產品(46,000+)

MAX3241CAI+ - 3V-5.5V RS-232 Transceiver, 1Mbps | Analog Devices
MAX3241CAI+

MAX3241CAI+ - 3V-5.5V RS-232 Transceiver, 1Mbps | Analog Devices

The Analog Devices MAX3241CAI+ is a 3.0V to 5.5V low-power true RS-232 transceiver supporting data rates up to 1Mbps, packaged in a 28-pin SSOP (5.30 mm body width). The device integrates three line drivers and five line receivers in a single IC, with a dual charge-pump architecture that requires only four external 0.1uF capacitors, eliminating the need for a bipolar ±12V supply. A RS-232 transceiver is a type of line driver/receiver interface IC that converts logic-level (TTL/CMOS) signals to/from the bipolar ±5V to ±15V voltage swings required by the EIA/TIA-232-E standard. It belongs to the broader category of serial interface ICs (RS-232, RS-422, RS-485, UART transceivers), which sit between a microcontroller UART and the physical cable in point-to-point or multipoint data links. Charge-pump transceivers like the MAX3241 family simplify system design by generating the required transmitter output voltages internally from a single low-voltage rail. Key features include a 1Mbps guaranteed data rate (250kbps in the standard mode, up to 1Mbps with low-ESR capacitors), always-active extra receiver outputs for monitoring external peripherals, ±15kV ESD protection on transmitter outputs and receiver inputs (HBM), and an automatic shutdown mode that drops supply current to 1uA while keeping one receiver active. The always-on monitoring receivers (R1 and R2 extra outputs) make this part especially useful in portable and battery-powered designs that must wake the host on cable or peripheral activity. The MAX3241 uses a low-dropout transmitter output stage that maintains true RS-232-compliant output levels (±5V minimum) even when operating from a discharged battery, together with an internal dual charge pump that generates the positive and negative supplies from a single 3.0V to 5.5V rail. Four small 0.1uF external capacitors provide the pump energy storage, reducing BOM cost and board area versus ±12V solutions. Typical applications include battery-powered point-of-sale terminals, industrial handheld instrumentation, networking equipment (routers, switches), laptop and notebook serial ports, cellular phone data cables, and any embedded system requiring a TIA/EIA-232-E compliant UART link from a single low-voltage logic supply. When designing with this device, place the four 0.1uF charge-pump capacitors as close as possible to the IC pins and use a low-ESR ceramic type to achieve the 1Mbps data rate. Add bulk decoupling (0.1uF + 1uF) on VCC near the device to suppress supply noise. Verify that downstream receivers tolerate the MAX3241's ±5V minimum output swing if your cable is unusually long. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MAX3243CAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices
MAX3243CAI+G1Z

MAX3243CAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices

Analog Devices MAX3243CAI+G1Z is a 3-driver/5-receiver RS-232 interface transceiver designed for single-supply operation from 3 V to 5.5 V. It is offered in a 28-pin SSOP package and includes AutoShutdown power management, which reduces supply current to 1 uA when the receivers do not detect a valid signal level. The device also provides complementary always-active receiver channels for external monitoring and supports data rates up to 250 kbps. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3243 belongs to the broader interface IC hierarchy, where line drivers and receivers bridge modern digital systems with older RS-232 equipment. Its multi-channel arrangement supports equipment needing more drivers or receivers than a simple two-channel RS-232 implementation. The MAX3243 family includes integrated charge-pump circuitry for level translation, allowing operation from a single low-voltage supply rather than the traditional positive and negative RS-232 supplies. Low-power operation is important in portable equipment, industrial control systems, and instrument panels where an idle RS-232 port should not consume significant power. AutoShutdown provides automatic supply reduction when valid receiver activity is absent, supporting efficient power management without requiring a dedicated GPIO control signal. The MAX3243 is suitable for industrial control equipment, test and measurement instruments, data acquisition systems, security equipment, and service interfaces. Its always-active receiver channels can monitor external RS-232 activity even while the principal receiver channels are shut down, which is useful for detecting connection or activity status. The 28-pin SSOP package also supports compact board layouts in legacy and industrial communication products. When designing around the MAX3243CAI+G1Z, verify the 3 V to 5.5 V supply range, connector protection requirements, and the voltage levels present at each interface. RS-232 is a single-ended, unbalanced standard, so cable routing and grounding can affect signal integrity. Keep connector-side transient protection close to the connector and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. AutoShutdown behavior should also be checked against the system’s expected idle state and remote-device signaling. This page combines the family-level electrical characteristics, package information, sourcing context, drop-in alternatives, and practical RS-232 design guidance to support component selection and PCB implementation.

詢價 聯絡我們
MAX3243CAI+TG1Z - 3/5 RS-232 Transceiver | Analog Devices
MAX3243CAI+TG1Z

MAX3243CAI+TG1Z - 3/5 RS-232 Transceiver | Analog Devices

Analog Devices MAX3243CAI+TG1Z is a 3-driver/5-receiver RS-232 interface transceiver with a 28-pin SSOP package. It supports true +3 V to +5.5 V operation and uses AutoShutdown to reduce supply current to 1 µA when no valid receiver signal is detected. The device combines three RS-232 drivers, five RS-232 receivers, and a complementary always-active receiver for external monitoring. These characteristics place the MAX3243 in the interface IC hierarchy: RS-232 transceiver → serial interface IC → interface IC → semiconductor. It is intended for equipment that must translate between modern digital logic levels and RS-232 signal levels. The MAX3243 family uses Maxim’s AutoShutdown technology to lower operating power when the connected RS-232 link is inactive. A valid signal on a receiver input causes the supply and drivers to become active, while the absence of a valid signal allows the low-power state to be maintained. This behavior is particularly useful in battery-operated and intermittently connected portable equipment, where an idle serial transceiver could otherwise continue to consume unnecessary power. The operating range of +3 V to +5.5 V permits integration with both 3.3 V and 5 V systems. The 3/5 channel arrangement supports three outbound RS-232 drivers and five inbound receivers, while the additional always-active receiver provides complementary monitoring information. This makes the device appropriate for console links, instrumentation, industrial control interfaces, configuration ports, and embedded systems that exchange serial commands with external equipment. Compared with a purely unidirectional line-driver or receiver, the integrated transceiver reduces the component count and simplifies bidirectional RS-232 connections. The MAX3243CAI+TG1Z ordering code identifies a 28-SSOP package offered by Analog Devices/Maxim Integrated. Its integrated interface functionality supports compact designs where board area is important. Because RS-232 uses a single-ended signaling method referenced to ground, the complete circuit also depends on the external charge-pump capacitors, pass capacitors, protection elements, connector, and cable. Those surrounding components determine practical bus-range and signal-integrity behavior in the finished equipment. A robust implementation should place the required charge-pump capacitors close to their associated pins, connect the interface ground appropriately with the system ground, and provide the protection strategy required by the installation environment. Long or exposed cables can introduce electrostatic discharge, transients, and ground-offset problems that are not solved by the transceiver alone. Application review should therefore include the cable length, operating environment, logic levels, and whether the connected system requires hardware handshaking. This product page summarizes the verified manufacturer identity, channel configuration, supply range, shutdown behavior, package, and ordering code. It also organizes functional applications, design cautions, candidate replacements, and specification comparisons so that engineers can assess fit quickly while treating the MAX3243 datasheet as the governing technical document.

詢價 聯絡我們
MAX3243CDBG4 - 250kbps 3/5 RS-232 Transceiver | TI
MAX3243CDBG4

MAX3243CDBG4 - 250kbps 3/5 RS-232 Transceiver | TI

The Texas Instruments MAX3243CDBG4 is a 3-driver, 5-receiver RS-232 line-driver and receiver with a 250 kbps data rate, a 3 V to 5.5 V supply range, and ±15 kV HBM ESD protection. It is packaged in a 28-pin SSOP for compact serial-interface equipment. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3243 belongs to the RS-232 transceiver class, within interface ICs and broader semiconductor communication-interface devices. It supports asymmetric designs requiring three transmit channels and five receive channels, making it useful for multiport serial controllers, data acquisition equipment, and service interfaces. The three RS-232 drivers and five receivers operate from a single 3 V to 5.5 V supply. Its maximum signaling rate of 250 kbps supports conventional serial communication while providing useful margin for a broad range of industrial and embedded links. The ±15 kV human-body-model ESD rating is a significant handling advantage when an exposed connector places the interface close to cables, external equipment, or less controlled user-accessible ports. The MAX3243CDBG4 ordering code identifies the commercial-temperature, 28-pin SSOP configuration. The SSOP package offers a substantially smaller board footprint than a conventional 28-pin plastic DIP while remaining compatible with automated surface-mount assembly. Tube packaging is specified for this ordering option, allowing distributors and contract manufacturers to handle the components in standard production workflows. Typical applications include multichannel RS-232 test equipment, industrial controller service ports, serial adapters, instrumentation, embedded systems, and legacy peripheral interfaces. The three transmitters can drive three separate RS-232 outputs, while five receivers allow one controller to monitor five incoming signals without requiring five separate interface devices. This asymmetry can simplify system partitioning when a design has fewer outbound data paths than inbound control or status paths. Layout should keep the transceiver close to its connector and separate the protected communication interface from sensitive digital circuitry. Follow the pin-description table and recommended decoupling arrangement in the manufacturer datasheet. Check signal polarity and connector assignment for every RS-232 channel, and verify that the selected cable uses the correct DB9 or alternative connector convention rather than assuming a universal pinout. This product page combines manufacturer specifications, package information, validated drop-in alternatives, and application-focused design guidance. It is intended to accelerate component identification and board-level engineering while preserving the distinctions that matter when replacing a serial-interface IC.

詢價 聯絡我們
MAX3243CDBRG4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3243CDBRG4

MAX3243CDBRG4 - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243CDBRG4 is a 3- to 5.5-V multichannel RS-232 line driver and receiver rated for data rates up to 250 kbps, with ±15 kV ESD protection in a 28-pin SSOP package. It combines three drivers and three receivers, making it suitable for three-channel serial interfaces operating from either 3 V or 5 V supplies. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible levels. Within the interface hierarchy, the MAX3243 belongs to the RS-232 transceiver family, providing bidirectional signal conditioning between a host controller and external serial equipment. Its multichannel configuration reduces the number of external interface components required for multiport designs. Key operating characteristics include a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three driver channels, three receiver channels, and ±15 kV human-body-model ESD protection. These features make the device useful for industrial control systems, POS terminals, instrumentation, and embedded systems that connect legacy RS-232 equipment over cable lengths where transient electrical noise is likely. The MAX3243 is designed for single-ended RS-232 communication and supports both 3 V and 5 V system rails, allowing the same interface design to be used across different logic-voltage systems. Its integrated multichannel architecture simplifies board space compared with separate single-channel transceivers. ESD protection improves robustness at connector-facing pins, although designers must still use appropriate cable, grounding, and signal-integrity practices. Typical applications include industrial serial controllers, point-of-sale equipment, barcode and label printers, security systems, test equipment, and embedded data-acquisition systems. In each case, the three-channel arrangement can serve multiple serial ports while limiting the number of external line-driver and receiver assemblies. A key implementation consideration is that RS-232 uses unbalanced single-ended signaling and is not a direct substitute for differential RS-422 or RS-485. PCB routing should keep driver and receiver traces away from noisy switching nodes, while grounding and cable practices should follow the applicable RS-232 system requirements. This page combines the exact manufacturer specifications for the MAX3243CDBRG4 with package, sourcing, and engineering guidance. It also identifies same-footprint family alternatives and highlights the temperature-grade and lifecycle checks that should be completed before approving a replacement for an existing design.

詢價 聯絡我們
MAX3243CDW - 3-5.5V 250kbps RS-232 Transceiver | Texas Instruments
MAX3243CDW

MAX3243CDW - 3-5.5V 250kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3243CDW is a multichannel RS-232 line driver and receiver interface IC with a 3 V to 5.5 V supply range, data rate up to 250 kbps, and ±15 kV human-body-model ESD protection on the serial interface pins. The device is packaged in a 28-pin SOIC and combines three line drivers with five line receivers for full-duplex serial-interface designs. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into balanced, single-ended RS-232 line voltages and converts received line voltages back into logic levels. The MAX3243 belongs to the multi-channel transceiver class within the broader hierarchy of interface ICs, serial communication controllers, and semiconductor signal-conditioning devices. Its integrated driver and receiver channels reduce the number of separate components required in legacy serial ports, industrial control links, and service interfaces. The three-driver and five-receiver configuration allows one connector to support several RS-232 signals without using five unrelated transceivers. Operation from 3 V to 5.5 V makes the device suitable for systems that use 3.3 V or 5 V control electronics. The specified 250 kbps data rate covers legacy serial communication while providing useful margin below faster RS-485 interfaces. The ±15 kV HBM protection rating strengthens the connector-side interface against electrostatic discharge events. Internally, the MAX3243 uses charge-pump circuitry to generate the voltage levels required by RS-232 transmitters. The three drivers add the required line signal, while the five receivers detect and condition incoming signals. The asymmetric channel count supports designs in which a system transmits on three lines and monitors five incoming lines, including handshake, status, and acknowledgment signals. Typical uses include industrial control panels, data-acquisition equipment, instrumentation, embedded service consoles, and legacy peripheral connections. It is particularly suitable where a modern controller must retain compatibility with an established RS-232 port but also needs a compact multi-channel interface. A single transceiver can consolidate several point-to-point or multidrop-compatible links when the system designer follows the RS-232 topology correctly. PCB design should keep the charge-pump and interface circuitry on the manufacturer's recommended layout and provide the required bypass capacitance close to the supply pins. Keep serial traces short, provide the intended common-mode return path, and use suitable protection networks where cables leave the enclosure. Do not infer that the HBM rating eliminates the need for external surge protection on long or unprotected cable runs. This product page consolidates the manufacturer specifications, channel configuration, source links, drop-in comparison, and implementation guidance into a design-focused reference. Engineers can use the comparison and selection guidance to evaluate the MAX3243CDW alongside pin-compatible alternatives, while the application notes clarify where its 28-pin SOIC interface fits in embedded and industrial serial systems.

詢價 聯絡我們
MAX3243CDWR - 250kbps RS-232 Transceiver | Texas Instruments
MAX3243CDWR

MAX3243CDWR - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243CDWR is a multichannel RS-232 line driver and receiver with three drivers, five receivers, a maximum data rate of 250kbps, and ±15kV HBM ESD protection. It operates from a 3V to 5.5V supply and is packaged in a 28-pin SOIC for surface-mount industrial, communications, and embedded equipment. An RS-232 transceiver is an interface IC that combines a line driver, which converts TTL or CMOS logic signals into RS-232 voltage levels, with a receiver, which converts RS-232 signals back into logic levels. This integration reduces the number of external components required for serial-port interfaces and places both signal-conversion functions in one compact package. The MAX3243CDWR supports a maximum signaling rate of 250kbps while operating across a 3V to 5.5V supply range. Its three drivers support multiple outbound serial channels, and its five receivers provide additional inbound channel capacity. The integrated ±15kV HBM ESD protection helps improve system resilience when a cable port is exposed to electrostatic discharge. The device is designed for conventional RS-232 point-to-point links found in industrial control systems, data-acquisition equipment, service interfaces, and legacy peripheral connections. Because RS-232 uses unbalanced signaling, cable routing and grounding remain important even when the IC itself provides high levels of on-chip ESD protection. The 28-pin SOIC package supports automated assembly and provides separate driver, receiver, ground, and supply connections. Applications can use the additional receiver channels for modem-control signals, hardware handshaking, status inputs, or other low-speed RS-232 signaling where the system requires more receive capability than the three driver channels. When laying out a board, place the transceiver close to the connector and route each interface line directly to its assigned pin. Keep RS-232 traces away from clocks, switching-regulator nodes, and high-speed digital edges. The signal ground reference should be connected through the cable shield or according to the equipment grounding architecture, while chassis and signal grounds should remain separated where required by the interface specification. This page combines the manufacturer specifications, explicit distributor pricing, verified drop-in references, and practical PCB guidance for engineers evaluating the MAX3243CDWR. It also distinguishes documented channel, voltage, speed, protection, and package details from information that requires separate engineering confirmation.

詢價 聯絡我們
MAX3243CDWRG4 - 3/5 RS-232 Transceiver | Texas Instruments
MAX3243CDWRG4

MAX3243CDWRG4 - 3/5 RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3243CDWRG4 is a 3-to-5.5 V multichannel RS-232 line driver and receiver with three drivers, five receivers, a maximum data rate of 250 kbps, and ±15 kV HBM ESD protection. The device is housed in a 28-pin SOIC surface-mount package and is designed for commercial-temperature operation from 0°C to 70°C. It provides a complete interface for translating between RS-232 line-level signals and CMOS/TTL logic-level signals. An RS-232 transceiver is an interface IC used to connect equipment designed around the RS-232 standard to a digital system operating with lower logic voltages. The MAX3243 family combines multiple drivers and receivers in one package, reducing the number of separate interface components required for multiport serial equipment. Its 3-to-5.5 V supply range allows operation from common 3.3 V and 5 V system rails. The three-driver and five-receiver arrangement is suitable for RS-232 connections that require more than one serial channel, including communications equipment, test systems, industrial controllers, and computer peripherals. The 250 kbps maximum signaling rate supports substantially faster data transfer than legacy serial-port equipment commonly designed for lower rates. Integrated ±15 kV human-body-model ESD protection improves system resilience when exposed connector pins encounter electrostatic discharge. MAX3243CDWRG4 is identified as a full RS-232 transceiver with three drivers and five receivers. The manufacturer classifies it as a multichannel line driver/receiver, while the listed operating range allows operation with both 3 V and 5 V supply systems. Its 28-pin SOIC format supports conventional surface-mount assembly and is appropriate for designs where a single package must handle several RS-232 signal directions. Typical uses include industrial serial-control equipment, instrumentation, data-acquisition systems, point-of-sale terminals, and embedded systems that retain an RS-232 interface. Because the device includes both drivers and receivers, it can support two fully independent RS-232 ports while also providing one additional receive channel and additional driver capacity when required by the system architecture. For PCB implementation, place the device close to its RS-232 connector and route driver and receiver outputs as short, well-controlled signal paths. Decoupling capacitors should be connected to the supply and ground pins according to the manufacturer datasheet. The external connector and cable should also provide appropriate surge and ESD protection because the chip's internal HBM rating does not replace system-level connector protection. This product record combines the manufacturer's electrical and packaging information with practical RS-232 design guidance. It also provides structured comparisons, replacement criteria, and application notes to help engineers evaluate integration, protection, channel count, and supply compatibility before assigning the MAX3243CDWRG4 to a PCB.

詢價 聯絡我們
MAX3243CPWR - 250kbps Multichannel RS-232 | Texas Instruments
MAX3243CPWR

MAX3243CPWR - 250kbps Multichannel RS-232 | Texas Instruments

Texas Instruments MAX3243CPWR is a 3-channel driver and 5-channel receiver RS-232 transceiver operating from 3 V to 5.5 V at up to 250 kbps, with ±15 kV HBM ESD protection, in a 28-pin TSSOP (PW) package. It is designed for systems that require multiple low-voltage RS-232 interfaces without using a higher-voltage supply. An RS-232 transceiver is an interface IC that combines line drivers, line receivers, and the charge-pump circuitry needed to generate the positive and negative voltage swings required by RS-232. The MAX3243 belongs to the RS-232 transceiver family within interface ICs, combining digital communication, analog level shifting, and electrostatic-discharge protection in one device. The MAX3243CPWR integrates three RS-232 drivers and five RS-232 receivers, supports data rates up to 250 kbps, and operates from a single 3 V to 5.5 V supply. Its ±15 kV HBM ESD protection is a key feature for ports exposed to cables, connectors, or electrostatic discharge. The device is offered in the 28-pin TSSOP PW package with an operating temperature range of 0°C to 70°C. Technically, the receiver and driver architecture allows multiple RS-232 ports to share common supply and ground rails while maintaining the voltage translation required by the RS-232 standard. On-board charge-pump circuitry supports operation from a supply below the traditional ±12 V RS-232 levels, reducing the external power requirements of portable and embedded equipment. Typical uses include industrial control interfaces, point-of-sale terminals, serial adapters, data-acquisition equipment, and embedded systems that connect to legacy RS-232 peripherals. The three-driver, five-receiver arrangement is particularly useful when a controller needs several transmit paths but fewer receive paths. PCB design should account for the charge-pump capacitors and follow the manufacturer’s recommended decoupling and layout pattern. Keep the RS-232 driver outputs away from sensitive analog or high-speed digital traces, connect the ground reference correctly through the cable interface, and provide protection appropriate to the exposed connector environment. This page organizes the key electrical limits, package information, drop-in alternatives, application guidance, and design considerations for engineers evaluating MAX3243CPWR across industrial and embedded RS-232 designs.

詢價 聯絡我們
MAX3243CPWRG4 - 250kbps RS-232 | Texas Instruments
MAX3243CPWRG4

MAX3243CPWRG4 - 250kbps RS-232 | Texas Instruments

The Texas Instruments MAX3243CPWRG4 is a 3 V to 5.5 V multichannel RS-232 line driver and receiver capable of operating at 250 kbps, with ±15 kV human-body-model ESD protection, in a 28-pin TSSOP package. The device supports three RS-232 driver channels and three receiver channels according to its distributor listing, making it suitable for bidirectional serial data links, industrial equipment, data acquisition systems, and portable instrumentation. An RS-232 interface IC converts logic-level digital signals into RS-232-compatible line levels and converts received line signals back into logic levels. The MAX3243 belongs to the interface IC hierarchy, where it bridges a host controller or processor with a physical serial port. Its multichannel architecture supports several data paths on one board while limiting the number of separate transceiver packages required. The 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails. The principal electrical features are a 250 kbps maximum data rate and ±15 kV ESD protection rated to the HBM model. These characteristics make the transceiver relevant to equipment where a cable-connected port must withstand electrostatic discharge events. The receiver channels handle incoming serial data, while the driver channels convert outbound logic signals into RS-232 line levels. Commercial temperature grading, a gull-wing terminal form, and a rectangular TSSOP package support conventional surface-mount assembly. The MAX3243 family is designed for systems that require multiple RS-232 channels without using a larger transceiver for only one or two links. Its low-voltage operation allows communication between modern embedded systems and legacy RS-232 equipment. Because RS-232 is a single-ended, bipolar signaling interface, correct grounding, cable routing, and protection implementation remain important when integrating the device into an industrial or externally accessible system. Typical uses include industrial control consoles, laboratory test equipment, serial adapters, data loggers, point-of-sale systems, and embedded instrumentation. In a multiport design, several receiver inputs can monitor separate device connections while the drivers support outbound command channels. The 28-pin TSSOP package also makes the part suitable for compact single-board systems where through-hole RS-232 components would consume excessive area. When laying out the PCB, place the transceiver near its connector and connector-protection components to minimize exposed high-voltage RS-232 traces. Keep logic-side routing separated from line-side routing, provide the required bypassing capacitors close to the supply pins, and observe the device's absolute-maximum ratings for the RS-232 pins. Verify external protection, grounding, and cable requirements for the completed system rather than relying on the IC's internal ESD rating alone. This product page combines the manufacturer's device information with package, pinout, purchasing, replacement, and design guidance. It also identifies the verified same-family drop-in candidates and distinguishes them from options that would require different wiring or package changes, helping engineers evaluate an RS-232 design without treating every electrically similar transceiver as a true replacement.

詢價 聯絡我們
MAX3243CUI+ - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices
MAX3243CUI+

MAX3243CUI+ - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243CUI+ is a 3/5-channel RS-232 transceiver with a 3 V to 5.5 V supply, 250 kbps signaling capability, and ±15 kV ESD protection, housed in a 28-pin TSSOP package. It combines three RS-232 drivers and five receivers with AutoShutdown, which reduces supply current to approximately 1 µA when no valid receiver signal is present. The listed 1 k-unit manufacturer price starts at $3.43 as of 2026-10-30. An RS-232 transceiver is a serial-interface semiconductor that converts logic-level signals into RS-232 line levels and converts received line levels back into digital logic. The MAX3243 belongs to the interface IC hierarchy, where it combines drivers and receivers in one package. AutoShutdown is particularly useful for battery-powered equipment because it removes the need for a separate software-controlled power path when the serial link is idle or disconnected. The principal operating features include a 3.0 V to 5.5 V supply range, operation up to 250 kbps, integrated charge-pump circuitry, and ±15 kV ESD protection on the serial interface. The device supports both 3 V and 5 V systems, allowing the same transceiver architecture to serve industrial controls, embedded equipment, and legacy RS-232 ports. Its three drivers and five receivers provide flexible channel allocation for peripheral buses, service consoles, and point-to-point links. Technically, the MAX3243 family uses an efficient on-board power supply to generate the positive and negative voltages required by RS-232 transmitters from a single supply. The verified manufacturer page identifies the MAX3243 as production, with a product datasheet at Revision 10. The MAX3243CUI+ ordering code uses the compact TSSOP-28 package, making it suitable for space-constrained industrial-control and communications boards. Typical applications include industrial serial adapters, embedded instrumentation, POS terminals, diagnostic consoles, and communications equipment requiring both transmit and receive paths. It is especially useful where automatic power reduction is valuable, such as battery-operated test instruments or systems whose RS-232 port is only active during maintenance. The 250 kbps maximum data rate supports moderate-speed command and control traffic. When laying out the circuit, preserve the recommended charge-pump capacitor connections and place bypass capacitance close to the supply pins. Keep RS-232 traces away from sensitive analog signals, provide the required protection network if exposed to user cables, and verify the receiver polarity and logic thresholds of the connected equipment. The supplied data does not include a complete pin table, so pin assignments should be confirmed against the manufacturer datasheet before layout release. This page combines the verified manufacturer specifications, distributor pricing, package information, supported drop-in candidates, comparison parameters, and practical RS-232 design guidance. It is intended to help engineers identify the correct replacement and plan power, layout, and signal-integrity requirements without relying on distributor summaries alone.

詢價 聯絡我們
MAX3243CUI+G1Z - 3/5 RS-232 Transceiver | Analog Devices
MAX3243CUI+G1Z

MAX3243CUI+G1Z - 3/5 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243CUI+G1Z is a 3-driver, 5-receiver RS-232 transceiver with a 1 uA supply current, a true +3 V to +5.5 V supply range, and AutoShutdown operation. The device is offered in a 28-pin TSSOP package for compact industrial, embedded, and communications equipment. Its receiver architecture includes five receiver outputs, including a complementary always-active receiver for external monitoring. A multi-driver RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible outputs. Within the signal-chain hierarchy, the MAX3243CUI+G1Z is an RS-232 transceiver, a serial-interface component, an interface IC, and ultimately a semiconductor. It is intended for systems that need multiple driver channels and more receiver channels than a conventional two-driver, two-receiver transceiver provides. The principal feature is its combination of three drivers and five receivers in one package. AutoShutdown reduces supply current to 1 uA when the receiver inputs do not detect a valid signal level, helping conserve power in systems that remain connected intermittently. Operation from +3 V to +5.5 V supports both 3.3 V and 5 V logic environments. The complementary always-active receiver provides a monitoring path for designs that require an output to remain observable when the principal receiver channels are inactive. The MAX3243CUI+G1Z belongs to the MAX3221, MAX3223, and MAX3243 family of low-power RS-232 transceivers. Maxim describes a 1 uA supply-current implementation using AutoShutdown technology. This device is the 3-driver, 5-receiver member and is distinct from lower-channel-count family members by providing five receiver outputs, including the always-active monitoring receiver. The 28-pin TSSOP format supports conventional surface-mount assembly while accommodating the additional receiver and driver connections. Typical applications include industrial serial-port equipment, barcode scanners, point-of-sale terminals, embedded control systems, instrumentation, and systems that connect a controller to multiple RS-232 peripherals. The three driver outputs can support several unidirectional RS-232 links, while five receiver inputs accommodate multiple incoming data or control signals. The 1 uA low-power state is particularly useful where the interface must remain attached to a host without continuously consuming full operating power. Design the circuit with the electrical requirements of RS-232 in mind. Driver outputs require the appropriate external charge-pump and protection network specified by the manufacturer, and receiver inputs should receive protection appropriate to the exposed cable environment. Confirm the complete 28-pin assignment, logic levels, and capacitor values in the manufacturer datasheet before layout release. This product page combines package, channel-count, supply-range, and low-power details with practical selection guidance. It also identifies same-family alternatives and explains where an exact drop-in interchange requires confirmation of temperature grade, suffix code, and exposed loading conditions.

詢價 聯絡我們
MAX3243CUI+T - 3/5 250kbps RS-232 Transceiver | Analog Devices
MAX3243CUI+T

MAX3243CUI+T - 3/5 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3243CUI+T is a 3-driver, 5-receiver full-duplex RS-232 interface transceiver operating from 3 V to 5.5 V, with data rates up to 250 kbps and protection to ±15 kV ESD, housed in a 28-pin TSSOP package. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic. The MAX3243 belongs to the transceiver family within the broader hierarchy of interface ICs, communication semiconductors, and integrated circuits. It is particularly useful where several serial ports share a limited connector or enclosure and low supply current is important. Key features include three RS-232 drivers, five RS-232 receivers, 3 V to 5.5 V operation, and data rates up to 250 kbps. AutoShutdown circuitry detects whether valid receiver activity is present and disables the on-board supply and drivers when the port is inactive. The manufacturer describes a supply current as low as 1 µA during shutdown, making the device suitable for power-conscious embedded and portable equipment. A complementary always-active receiver supports external monitoring in selected applications. The MAX3243 supports both 3.3 V and 5 V system rails. This operating range permits the same transceiver to interface with modern low-voltage CMOS controllers as well as established 5 V logic. Its integrated charge-pump circuitry supports the positive and negative RS-232 voltage levels required by the interface standard, while the ±15 kV ESD rating strengthens protection against cable-connected electrostatic discharge events. Typical uses include industrial control systems, serial-port adapters, test equipment, point-of-sale terminals, data-acquisition equipment, and embedded console interfaces. In a multiport installation, the three drivers can support three outbound channels while five receivers provide inbound monitoring. Designers should nevertheless confirm the required channel direction, electrical standard, connector protection, and system grounding for each cable interface. For layout, place the device close to the connector and route RS-232 traces away from clocks, switching nodes, and sensitive analog inputs. Keep the transmit and receive paths arranged to minimize differential crosstalk, follow the manufacturer’s recommended charge-pump capacitor connections, and provide local supply bypassing. The ±15 kV rating is a device-level specification and does not replace appropriate cable, connector, and board-level protection. This page combines the MAX3243 family specifications, verified ordering information, same-footprint alternatives, and practical interface-design guidance. It also distinguishes confirmed drop-in candidates from alternatives that require pinout and signal-direction review before use in an existing 28-pin TSSOP design.

詢價 聯絡我們
MAX3243CUI+TG1Z - 3V/5V RS-232 Transceiver | Analog Devices
MAX3243CUI+TG1Z

MAX3243CUI+TG1Z - 3V/5V RS-232 Transceiver | Analog Devices

Analog Devices MAX3243CUI+TG1Z is a 3/5 RS-232 transceiver integrated circuit with 1 uA supply current, a +3 V to +5.5 V operating range, and AutoShutdown functionality, supplied in a 28-pin TSSOP package. The MAX3243 family combines a driver, receiver, and charge-pump circuitry for bidirectional RS-232 interfaces while reducing the external support components normally required by conventional transceivers. An RS-232 transceiver is an interface IC that converts between logic-level signals and RS-232 voltage levels. The driver converts low-voltage logic signals into RS-232 levels, while the receiver translates RS-232 inputs back into logic-compatible signals. As a communications interface IC within the broader semiconductor and interface-controller hierarchy, it connects equipment or microcontrollers using the EIA RS-232 standard with logic peripherals operating at lower voltage levels. The MAX3243CUI+TG1Z provides three driver and three receiver channels, allowing up to three bidirectional RS-232 links when the transmitter and receiver directions are assigned appropriately. Its operating voltage of +3 V to +5.5 V supports both 3.3 V and 5 V system environments. The stated 1 uA supply current is the principal low-power feature, while AutoShutdown disables the internal load when no valid receiver activity is detected. AutoShutdown makes the device suitable for battery-operated and intermittently connected equipment because the on-board power supply and drivers can shut down during idle periods. A receiver can subsequently reactivate the device when a valid signal appears. This architecture supports portable equipment, diagnostics, industrial controllers, and point-to-point serial links where reducing standby consumption is more important than maintaining continuously active drivers. Typical uses include industrial serial adapters, service equipment, barcode and data-acquisition systems, USB-to-RS-232 interface boards, and embedded controller links. Designers should treat the MAX3243CUI+TG1Z as a single-channel-direction transceiver block rather than a full UART. The connected microcontroller or system logic must provide UART signaling, while the MAX3243 handles the physical RS-232 electrical interface. For PCB implementation, follow the pin-description and typical-application circuits in the manufacturer datasheet for bypass-capacitor placement and charge-pump layout. Keep the connector-side traces short, provide the specified ceramic bypass capacitance close to the device, and use an appropriate protection network when exposed cables carry ESD or surge transients. Confirm the connector gender and signal assignment before fabrication because RS-232 wiring conventions are not interchangeable like UART logic. This product page consolidates the core electrical ratings, package information, application guidance, and traceable source links for engineers evaluating the MAX3243CUI+TG1Z. It also organizes design considerations around AutoShutdown behavior, low-power operation, RS-232 signal levels, and implementation risks so the part can be selected and integrated more efficiently.

詢價 聯絡我們
MAX3243CWI+ - 3/5 RS-232 Transceiver | Analog Devices
MAX3243CWI+

MAX3243CWI+ - 3/5 RS-232 Transceiver | Analog Devices

Analog Devices MAX3243CWI+ is a 3V-to-5.5V RS-232 transceiver with three line drivers, five line receivers, a 250 kbps data rate, and ±15 kV HBM ESD protection, housed in a 28-pin SOIC package. The device supports both 3V and 5V system rails and includes AutoShutdown, which disables the onboard charge pump and drivers when no valid receiver signal is present. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. This bidirectional level-conversion function places the MAX3243CWI+ between a host controller or data-processing equipment and an external serial port. Its three-driver, five-receiver arrangement is particularly suited to DE-9 serial interfaces and equipment requiring additional receive channels for status, handshake, or ring-detection signals. Key features include a 3V-to-5.5V operating range, 250 kbps maximum signaling rate, and ±15 kV ESD protection on serial-port connections. AutoShutdown helps reduce power consumption when the connected RS-232 port has no valid activity. The INVALID output remains available to report the status of received RS-232 signals, while ROUT2B provides a second receiver output for applications that need an additional input or status function. The MAX3243CWI+ uses Maxim Integrated’s RS-232 interface architecture and is offered in a 28-pin SOIC package. Its driver and receiver organization supports asymmetric port requirements without requiring five separate line-driver circuits. The 3V-to-5.5V supply range makes the device usable in both legacy 5V serial equipment and modern embedded systems operating from lower-voltage rails. Typical applications include DE-9 RS-232 ports, industrial serial adapters, point-of-sale equipment, instrumentation, data acquisition systems, and embedded control systems. In a typical design, logic-level TX and RX signals connect to the transceiver, while the protected driver outputs connect through the external DB-9 connector or another RS-232 connector. Additional receiver inputs can monitor modem-control or equipment-status lines. Designers should account for the voltage drop across the RS-232 line, use protection appropriate to the connector environment, and maintain the supply and ground connections required by the manufacturer interface guidance. The AutoShutdown behavior should also be verified against the system’s power-management strategy, especially when a disconnected or idle connector must be recognized reliably. This page consolidates verified manufacturer and distributor information, package-level alternatives, technical comparisons, and practical design guidance for engineers evaluating the MAX3243CWI+ in 3V-to-5.5V RS-232 interface designs.

詢價 聯絡我們
MAX3243CWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices
MAX3243CWI+T

MAX3243CWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices

Analog Devices MAX3243CWI+T is a 3-driver, 5-receiver RS-232 transceiver operating from 3 V to 5.5 V at up to 250 kbps, with ±15 kV ESD protection, in a 28-pin wide SOIC package. The MAX3243 family also provides a complementary always-active receiver for external monitoring and an AutoShutdown supply circuit that can reduce supply current to 1 µA when no valid receiver signal is detected. An RS-232 transceiver is an interface IC that converts between single-ended RS-232 line levels and complementary TTL or CMOS logic levels. Within the broader signal-chain hierarchy, the MAX3243 belongs to the RS-232 transceiver class, then to line-driver and receiver ICs, interface ICs, and ultimately semiconductor devices. Its integrated drivers, receivers, charge-pump supply, and logic-side functions simplify asynchronous serial-interface implementation. The principal operating parameters are a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three transmit channels, five receive channels, and ±15 kV ESD protection. AutoShutdown is particularly useful in battery-powered and intermittently connected equipment because the internal supply and drivers stop operating when the receiver inputs do not detect a valid signal level. The commercial-temperature ordering code and 28-pin wide SOIC package support conventional surface-mount assembly. The MAX3243 architecture combines charge-pump-assisted RS-232 level generation with digital receiver thresholding and TTL-compatible control inputs. The always-active receiver permits monitoring of a remote connection even while the principal transceiver supply is shut down. This combination is useful in communications, instrumentation, industrial control, and service equipment where several RS-232 ports share a compact board area. Typical uses include multiport RS-232 port expansion, configuration interfaces for industrial equipment, service-console links, data-acquisition systems, and legacy peripheral connectivity. A 250 kbps data rate supports moderate-speed control traffic, while three drivers and five receivers cover asymmetric port requirements such as one PC connecting to several instruments or peripherals. PCB design should provide the charge-pump capacitors and supply capacitors close to their designated pins, keep RS-232 traces away from sensitive analog signals, and route the three driver outputs directly toward their connector or protection network. The wide SOIC footprint requires adequate lead spacing and solderability suitable for the component body size and terminal pitch. This product overview combines the manufacturer's electrical characteristics with package, interface, application, layout, and sourcing guidance. It also distinguishes true same-package drop-in alternatives from devices with different footprints, helping engineers evaluate replacements before committing a new PCB revision.

詢價 聯絡我們
MAX3243EAI+ - 3/5 RS-232 Transceiver, 235kbps | Maxim
MAX3243EAI+

MAX3243EAI+ - 3/5 RS-232 Transceiver, 235kbps | Maxim

The Maxim Integrated MAX3243EAI+ is a 3.3 V/5 V RS-232 transceiver with three line drivers, five line receivers, and a maximum data rate of 235 kbps, housed in a 28-pin SSOP package. It operates from +3 V to +5.5 V, supports automatic shutdown and wake-up, and provides enhanced electrostatic-discharge protection for connection pins. An RS-232 transceiver is an interface IC that converts between logic-level UART signals and the voltage-domain signals used by RS-232 equipment. The MAX3243 belongs to the broader EIA/TIA-232 interface family, which sits between serial communication controllers and external D-sub connectors or other RS-232 links. Its three transmitters support multiple outbound channels, while five receivers provide additional inbound or monitoring channels. The MAX3243EAI+ uses a dual charge-pump circuit to generate the voltage levels required by RS-232 transmitters. According to the Analog Devices MAX3243 data sheet, the MAX3243E family provides ±15 kV HBM and air-gap ESD protection and ±8 kV contact-discharge protection. Automatic shutdown reduces supply current to 1 µA when active communication is not required, while wake-up operation helps lower system power consumption. The device supports operation from +3 V to +5.5 V, making it suitable for systems using either 3.3 V or 5 V digital logic. Its stated maximum data rate of 235 kbps exceeds the throughput commonly required by conventional asynchronous serial ports. The 28-pin SSOP package provides a compact surface-mount solution, although the relatively long lead span and limited pin count should be considered in high-density layouts. Typical applications include multi-channel RS-232 links in industrial controllers, test equipment, point-of-sale terminals, data acquisition systems, instrumentation, and external serial-port expansion. The three drivers are useful where one controller must connect to multiple peripheral ports, while the five receivers can handle return channels or multiple incoming data sources. PCB implementation should place charge-pump capacitors and the interface-side protection network close to the device, keep RS-232 traces away from sensitive logic, and provide suitable return paths for surge current. The unused driver outputs and receiver inputs must be terminated according to the manufacturer's data sheet rather than left floating. This page consolidates verified manufacturer and distributor information, price context, pin-package details, practical interface-design guidance, and candid replacement analysis. It also distinguishes electrically similar MAX3243 variants that are not true same-package drop-ins, helping engineers avoid assumptions based only on the MAX3243 family name.

詢價 聯絡我們
MAX3243EAI+G1Z - 250kbps RS-232 Transceiver | Analog Devices
MAX3243EAI+G1Z

MAX3243EAI+G1Z - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243EAI+G1Z is a 3.5 V RS-232 line driver and receiver interface IC with three transmit drivers, five receive receivers, and 250 kbps data-rate capability, housed in a 28-pin SSOP package. The device operates from a 3 V to 5.5 V supply, features ±15 kV ESD protection, and includes AutoShutdown power management. An RS-232 transceiver is the electrical interface between a digital UART or asynchronous communication controller and a serial connector. It converts low-voltage CMOS logic levels into RS-232-compatible levels and receives RS-232 signals for conversion back to logic levels. The MAX3243 belongs to the RS-232 interface IC, communications-interface, and power-management semiconductor hierarchy. The MAX3243E family combines three drivers and five receivers in a single device, allowing several serial functions or an additional monitoring receiver to share one interface. Its ±15 kV ESD protection applies to the serial-port connection pins, while its 250 kbps capability supports data rates above the conventional 115.2 kbps rate commonly used by legacy UART equipment. A dual charge-pump circuit supports the voltage conversion required by RS-232. The MAX3243E family also provides automatic shutdown and wake-up behavior, reducing supply current when no valid receiver signal is present. The MAX3243EAI+G1Z is identified as a 28-pin SSOP industrial-temperature ordering configuration, although detailed temperature and package dimensions should be confirmed against the ordering information in the manufacturer datasheet before release. Typical uses include multiport serial adapters, industrial equipment interfaces, POS terminals, instrumentation, data-acquisition systems, and embedded controller links. The five receivers are especially useful when a system needs more incoming channels than the three outgoing driver channels, such as monitor, status, or handshake signals. For a new PCB, place the charge-pump capacitors and interface bypass capacitors exactly as shown in the manufacturer’s recommended layout. Route TX and RX traces away from sensitive analog circuitry, keep the connector-side protection path short, and verify signal levels, ground references, and supply sequencing before production. This page consolidates the manufacturer’s interface details, ordering information, application guidance, and available substitution research into a design-focused guide. It also identifies where an exact drop-in alternative is confirmed and where a proposed substitute requires careful pinout and protocol validation before use.

詢價 聯絡我們
MAX3243EAI+TG1Z - 3.3V RS-232 Transceiver | Analog Devices
MAX3243EAI+TG1Z

MAX3243EAI+TG1Z - 3.3V RS-232 Transceiver | Analog Devices

Analog Devices MAX3243EAI+TG1Z is a 3-transmitter, 5-receiver RS-232 communications interface IC operating from +3 V to +5.5 V, supplied in a 28-pin SSOP package. The family supports EIA/TIA-232 and V.28/V.24 communications, automatic shutdown and wakeup behavior, high-data-rate operation, and enhanced electrostatic-discharge protection. Its 1 A supply-current rating identifies it as the MAX3243E family member suited to multi-port RS-232 equipment. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level voltages. It belongs to the transceiver class within interface ICs and ultimately to the broader semiconductor and wired-communications hierarchy. The MAX3243 combines three transmitters, five receivers, and an always-active receiver designed for external monitoring, reducing the number of separate interface devices required in multi-channel equipment. Principal features include three powered drivers, five receiver channels, operation from a 3 V supply, automatic shutdown and wakeup functions, and enhanced ESD protection. The automatic power-control functions help a system reduce consumption when the communication port is idle, while the always-active receiver permits continuous monitoring of an external RS-232 connection. These functions are especially useful in industrial controllers, test equipment, and embedded systems that combine communication and low-power operating modes. The MAX3243E family is built for bidirectional point-to-point serial links using the EIA/TIA-232 standard. Each transmitter provides the voltage swing required by an RS-232 receiver, and each receiver translates the bipolar line voltage into a compatible digital signal. The interface operates from the same 3 V to 5.5 V supply range used by many modern embedded processors, reducing the need for a separate high-voltage interface supply. Exact data-rate, slew-rate, propagation-delay, and channel-isolation limits should be taken from the manufacturer datasheet for the selected temperature and supply conditions. Typical applications include multi-port RS-232 instrumentation, industrial serial controllers, data-acquisition equipment, point-of-sale terminals, and service interfaces for embedded systems. The five receivers are useful when the product must monitor more than one incoming RS-232 signal, while three transmitters support several outbound connections. In portable or industrial equipment, automatic shutdown and wakeup can help control current use when no active peer device is present on the bus. PCB design should preserve the RS-232 interface’s intended impedance and noise behavior, with short connections between the transceiver, protection network, connector, and ground structure. Place the interface-supply decoupling capacitor close to the device and route high-current return paths away from sensitive logic. Before a board revision, verify every signal, enable, and supply connection against the manufacturer pin-description table for the 28-pin SSOP variant. This page combines the manufacturer’s family-level capabilities with exact package and ordering information for MAX3243EAI+TG1Z, then adds application guidance, design checks, and compatible family references. It is intended to help engineers confirm supply compatibility, channel count, package reuse, and the design implications of automatic RS-232 shutdown before releasing a PCB or production build.

詢價 聯絡我們
MAX3243ECAI+ - 3V/5V 250kbps RS-232 Transceiver
MAX3243ECAI+

MAX3243ECAI+ - 3V/5V 250kbps RS-232 Transceiver

The Maxim Integrated MAX3243ECAI+ is a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface with three drivers, five receivers, automatic shutdown/wakeup, high data-rate operation, and enhanced electrostatic-discharge protection. It operates from 3.0V to 5.5V and supports data rates up to 250kbps. The device is packaged in a 28-pin SSOP, making it suitable for compact RS-232 equipment designs. An RS-232 transceiver is an interface IC that converts between digital logic-level signals and RS-232 voltage levels. The MAX3243 family belongs to the interface-IC hierarchy and is used where a UART or other digital controller must communicate with a PC, terminal, modem, or other RS-232 equipment. Its multiple drivers and receivers support both standard serial links and additional status or control signals. Key features include automatic shutdown when no valid receiver signal is detected, automatic wakeup when a valid signal returns, and enhanced ESD protection. The manufacturer describes protection to ±15kV using the air-gap discharge test and ±8kV using the contact-discharge test. The available data also identifies the device as a 3/5 transceiver with a 250kbps data-rate capability. The MAX3243E architecture is intended for low-power serial-interface systems. Automatic shutdown can reduce supply consumption when the RS-232 connection is idle, while wakeup allows the interface to reactivate without a continuously active supply state. The device is designed for 3V-powered equipment where RS-232 voltage generation and signal conditioning are required despite low logic supply voltage. Typical applications include PC serial-port interfaces, industrial control equipment, data acquisition systems, point-of-sale terminals, and embedded serial adapters. The combination of multiple drivers, five receivers, automatic power management, and ESD protection supports both data transfer and hardware status signaling in compact embedded systems. Designers should verify the exact pin assignments, external charge-pump capacitors, logic levels, and RS-232 line requirements against the manufacturer datasheet. PCB layout should keep the interface traces short, provide suitable return paths, and account for the elevated RS-232 voltage levels at the driver outputs.

詢價 聯絡我們
MAX3243ECAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices
MAX3243ECAI+G1Z

MAX3243ECAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243ECAI+G1Z is a 3-driver, 5-receiver RS-232 transceiver operating from 3.0 V to 5.5 V, supporting data rates up to 250 kbps in a 28-pin SSOP package. It combines three EIA/TIA-232 transmitters, five receivers, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection for robust serial-interface designs. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential-voltage RS-232 levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the signal-chain hierarchy, the MAX3243 belongs to the RS-232 interface transceiver family, within interface ICs and broader communication semiconductors. Its multi-channel organization allows one device to support several data and control lines while reducing package count and PCB area. The MAX3243 family supports operation from 3.0 V to 5.5 V, enabling use in both 3.3 V and 5 V systems. Its maximum signaling rate is 250 kbps, and the on-board charge-pump transmitter circuitry provides the voltage levels required by RS-232 links. Automatic shutdown reduces supply current to approximately 1 microampere when no valid receiver activity is detected, while wake-up operation restores normal operation when a valid signal returns. Enhanced ESD protection is a defining feature of this interface family. According to the manufacturer datasheet, transmitter outputs and receiver inputs are protected to plus or minus 15 kV using the IEC 1000-4-2 air-gap discharge test and to plus or minus 8 kV using the IEC 1000-4-2 contact-discharge test. These ratings are relevant for cables exposed to electrostatic discharge, although the complete system still requires suitable grounding and board-layout practices. Typical applications include industrial serial-port equipment, data-acquisition systems, instrumentation, point-of-sale terminals, and embedded control modules that need several RS-232 channels. The three transmitters support outbound data, modem-control, or handshake signals, while the five receivers support inbound data, status, and monitoring lines. The complementary always-active receiver provides external monitoring when the main receiver circuitry is shut down. When implementing the MAX3243ECAI+G1Z, follow the manufacturer pin-description and typical-application circuits for supply bypassing, charge-pump capacitors, and connector-side protection. Keep RS-232 traces away from sensitive analog signals, provide a low-impedance ground path, and verify that every connected cable signal remains within the device's absolute-maximum ratings. This product data combines manufacturer specifications, package and channel-count details, application guidance, and verified drop-in alternatives. It also highlights the differences that matter when deciding whether another MAX3243 order code can replace the target without changing the PCB footprint.

詢價 聯絡我們
MAX3243ECAI+T - 3/5 RS-232 Transceiver, 15kV ESD | Analog Devices
MAX3243ECAI+T

MAX3243ECAI+T - 3/5 RS-232 Transceiver, 15kV ESD | Analog Devices

The Analog Devices MAX3243ECAI+T is a 3-driver, 5-receiver RS-232 transceiver operating from 3.0V to 5.5V, supporting data rates up to 250kbps and providing ±15kV ESD protection on serial-port pins. The device is packaged in a 28-pin SSOP and includes AutoShutdown and automatic wake-up functions to reduce supply current when no valid receiver activity is detected. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and RS-232 differential line drivers and receivers. The MAX3243 belongs to the hierarchy of interface ICs, serial-interface transceivers, RS-232 communications devices, and semiconductors. It allows a modern low-voltage controller to communicate with legacy RS-232 equipment without requiring external ±12V power rails. The MAX3243 integrates three RS-232 line drivers, five receivers, and a dual charge-pump circuit. Its 3.0V-to-5.5V single-supply operation supports both 3.3V and 5V systems. An internal charge pump generates the bipolar voltage required by RS-232 transmitters, while enhanced electrostatic-discharge protection improves resilience when cables are connected to external equipment. The E suffix identifies the enhanced ESD version, and the CAI suffix denotes the 28-pin SSOP configuration with a commercial temperature grade. Automatic shutdown is a significant benefit in portable and low-power equipment. According to the manufacturer product page, the MAX3243 can reach a 1µA supply current when AutoShutdown is active and no valid signal appears at the receiver inputs. The device can wake automatically when receiver activity resumes, or shutdown can be controlled in software, allowing the interface to remain transparent to normal serial-port operation. Typical uses include industrial serial adapters, point-of-sale equipment, data-acquisition systems, test instrumentation, and embedded controllers that must connect to RS-232 peripherals. Three drivers allow transmission on as many as three lines, while five receivers support monitoring of five incoming signals. The 250kbps capability exceeds the speed required by many legacy serial protocols and is useful for short-distance point-to-point links. PCB design should keep charge-pump and high-voltage driver traces away from sensitive receiver and logic-ground paths. Place the required bypass capacitors close to their supply and ground pins, route connector-side signals according to the manufacturer pinout, and provide chassis grounding or surge-protection components where cables leave the enclosure. Confirm the receiver's active polarity and AutoShutdown timing in firmware before replacing a conventional RS-232 implementation. This product record combines the manufacturer specifications, exact-package identification, lifecycle information, sourcing context, and drop-in alternatives with practical guidance for layout, power management, and signal-integrity review.

詢價 聯絡我們
MAX3243ECDB - 3/5 RS-232 Transceiver | Texas Instruments
MAX3243ECDB

MAX3243ECDB - 3/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243ECDB is a 3-to-5.5-V multichannel RS-232 line driver and receiver providing three drivers, five receivers, and a dual charge-pump circuit in a 28-pin SSOP package. It supports data rates up to 250 kbps and includes ±15 kV ESD protection for HBM and IEC61000-4-2 air-gap discharge, plus ±8 kV IEC61000-4-2 contact-discharge protection on serial-port connection pins. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals between a host controller and a cable-based serial port. It belongs to the hierarchy of interface ICs, serial transceivers, and communication-interface semiconductors. The MAX3243ECDB implements the electrical interface required by TIA/EIA-232-F while operating from a single 3-to-5.5-V supply, eliminating the need for a separate bipolar power rail in many applications. The device combines three RS-232 drivers, five receivers, and automatic direction control through on-chip charge pumps. Its 250-kbps capability supports asynchronous data links while its 3-to-5.5-V supply range accommodates both 3.3-V and 5-V system rails. ESD ratings of ±15 kV on HBM and air-gap discharge, and ±8 kV on contact discharge, improve protection where cables connect to user-accessible equipment. The MAX3243E device architecture supports the electrical interface between an asynchronous communication controller and a personal computer or terminal. The integrated charge-pump circuitry generates the RS-232 bipolar voltage levels required by the drivers from the low-voltage system supply. This integration reduces board area by removing external charge-pump capacitors while preserving the required interface voltage swing. Typical uses include industrial serial consoles, data-acquisition equipment, instrumentation, point-of-sale terminals, and embedded systems that need more receivers than drivers. The five receiver channels support monitoring of several status signals, while three driver channels handle transmit, request-to-send, and data-ready control lines. A 28-pin SSOP is useful when the interface density must remain higher than a 16-pin SOIC can accommodate. When laying out this transceiver, route each connector-side signal away from logic and clock traces, and place the charge-pump capacitor and interface bypass capacitors close to their specified pins. Confirm that the selected cable-side baud rate is supported by the 250-kbps device rating and that firmware honors the receiver and driver channel assignments shown in the manufacturer datasheet.

詢價 聯絡我們
MAX3243ECDBG4 - 500kbps RS-232 IC | Texas Instruments
MAX3243ECDBG4

MAX3243ECDBG4 - 500kbps RS-232 IC | Texas Instruments

Texas Instruments MAX3243ECDBG4 is a 3 V to 5.5 V multichannel RS-232 line driver and receiver operating at up to 500 kbps, with ±15 kV IEC ESD protection and a 28-pin SSOP package. The commercial-temperature ordering option supports system designs requiring a compact multichannel RS-232 interface operating from 0°C to 70°C. An RS-232 line transceiver combines driver and receiver functions for connecting logic-level equipment to a serial port. The driver converts low-voltage logic signals into RS-232-compatible levels, while the receiver converts incoming differential or single-ended serial signals back into logic levels. This transceiver category belongs to the interface IC hierarchy: RS-232 transceiver → interface IC → semiconductor. It is useful when a system needs more than one serial channel, particularly in data acquisition, control, industrial communications, and legacy peripheral equipment. Key features of the MAX3243ECDBG4 include a 3 V to 5.5 V supply range, multichannel RS-232 operation, data rates up to 500 kbps, and ±15 kV IEC ESD protection. The protection rating helps improve system resilience when the serial connector is exposed to electrostatic discharge, although board-level layout, grounding, and connector shielding remain important parts of an effective ESD strategy. The MAX3243E family is designed for compatible with EIA-232 communication requirements and is suitable for systems that need multiple RS-232 drivers and receivers in one package. Its integrated multichannel arrangement reduces the number of separate transceiver packages required on a communications board while conserving board area and simplifying the connection of several serial ports. Typical applications include industrial control systems, laboratory data loggers, POS terminals, embedded instrumentation, and host systems that connect to legacy RS-232 peripherals. The 500 kbps capability supports substantially faster serial links than a conventional low-speed RS-232 port, while the 3 V to 5.5 V supply range allows use with both 3.3 V and 5 V system rails. Designers should follow the manufacturer datasheet for charge-pump capacitor selection, supply decoupling, driver and receiver pin assignments, and exposed-circuit details. Because the MAX3243ECDBG4 uses a narrow-body SSOP package, PCB layout should provide adequate copper and solder-joint area for reliable assembly. This product page consolidates the device function, operating limits, protection rating, package information, sourcing path, and design considerations into one engineering reference. It also identifies genuinely relevant replacement questions and emphasizes direct-footprint verification instead of treating every RS-232 transceiver as a drop-in substitute.

詢價 聯絡我們