ethernet interfaces.
Bộ thay thế dễ dàng lắp đặt cho SAL-TC277TP-64F200NDC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SAL-TC277TP-64F200NDC (cùng hình factor và footprint) — khác nhau ở CAN Nodes, Ethernet, Max Clock Frequency, Package, SRAM (incl. Cache).
SAK-TC277TP-64F200N DC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TC277TP64F200NDCLXUMA1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAK-TC277TP-64F200S DC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAL-TC277TP-64F200S-CA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAK-TC297TP-128F300SBCKXUMA1
⚡ Đồng góiLiên hệ để biết giá
Xem tài liệu →SAL-TC277TP-64F200NDC Tỷ lệ tối đa & tính chất điện
| Core Architecture | 3x 32-bit TriCore CPUs (multicore) |
| Max Clock Frequency | 200 MHz |
| Program Memory | 4 MB Flash |
| SRAM (incl. Cache) | 472 KB (nominal) |
| CAN Nodes | 4 |
| Ethernet | Yes (integrated Ethernet controller) |
| Timer Module | Generic Timer Module (GTM) |
| Functional Safety | ISO 26262 compliant |
| Hộp | PG-LFBGA-292-6 (292-ball LFBGA, square) |
| Terminal Form | Ball (BGA) |
| Number of Terminals | 292 |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân SAL-TC277TP-64F200NDC pg-lfbga-292-6 (292-ball lfbga, square)
Cấu hình chân cho SAL-TC277TP-64F200NDC (pg-lfbga-292-6 (292-ball lfbga, square) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho SAL-TC277TP-64F200NDC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SAL-TC277TP-64F200NDC phù hợp cho 6 Áp dụngs: Engine Control Unit (ECU), Battery Management System (BMS), Electric Power Steering (EPS), Transmission Control, ADAS Domain Controller Support, Industrial Motor Control and Robotics.
Engine Control Unit (ECU)
The TC277TP's three 200 MHz TriCore cores and 4 MB Flash handle crank-angle-synchronous combustion control, knock correction, and OBD monitoring in parallel with safety task isolation required for ASIL-D powertrain systems. The Generic Timer Module (GTM) generates high-resolution injection and ignition PWM signals in hardware, offloading CPU load. Four CAN nodes interface with the vehicle network while lockstep monitoring detects faults in real time.
Được đề xuất
Battery Management System (BMS)
In EV battery management, the TC277TP executes state-of-charge and state-of-health algorithms across its three cores while dedicating lockstep execution to safety-relevant overvoltage and thermal supervision. Its 4 MB Flash stores extensive calibration data and diagnostic logs, and the Ethernet controller links battery controllers in ring topologies for domain-controlled architectures. ISO 26262 compliance reduces the OEM's safety certification burden at vehicle level.
Được đề xuất
Electric Power Steering (EPS)
EPS demands sub-millisecond torque-control loop closure with redundant fault detection - precisely what the TC277TP delivers with its GTM-based PWM generation for the three-phase motor bridge and lockstep cores supervising torque sensor processing. The 200 MHz cores run field-oriented control and assist-curve computation concurrently. Four CAN nodes support chassis-domain communication with gateway redundancy required by steering safety goals.
Được đề xuất
Transmission Control
Automatic and dual-clutch transmissions require simultaneous pressure, clutch, and gear-position control with strong functional safety. The TC277TP's parallel cores separate shift-strategy computation from solenoid PWM generation and diagnostic monitoring, while 4 MB Flash holds multiple shift-map calibration sets for OTA-updatable driving profiles. The 150C-capable N-grade device suits mounting locations near the transmission housing.
Được đề xuất
ADAS Domain Controller Support
As a chassis-adjacent safety MCU, the TC277TP complements high-performance ADAS SoCs by handling deterministic actuator control, sensor-fusion safety monitoring, and fallback strategies. Its Ethernet controller connects to camera/radar front ends and the domain gateway, while the TriCore cores execute the safety monitor path mandated by ISO 26262 for ADAS functions. The GTM provides hardware-timed sensor triggering with microsecond precision.
Được đề xuất
Industrial Motor Control and Robotics
Beyond automotive, the TC277TP's DSP-capable TriCore architecture and GTM execute multi-axis servo control with functional-safety stop functions (STO support) required by industrial machinery standards. Three 200 MHz cores run current loops, trajectory planning, and fieldbus stacks concurrently, and the Ethernet controller connects to PROFINET/ EtherCAT-adjacent industrial networks. The 292-ball LFBGA supports high-density, vibration-tolerant industrial drive designs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SAL-TC277TP-64F200NDC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SAK-TC277TP-64F200N DC | SAK-TC277TP-64F200S DC | SAK-TC297TP-128F300SBCKXUMA1 |
|---|---|---|---|---|
| Package | PG-LFBGA-292-6 | PG-LFBGA-292-6 - same | PG-LFBGA-292-6 - same | PG-LFBGA-292 - same footprint |
| Brand | Infineon | Infineon | Infineon | Infineon |
| CPU Cores | 3x 32-bit TriCore | 3x 32-bit TriCore | 3x 32-bit TriCore | 3x 32-bit TriCore |
| Max Clock Frequency | 200 MHz | 200 MHz | 200 MHz | 300 MHz |
| Flash Memory | 4 MB | 4 MB | 4 MB | 16 MB |
| Functional Safety | ISO 26262 compliant | ISO 26262 compliant | ISO 26262 compliant | ISO 26262 compliant (AURIX family) |
Bảo phân biệt quan trọng
- Extended +150C ambient rating (vsSAK-TC277TP-64F200S DC)
- High memory density in TC2 family (vsSAK-TC277TP-64F200N DC)
- Same-footprint upgrade path (vsSAK-TC297TP-128F300SBCKXUMA1)
Ghi chú thiết kế
The TC277TP requires multiple supply rails (3.3V I/O and approximately 1.3V core). Implement proper power-up sequencing so core and I/O rails satisfy datasheet ramp requirements, and add a supervisor/reset IC on the reset line. Each supply pin pair should be locally decoupled with 100 nF ceramics placed within 2 mm of the ball via, plus bulk capacitance near the package.
The 292-ball LFBGA requires a via-in-pad or dog-bone escape fan-out on 0.8 mm/1.0 mm ball pitch. Follow Infineon's PG-LFBGA-292-6 footprint data exactly: non-solder-mask-defined pads and symmetry to avoid tombstoning during reflow. Inspect with X-ray or AOI after assembly - hidden BGA solder defects are the leading cause of field failures on this class of package.
Do not mix S-grade (+125C) and N-grade (+150C) variants in the same ECU BOM without re-qualifying thermal margins - the temperature difference between SAL-TC277TP-64F200N DC and SAK-TC277TP-64F200S DC is the primary spec divergence. Also verify the ordering-code routing: LXUMA1/CKXUMA1 suffixes denote packaging/routing variants, not different silicon.
Thông tin tuân thủ
Device is ISO 26262 compliant per Infineon and automotive-qualified (AURIX family). RoHS/REACH/lead-free status not stated in provided data - verify on Infineon product page.
