SAL-TC277TP-64F200NDC - AURIX TC27xT 200MHz MCU | Infineon
料号： SAL-TC277TP-64F200NDC ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $49.95 | $49.95 |
| 10 | $47.45 | $474.50 |
| 100 | $44.96 | $4,496.00 |
| 500 | $42.46 | $21,230.00 |
| 1,000 | $39.96 | $39,960.00 |
SAL-TC277TP-64F200NDC 概述
An AURIX TC2 microcontroller is a multicore automotive-grade MCU built on Infineon's TriCore architecture, which unifies microcontroller, DSP, and RISC capabilities in a single processor core. Within the power management and embedded control hierarchy, it sits at the top of real-time safety MCUs, classified as a 32-bit multicore microcontroller for ISO 26262 ASIL-D systems.
Key features include the innovative multicore architecture with up to three independent 32-bit TriCore CPUs engineered to meet the highest safety standards, a powerful Generic Timer Module (GTM) for precise PWM generation, and an integrated Ethernet controller for high-speed in-vehicle networking. Four CAN nodes support legacy automotive bus communication, and lockstep execution with memory protection units enables safe task isolation.
The TC27xT family is designed to reduce system complexity and power consumption while achieving best-in-class real-time performance. Task partitioning across the three cores allows safety-critical functions to run independently from non-critical application software, improving system reliability and reducing certification effort for ASIL-D software development.
Typical applications include automotive engine control units (ECUs), transmission control, battery management systems (BMS), electric power steering, and advanced driver assistance systems (ADAS). The Ethernet interface supports vehicle-to-everything (V2X) communication and over-the-air (OTA) software updates, while long-term availability makes it a preferred choice for automotive OEMs and tier-1 suppliers.
When designing with this MCU, pay close attention to power supply sequencing between the 3.3V I/O and 1.3V core rails, and use proper decoupling and PCB layout practices to minimize noise on the GTM and Ethernet interfaces.
直接替换替代料： SAL-TC277TP-64F200NDC ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： SAL-TC277TP-64F200NDC （相同外形与封装尺寸） ——差异在于 CAN Nodes, Ethernet, Max Clock Frequency, Package, SRAM (incl. Cache).
快速对比工具——选择替代料号进行并排对比：
SAK-TC277TP-64F200N DC
✅ 直接替换📋 参考替代料（不在目录中）
TC277TP64F200NDCLXUMA1
✅ 直接替换📋 参考替代料（不在目录中）
SAK-TC277TP-64F200S DC
✅ 直接替换📋 参考替代料（不在目录中）
SAL-TC277TP-64F200S-CA
✅ 直接替换📋 参考替代料（不在目录中）
SAK-TC297TP-128F300SBCKXUMA1
⚡ 相同封装✓ 有现货
$29.6 / 个
查看数据手册 →SAL-TC277TP-64F200NDC 最大额定值与电气特性
| Core Architecture | 3x 32-bit TriCore CPUs (multicore) |
| Max Clock Frequency | 200 MHz |
| Program Memory | 4 MB Flash |
| SRAM (incl. Cache) | 472 KB (nominal) |
| CAN Nodes | 4 |
| Ethernet | Yes (integrated Ethernet controller) |
| Timer Module | Generic Timer Module (GTM) |
| Functional Safety | ISO 26262 compliant |
| 封装 | PG-LFBGA-292-6 (292-ball LFBGA, square) |
| Terminal Form | Ball (BGA) |
| Number of Terminals | 292 |
| 安装类型 | Surface Mount |
SAL-TC277TP-64F200NDC pg-lfbga-292-6 (292-ball lfbga, square) 引脚配置指南
SAL-TC277TP-64F200NDC（pg-lfbga-292-6 (292-ball lfbga, square) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： SAL-TC277TP-64F200NDC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SAL-TC277TP-64F200NDC 适用于 6 应用s: Engine Control Unit (ECU), Battery Management System (BMS), Electric Power Steering (EPS), Transmission Control, ADAS Domain Controller Support, Industrial Motor Control and Robotics.
Engine Control Unit (ECU)
The TC277TP's three 200 MHz TriCore cores and 4 MB Flash handle crank-angle-synchronous combustion control, knock correction, and OBD monitoring in parallel with safety task isolation required for ASIL-D powertrain systems. The Generic Timer Module (GTM) generates high-resolution injection and ignition PWM signals in hardware, offloading CPU load. Four CAN nodes interface with the vehicle network while lockstep monitoring detects faults in real time.
推荐
Battery Management System (BMS)
In EV battery management, the TC277TP executes state-of-charge and state-of-health algorithms across its three cores while dedicating lockstep execution to safety-relevant overvoltage and thermal supervision. Its 4 MB Flash stores extensive calibration data and diagnostic logs, and the Ethernet controller links battery controllers in ring topologies for domain-controlled architectures. ISO 26262 compliance reduces the OEM's safety certification burden at vehicle level.
推荐
Electric Power Steering (EPS)
EPS demands sub-millisecond torque-control loop closure with redundant fault detection - precisely what the TC277TP delivers with its GTM-based PWM generation for the three-phase motor bridge and lockstep cores supervising torque sensor processing. The 200 MHz cores run field-oriented control and assist-curve computation concurrently. Four CAN nodes support chassis-domain communication with gateway redundancy required by steering safety goals.
推荐
Transmission Control
Automatic and dual-clutch transmissions require simultaneous pressure, clutch, and gear-position control with strong functional safety. The TC277TP's parallel cores separate shift-strategy computation from solenoid PWM generation and diagnostic monitoring, while 4 MB Flash holds multiple shift-map calibration sets for OTA-updatable driving profiles. The 150C-capable N-grade device suits mounting locations near the transmission housing.
推荐
ADAS Domain Controller Support
As a chassis-adjacent safety MCU, the TC277TP complements high-performance ADAS SoCs by handling deterministic actuator control, sensor-fusion safety monitoring, and fallback strategies. Its Ethernet controller connects to camera/radar front ends and the domain gateway, while the TriCore cores execute the safety monitor path mandated by ISO 26262 for ADAS functions. The GTM provides hardware-timed sensor triggering with microsecond precision.
推荐
Industrial Motor Control and Robotics
Beyond automotive, the TC277TP's DSP-capable TriCore architecture and GTM execute multi-axis servo control with functional-safety stop functions (STO support) required by industrial machinery standards. Three 200 MHz cores run current loops, trajectory planning, and fieldbus stacks concurrently, and the Ethernet controller connects to PROFINET/ EtherCAT-adjacent industrial networks. The 292-ball LFBGA supports high-density, vibration-tolerant industrial drive designs.
推荐
推荐产品汇总
工程参考数据： SAL-TC277TP-64F200NDC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SAK-TC277TP-64F200N DC | SAK-TC277TP-64F200S DC | SAK-TC297TP-128F300SBCKXUMA1 |
|---|---|---|---|---|
| Package | PG-LFBGA-292-6 | PG-LFBGA-292-6 - same | PG-LFBGA-292-6 - same | PG-LFBGA-292 - same footprint |
| Brand | Infineon | Infineon | Infineon | Infineon |
| CPU Cores | 3x 32-bit TriCore | 3x 32-bit TriCore | 3x 32-bit TriCore | 3x 32-bit TriCore |
| Max Clock Frequency | 200 MHz | 200 MHz | 200 MHz | 300 MHz |
| Flash Memory | 4 MB | 4 MB | 4 MB | 16 MB |
| Functional Safety | ISO 26262 compliant | ISO 26262 compliant | ISO 26262 compliant | ISO 26262 compliant (AURIX family) |
关键差异点
- Extended +150C ambient rating （对比 SAK-TC277TP-64F200S DC)
- High memory density in TC2 family （对比 SAK-TC277TP-64F200N DC)
- Same-footprint upgrade path （对比 SAK-TC297TP-128F300SBCKXUMA1)
设计说明
The TC277TP requires multiple supply rails (3.3V I/O and approximately 1.3V core). Implement proper power-up sequencing so core and I/O rails satisfy datasheet ramp requirements, and add a supervisor/reset IC on the reset line. Each supply pin pair should be locally decoupled with 100 nF ceramics placed within 2 mm of the ball via, plus bulk capacitance near the package.
The 292-ball LFBGA requires a via-in-pad or dog-bone escape fan-out on 0.8 mm/1.0 mm ball pitch. Follow Infineon's PG-LFBGA-292-6 footprint data exactly: non-solder-mask-defined pads and symmetry to avoid tombstoning during reflow. Inspect with X-ray or AOI after assembly - hidden BGA solder defects are the leading cause of field failures on this class of package.
Do not mix S-grade (+125C) and N-grade (+150C) variants in the same ECU BOM without re-qualifying thermal margins - the temperature difference between SAL-TC277TP-64F200N DC and SAK-TC277TP-64F200S DC is the primary spec divergence. Also verify the ordering-code routing: LXUMA1/CKXUMA1 suffixes denote packaging/routing variants, not different silicon.
合规信息
Device is ISO 26262 compliant per Infineon and automotive-qualified (AURIX family). RoHS/REACH/lead-free status not stated in provided data - verify on Infineon product page.
